Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INOCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Photothermal effects induced by laser heating of gold nanorods in suspensions and inoculated tumours during in vivo experiments

Photothermal effects are studied under laser irradiation of aqueous suspensions of gold nanorods (in vitro experiments) and mice-inoculated Erlich carcinoma after intravenous injection of gold nanorods with the size 40 Multiplication-Sign 10 nm and plasmon resonance at the wavelength 810 nm (in vivo experiment). In 24 hours after the injection the polyethylene-glycol-coated nanoparticles accumulated in the tumour with the concentration three - four times greater than in healthy muscle tissue. At concentrations, attained as a result of passive accumulation of nanoparticles in the tumour (4 {mu}g per 1 g of tumour), the efficiency of the tumour heating was higher than that in aqueous solutions having the same concentration of nanoparticles. Various mechanisms of this effect are discussed including the difference in thermal physical parameters of water and biotissue, the aggregation of nanoparticles in tissues, the influence of multiple scattering in biotissue, and the nonuniform accumulation of particles in the tumour. Using the Monte Carlo method for simulating multiple scattering of light, it is shown that there are such proportions between the biotissue scattering coefficient and the absorption coefficient of nanoparticles, at which the fraction of absorbed photons in the tissue is higher than that in a transparent medium containing the same nanoparticles. The conclusion is made that the regime of hyperthermia is less efficient for antineoplastic therapy than the thermal damage due to fast short-time heating of the tissues up to the destruction temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microscopic, Biochemical, and Molecular Comparisons of Moderately Resistant and Susceptible Populus Genotypes Inoculated with Sphaerulina musiva

Sphaerulina musiva, the causal agent of Septoria leaf spot and stem canker, is responsible for mortality and yield loss in Populus plantations. However, little is known about the mode of infection and the mechanisms of resistance in this pathosystem. To characterize these phenomena, microscopic, biochemical, and transcriptome comparisons were performed between leaves of moderately resistant and susceptible genotypes of Populus inoculated with S. musiva conidia. Using scanning electron, cryofracture, and laser-scanning confocal microscopy, the infection and colonization of Populus leaves by S. musiva were examined across five time points (48 h, 96 h, 1 week, 2 weeks, and 3 weeks). The infection process was similar regardless of the host genotype. Differences in host colonization between susceptible and moderately resistant genotypes were apparent by 1 week postinoculation. However, the germination of conidia was greater on the susceptible than on the moderately resistant genotype (P < 0.008). Diaminobenzidine staining, a measure of hydrogen peroxide accumulation, was different (P < 0.001) between the host genotypes by 2 weeks postinoculation. Transcriptome differences between genotypes indicated that the speed and amplitude of the defense response were faster and more extensive in the moderately resistant genotype. Changes in gene expression support the microscopic and biochemical observations.

Plant Sciences↗

Grain refinement of cast zinc through magnesium inoculation: Characterisation and mechanism

It was previously found that peritectic-forming solutes are more favourable for the grain refinement of cast Al alloys than eutectic-forming solutes. In this work, we report that the eutectic-forming solute, Mg, can also significantly grain refine cast Zn. Differential thermal analysis (DTA) of a Zn–Mg alloy, in which efficient grain refinement occurred, evidenced an unexpected peak that appeared before the nucleation of η-Zn grains on the DTA spectrum. Based on extensive examination using X-ray diffraction, high resolution SEM and EDS, it was found that: (a) some faceted Zn–Mg intermetallic particles were reproducibly observed; (b) the particles were located at or near grain centres; (c) the atomic ratio of Mg to Zn in the intermetallic compound was determined to be around 1/2. Using tilting selected area diffraction (SAD) and convergent beam Kikuchi line diffraction pattern (CBKLDP) techniques, these faceted particles were identified as MgZn{sub 2} and an orientation relationship between such grain-centred MgZn{sub 2} particles and the η-Zn matrix was determined. Hence, the unexpected peak on the DTA spectrum is believed to correspond to the formation of MgZn{sub 2} particles, which act as effective heterogeneous nucleation sites in the alloy. Together with the effect of Mg solute on restricting grain growth, such heterogeneous nucleation is cooperatively responsible for the grain size reduction in Zn–Mg alloys. - Highlights: • A new eutectic-based grain refiner for the cast Zn was found. • The formation process of an intermetallic compound (MgZn{sub 2}) was characterised. • MgZn{sub 2} can act as potent heterogeneous nucleation sites above the liquidus. • A new OR between MgZn{sub 2} and η-Zn was determined using the CBKLDP technique.

36 MATERIALS SCIENCE↗

3B11-N, a monoclonal antibody against MERS-CoV, reduces lung pathology in rhesus monkeys following intratracheal inoculation of MERS-CoV Jordan-n3/2012

Middle East Respiratory Syndrome Coronavirus (MERS-CoV) was identified in 2012 as the causative agent of a severe, lethal respiratory disease occurring across several countries in the Middle East. To date there have been over 1600 laboratory confirmed cases of MERS-CoV in 26 countries with a case fatality rate of 36%. Given the endemic region, it is possible that MERS-CoV could spread during the annual Hajj pilgrimage, necessitating countermeasure development. In this report, we describe the clinical and radiographic changes of rhesus monkeys following infection with 5×10{sup 6} PFU MERS-CoV Jordan-n3/2012. Two groups of NHPs were treated with either a human anti-MERS monoclonal antibody 3B11-N or E410-N, an anti-HIV antibody. MERS-CoV Jordan-n3/2012 infection resulted in quantifiable changes by computed tomography, but limited other clinical signs of disease. 3B11-N treated subjects developed significantly reduced lung pathology when compared to infected, untreated subjects, indicating that this antibody may be a suitable MERS-CoV treatment. - Highlights: • MERS-CoV Jordan-n3/2012 challenge of rhesus monkeys results in a mild disease. • CT can be used to monitor disease progression to aid models of human disease. • Treatment with the human monoclonal antibody 3B11-N resulted in decreased disease.

60 APPLIED LIFE SCIENCES↗

Influence of Alloy and Solidification Parameters on Grain Refinement in Aluminum Weld Metal due to Inoculation

The goals are: (1) Establish how much Ti/B grain refiner is need to completely refine aluminum weld metal for different alloys and different welding conditions; (2) Characterize how alloy composition and solidification parameters affect weld metal grain refinement; and (3) Apply relevant theory to understand observed behavior. Conclusions are: (1) additions of Ti/B grain refiner to weld metal in Alloys 1050, 5083, and 6082 resulted in significant grain refinement; (2) grain refinement was more effective in GTAW than LBW, resulting in finer grains at lower Ti content - reason is limited time available for equiaxed grain growth in LBW (inability to occlude columnar grain growth); (3) welding travel speed did not markedly affect grain size within GTAW and LBW clusters; and (4) application of Hunt CET analysis showed experimental G to be on the order of the critical G{sub CET}; G{sub CET} was consistently higher for GTAW than for LBW.

36 MATERIALS SCIENCE↗

Synergistic degradation performance of UV / TiO 2 photocatalysis and biotrickling filtration inoculated with Aspergillus sp. S1 for gaseous m ‐xylene

Abstract Background Biotricking filtration (BTF) based on absorption and biodegradation of waste gas by microorganisms in a biofilm can be used to degrade with difficulty hydrophobic volatile pollutants. Photocatalysis is a promising technology for the abatement of gaseous contaminants because of its nonselective oxidation of volatile organic compounds; however, photocatalysis technology has the limitations of high energy consumption and low mineralization efficiency. This study, therefore, aimed to investigate the synergistic effects of UV/TiO 2 photocatalysis (PCO) pretreatment and BTF in treating gaseous m ‐xylene. Results BTF incubated with a mold, Aspergillus sp. S1, was acclimated with m ‐xylene as the sole carbon source. A combined system of PCO with BTF was developed to remove gaseous m ‐xylene. The results showed that the startup period was shortened by 3 days in the PCO‐BTF combined system compared to that with BTF alone. The removal efficiency reached 73% and 91% for the BTF and PCO‐BTF systems respectively when the empty bed residence time was extended to 90 s. In addition, PCO‐BTF could withstand transient shock loading of m ‐xylene of 5000 mg m −3 and gradually restore its decontamination performance. Conclusions PCO pretreatment was effective in the enhancement of the removal capacity of BTF for m ‐xylene. The PCO‐BTF system proposed in this study provides an attractive alternative to abate hydrophobic volatile pollutants. The integration of PCO essentially prompted the capability of Aspergillus sp. S1 in the BTF unit, which paves the way for the treatment of gaseous waste at an industrial scale. © 2022 Society of Chemical Industry (SCI).

Du, Qingping↗