Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Immobilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

FY24 Development of Improved Grout Waste Forms for Alternative Low Activity Waste Treatment

Since the WTP Low Activity Waste (LAW) Vitrification Facility was not designed to process the entire inventory of Hanford LAW, up to half of the retrieved Hanford LAW will require supplemental immobilization. Immobilizing LAW in a cementitious waste form known as Cast Stone has been investigated as a possible candidate supplemental immobilization technology. In FY21, Washington River Protection Solutions, LLC (WRPS) tasked Atkins and the Vitreous State Laboratory (VSL) of The Catholic University of America (CUA) to perform testing to evaluate methods for reducing the release of COCs, particularly nitrate, 99Tc, and 129I, from cementitious waste forms made from aqueous LAW derived from Hanford Tank Waste. FY22 work built on the FY21 results and further developed formulations while targeting higher waste loadings. The objective of this work was to perform laboratory-scale testing to further refine the most promising formulation(s) that were identified in the FY23 work. The goal of the refinement was to further reduce the release rates for 99Tc, Cr, 129I, and nitrate while maintaining workability of the fresh grout, and to increase waste loading.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Determining Drying Conditions to Mitigate Hanford Double Shell Storage Tank Underside Corrosion — Phase 1

The Hanford Site in Washington State has legacy radiological waste that is being retrieved from single shell tanks (SSTs) and transferred to newer, double shell tanks (DSTs) for eventual closure of the SSTs. The waste is maintained in the DSTs until eventual immobilization can be performed at the Waste Treatment and Immobilization Plant (WTP), currently under construction. Until full immobilization is complete, extended service of the DSTs must be ensured by mitigating corrosion of the steel tank walls and buried steel pipelines. A Pit Air Supply System has been developed to mitigate corrosion of the leak detection pits connected to the concrete foundations of the DSTs. The objectives for the present study are: (i) to corrode steel specimens in an electrolytic simulant to form artificial pits with specific pit depths, and (ii) to determine the temperature and humidity levels that will mitigate further pit growth. Experimental work and results will be presented to evaluate conditions associated with the PASS system and predict corrosion rates when the PASS is operating.

Atmospheric Corrosion↗
DOE OSTI2025

Organic Acid-Assisted Thermal Dehalogenation of Halide Salt Nuclear Wastes: From Waste Salts to Borosilicate Glass

Only a handful of high-halide salt waste forms have been demonstrated for vitrification-based immobilization strategies for halide-salt nuclear waste streams (e.g., pyroprocessing wastes, molten salt reactor wastes) and they all have low waste loading potential and most have low chemical durabilities for high-alkali streams. An alternative approach to direct salt immobilization is salt partitioning prior to waste form fabrication and one option for partitioning is halide removal (called dehalogenation). Removing the halogen fraction through dehalogenation can significantly reduce the waste volume required for disposal in the primary waste form. Furthermore, when dehalogenation is performed using organic acids, the dehalogenation reagent can decompose during high-temperature vitrification, reducing waste loading limitations in the waste form. In the current work, different organic acids (i.e., oxalic, formic, acetic, oxamic, and citric) were evaluated for dehalogenation efficiency of a simple chloride salt simulant (7.19% LaCl 3 , 53.77% LiCl, and 39.04% KCl, by mole) and a more complex chloride salt simulant called ERV3 (electrorefiner version 3) at 150 °C–300 °C and using H + /Cl – molar ratios of 1:1, 2:1, and 3:1. Additionally, a borosilicate glass waste form called TARS (or the average of refined specifications) was formulated, produced, and characterized for dehalogenated ERV3.

Amorphous materials↗
DOE OSTI2024

Enhanced Interfacial Electron Transfer in Photocatalyst-Natural Enzyme Coupled Artificial Photosynthesis System: Tuning Strategies and Molecular Simulations

Laccase is capable of catalyzing a vast array of reactions, but its low redox potential limits its potential applications. The use of photocatalytic materials offers a solution to this problem by converting absorbed visible light into electrons to facilitate enzyme catalysis. Herein, MIL-53(Fe) and NH 2 -MIL-53(Fe) serve as both light absorbers and enzyme immobilization carriers, and laccase is employed for solar-driven chemical conversion. Electron spin resonance spectroscopy results confirm that visible light irradiation causes rapid transfer of photogenerated electrons from MOF excitation to T1 Cu(II) of laccase, significantly increasing the degradation rate constant of tetracycline (TC) from 0.0062 to 0.0127 min -1 . Conversely, there is only minimal or no electron transfer between MOF and laccase in the physical mixture state. Theoretical calculations demonstrate that the immobilization of laccase's active site and its covalent binding to the metal-organic framework surface augment the coupled system's activity, reducing the active site accessible from 27.8 to 18.1 Å. In conclusion, the constructed photo-enzyme coupled system successfully combines enzyme catalysis’ selectivity with photocatalysis's high reactivity, providing a promising solution for solar energy use.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Heterogeneous Catalysis by Fullerene C 60 : Photocatalytic Dehydro‐Dimerization of Primary Amines and Tetrahydroquinolines Studied Using Thread Spray Mass Spectrometry

Abstract Removal of a catalyst after a catalytic process is a time‐consuming and challenging process. In this paper, a fullerene catalyst coated on cellulose thread is developed and applied it in a heterogeneous photoreaction screening via a thread spray mass spectrometry (MS) platform. The surface of the cellulose thread is modified with NH 2 groups, which subsequently allows immobilization of fullerene C 60 on the thread. The final fullerene functionalized thread is placed in a glass capillary and the solution of the reactant to be interrogated is added. The assembly of thread and glass capillary is placed in front of a mass spectrometer, which serves as an online photoreaction platform after a light source and direct current high voltage are applied. As an ambient ionization approach, the photocatalytic reaction screening platform enabled real‐time MS characterization of products and intermediates and using only nanomole quantities of reactants. Fullerene C 60 is identified to facilitate dehydro‐dimerization reactions from amines. Norharmane shows a unique photo‐oxygenated dimer formation. The functionalized threads immobilized with fullerene C 60 are reusable, confirming the heterogeneous nature of the platform. Thus, this system provided real‐time screening of reactions catalyzed by fullerene C 60 and a means to investigate the reaction mechanism.

Chemistry↗
DOE OSTI2026

Temperature effects on cobalt hydroxide–cobalt carbonate competitive growth on carbonate surfaces

Cobalt (Co), a critical metal essential for various environmental and industrial processes, undergoes speciation and immobilization in natural systems, primarily interacting with existing mineral surfaces. Understanding the underlying mechanisms of Co immobilization on abundant carbonate surfaces under different environmental conditions is critical for predicting Co mobility, availability, and recovery. In this study, we investigated the temperature-dependent competition between CoCO 3 and Co(OH) 2 formation on calcite (CaCO 3 ) and magnesite (MgCO 3 ) surfaces. Using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS), we analyzed carbonate substrates exposed to CoCl 2 solutions at varying concentrations (0–500 μM) and temperatures (22, 50, and 80 °C). Magnesite surfaces promoted CoCO 3 formation due to its low lattice mismatch with sphaerocobaltite (CoCO 3 ). However, this slow-growing CoCO 3 component was progressively outcompeted by Co(OH) 2 formation as the temperature and/or initial Co concentration increased. On calcite surfaces, the poor lattice mismatch between calcite and sphaerocobaltite led to Co(OH) 2 outcompeting CoCO 3 formation at all three temperatures. These findings provide critical insights into the roles of substrate composition, solution chemistry, and temperature in controlling Co speciation and mobility. They carry important implications for environmental transport, geochemical cycling, and industrial recovery of cobalt in carbonate-rich systems.

Calcite↗
DOE OSTI2026

Microbial reduction of low-crystallinity tripuhyite (FeSbO 4 ): Implications for Sb(V) cycling in contaminated environments

Tripuhyite (FeSbO 4 ) is an important antimony (Sb)-bearing mineral that controls Sb mobility in contaminated environments, yet its structural stability during microbial reduction remains unresolved. Understanding how FeSbO 4 behaves under anoxic conditions is therefore necessary to predict natural Sb cycling. Here, this study examined how an anaerobic microbial community interacts with FeSbO 4 and alters its structural and redox behavior. Across all conditions, FeSbO 4 released measurable Sb(V), demonstrating that the mineral undergoes partial dissolution in anoxic environment even without microbial activity. However, when extensive microbial Fe(III) reduction occurred in the presence of the electron shuttle anthraquinone-2,6-disulfonate (AQDS), the released Sb was re-immobilized. This indicates that microbial reduction processes modulate Sb mobility. Microbial community analysis showed the enrichment of acetate-utilizing Fe(III)-reducing bacteria as key drivers of Fe reduction. Although secondary Fe minerals were not detected, X-ray absorption fine structure measurements and scanning electron microscopy images revealed the formation of an Sb(III)-bearing phase consistent with valentinite (Sb 2 O 3 ) in the AQDS-amended treatment. This transformation suggests that AQDS not only enhances Fe(III) reduction but is also linked to Sb(V) reduction, and facilitates the immobilization of reduced Sb(III) as Sb 2 O 3 . Overall, this work provides the first evidence that FeSbO 4 is susceptible to microbially mediated redox transformations, and that these processes can significantly alter the mobility and speciation of Sb in reducing environments.

Electron transfer mediator↗
DOE OSTI2026

Impact of Rock Wettability and Mineralization on CO 2 Storage Efficiency in Basalt Reservoirs

Basalt formations have emerged as highly promising targets for geological CO 2 storage due to their abundance of reactive silicate minerals that can rapidly convert dissolved CO 2 into stable carbonate minerals. The efficiency of CO 2 trapping in basalts, however, depends not only on their geochemical reactivity but also on reservoir wettability, which governs how CO 2 partitions among structural, residual, solubility, and mineral trapping mechanisms. However, wettability and mineral kinetics have largely been examined separately, wettability for plume migration and kinetics in terms of mineralization, leaving their coupled impact unquantified. Here, we systematically integrate th ese processes in a reservoir-scale reactive transport model to quantify the impact of three distinct wettability conditions (water-wet, mixed-wet, and CO 2 -wet) on plume migration, mineral precipitation, pore-scale blockage, and long-term immobilization. Results show that under ideal conditions (no mineralization), water-wet systems exhibited plume aspect ratios up to 28% higher than CO 2 -wet systems and promoted at least 60% greater residual trapping. When mineralization was incorporated, mineral trapping accounted for 57%, 53%, and 46% of the total immobilized CO 2 in water-wet, mixed-wet, and CO 2 -wet systems, respectively. Dissolved CO 2 contributed 43-46%, while residual trapping remained below 5%, and mobile CO 2 was substantially reduced due to mineralization, demonstrating that as the system becomes more water-wet, CO 2 is more effectively converted into stable carbonate minerals, although extensive mineral precipitation may lead to pore clogging. A global Sobol-Morris sensitivity analysis further reveals that the kinetic parameters of reactive minerals are the most influential factor, followed by wettability, while salinity has only a minor influence. Furthermore, these findings highlight that wettability is not merely a flow property but a fundamental control on CO 2 mineralization in basalts, with direct implications for site selection for storage projects.

Basalts↗
DOE OSTI2025

Carbon Mineralization of Sulfate Wastes Containing Pb: Synchrotron Pb M3-Edge XANES Analysis of Simultaneous Heavy Metal and Carbon Sequestration

Sulfate wastes are produced in large quantities and contain toxic heavy metals such as lead (Pb), posing environmental risks. Because of favorable solubility differences, these wastes can be repurposed for engineered carbon dioxide (CO 2 ) sequestration. Understanding the fate and mobility of heavy metals during this process is important. This study focuses on Pb and the effect of zinc (Zn) on Pb in carbon mineralization. Synthesized gypsum was treated with a carbonate-rich solution at pH 11.5 to convert the sulfates to carbonates. Aqueous solutions and mineral solids were analyzed. Synchrotron-based micro-X-ray fluorescence and a novel application of Pb M3-edge X-ray absorption near-edge structure provided detailed insights into Pb distribution and mineral forms. Results showed significant reductions in aqueous Pb and Zn concentrations, indicating effective metal sequestration. Carbon mineralization transformed Pb from soluble anglesite (PbSO 4 ) into insoluble cerussite (PbCO 3 ) and hydrocerussite (Pb 3 (CO 3 ) 2 (OH) 2 ). Pb primarily precipitated onto calcium carbonate surfaces through surface-mediated precipitation reactions. While the presence of Zn modified crystallization dynamics, it did not impede Pb sequestration and potentially enhanced surface reactivity, facilitating greater Pb immobilization. These findings highlight carbon mineralization as a sustainable approach to immobilize toxic metals in sulfate wastes while advancing CO 2 sequestration efforts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Extension of Solvent-Assisted Linker Exchange to Supported Metal–Organic Framework Thin Films

Solvent-assisted linker exchange (SALE) is a common postsynthetic approach used to accommodate metal–organic frameworks (MOFs) for targeted applications. As this technique is relatively untested in immobilized MOF structures, we repeated the generalized SALE approach with ZIF-8 deposited directly onto solid substrates and assessed the results with a variety of techniques, including time-of-flight secondary-ion mass spectrometry (ToF-SIMS). Our methods confirm that the supported films maintain their key structural properties while allowing for linker substitution with foreign species. Alongside experiments, we used computational modeling to quantify the relative energetics of SALE reactions with a variety of linkers. These techniques together reveal that SALE is translatable to immobilized MOFs. Additionally, we recognize how various aspects of the postsynthetic approach can bear consequences for the material’s final micro- and macroscopic properties. Furthermore, the results uncover basic yet critical details needed to inform future efforts to engineer MOF films with functional properties.

Ligands↗
DOE OSTI2024

Beyond Ion Migration in Metal Halide Perovskites: Toward a Broader Photoelectrochemistry Perspective

Ion migration is a broad term used to account for the degradation of halide perovskite materials and devices. However, ion mobility is only one piece of the full picture-mobile ions/defects are first created, then transported, and eventually annihilated or immobilized. In this Perspective, we summarize emerging work that shows how tractable photochemical and Faradaic reactions provide a continuous source of ions to migrate. Furthermore, we discuss strategies to fundamentally manipulate ion migration by targeting specific electrochemical and reduction/oxidation mechanisms. This highlights the important role of defect photoelectrochemistry, as well as the soft nature of the perovskite lattice, in ion migration and self-healing. We conclude that distinguishing more detailed processes involved in “ion migration”, with an emerging focus on the reactions that form mobile ionic defects, is necessary to greatly improve the stability of devices and open up more technological applications.

defects↗
DOE OSTI2024

Enhanced Stability and Sensitivity for CA-125 Detection Under Microfluidic Shear Flow Using Polyethylene Glycol-Coated Biosensor

The microfluidic-based point-of-care (POC) diagnostic tool has garnered significant interest in recent years, offering rapid and cost-effective disease detection. There is a growing trend toward integrating microfluidic platforms with biosensors, aligning lab-on-a-chip technologies with POC diagnostic devices. Despite numerous efforts to incorporate biosensors into microfluidic systems, researchers have performed very limited investigations on the stability of biomarker detection when biosensors operate under microfluidic shear flow conditions. Gold nanoparticles (AuNPs) are a widely employed material in capacitive biosensors for antibody immobilization and sensitivity enhancement. However, AuNPs have limitations in providing stable detection of biomarkers within microfluidic shear flow due to their agglomeration nature. This study addresses these limitations by employing 2 kDa polyethylene glycol (PEG) as an intermediate biofunctional layer to immobilize CA-125 antibodies on gold-interdigitated electrodes for the stable and accurate detection of CA-125 antigens. The stabilities and sensitivities of AuNPs and PEG-coated biosensors are evaluated under both static drop and microfluidic shear flow conditions for CA-125 antigen detection. The experimental results demonstrate a capacitive signal response (5660 pF at 10 kHz) 2.2 times higher using the PEG-coated biosensor than the signal (2551 pF at 10 kHz) measured by the AuNP-coated biosensor in the detection of CA-125 antigen–antibody conjugation under static drop conditions, indicating the higher sensitivity of the PEG-coated biosensor. Additionally, the PEG-coated biosensor exhibits better consistency for the CA-125 antigen detection between static drop and microfluidic shear flow conditions (Cp decrease in percentage (ΔCp%↓) = 2.9% at 10 kHz) compared to the electrical signals measured using the AuNP-coated biosensor (ΔCp%↓ = 32.4% at 10 kHz), which suggests that the PEG-coated biosensor demonstrates higher stability for CA-125 antigen detection under microfluidic shear flow conditions. With these significant improvements brought by the PEG-coated biosensor, especially under microfluidic conditions, a substantial hurdle in developing electrical biosensors for POC diagnostic applications has been overcome, expediting further advancements in the field.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Urea-to-Ammonia Conversion at Proteus mirabilis Modified Pt–Ni/BDD Electrodes

Efficient wastewater recycling technologies are essential for long-duration space missions and sustainable water management on Earth. Here, a bioelectrochemical system integrating Proteus mirabilis with a platinum–nickel-modified boron-doped diamond electrode (Pt–Ni/BDDE) for urea-to-ammonia conversion in synthetic urine is presented. Immobilized P. mirabilis catalyzes enzymatic ureolysis, converting urea into ammonia, which is subsequently oxidized electrochemically, and no direct electrochemical urea oxidation is observed. Cyclic voltammetry (CV) of P. mirabilis on Pt–Ni/BDDE in 0.1 M urea and synthetic urine revealed a broad anodic oxidation peak at approximately 0.55–0.75 V vs Ag/AgCl (sat. KCl), corresponding to ammonia oxidation. Control experiments using bare BDDE and Pt–Ni/BDDE in synthetic urine showed no oxidation peak, establishing that the bioelectrocatalytic response originates exclusively from the bioelectrode interface. Chronoamperometry studies revealed that immobilization potential and time critically influenced bacterial adhesion and electrochemical response, with optimal conditions yielding a maximum current density of 0.0055 mA·cm –2 . These quantitative results establish that microbial ureolysis can be efficiently coupled with advanced electrode materials for urea-to-ammonia conversion, offering a promising self-sustaining strategy for urine processing and water recovery in closed-loop life support systems.

Ammonia↗
DOE OSTI2025

Synergy in Materials: Leveraging Phosphosilicate Waste Forms for Electrochemical Salt Waste

Here, waste forms containing glassy and crystalline phosphate and silicate phases were produced to immobilize salt waste simulants from pyroprocessing and characterized by using Raman spectroscopy, Mössbauer spectroscopy, X-ray diffraction, scanning electron microscopy, heat capacity, and chemical durability measurements. In this work, a phosphosilicate waste form is presented to leverage the benefits of both borosilicate glasses and iron phosphate glasses. To improve waste loading, prior to immobilization, salt simulants were successfully dechlorinated using ammonium dihydrogen phosphate, mixed with a borosilicate frit (5–30 wt %) and Fe 2 O 3 , and vitrified. Additions of 2.5–15 wt % borosilicate glass (NBS3) improved normalized release rates for Cs relative to iron-phosphates without NBS3, resulting in chemical durabilities similar to high-level waste borosilicate glass reference materials. The release rates of the alkalis (i.e., Li, Na, K, Cs) were the lowest with the addition of 5 wt % NBS3. Although Sr was not specifically targeted in this study, evidence exists that it preferentially partitioned with Si to form an amorphous droplet phase within the iron phosphate glass matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Programmed synthesis of mesoporous protein crystals in cellular reactors

Protein crystals are naturally derived mesoporous materials with versatile structures and physicochemical properties. Here we introduce an intracellular synthesis platform that enables controllable and programmable protein crystallization. In live cells, we show that, after initial nucleation, steady protein expression governs crystal growth, yielding predictable, tunable dynamics in live cells. Exploiting this feature, we combined HaloTag and click chemistries to achieve modular, programmable immobilization of diverse guest materials with spatial patterning down to ~100 nm resolution. We further demonstrated the sequential release of immobilized materials in physiologically relevant fluids. As a proof of concept, we programmed particles to carry human fibroblast growth factors in distinct layers, which elicited designed oscillatory Akt signalling patterns in cell culture. Finally, this work outlines a programmable method for producing mesoporous materials, with possible applications in catalysis and biomedicine.

Yang, Hongru [Johns Hopkins Univ., Baltimore, MD (↗
DOE OSTI2025

Multiscale Explanation of the Missing Gallium Vacancy in Gallium Arsenide

Irradiation of gallium arsenide (GaAs) produces immobile vacancies and mobile interstitials. Yet, after decades of experimental investigation, the immobile Ga vacancy continues to evade detection, raising the question: where is the Ga vacancy? Static first-principles calculations predict a Ga vacancy should be readily observed. We find that short-time dynamical evolution of primary defects is the key to explaining this conundrum. Using a dynamical multiscale atomistically informed device engineering (AIDE) method, we discover that during the initial displacement damage, the Ga vacancy (3-/2-) defect level pins the Fermi level near the midgap, producing oppositely charged vacancies and interstitials. Driven by Coulomb attraction, fast As interstitials preferentially annihilate Ga vacancies. The Ga vacancy population plummets below detectable limits—and the now unpinned Fermi level recovers—before being experimentally observed. This dynamical model solves the mystery of the missing Ga vacancy and reveals the importance of a multiscale approach to explore the dynamical chemical behavior in experimentally inaccessible short-time regimes.

Diaz, Leopoldo [Sandia National Laboratories (SNL-↗
DOE OSTI2024

Full Scale HEPA Filter Encapsulation in Ultra-High-Performance Grout - Proof of Concept

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) currently being constructed to treat radioactive waste, includes vitrification facilities for both the high-level waste (HLW) and low activity waste (LAW) fractions. Operation of the WTP will produce contaminated high-efficiency particulate air filters (HEPA), as part of the solid secondary waste (SSW) stream. The HEPA filters receive off-gas from the vessel vent header and primary off-gas treatment system in LAW Facility and remove particulate contaminants including 99 Tc and 129 I salts. The current disposal method for HEPA filters is encapsulation in metal containers using cementitious material (CM) and disposal in the Integrated Disposal Facility (IDF). Results from the 2017 IDF Performance Assessment (PA) WRPS (2018) demonstrated that while compliance is maintained for the 1000 year compliance period mandated by DOE O 435.1 and its accompanying manual, release of constituents from the HEPA filters result in exceedance of the performance objective imposed as the groundwater regulatory limit at later times. For example, at about 1500 years post-closure, solid secondary waste (SSW), including HEPA filters is predicted to become a dominant contributor to 99 Tc release and over the 10,000-year sensitivity analysis period, SSW is the dominant contributor of 129 I release to the groundwater. The estimated release could potentially be reduced if the HEPA filters are not compacted and waste containers could be distributed throughout a large space, thereby diluting the contaminant release. Additionally, a better cementitious material could be used to encapsulate the HEPA filters. One alternative method for disposal of contaminated HEPA filters is encapsulation of the filters in ultra high-performance grout (UHPG). UHPG is a variation of ultra-high-performance concrete (UHPC) is commonly used in the prestressed concrete industry for large structural members. Recent studies of UHPG show it has excellent properties for containing radionuclides such as 99 Tc and 129 I Nichols and Kaplan (2021). This report presents the results of the first attempt to encapsulate a clean, full-size HEPA filter in UHPG and evaluate the effectiveness of the immobilization process and final waste form. A full-scale proof-of-concept simulated waste form was prepared by encapsulating a HEPA filter in a 110-gallon stainless steel (SS) drum using UHPG. A change from Type I/II PC to Type 1L PLC was made after American Rock Products informed the team that they would no longer be using Type I/II by the end of 2024 and the northwest was phasing out Type I/II PC overall. Type I/II PC used in previous studies of UHPG for encapsulation (Nichols and Kaplan 2021). After the UHPG was cured both the scaled mockup and the full-scale simulated waste forms were sectioned for visual examination. UHPG completely encapsulated the filters and bonded to the external surfaces of materials comprising the filters. No cracks were observed in the sectioned waste forms.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗