Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM IONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Comparison of the atomic structure of InP amorphized by electronic or nuclear ion energy-loss processes

InP was amorphized by ion irradiation in two very different regimes: (i) 185 MeV Au irradiation, where the energy loss was predominantly via inelastic processes (electronic stopping), or (ii) Se irradiation in an energy range of 0.08-7 MeV, where elastic processes (nuclear stopping) were dominant. The structural parameters of the amorphous phase were determined for as-irradiated and thermally relaxed samples using extended x-ray absorption fine structure spectroscopy. Despite the fundamentally different energy transfer mechanisms, no significant difference in the atomic structure of the two amorphized samples was observed. We attribute this result to a common ''melt and quench'' process responsible for amorphization. In fact, the measured structural parameters for the amorphized samples, including the fraction of homopolar In-In bonding, were consistent with simulations of the amorphous phase produced by assuming a quench from the melt.

36 MATERIALS SCIENCE↗

Defect redistribution in postirradiation rapid-thermal-annealed InN

We have applied positron annihilation to study point defects in 2 MeV {sup 4}He{sup +}-irradiated and subsequently rapid-thermal-annealed (RTA) InN grown by molecular-beam epitaxy. The irradiation fluences ranged from 5x10{sup 14} to 2x10{sup 16} cm{sup -2}. The irradiation primarily produces donor defects but the subjects of this work are the acceptor-type defects produced in lower concentrations: V{sub In}, in addition to negative-ion-type defects. The heat treatment results in a redistribution of the irradiation-induced point defects. The In vacancies near the film-substrate interface appear restructured after the RTA process, possibly influenced by growth defects near the interface, while deeper in the InN layer, the defects produced in the irradiation are partially removed in the annealing. This could be responsible for the improved transport properties of the annealed films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of indium phosphite and selected compounds under irradiation with swift heavy ions

Surface and bulk properties of indium phosphate single crystals with initial and previously irradiated by 25 MeV electrons structures were irradiated with {sup 86}Kr (253 MeV) and {sup 197}Au (200 MeV) up to various fluences. The modern methods of condensed matter studies were used for research of InP property changes before and after irradiation as scanning (SEM) and high resolution transmission electronic microscopy (HTEM), Rutherford backscattering spectroscopy (RBS/C) and atomic force microscopy (AFM). The comparison of obtained results with the results of other authors is carried out. The surface structure change of InP single crystal irradiated by high-energy 86Kr ions and electrons is studied. It is shown the changes of the InP surface have complicated character and caused by inelastic sputtering processes. It is observed the twice irradiated layer swells with the cracks creation on the surface. The swelling with cracks and strong sputtering of twice irradiated by electrons and ions with high energy layers of the InP and GaAs surfaces are explained using the model based on the influence of ionizing energy loss of swift {sup 86}Kr ions. The small crystalline objects are detected on the InP surface irradiated with {sup 86}Kr ions which may be nano- and micro-crystals of InP. All obtained effects are discussed in frame of models based on ionizing energy loss of swift heavy ions.

36 MATERIALS SCIENCE↗

Sensitivity of CoSi{sub 2} precipitation in silicon to extra-low dopant concentrations. II. First-principles calculations

The paper is the second part of the study on the influence of very low dopant content in silicon on CoSi{sub 2} precipitation during high-temperature cobalt ion implantation into transmission electron microscope samples. It deals with the computational justification of various assumptions used in Paper I when rationalizing the kinetics of cobalt clustering in ion-implanted intrinsic silicon (both undoped and containing low concentrations of phosphorus atoms). In particular, it is proven that divacancies are efficient nucleation centers for the new Co-Si phase. It is shown that the capture of vacancies and divacancies on phosphorus atoms increases their lifetime in silicon matrix, but practically does not affect the mechanism of their interaction with interstitial cobalt atoms. Finally, it is demonstrated that the mobility of phosphorus interstitials at temperatures of our experiment is orders of magnitude higher than might be expected from the published literature data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and optical properties of [In{sub 1−2x}Sn{sub x}Zn{sub x}]GaO{sub 3}(ZnO){sub m}

Compounds of [In{sub 1−2x}Sn{sub x}Zn{sub x}]GaO{sub 3}(ZnO){sub 1} (x≤0.22) and [In{sub 1−2x}Sn{sub x}Zn{sub x}]GaO{sub 3}(ZnO){sub 2} (x≤0.42) were prepared by solid state processing proving a substantial solid solution of Sn in the layered compounds InGaO{sub 3}(ZnO){sub m} (m=1, 2). Single crystal X-ray diffraction of the compounds reveals two In{sup 3+} ions to be substituted by one Sn{sup 4+} and one Zn{sup 2+} at the octahedral layer preserving the average charge of +3 at these sites. The substitution does not lead to an ordering of the ions but proves for the first time that the octahedral site can be occupied by different ions while all characteristics of the layered structures remain unchanged. Consequences of indium substitution are (i) decrease of the a axis compared to InGaO{sub 3}(ZnO){sub m} according to smaller ionic radii of Sn{sup 4+} and Zn{sup 2+} compared to In{sup 3+} and (ii) shift of the optical band gap to higher energies shown by UV–vis measurements. - Graphical abstract: Substitution limits of indium in InGaO{sub 3}(ZnO){sub m} (IGZO) by Sn and Zn are studied for m=1, 2 by single crystal X-ray diffraction and micro-chemical analysis. - Highlights: • New Oxides [In{sub 1−2x}Sn{sub x}Zn{sub x}]GaO{sub 3}(ZnO){sub m} (m=1, 2) with IGZO type structure. • Sn and Zn substitute for In at octahedral sites. • Crystal structures were characterized by single crystal X-ray diffraction. • Optical band gap energies were determined by UV–vis spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanocrystalline CuInSSe thin films by chemical bath deposition technique

Crystalline CuInSSe thin films have been deposited on glass substrate by chemical bath deposition technique. The CuCl{sub 2}, InCl{sub 3}, thiourea and SeO{sub 2} were used as source materials for the Cu{sup 2+}, In{sup 3+}, S{sup 2−} and Se{sup 2−} ions and the Cu/In ratio was kept at 1.0. EDC was used as a complexing agent. The XRD, Scanning Electron Microscope (SEM), Energy Dispersive Analysis of X-Ray (EDAX) and Optical transmission studies were used for structural analysis, surface morphology, elemental analysis and optical band gap, of the grown thin films respectively. The deposition parameters such as pH, deposition temperature and deposition time were optimized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion-energy distributions at a substrate in reactive magnetron sputtering discharges in Ar/H{sub 2}S from copper, indium, and tungsten targets

Ion-energy distributions from copper, indium, and tungsten targets were measured during reactive sputtering in argon-hydrogen sulfide (H{sub 2}S) mixtures, since reactive magnetron sputtering of sulfides from metallic targets is of increasing interest, especially for photovoltaic applications (buffer and absorber layers, i.e., CuInS{sub 2}, In{sub 2}S{sub 3}, or WS{sub 2}). The mass spectra of the ions show a wide range of molecules H{sub x}S{sub n} derived from H{sub 2}S by plasma-assisted attachment both for positive (n{<=}9) and for negative (n{<=}6) ions. From the copper and the indium targets metallic ions (Cu{sup +}, In{sup +}) could be detected. While tungsten and indium sulfur compounds were found, copper does not form compounds with sulfur, caused by its lower chemical reactivity. Positive (Ar{sup +}, S{sup +}, W{sup +}, Cu{sup +}, In{sup +}, etc.) as well as negative ions (S{sup -}, InS{sup -}, WS{sub 3}{sup -}) were measured for dc and rf (27 MHz) plasma excitations. The positive ions originate mainly from the plasma in front of the substrate and exhibit energies of about 12 eV for the dc and 18 eV for the rf discharge for the substrate at floating potential. The energy difference is caused by the higher electron temperature in the rf compared to the dc discharge. The ion-energy distributions of negative ions exhibit two distinct peaks. The high-energetic peak can be attributed to ions accelerated in the cathode dark space to a high energy (up to more than 400 eV) corresponding to the cathode (target) voltage. The second peak has its maximum at zero energy decreasing steeply up to energies of about 100 eV. These ions are generated by charge-exchange collisions of energetic species from the target (reflected neutral argon, negative sulfur ions, etc.) on their passage from the target to the substrate caused by the high charge-exchange cross section. rf magnetron sputtering leads to significantly lower energies of negative ions from the target, caused by the lower discharge voltages, which could be advantageous for the deposition of active semiconducting sulfide films.

36 MATERIALS SCIENCE↗

Crystal structure and magnetic properties of Li,Cr-containing molybdates Li{sub 3}Cr(MoO{sub 4}){sub 3}, LiCr(MoO{sub 4}){sub 2} and Li{sub 1.8}Cr{sub 1.2}(MoO{sub 4}){sub 3}

Single crystals of LiCr(MoO{sub 4}){sub 2}, Li{sub 3}Cr(MoO{sub 4}){sub 3} and Li{sub 1.8}Cr{sub 1.2}(MoO{sub 4}){sub 3} were grown by a flux method during the phase study of the Li{sub 2}MoO{sub 4}-Cr{sub 2}(MoO{sub 4}){sub 3} system at 1023 K. LiCr(MoO{sub 4}){sub 2} and Li{sub 3}Cr(MoO{sub 4}){sub 3} single phases were synthesized by solid-state reactions. Li{sub 3}Cr(MoO{sub 4}){sub 3} adopts the same structure type as Li{sub 3}In(MoO{sub 4}){sub 3} despite the difference in ionic radii of Cr{sup 3+} and In{sup 3+} for octahedral coordination. Li{sub 3}Cr(MoO{sub 4}){sub 3} is paramagnetic down to 7 K and shows a weak ferromagnetic component below this temperature. LiCr(MoO{sub 4}){sub 2} is isostructural with LiAl(MoO{sub 4}){sub 2} and orders antiferromagnetically below 20 K. The magnetic structure of LiCr(MoO{sub 4}){sub 2} was determined from low-temperature neutron diffraction and is based on the propagation vektor k{sup -}>=(1/2 ,1/2 ,0). The ordered magnetic moments were refined to 2.3(1) mu{sub B} per Cr-ion with an easy axis close to the [1 1 1-bar] direction. A magnetic moment of 4.37(3) mu{sub B} per Cr-ion was calculated from the Curie constant for the paramagnetic region. The crystal structures of the hitherto unknown Li{sub 1.8}Cr{sub 1.2}(MoO{sub 4}){sub 3} and LiCr(MoO{sub 4}){sub 2} are compared and reveal a high degree of similarity: In both structures MoO{sub 4}-tetrahedra are isolated from each other and connected with CrO{sub 6} and LiO{sub 5} via corners. In both modifications there are Cr{sub 2}O{sub 10} fragments of edge-sharing CrO{sub 6}-octahedra. - Graphical abstract: Magnetic structure of LiCr(MoO{sub 4}){sub 2}. The orientation of the magnetic moments of Cr{sup 3+} are shown by arrows.

36 MATERIALS SCIENCE↗

Diacetyl and 2,3-pentanedione exposure of human cultured airway epithelial cells: Ion transport effects and metabolism of butter flavoring agents

Inhalation of butter flavoring by workers in the microwave popcorn industry may result in “popcorn workers' lung.” In previous in vivo studies rats exposed for 6 h to vapor from the flavoring agents, diacetyl and 2,3-pentanedione, acquired flavoring concentration-dependent damage of the upper airway epithelium and airway hyporeactivity to inhaled methacholine. Because ion transport is essential for lung fluid balance, we hypothesized that alterations in ion transport may be an early manifestation of butter flavoring-induced toxicity. We developed a system to expose cultured human bronchial/tracheal epithelial cells (NHBEs) to flavoring vapors. NHBEs were exposed for 6 h to diacetyl or 2,3-pentanedione vapors (25 or ≥ 60 ppm) and the effects on short circuit current and transepithelial resistance (R{sub t}) were measured. Immediately after exposure to 25 ppm both flavorings reduced Na{sup +} transport, without affecting Cl{sup −} transport or Na{sup +},K{sup +}-pump activity. R{sub t} was unaffected. Na{sup +} transport recovered 18 h after exposure. Concentrations (100–360 ppm) of diacetyl and 2,3-pentanedione reported earlier to give rise in vivo to epithelial damage, and 60 ppm, caused death of NHBEs 0 h post-exposure. Analysis of the basolateral medium indicated that NHBEs metabolize diacetyl and 2,3-pentanedione to acetoin and 2-hydroxy-3-pentanone, respectively. The results indicate that ion transport is inhibited transiently in airway epithelial cells by lower concentrations of the flavorings than those that result in morphological changes of the cells in vivo or in vitro. - Highlights: • Butter flavoring vapor effects on human cultured airway epithelium were studied. • Na transport was reduced by a 6-h exposure to 25 ppm diacetyl and 2,3-pentanedione. • Na transport recovered 18 h after exposure. • > 60 ppm transepithelial voltage and resistance were abolished; cells were damaged. • Cells metabolized diacetyl and 2,3-pentanedione into acetoin and 2-OH-3-pentanone.

2-3-PENTANEDIONE↗

Wall-loss distribution of charge breeding ions in an electron cyclotron resonance ion source

The ion loss distribution in an electron cyclotron resonance ion source (ECRIS) was investigated to understand the element dependence of the charge breeding efficiency in an electron cyclotron resonance (ECR) charge breeder. The radioactive {sup 111}In{sup 1+} and {sup 140}Xe{sup 1+} ions (typical nonvolatile and volatile elements, respectively) were injected into the ECR charge breeder at the Tokai Radioactive Ion Accelerator Complex to breed their charge states. Their respective residual activities on the sidewall of the cylindrical plasma chamber of the source were measured after charge breeding as functions of the azimuthal angle and longitudinal position and two-dimensional distributions of ions lost during charge breeding in the ECRIS were obtained. These distributions had different azimuthal symmetries. The origins of these different azimuthal symmetries are qualitatively discussed by analyzing the differences and similarities in the observed wall-loss patterns. The implications for improving the charge breeding efficiencies of nonvolatile elements in ECR charge breeders are described. The similarities represent universal ion loss characteristics in an ECR charge breeder, which are different from the loss patterns of electrons on the ECRIS wall.

43 PARTICLE ACCELERATORS↗

Dielectric behavior of Ar{sup +} implanted CR-39 polymer

The frequency dependent dielectric response of Ar{sup +} implanted CR-39 specimens has been studied. Samples were implanted with 130 keV Ar{sup +} ions to various doses ranging from 5x10{sup 14} to 1x10{sup 16} cm{sup -2}. The frequency response of dielectric constant (e) and dielectric loss has been studied both in the pristine and argon ion implanted samples of CR-39 polymer in the frequency range 10{sup 4} to 10{sup 8} Hz. Structural changes produced in CR-39 specimens due to implantation have been studied using Attenuated total reflectance (ATR) Fourier transform infrared spectroscopic technique. Results of dielectric analysis indicate the lowering in dielectric constant ({epsilon}') and similar behavior of dielectric loss with increase in ion fluence. An attempt has been made to correlate these changes produced in the dielectric properties of implanted specimens with the structural changes produced due to implantation.

36 MATERIALS SCIENCE↗

Precision Calculation of Blackbody Radiation Shifts for Optical Frequency Metrology

We show that three group IIIB divalent ions, B{sup +}, Al{sup +}, and In{sup +}, have anomalously small blackbody radiation (BBR) shifts of the ns{sup 2} {sup 1}S{sub 0}-nsnp {sup 3}P{sub 0}{sup o} clock transitions. The fractional BBR shifts for these ions are at least 10 times smaller than those of any other present or proposed optical frequency standards at the same temperature, and are less than 0.3% of the Sr clock shift. We have developed a hybrid configuration-interaction + coupled-cluster method that provides accurate treatment of correlation corrections in such ions and yields a rigorous upper bound on the uncertainty of the final results. We reduce the BBR contribution to the fractional frequency uncertainty of the Al{sup +} clock to 4x10{sup -19} at T=300 K. We also reduce the uncertainties due to this effect at room temperature to 10{sup -18} level for B{sup +} and In{sup +} to facilitate further development of these systems for metrology and quantum sensing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion-implanted high microwave power indium phosphide transistors

Encapsulated rapid thermal annealing (RTA) has been used in the fabrication of InP power MISFETs with ion-implanted source, drain, and active-channel regions. The MISFETs had a gate length of 1.4 microns. Six to ten gate fingers per device, with individual gate finger widths of 100 or 125 microns, were used to make MISFETs with total gate widths of 0.75, 0.8, or 1 mm. The source and drain contact regions and the channel region of the MISFETs were fabricated using Si implants in InP at energies from 60 to 360 keV with doses of (1-560) x 10 to the 12th/sq cm. The implants were activated using RTA at 700 C for 30 sec in N2 or H2 ambients using an Si3N4 encapsulant. The high-power high-efficiency MISFETs were characterized at 9.7 GHz, and the output microwave power density for the RTA conditions used was as high as 2.4 W/mm. For a 1-W input at 9.7 GHz gains up to 3.7 dB were observed, with an associated power-added efficiency of 29 percent and output power density 70 percent greater than that of GaAs MESFETs.

Biedenbender, Michael D.↗

Highly efficient and selective adsorption of In{sup 3+} on pristine Zn/Al layered double hydroxide (Zn/Al-LDH) from aqueous solutions

A pristine Zn/Al-layered double hydroxide (Zn/Al-LDH) showed excellent adsorption ability and selectivity towards In{sup 3+} ions from aqueous solutions. The adsorption behaviour as a function of the contact time, solution pH, ionic strength, and amount of adsorbent under ambient conditions revealed a strong dependency on the pH and ionic strength over In{sup 3+} intake. The structure and properties of Zn/Al-LDH and In{sup 3+} adsorbed Zn/Al-LDH (In–Zn/Al-LDH) were examined carefully by X-ray diffraction, Fourier transform infrared spectroscopy, N{sub 2}-sorption/desorption, UV–vis spectroscopy, and X-ray photoelectron spectroscopy. The adsorbent had a sufficient number of active sites that were responsible for the In{sup 3+} adsorption and quite stable even after the adsorption process. The selective adsorption of In{sup 3+} on Zn/Al-LDH was also observed even from a mixture containing competing ions, such as Mn{sup 2+}, Co{sup 2+}, Ni{sup 2+}, Cd{sup 2+}, Pb{sup 2+}, and Cu{sup 2+}. The adsorption experiments showed that Zn/Al-LDH is a promising material for the pre-concentration and selective removal of In{sup 3+} from large volumes of aqueous solutions. - Highlights: • A pristine Zn/Al-layered double hydroxide showed good selectivity for In{sup 3+} ions. • The material exhibited a maximum In{sup 3+} intake of 205 mg g{sup −1} at pH 6. • The materials showed good affinity of In{sup 3+} over Cu{sup 2+} and Pb{sup 2+} from ion mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of new structurally related cyanamide compounds LiM(CN{sub 2}){sub 2} where M is Al{sup 3+}, In{sup 3+} or Yb{sup 3+}

Highlights: • New cyanamide compounds LiM(CN{sub 2}){sub 2} where M is Al{sup 3+}, In{sup 3+} or Yb{sup 3+}. • New luminescent material LiIn(CN{sub 2}){sub 2}:Tb{sup 3+}. • Reduction in efficiency of luminescence with temperature increase. - Abstract: New ternary cyanamide compounds isostructural to LiY(CN{sub 2}){sub 2} were obtained by solid state metathesis reaction. The crystal structure of LiAl(CN{sub 2}){sub 2} was determined by single crystal X-ray diffraction, the structures of LiIn(CN{sub 2}){sub 2} and LiYb(CN{sub 2}){sub 2} were solved from X-ray powder diffraction data. Photoluminescence properties of Tb{sup 3+}-doped LiIn(CN{sub 2}){sub 2} are reported too.

36 MATERIALS SCIENCE↗

Wall-loss distribution of charge breeding ions in an electron cyclotron resonance ion source

We investigated the ion-loss distribution on the sidewall of an electron cyclotron resonance (ECR) plasma chamber using the 18-GHz ECR charge breeder at the Tokai Radioactive Ion Accelerator Complex (TRIAC). Similarities and differences between the ion-loss distributions (longitudinal and azimuthal) of different ion species (i.e., radioactive {sup 111}In{sup 1+} and {sup 140}Xe{sup 1+} ions that are typical volatile and nonvolatile elements) was qualitatively discussed to understand the element dependence of the charge breeding efficiency. Especially, the similarities represent universal ion loss characteristics in an ECR charge breeder, which are different from the loss patterns of electrons on the ECRIS wall.

43 PARTICLE ACCELERATORS↗

Theoretical investigation of the effect of hydrogen addition on the formation and properties of soliton in direct current argon plasma

In this study the effect of hydrogen addition on the formation and properties of soliton in direct-current (DC) argon plasma is theoretically investigated. By coupling fluid equations with Poisons equation for such multi-component plasma, the Mach number and amplitude of the soliton are determined following pseudo potential method. Addition of hydrogen in argon discharge leads to the decrease of electron, Ar{sup +} ion density while a reverse trend was observed for ArH{sup +} and hydrogen like ions. It was found that presence of hydrogen like ions in argon plasma affects the formation of soliton with its amplitude significantly decreases as concentration of hydrogen increases. On the other hand, increase in ion to electron temperature ratios of the lighter ions in the discharge also has a significant influence on the amplitude and formation of soliton. The inverse relation between solitons width and amplitude is found to be consistent for the entire range of study.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In/ITO whisker and optoelectronic properties of ITO films deposited by ion beam sputtering

ITO films were deposited on a glass substrate using ion beam sputtering, with oxygen flow rates from 0.5 to 2 sccm. The films consisted of randomly oriented ITO nanoparticles and metallic indium (In) with {l_brace}101{r_brace} facets, following the specific crystallographic relationship of [010]{sub In}//[110]{sub ITO}; (001){sub In}//(001){sub ITO} with habit planes (100){sub In}//(011){sub ITO}, when fabricated using a low oxygen flow rate. Oxygen flow rate in excess of 2.0 sccm results in the growth of amorphous films. The epitaxial In nanoparticles probably act as seeds for the development of curved ITO whiskers as small as 10 nm and extend up to 100 nm in length along the [100] direction, with poorly defined shape, possibly due to the tapering and bending of the whisker to form a tilt boundary about the [011] zone axis of the ITO. The ITO whisker growth was facilitated by the In globular tips in the vapor-liquid-solid growth mechanism. The films prepared using a series of oxygen flow rates showed different chemical-bonding states, electric resistivity and optical transparency; as a result of phase and microstructural changes.

36 MATERIALS SCIENCE↗