Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Investigations of the polymer alignment, the nonradiative resonant energy transfer, and the photovoltaic response of poly(3-hexylthiophene)/TiO{sub 2} hybrid solar cells

We report the effects of annealing on the performance of hybrid photovoltaic (PV) cells containing poly(3-hexylthiophene) (P3HT) coated onto TiO{sub 2}/Sn doped In{sub 2}O{sub 3} (ITO) and ITO substrates. In the optimized device, which exhibits a higher efficiency, the backbone axes of the P3HT chains were found to lie within the substrate plane, their conjugated planes are slightly tilted, and their side chains are substantially tilted. The carboxylate group is attached via bidentate or bridging coordination to the TiO{sub 2} surface and enables photoinduced charge transfer between TiO{sub 2} and P3HT. The observed large quenching (with excitation at 488 nm) and enhanced emission (with excitation at 325 nm) indicates that efficient Foerster resonance energy transfer occurs between TiO{sub 2} and P3HT. Thus, the main influences on the high efficiency of the hybrid PV cells are the photon-mediated electronic transition and the photoinduced charge transfer.

36 MATERIALS SCIENCE↗

Room-temperature infrared photoluminescence from sputter-deposited InN films

Wurtzite InN films are deposited on Si(100) and glass substrates by reactive rf-magnetron sputtering at a substrate temperature of 300 deg. C. The InN films have high electron concentrations of n{approx}4x10{sup 20} cm{sup -3} at 300 K. The optical band-gap energy is determined to be {approx}1.4 eV at 300 K. This value is considerably smaller than the previously reported value of {approx}2 eV in sputter-deposited InN films. Strong infrared photoluminescence (PL) with a peak at {approx}1.3 eV is also observed at room temperature. Thermal annealing in dry N{sub 2} atmosphere at 600 deg. C changes the deposited film from wurtzite InN to a cubic In{sub 2}O{sub 3} that still exhibits PL emission but in the visible spectral region ({approx}2 eV).

36 MATERIALS SCIENCE↗

Capacitance-voltage characteristics of the electrolyte-n-InN surface and electron states at the interface

Dependences of differential capacitance of the system degenerate n-InN-electrolyte on the voltage are measured at a frequency of the probing voltage of 300 Hz. Qualitative analysis of these characteristics is performed based on a one-dimensional model of the metal-insulator-semiconductor structure in the region of bias voltages near the flat-band voltage and depletion. It is shown that the magnitude of capacitance in this voltage region is affected by electron states at the interface. The density and energy distribution of these states are evaluated. The form of the voltage dependence of capacitance in the region of accumulation also indicates the existence of the states at the interface, the energy of which exceeds the energy of the conduction band bottom by several tenths of eV. The density of these states increases as the energy increases.

36 MATERIALS SCIENCE↗

Dependence of selectivity on plasma conditions in selective etching in submicrometer pitch grating on InP surface by CH{sub 4}/H{sub 2} reactive ion etching

We studied selective etching and polymer deposition in submicrometer pitch gratings on the surface of InP using reactive ion etching with methane and hydrogen and investigated the plasma condition dependence of the selectivity. Using a mask structure consisting of regions with and without a thick layer on a grating-patterned thin layer, we achieved selective etching in submicrometer pitch gratings. In experiments conducted on the same surface at the same time, the InP is selectively etched in the window of the grating in the region with the thick layer, but it is not etched, and polymer is deposited, in the window of the grating in the region without the thick layer. We found that the selectivity depends on the plasma conditions, such as the hydrogen flow rate, pressure, and plasma power in reactive ion etching. This dependence might result from the variation in the ionic atoms of hydrogen or hydrocarbon/hydrogen, which are attracted to the charged mask and supplied to the window of the grating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Very low resistance alloyed Ni-based ohmic contacts to InP-capped and uncapped n{sup +}-In{sub 0.53} Ga{sub 0.47}As

Successful application of the silicide-like Ni{sub x}InGaAs phase for self-aligned source/drain contacts requires the formation of low-resistance ohmic contacts between the phase and underlying InGaAs. We report Ni-based contacts to InP-capped and uncapped n{sup +}- In{sub 0.53}Ga{sub 0.47}As (N{sub D} = 3 × 10{sup 19 }cm{sup −3}) with a specific contact resistance (ρ{sub c}) of 4.0 × 10{sup −8 }± 7 × 10{sup −9} Ω·cm{sup 2} and 4.6 × 10{sup −8 }± 9 × 10{sup −9} Ω·cm{sup 2}, respectively, after annealing at 350 °C for 60 s. With an ammonium sulfide pre-metallization surface treatment, ρ{sub c} is further reduced to 2.1 × 10{sup −8 }± 2 × 10{sup −9} Ω·cm{sup 2} and 1.8 × 10{sup −8 }± 1 × 10{sup −9} Ω·cm{sup 2} on epilayers with and without 10 nm InP caps, respectively. Transmission electron microscopy reveals that the ammonium sulfide surface treatment results in more complete elimination of the semiconductor's native oxide at the contact interface, which is responsible for a reduced contact resistance both before and after annealing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the Poisson ratio of (001) and (111) oriented thin films of In{sub 2}O{sub 3} by synchrotron-based x-ray diffraction

The Poisson ratio {nu} of In{sub 2}O{sub 3} has been determined by measurement of the covariation of in-plane and out-of-plane lattice parameters of strained thin films grown epitaxially on (111) and (001) oriented cubic Y-stabilized ZrO{sub 2} substrates. The experimental results are in good agreement with values for {nu} calculated using atomistic simulation procedures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of the toxicity of sintered and unsintered indium-tin oxide particles in murine macrophage and epidermal cells

Indium-tin oxide (ITO) is used to produce flat panel displays and several other technology products. Composed of 90% indium oxide (In{sub 2}O{sub 3}) and 10% tin oxide (SnO{sub 2}) by weight, ITO is synthesized under conditions of high heat via a process known as sintering. Indium lung disease, a recently recognized occupational illness, is characterized by pulmonary alveolar proteinosis, fibrosis, and emphysema. Murine macrophage (RAW 264.7) and epidermal (JB6) cells stably transfected with AP-1 to study tumor promoting potential, were used to differentiate between the toxicological profiles of sintered ITO (SITO) and unsintered mixture (UITO). We hypothesized that sintering would play a key role in free radical generation and cytotoxicity. Exposure of cells to both UITO and SITO caused a time and dose dependent decrease of the viability of cells. Intracellular ROS generation was inversely related to the dose of both UITO and SITO, a direct reflection of the decreased number of viable RAW 264.7 and JB6/AP-1 cells observed at higher concentrations. Electron spin resonance showed significantly increased hydroxyl radical (·OH) generation in cells exposed to UITO compared to SITO. This is different from LDH release, which showed that SITO caused significantly increased damage to the cell membrane compared to UITO. Lastly, the JB6/AP-1 cell line did not show activation of the AP-1 pathway. Our results highlight both the differences in the mechanisms of cytotoxicity and the consistent adverse effects associated with UITO and SITO exposure. - Highlights: • Sintered indium-tin oxide significantly impacts cellular viability and LDH release. • Unsintered indium-tin oxide impacts free radical production and DNA damage. • Indium compounds do not activate the AP-1 pathway.

60 APPLIED LIFE SCIENCES↗

Strain-balanced InGaN/GaN multiple quantum wells

InGaN/GaN multiple quantum well (MQW) structures suffer from a high amount of compressive strain in the InGaN wells and the accompanied piezoelectric field resulting in both a blue shift in emission and a reduction of emission intensity. We report the growth of In{sub x}Ga{sub 1−x}N/GaN “strain-balanced” multiple quantum wells (SBMQWs) grown on thick In{sub y}Ga{sub 1−y}N templates for x > y by metal organic chemical vapor deposition. SBMQWs consist of alternating layers of In{sub x}Ga{sub 1−x}N wells and GaN barriers under compressive and tensile stress, respectively, which have been lattice matched to a thick In{sub y}Ga{sub 1−y}N template. Growth of the In{sub y}Ga{sub 1−y}N template is also detailed in order to achieve thick, relaxed In{sub y}Ga{sub 1−y}N grown on GaN without the presence of V-grooves. When compared to conventional In{sub x}Ga{sub 1−x}N/GaN MQWs grown on GaN, the SBMQW structures exhibit longer wavelength emission and higher emission intensity for the same InN mole fraction due to a reduction in the well strain and piezoelectric field. By matching the average lattice constant of the MQW active region to the lattice constant of the In{sub y}Ga{sub 1−y}N template, essentially an infinite number of periods can be grown using the SBMQW growth method without relaxation-related effects. SBMQWs can be utilized to achieve longer wavelength emission in light emitting diodes without the use of excess indium and can be advantageous in addressing the “green gap.”.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly temperature insensitive quantum cascade lasers

An InP based quantum cascade laser (QCL) heterostructure emitting around 5 {mu}m is grown with gas-source molecular beam epitaxy. The QCL core design takes a shallow-well approach to maximize the characteristic temperatures, T{sub 0} and T{sub 1}, for operations above room temperature. A T{sub 0} value of 383 K and a T{sub 1} value of 645 K are obtained within a temperature range of 298-373 K. In room temperature continuous wave operation, this design gives a single facet output power of 3 W and a wall plug efficiency of 16% from a device with a cavity length of 5 mm and a ridge width of 8 {mu}m.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Halving the Casimir force with conductive oxides: Experimental details

This work is an extended version of a paper published previously [S. de Man et al., Phys. Rev. Lett. 103, 040402 (2009)], where we presented measurements of the Casimir force between a gold-coated sphere and a plate coated with either gold or an indium tin oxide (I TO) layer. The experiment, which was performed in air, showed that I TO conducts sufficiently to prevent charge accumulation but is still transparent enough to halve the Casimir attraction when compared to gold. Here we report all the experimental details that, owing to the limited space available, were omitted in the previous article. We discuss the performance of our setup in terms of stability of the calibration procedure and reproducibility of the Casimir force measurement. We also introduce and demonstrate a technique to obtain the spring constant of our force sensor. Furthermore, we present a thorough description of the experimental method, a comprehensive explanation of data elaboration and error analysis, and a complete characterization of the dielectric function and of the surface roughness of the samples used in the actual experiment.

74 ATOMIC AND MOLECULAR PHYSICS↗

Plasma-assisted molecular beam epitaxy of high quality In{sub 2}O{sub 3}(001) thin films on Y-stabilized ZrO{sub 2}(001) using In as an auto surfactant

The surface roughness of In{sub 2}O{sub 3}(001) films is a roadblock to potential semiconductor applications of this material. Using plasma-assisted molecular beam epitaxy we found that In{sub 2}O{sub 3}(001) films grow rough by the formation of (111) facets and In{sub 2}O{sub 3}(111) films grow smooth without facetting due to the conventionally used (oxygen-rich) conditions. This behavior indicates that the (111) surface is thermodynamically prefered over the (001) surface. We demonstrate that under indium-rich growth conditions these thermodynamics are changed allowing In{sub 2}O{sub 3}(001) films to grow smoothly without facetting. Surface indium plays a key role by acting as an auto surfactant that lowers the surface free energy difference between the (001) and the (111) surface.

36 MATERIALS SCIENCE↗

Hydrogen-doped In{sub 2}O{sub 3} transparent conducting oxide films prepared by solid-phase crystallization method

We have characterized amorphous to crystalline transformation of hydrogen (H)-doped In{sub 2}O{sub 3} (In{sub 2}O{sub 3}:H) films by transmission electron microscopy, thermal desorption spectroscopy, spectroscopic ellipsometry, and Hall measurements. The In{sub 2}O{sub 3}:H films that show a mixed-phase structure embedded with small density of crystalline grains in a large volume fraction of amorphous phase have been fabricated at room temperature by the sputtering of an In{sub 2}O{sub 3} ceramic target with introduction of H{sub 2}O vapor, and the films have been postannealed in vacuum to crystallize the amorphous phase. With increasing annealing temperature up to 200 deg. C, the film shows a large increase in Hall mobility ({mu}{sub Hall}) from 42 to 110 cm{sup 2}/V s and a decrease in carrier density (N{sub Hall}) from 4.6x10{sup 20} to 2.1x10{sup 20} cm{sup -3} with slight decrease in resistivity. The change in {mu}{sub Hall} and N{sub Hall} with annealing temperature is strongly correlated with the volume fractions of the amorphous and crystalline phases in the films. Analyses of dielectric functions of the films using the Drude model revealed that the high electron mobility in the crystallized films is attributed mainly to longer relaxation time rather than smaller effective mass, as compared with as-deposited films. Temperature-dependent Hall analysis, relationship between N{sub Hall} and {mu}{sub Hall}, and comparison between {mu}{sub Hall} and optical mobility showed that (i) scattering processes inside amorphous and/or crystalline matrices limit the mobility, (ii) doubly charged ionized impurity scattering is reduced by crystallization, and (iii) phonon scattering becomes dominant after crystallization in the In{sub 2}O{sub 3}:H films. The above results suggest that H-doping reduces carrier scattering in the crystallized In{sub 2}O{sub 3}:H and structural rearrangements during crystallization eliminate oxygen deficiency and generate H{sup +} that acts as a singly charged donor. In this article, we discuss the transport properties with the variation in microscopic and chemical structures in the In{sub 2}O{sub 3}:H films.

36 MATERIALS SCIENCE↗

Hydrogen in InN: A ubiquitous phenomenon in molecular beam epitaxy grown material

We study the unintentional H impurities in relation to the free electron properties of state-of-the-art InN films grown by molecular beam epitaxy (MBE). Enhanced concentrations of H are revealed in the near surface regions of the films, indicating postgrowth surface contamination by H. The near surface hydrogen could not be removed upon thermal annealing and may have significant implications for the surface and bulk free electron properties of InN. The bulk free electron concentrations were found to scale with the bulk H concentrations while no distinct correlation with dislocation density could be inferred, indicating a major role of hydrogen for the unintentional conductivity in MBE InN.

36 MATERIALS SCIENCE↗

Biomolecule-assisted synthesis and gas-sensing properties of porous nanosheet-based corundum In{sub 2}O{sub 3} microflowers

Porous nanosheet-based corundum In{sub 2}O{sub 3} microflowers were fabricated by one-pot hydrothermal treatment of D-fructose and In(NO{sub 3}){sub 3} mixture using urea as a precipitating agent followed by calcination. The products were characterized by X-ray diffraction, scanning and transmission electron microscopy. The effects of D-fructose and urea on the fabrication of nanosheet-based corundum In{sub 2}O{sub 3} microflowers were investigated and a possible mechanism is proposed to explain the formation of the hierarchical nanostructures. The gas sensor based on the In{sub 2}O{sub 3} microflowers exhibits excellent sensing properties for the detection of formaldehyde. - Graphical abstract: Nanosheets-based corundum In{sub 2}O{sub 3} microflowers were fabricated by one-pot hydrothermal treatment of D-fructose/In(NO{sub 3}){sub 3} mixture followed by calcination, which show high performance for formaldehyde sensing. Highlights: Black-Right-Pointing-Pointer Preparation of porous nanosheet-based corundum In{sub 2}O{sub 3} microflowers. Black-Right-Pointing-Pointer Morphology and phase control of In{sub 2}O{sub 3}. Black-Right-Pointing-Pointer Gas sensor based on the In{sub 2}O{sub 3} microflowers exhibits excellent sensing properties for the detection of formaldehyde.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiple growths of epitaxial lift-off solar cells from a single InP substrate

We demonstrate multiple growths of flexible, thin-film indium tin oxide-InP Schottky-barrier solar cells on a single InP wafer via epitaxial lift-off (ELO). Layers that protect the InP parent wafer surface during the ELO process are subsequently removed by selective wet-chemical etching, with the active solar cell layers transferred to a thin, flexible plastic host substrate by cold welding at room temperature. The first- and second-growth solar cells exhibit no performance degradation under simulated Atmospheric Mass 1.5 Global (AM 1.5G) illumination, and have a power conversion efficiency of {eta}{sub p}=14.4{+-}0.4% and {eta}{sub p}=14.8{+-}0.2%, respectively. The current-voltage characteristics for the solar cells and atomic force microscope images of the substrate indicate that the parent wafer is undamaged, and is suitable for reuse after ELO and the protection-layer removal processes. X-ray photoelectron spectroscopy, reflection high-energy electron diffraction observation, and three-dimensional surface profiling show a surface that is comparable or improved to the original epiready wafer following ELO. Wafer reuse over multiple cycles suggests that high-efficiency; single-crystal thin-film solar cells may provide a practical path to low-cost solar-to-electrical energy conversion.

36 MATERIALS SCIENCE↗

The crystallinity and mechanical properties of indium tin oxide coatings on polymer substrates

We present the relationship between the microstructure and mechanical strength of indium tin oxide (ITO) on flexible substrates. With varying thickness (h{sub f}), ITO is deposited on polyethylene terephthalate (PET) by dc magnetron sputtering. The microstructure of ITO is controlled by substrate surface conditions and sputtering parameters. The maximum substrate temperature during deposition is limited to 80 deg. C due to the low glass transition temperature (T{sub g}) of PET. The crystallinity and surface roughness (R{sub rms}) are analyzed by high resolution x-ray diffraction, high resolution transmission electron microscopy, and AFM. The crack resistance of ITO is evaluated by uniaxial tension test. The experimental results reveal that, at a fixed h{sub f}, the degree and quality of crystallinity of ITO are highly improved by increasing sputtering power and the substrate temperature. As the crystallinity is improved, the ratio of preferred growth orientations of (222) to (400) is increased and the degree of peak shifts to lower 2{theta} is decreased. They indicate that the crystallinity is improved as the lattice damage is reduced and film density is increased. The tension test results confirm that, up to a certain h{sub f}, the strength of ITO can be significantly enhanced by improving the microstructures.

36 MATERIALS SCIENCE↗

Low Temperature, Self-nucleated Growth of Indium Tin Oxide Nanostructures by Pulsed Laser Deposition in Argon

Indium tin oxide (ITO) nanostructures were successfully deposited on glass substrate by pulsed laser ablation in argon gas at 250 deg. C. Microstructural changes were observed in the argon gas pressure between 30 to 50 mTorr. The as-grown, nanostructured ITO exhibit In{sub 2}O{sub 3} bixbyite structure orientated at <111> direction. At the initial stage of growth, there was a large number of nucleation sites detected which eventually evolved into needle-like branches. The presence of spheres at the tip of these branches indicates that these nanostructured ITO were likely governed by vapor-liquid-solid (VLS) growth mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrical properties of In{sub 2}Se{sub 3} single crystals and photosensitivity of Al/In{sub 2}Se{sub 3} Schottky barriers

In{sub 2}Se{sub 3} single crystals {approx}40 mm long and 14 mm in diameter were grown by the Bridgman method. The composition of grown single crystals and their crystal structure were determined. The conductivity ({sigma}) and Hall constant (R) of grown single crystals were measured and the first Schottky barriers Al/n-In{sub 2}Se{sub 3} were fabricated. Rectification and photovoltaic effect were detected in the new structures. Based on the study of the photosensitivity spectra of Al/n-In{sub 2}Se{sub 3} structures, the nature of the interband transitions and band gap of In{sub 2}Se{sub 3} crystals were determined. It was concluded that the new structures can be applied to develop broadband photoconverters of optical radiation.

36 MATERIALS SCIENCE↗