Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Reduction of the Casimir Force from Indium Tin Oxide Film by UV Treatment

A significant decrease in the magnitude of the Casimir force (from 21% to 35%) was observed after an indium tin oxide sample interacting with an Au sphere was subjected to the UV treatment. Measurements were performed by using an atomic force microscope in high vacuum. The experimental results are compared with theory and a hypothetical explanation for the observed phenomenon is proposed.

36 MATERIALS SCIENCE↗

Electrical Bias as an Alternate Method for Reproducible Measurement of Copper Indium Gallium Diselenide (CIGS) Photovoltaic Modules: Preprint

Light-to-dark metastable changes in thin-film photovoltaic (PV) modules can introduce uncertainty when measuring module performance on indoor flash testing equipment. This study describes a method to stabilize module performance through forward-bias current injection rather than light exposure. Measurements of five pairs of thin-film copper indium gallium diselenide (CIGS) PV modules indicate that forward-bias exposure maintained the PV modules at a stable condition (within 1%) while the unbiased modules degraded in performance by up to 12%. It was additionally found that modules exposed to forward bias exhibited stable performance within about 3% of their long-term outdoor exposed performance. This carrier-injection method provides a way to reduce uncertainty arising from fast transients in thin-film module performance between the time a module is removed from light exposure and when it is measured indoors, effectively simulating continuous light exposure by injecting minority carriers that behave much as photocarriers do. This investigation also provides insight into the initial light-induced transients of thin-film modules upon outdoor deployment.

14 SOLAR ENERGY↗

Deep Subgap Feature in Amorphous Indium Gallium Zinc Oxide. Evidence Against Reduced Indium

Amorphous indium gallium zinc oxide (a-IGZO) is the archetypal transparent amorphous oxide semiconductor. In spite of the gains made with a-IGZO over amorphous silicon in the last decade, the presence of deep subgap states in a-IGZO active layers facilitate instabilities in thin film transistor properties under negative bias illumination stress. Several candidates could contribute to the formation of states within the band gap. We present evidence against In + lone pair active electrons as the origin of the deep subgap features. No In + species are observed, only In0 nano-crystallites under certain oxygen deficient growth conditions. Our results further support under coordinated oxygen as the source of the deep subgap states.

36 MATERIALS SCIENCE↗

High thermoelectric performance of n-type PbTe 1-y S y due to deep lying states induced by indium doping and spinodal decomposition

Good thermoelectric materials should have high engineering figure-of-merit (ZT) eng , not peak ZT, to achieve high conversion efficiency. In this work, we achieved a good (ZT) eng by optimizing the carrier concentration to improve the room temperature ZT using deep lying dopant, indium, in PbTe 1-y S y . It was found that a room temperature ZT as high as ~0.5 and a peak ZT ~1.1 at about 673 K were obtained in Pb 0.98 In 0.02 Te 0.8 S 0.2 due to a lower thermal conductivity by alloy scattering and Spinodal decomposition. The calculated efficiency could be as high as ~12% at cold side 323 K and hot side 773 K. The approach is expected to work in other materials systems too.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Real-time x-ray studies of indium island growth kinetics

The authors have investigated the early stages of indium island formation and growth by vapor phase deposition on room temperature sapphire using real-time grazing incidence small angle x-ray scattering (GISAXS), followed by ex-situ atomic force microscopy and scanning electron microscopy. The results are consistent with the formation and coalescence of hemispherical islands, as described by Family and Meakin. Monte Carlo simulations of systems of coalescing islands were used to supplement and quantify the results of GISAXS, and a good agreement is seen between the data and the simulations.

42 ENGINEERING↗

Inverted polymer solar cells with amorphous indium zinc oxide as the electron-collecting electrode

We report on the fabrication and performance of polymer-based inverted solar cells utilizing amorphous indium zinc oxide (a-IZO) as the electron-collecting electrode. Amorphous IZO films of 200 nm thickness were deposited by room temperature sputtering in a high-purity argon atmosphere. The films possessed a high optical transmittance in the visible region (≥ 80%), a low resistivity (3.3 × 10 -4 Ωcm), a low surface roughness (root mean square = 0.68 nm), and a low work function (4.46 ± 0.02 eV). Inverted solar cells with the structure a-IZO/P3HT: PCBM/PEDOT:PSS/Ag exhibited a power conversion efficiency of 3% estimated for AM 1.5G, 100 mW/cm 2 illumination.

14 SOLAR ENERGY↗

Optical and electrical properties of indium tin oxide films near their laser damage threshold [Electrical and optical properties of indium tin oxide films under multi-pulse laser irradiation at 1064 nm]

In this paper, we investigated whether the optical and electrical properties of indium tin oxide (ITO) films are degraded under laser irradiation below their laser ablation threshold. While performing multi-pulse laser damage experiments on a single ITO film (4.7 ns, 1064 nm, 10 Hz), we examined the optical and electrical properties in situ . A decrease in reflectance was observed prior to laser damage initiation. However, under sub-damage threshold irradiation, conductivity and reflectance of the film were maintained without measurable degradation. This indicates that ITO films in optoelectronic devices may be operated below their lifetime laser damage threshold without noticeable performance degradation.

36 MATERIALS SCIENCE↗

Amorphous Indium-Zinc-Oxide Transparent Conductors for Thin Film PV: Preprint

Amorphous InZnO's (a-IZO) basic PV applicability has now been demonstrated in prototype CIGS, Si Heterojunction (SiHJ) and organic photovoltaics (OPV). However, to move beyond initial demonstration devices, improved TCO properties and processibility of the a-IZO films are needed. Here, RF-superimposed DC sputtering was used to improve the reliable deposition of a-IZO with conductivity > 3000 S/cm.

14 SOLAR ENERGY↗

Amphoteric Indium Enables Carrier Engineering to Enhance the Power Factor and Thermoelectric Performance in n -Type Ag n Pb 100 In n Te 100+2 n (LIST)

The Ag and In co-doped PbTe, Ag n Pb 100 In n Te 100+2n (LIST), exhibits n-type behavior and features unique inherent electronic levels that induce self-tuning carrier density. Results show that In is amphoteric in the LIST, forming both In 3+ and In 1+ centers. Through unique interplay of valence fluctuations in the In centers and conduction band filling, the electron carrier density can be increased from ≈3.1 × 10 18 cm -3 at 323 K to ≈2.4 × 10 19 cm -3 at 820 K, leading to large power factors peaking at ≈16.0 μWcm -1 K -2 at 873 K. The lone pair of electrons from In + can be thermally continuously promoted into the conduction band forming In 3+ , consistent with the amphoteric character of In. Moreover, with rising temperature, the Fermi level shifts into the conduction band, which enlarges the optical band gap based on the Moss–Burstein effect, and reduces bipolar diffusion and thermal conductivity. Adding extra Ag in LIST improves the electrical transport properties and meanwhile lowers the lattice thermal conductivity to ≈0.40 Wm -1 K -1 . Here, the addition of Ag creates spindle-shaped Ag 2 Te nanoprecipitates and atomic-scale interstitials that scatter a broader set of phonons. As a result, a maximum ZT value ≈1.5 at 873 K is achieved in Ag 6 Pb 100 InTe 102 (LIST).

36 MATERIALS SCIENCE↗

Photon and carrier management design for nonplanar thin-film copper indium gallium selenide photovoltaics

Nonplanar structured photovoltaic absorber design has potential to achieve high solar cell efficiency with significantly reduced material use. We report optoelectronic simulations that highlight photon and generated carrier management opportunities for improvement of thin film Cu(In x Ga 1-x )Se 2 (CIGS) device performance. Structures realized via either self-assembly or patterning via nanoimprint lithography, and also a combination of both are predicted to exhibit significant increases in short circuit current density and open circuit voltage simultaneously. The structures investigated include: 1) self-assembled nonplanar structures that strongly scatter incident light and enhance carrier generation near regions of high electric potential, 2) lithographicallypatterned embedded periodic dielectric structures, 3) planar dielectric layers that separate the CIGS absorber from the molybdenum back-contact via reduced-area contacts that minimize optical and electronic losses, 4) a combination of these for combined effects. We find that the self-assembled nonplanar CIGS cells with 700 nm planar equivalent thickness, combined with dielectric separation layers yield increases in short circuit current density and open circuit voltage up to 3.4 mA cm -2 and 29 mV, respectively. The absolute efficiency increases from 15.4% to 18.1%, compared to the predicted efficiency for planar CIGS thin film cells of equivalent thickness. The addition of a single layer MgF 2 anti-reflection coating brings the maximum predicted efficiency up to 19.7% for randomly textured devices.

14 SOLAR ENERGY↗

Epitaxial Atomic Layer Deposition of Sn-Doped Indium Oxide

Coherently strained, epitaxial Sn-doped In2O3 (ITO) thin films were fabricated at temperatures as low as 250 degrees C using atomic layer deposition (ALD) on (001)-, (011)-, and (111)-oriented single-crystal Y-stabilized ZrO2 (YSZ) substrates. Resultant films possess cube-on-cube epitaxial relationships with the underlying YSZ substrates and are smooth, highly conductive, and optically transparent. This epitaxial ALD approach is favorable compared to many conventional growth techniques as it is a large-scale synthesis method that does not necessitate the use of high temperatures or ultrahigh vacuum. These films may prove valuable as a conductive growth template in areas where high-quality crystalline thin film substrates are important, such as solar energy materials, light-emitting diodes, or wide bandgap semiconductors. Furthermore, we discuss the applicability of this ALD system as an excellent model system for the study of ALD surface chemistry, nucleation, and film growth.

Emery, Jonathan D.↗