Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydrodynamical simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Radiative-hydrodynamical simulations of X-ray burst-induced accretion disk coronae

A fully self-consistent radiative hydrodynamical algorithm developed earlier is used to study the 'steady' state coronae in order to simulate the response of the evaporated outflow to a time-dependent irradiation of the disk's surface. It is found that the burst definition is altered at both low and high inclination angles i. At i greater than or approximately equal to 45 deg, the detectable flux is enhanced (as much as 50 percent) by X-rays scattered into the line of sight from the radiation propagation through the corona, and (greater than or approximately equal to 30 percent) by X-rays reflected off the corona when i is less than or approximately equal to 45 deg.

Mella, Fulvio↗

Three-dimensional hydrodynamical simulations of colliding stars . III - Collisions and tidal captures of unequal-mass main-sequence stars

A 3D smooth-particle hydrodynamic code with 7000 particles is used to simulate collisions between lower main sequence (MS) stars whose masses differ by a factor of five. Collisions between point-mass intruders and MS stars are simulated to study how the physics of the encounters depends on the finite radius of the smaller MS stars. It is found that the two MS stars become gravitationally bound in a physical collision if their relative velocity at infinity is less than a critical velocity Vd. Vd decreases from 1000 km/s in a head-on collision to 150 km/s in a grazing one. If the less massive star is replaced by a point mass, Vd remains the same for grazing collision and tidal encounters but drops to about 600 km/s in head-on collisions. The collision and coalescence of two MS stars resets the nuclear clock of the coalesced star, so it contracts to the MS. Tidal capture of binary stars in globular clusters can only occur in encounters in which the closest approach of the two stars to their center of mass is less than 2.0 times the sum of their radii.

Benz, W.↗

The development of a high-resolution Eulerian radiation-hydrodynamics simulation capability for laser-driven Hohlraums

Hohlraums are hollow cylindrical cavities with high-Z material walls used to convert laser energy into uniform x-ray radiation drives for inertial confinement fusion capsule implosions and high energy density physics experiments. Credible computational modeling of hohlraums requires detailed modeling and coupling of laser physics, hydrodynamics, radiation transport, heat transport, and atomic physics. We report on improvements to Los Alamos National Laboratory's xRAGE radiation-hydrodynamics code in order to enable hohlraum modeling. xRAGE's Eulerian hydrodynamics and adaptive mesh refinement make it uniquely well suited to study the impacts of multiscale features in hohlraums. In order to provide confidence in this new modeling capability, we demonstrate xRAGE's ability to produce reasonable agreement with data from several benchmark hohlraum experiments. We also use xRAGE to perform integrated simulations of a recent layered high density carbon capsule implosion on the National Ignition Facility in order to evaluate the potential impacts of the capsule support tent, mixed cell conductivity methodologies, plasma transport, and cross-beam energy transfer (XBT). We find that XBT, seeded by plasma flows in the laser entrance hole (LEH), causes a slight decrease in energy coupling to the capsule and that all of these impact the symmetry of the x-ray drive such that they have an appreciable impact on the capsule implosion shape.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-Dimensional Hydrodynamic Simulations of the Postimpact Proto-Earth

Astrophysical fluid configurations are susceptible to a variety of nonaxisymmetric instabilities under the combined effects of rotation, self-gravity, and thermal pressure. When strong enough, they can induce rapid transport of mass and angular momentum. Our own previous studies of nonaxisymmetric instabilities in model protostars and protostellar disks show that significant transport can occur on orbital timescales and that material can be ejected to large distances. In this contribution, we present three-dimensional simulations of the circumterrestrial debris belt that may have resulted from a giant impact. Our three-dimensional hydrodynamics code with self-gravity and artificial viscosity is fully second-order in space and time; the equations of hydrodynamics and the Poisson equation are solved on an Eulerian cylindrical grid. In the preliminary calculations presented here, we use a simplified EOS where the central proto-Earth is treated as an n = 1/2 polytropic fluid, surrounded by a more compressible, rapidly rotating, fluid disk that represents silicate vapor. Our initial disk parameters are generated from the endstate data of recent smoothed particle hydrodynamics giant-impact calculations. Ultimately, we wish to detennine under what conditions nonaxisymmetric instabilities grow in the postimpact disk and whether they facilitate the transport of material outside the proto-Earth's Roche Limit, leading to the formation of the Moon. In future work, we hope to include a more realistic EOS and the consequences of heating, cooling, and phase transitions.

Pickett, B. K.↗

Ab-initio General-relativistic Neutrino-radiation Hydrodynamics Simulations of Long-lived Neutron Star Merger Remnants to Neutrino Cooling Timescales

Abstract We perform the first 3D ab-initio general-relativistic neutrino-radiation hydrodynamics of a long-lived neutron star merger remnant spanning a fraction of its cooling timescale. We find that neutrino cooling becomes the dominant energy loss mechanism after the gravitational-wave dominated phase (∼20 ms postmerger). Electron flavor antineutrino luminosity dominates over electron flavor neutrino luminosity at early times, resulting in a secular increase of the electron fraction in the outer layers of the remnant. However, the two luminosities become comparable ∼20–40 ms postmerger. A dense gas of electron antineutrinos is formed in the outer core of the remnant at densities ∼10 14.5 g cm −3 , corresponding to temperature hot spots. The neutrinos account for ∼10% of the lepton number in this region. Despite the negative radial temperature gradient, the radial entropy gradient remains positive, and the remnant is stably stratified according to the Ledoux criterion for convection. A massive accretion disk is formed from the material squeezed out of the collisional interface between the stars. The disk carries a large fraction of the angular momentum of the system, allowing the remnant massive neutron star to settle to a quasi-steady equilibrium within the region of possible, stable, rigidly rotating configurations. The remnant is differentially rotating, but it is stable against the magnetorotational instability. Other MHD mechanisms operating on longer timescales are likely responsible for the removal of the differential rotation. Our results indicate the remnant massive neutron star is thus qualitatively different from a protoneutron stars formed in core-collapse supernovae.

79 ASTRONOMY AND ASTROPHYSICS↗

Element Formation in Radiation-hydrodynamics Simulations of Kilonovae

Abstract Understanding the details of r -process nucleosynthesis in binary neutron star merger (BNSM) ejecta is key to interpreting kilonova observations and identifying the role of BNSMs in the origin of heavy elements. We present a self-consistent, two-dimensional, ray-by-ray radiation-hydrodynamic evolution of BNSM ejecta with an online nuclear network (NN) up to a timescale of days. For the first time, an initial numerical relativity ejecta profile composed of the dynamical component and spiral-wave and disk winds is evolved including detailed r -process reactions and nuclear heating effects. A simple model for the jet energy deposition is also included. Our simulation highlights that the common approach of relating in postprocessing the final nucleosynthesis yields to the initial thermodynamic profile of the ejecta can lead to inaccurate predictions. Moreover, we find that neglecting the details of the radiation-hydrodynamic evolution of the ejecta in nuclear calculations can introduce deviations of up to 1 order of magnitude in the final abundances of several elements, including very light and second r -process peak elements. The presence of a jet affects element production only in the innermost part of the polar ejecta, and it does not alter the global nucleosynthesis results. Overall, our analysis shows that employing an online NN improves the reliability of nucleosynthesis and kilonova light-curve predictions.

Magistrelli, Fabio (ORCID:0009000509767851)↗

flash -light on the ring : hydrodynamic simulations of expanding supernova shells near supermassive black holes

ABSTRACT The way supermassive black holes (SMBHs) in Galactic Centres (GCs) accumulate their mass is not completely determined. At large scales, it is governed by galactic encounters, mass inflows connected to spirals arms and bars, or due to expanding shells from supernova (SN) explosions in the central parts of galaxies. The investigation of the latter process requires an extensive set of gas dynamical simulations to explore the multidimensional parameter space needed to frame the phenomenon. The aims of this paper are to extend our investigation of the importance of SNe for inducing accretion on to an SMBH and carry out a comparison between the fully hydrodynamic code flash and the much less computationally intensive code ring, which uses the thin shell approximation. We simulate 3D expanding shells in a gravitational potential similar to that of the GC with a variety of homogeneous and turbulent environments. In homogeneous media, we find convincing agreement between flash and ring in the shapes of shells and their equivalent radii throughout their whole evolution until they become subsonic. In highly inhomogeneous, turbulent media, there is also a good agreement of shapes and sizes of shells, and of the times of their first contact with the central 1-pc sphere, where we assume that they join the accretion flow. The comparison supports the proposition that an SN occurring at a galactocentric distance of 5 pc typically drives 1–3 M⊙ into the central 1 pc around the GC.

79 ASTRONOMY AND ASTROPHYSICS↗

Implementing a microphysics model in hydrodynamic simulations to study the initial plasma formation in dielectric ablator materials for direct-drive implosions

A microphysics model to describe the photoionization and impact ionization processes in dielectric ablator materials like plastic has been implemented into the 1-D hydrodynamic code LILAC for planar and spherical targets. Currently, the initial plasma formation during the early stages of a laser drive are modeled in an ad hoc manner, until the formation of a critical surface. Implementation of the physics-based models predict higher values of electron density, electron temperature, and pressure than the ad hoc model. Moreover, the numerical predictions are consistent with previous experimental observations of the shinethrough mechanism in plastic ablators. For planar targets, a decompression of the rear end of the target was observed, that is similar to recent experiments. An application of this model is to understand the laser-imprint mechanism that is caused by nonuniform laser irradiation due to single beam speckle.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrodynamic Simulations of Oxygen–Neon Classical Novae as Galactic 7 Li Producers and Potential Accretion-induced Collapse Progenitors*

Abstract We report on studies of classical nova (CN) explosions where we follow the evolution of thermonuclear runaways (TNRs) on oxygen–neon (ONe) white dwarfs (WDs). Using NOVA, a 1D hydrodynamic computer code, we accrete solar matter until the TNR is ongoing and then switch to a mixed composition. This approach is guided by the results of multidimensional studies of TNRs in WDs, which find that sufficient mixing with WD core material occurs after the TNR is well underway, and levels of enrichment of the CNONeMg elements are reached that agree with observations of CN ejecta abundances. Because the amount of accreted material is inversely proportional to the oxygen abundance, by first accreting solar matter, the amount of accreted material is larger than in those simulations with an initially enriched composition. We vary the mass of the WD (from 0.6 M ⊙ to 1.35 M ⊙ ) and the composition of the mixed materials. Our results show large enrichments of 7 Be in the ejected gases, implying that ONe CNe and CO CNe may be responsible for a significant fraction (∼100 M ⊙ ) of the Galactic 7 Li (∼1000 M ⊙ ). The production of 22 Na and 26 Al in CN explosions and the γ -ray emission predicted by our simulations are discussed. The WDs in all our simulations eject less material than they accrete and we predict that the WD is growing in mass as a consequence of the CN outburst. ONe CNe, therefore, may be an important channel for accretion-induced collapse events.

Starrfield, Sumner (ORCID:0000000213596312)↗

LDRD Abbreviated report: High-Order General-Discrete-Ordinates Method Enabling Efficient Deterministic Transport in Hydrodynamic Simulations

Deterministic transport simulations for national-security and energy applications often operate in high-dimensional phase-space, where accuracy and cost both become major challenges. A common numerical artifact in such problems is the “ray-effect,” which appears as unphysical streaks. Beyond misinterpretation, these artifacts can contaminate tightly coupled physics, such as fluid dynamics, radiation-hydrodynamics, and laser-plasma interactions, eroding the predictive capability of entire multiphysics workflows. Our objective was to make high-dimension studies practical on modern hardware while mitigating the ray-effect without relying on prohibitively expensive sampling approaches such as Monte Carlo methods. We developed the Generic Discretization Library (GenDiL), a Graphics Processing Unit (GPU)-first framework that uses high-order Discontinuous Galerkin (DG) methods and matrix-free algorithms to reduce memory usage and improve computational efficiency, critical for phase-space simulations. GenDiL supports phase-space adaptivity in both mesh size and polynomial order (hp-adaptivity) to place resolution only where it is needed. A central capability is Local Dimensional Refinement (LDR), which couples lower-dimension continuum models to higher-dimension kinetic models through stable and conservative interfaces, so that high-fidelity physics is applied only in regions where it is essential. Building on the GenDiL framework, we developed the General SN (GSN) family of algorithms as a true generalization of the polar SN approach (discrete ordinates, often denoted SN). Rather than tying discrete ordinates to a specific polar change of coordinates, GSN formulates transport on an arbitrary change of coordinates chosen to reduce ray-effect. We studied two complementary variants: an analytic variant, where the coordinate map is prescribed in advance by a closed-form function; and a data-driven variant, where a quantity of interest, such as the net flux, guides the coordinate system. GenDiL provides the library infrastructure for efficient GPU execution, but the GSN concept is algorithmic and independent of any one library. Across representative high-dimension tests, including non-symmetric solutions, both variants delivered strong ray-effect mitigation at practical cost, moving four- to six-dimensional analysis toward repeatable, routine studies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Achieving Higher Order Accuracy in Space in Hydrodynamic Simulations of Self-Gravitating Gas

Modern astrophysical simulation codes employ a variety of numerical algorithms capable of achieving higher-order accuracy in both space and time. Albeit they succeed in achieving an effective higher spatial resolution and in suppressing the numerical damping of waves, to our knowledge, all current astrophysical simulations invoking self-gravity are limited to second-order accuracy in space. If we can devise an algorithm to evaluate self-gravity with a higher-order spatial accuracy, we can better the evaluation of the gravitational acceleration and gravitational energy release which dictate the evolution of many astrophysical systems. Herein, we present a numerical algorithm for self-gravitating hydrodynamics capable of achieving fourth-order accuracy for a given density distribution on a Cartesian uniform grid. First, we derive the cell-averaged gravitational potential at fourth-order accuracy from the cell-averaged density by solving the Poisson equation. Next, we obtain the cell average of the product of the density and gravitational acceleration, which differs from the cell-averaged density multiplied by the cell-averaged gravitational acceleration. We then show the verification of the algorithm by applying it to critical test problems: (1) maintaining equilibria of self-gravitating slabs, even upon advection, (2) evolving a polytropic sphere with a massive power-law envelope, and (3) conservation of specific entropy during the propagation of a sound wave.

79 ASTRONOMY AND ASTROPHYSICS↗

Achieving Higher Order Accuracy in Space in Hydrodynamic Simulations of Self-Gravitating Gas

Modern astrophysical simulation codes employ a variety of numerical algorithms capable of achieving higher-order accuracy in both space and time. Albeit they succeed in achieving an effective higher spatial resolution and in suppressing the numerical damping of waves, to our knowledge, all current astrophysical simulations invoking self-gravity are limited to second-order accuracy in space. If we can devise an algorithm to evaluate self-gravity with a higher-order spatial accuracy, we can better the evaluation of the gravitational acceleration and gravitational energy release which dictate the evolution of many astrophysical systems. Herein, we present a numerical algorithm for self-gravitating hydrodynamics capable of achieving fourth order accuracy for a given density distribution on a Cartesian uniform grid. First, we derive the cell-averaged gravitational potential at fourth-order accuracy from the cell-averaged density by solving the Poisson equation. Next, we obtain the cell average of the product of the density and gravitational acceleration, which differs from the cell-averaged density multiplied by the cell-averaged gravitational acceleration. We then show the verification of the algorithm by applying it to critical test problems: (1) maintaining equilibria of self-gravitating slabs, even upon advection, (2) evolving a polytropic sphere with a massive power-law envelope, and (3) conservation of specific entropy during the propagation of a sound wave.

79 ASTRONOMY AND ASTROPHYSICS↗

A study of convective core overshooting as a function of stellar mass based on two-dimensional hydrodynamical simulations

ABSTRACT We perform two-dimensional (2D) numerical simulations of core convection for zero-age main-sequence stars covering a mass range from 3 to 20 M⊙. The simulations are performed with the fully compressible time-implicit code music. We study the efficiency of overshooting, which describes the ballistic process of convective flows crossing a convective boundary, as a function of stellar mass and luminosity. We also study the impact of artificially increasing the stellar luminosity for 3 M⊙ models. The simulations cover hundreds to thousands of convective turnover time-scales. Applying the framework of extreme plume events previously developed for convective envelopes, we derive overshooting lengths as a function of stellar masses. We find that the overshooting distance (dov) scales with the stellar luminosity (L) and the convective core radius (rconv). We derive a scaling law $d_{\rm ov} \propto L^{1/3} r_{\rm conv}^{1/2}$, which is implemented in a one-dimensional stellar evolution code and the resulting stellar models are compared to observations. The scaling predicts values for the overshooting distance that significantly increase with stellar mass, in qualitative agreement with observations. Quantitatively, however, the predicted values are underestimated for masses ≳10 M⊙. Our 2D simulations show the formation of a nearly adiabatic layer just above the Schwarzschild boundary of the convective core, as exhibited in recent three-dimensional simulations of convection. The most luminous models show a growth in size with time of the nearly adiabatic layer. This growth seems to slow down as the upper edge of the nearly adiabatic layer gets closer to the maximum overshooting length and as the simulation time exceeds the typical thermal diffusive time-scale in the overshooting layer.

79 ASTRONOMY AND ASTROPHYSICS↗

CG-Kit: Code Generation Toolkit for performant and maintainable variants of source code applied to Flash-X hydrodynamics simulations

CG-Kit is a new Code Generation tool-Kit that we have developed as a part of the solution for portability and maintainability for multiphysics computing applications. The development of CG-Kit is rooted in the urgent need created by the shifting landscape of high-performance computing platforms and the algorithmic complexities of a particular large-scale multiphysics application: Flash-X. To efficiently use computing resources on a heterogeneous node, an application must have a map of computation to resources and a mechanism to move the data and computation to the resources according to the map. Most existing performance portability solutions are focussed on abstracting the expression of computations so that a unified source code can be specialized to run on different resources. However, such an approach is insufficient for a code like Flash-X, which has a multitude of code components that can be assembled in various permutations and combinations to form different instances of applications. Similar challenges apply to any code that has composability, where a single specified way of apportioning work among devices may not be optimal. Additionally, use cases arise where the optimal control flow of computation may differ for different devices while the underlying numerics remain identical. This combination leads to unique challenges including handling an existing large code base in Fortran and/or C/C++, subdivision of code into a great variety of units supporting a wide range of physics and numerical methods, different parallelization techniques for distributed and shared memory systems and accelerator devices, and heterogeneity of computing platforms requiring coexisting variants of parallel algorithms. All of these challenges demand that scientific software developers apply existing knowledge about domain applications, algorithms, and computing platforms to determine custom abstractions and granularity for code generation. There is a critical lack of tools to tackle those problems. CG-Kit is designed to fill this gap by providing a user with the ability to express their desired control flow and computation-to-resource map in the form a pseudocode-like recipe. It consists of standalone tools that can be combined into highly specific and, we argue, highly effective portability and maintainability toolchains. Here we present the design of our new tools: parametrized source trees, control flow graphs, and recipes. The tools are implemented in Python. They are agnostic to the programming language of the source code targeted for code generation. In conclusion, we demonstrate the capabilities of the toolkit with two examples, first, multithreaded variants of the basic AXPY operation, and second, variants of parallel algorithms within a hydrodynamics solver, called Spark, from Flash-X that operates on block-structured adaptive meshes.

Algorithmic portability↗

Nonlocal effects on thermal transport in hydrodynamic simulations of unmagnetized MagLIF-relevant gaspipes on NIF

We present simulations of heat flow relevant to gaspipe experiments on the National Ignition Facility to investigate kinetic effects on transport phenomena. D 2 and neopentane (C 5 H 12 ) filled targets are used to study the laser preheat stage of a MagLIF scheme where an axial magnetic field is sometimes applied to the target. Simulations were done with the radiation-MHD code HYDRA with a collision-dominated fluid model and the SNB nonlocal electron thermal conduction model. Using the SNB model to evolve the electron temperature increased the heat front propagation of neopentane gas targets compared to a local model by limiting radial heat flow. This increases electron temperature near the axis, which decreases laser absorption. We find that the effect of heat flow models on temperature profiles and laser propagation is modest. Beyond the SNB model, we utilize HYDRA to initialize plasma conditions for the Vlasov–Fokker–Planck K2 code. We run K2 until a quasi-steady state is reached and examine the impact of kinetic effects on heat transport. Although axial heat flow is well predicted by fluid models, the fluid model consistently overpredicts radial heat flow up to 150% in regions with the largest temperature gradient of D 2 filled gaspipes. On the other hand, the SNB nonlocal electron conduction model is found to be adequate for capturing kinetic heat flow in gaspipes.

Lau, Ryan Y. [Univ. of Colorado, Boulder, CO (Unit↗

Stellar and weak lensing profiles of massive galaxies in the Hyper-Suprime Cam survey and in hydrodynamic simulations

ABSTRACT We perform a consistent comparison of the mass and mass profiles of massive (M⋆ > 1011.4 M⊙) central galaxies at z ∼ 0.4 from deep Hyper Suprime-Cam (HSC) observations and from the Illustris, TNG100, and Ponos simulations. Weak lensing measurements from HSC enable measurements at fixed halo mass and provide constraints on the strength and impact of feedback at different halo mass scales. We compare the stellar mass function (SMF) and the Stellar-to-Halo Mass Relation (SHMR) at various radii and show that the radius at which the comparison is performed is important. In general, Illustris and TNG100 display steeper values of α where $M_{\star } \propto M_{\rm vir}^{\alpha }$. These differences are more pronounced for Illustris than for TNG100 and in the inner rather than outer regions of galaxies. Differences in the inner regions may suggest that TNG100 is too efficient at quenching in situ star formation at Mvir ≃ 1013 M⊙ but not efficient enough at Mvir ≃ 1014 M⊙. The outer stellar masses are in excellent agreement with our observations at Mvir ≃ 1013 M⊙, but both Illustris and TNG100 display excess outer mass as Mvir ≃ 1014 M⊙ (by ∼0.25 and ∼0.12 dex, respectively). We argue that reducing stellar growth at early times in $M_\star \sim 10^{9-10} \, \mathrm{M}_{\odot }$ galaxies would help to prevent excess ex-situ growth at this mass scale. The Ponos simulations do not implement AGN feedback and display an excess mass of ∼0.5 dex at r < 30 kpc compared to HSC which is indicative of overcooling and excess star formation in the central regions. The comparison of the inner profiles of Ponos and HSC suggests that the physical scale over which the central AGN limits star formation is r ≲ 20 kpc. Joint comparisons between weak lensing and galaxy stellar profiles are a direct test of whether simulations build and deposit galaxy mass in the correct dark matter haloes and thereby provide powerful constraints on the physics of feedback and galaxy growth. Our galaxy and weak lensing profiles are publicly available to facilitate comparisons with other simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

GalaxyFlow: upsampling hydrodynamical simulations for realistic mock stellar catalogues

ABSTRACT Cosmological N-body simulations of galaxies operate at the level of ‘star particles’ with a mass resolution on the scale of thousands of solar masses. Turning these simulations into stellar mock catalogues requires ‘upsampling’ the star particles into individual stars following the same phase-space density. In this paper, we introduce two new upsampling methods. First, we describe GalaxyFlow, a sophisticated upsampling method that utilizes normalizing flows to both estimate the stellar phase-space density and sample from it. Secondly, we improve on existing upsamplers based on adaptive kernel density estimation (KDE), using maximum likelihood estimation to fine-tune the bandwidth for such algorithms in a way that improves both the density estimation accuracy and upsampling results. We demonstrate our upsampling techniques on a neighbourhood of the Solar location in two simulated galaxies: Auriga 6 and h277. Both yield smooth stellar distributions that closely resemble the stellar densities seen in the Gaia DR3 catalogue. Furthermore, we introduce a novel multimodel classifier test to compare the accuracy of different upsampling methods quantitatively. This test confirms that GalaxyFlow more accurately estimates the density of the underlying star particles than methods based on KDE, at the cost of being more computationally intensive.

Lim, Sung Hak (ORCID:0000000330981092)↗

General relativistic hydrodynamic simulations of binary strange star mergers

We perform fully general-relativistic simulations of binary strange star mergers considering two different approaches for thermal effects. The first uses a cold equation of state (EOS) derived from a modified version of the MIT bag model which is then supplemented by a Γ-law correction. The second approach employs a microphysical description of the finite-temperature effects. We describe results obtained with the two treatments, highlighting the influence of thermal effects. We find that the postmerger dynamics differs significantly in the two cases, leading to quantitative differences in the postmerger gravitational-wave spectrum and ejecta mass. The peak frequency of the postmerger gravitational-wave emission is consistent with the established quasi-universal relations for binary neutron star mergers and as a result, our simulations cannot distinguish between mergers of neutron stars and those of strange stars. Our models with realistic treatment of finite-temperature effects produce a significant amount of ejecta ≳0.02 M ⊙ ​. Here, the resulting flux of strangelets near the Earth, computed assuming that all neutron star mergers are in fact strange-stars mergers and that the binary considered here is representative, is in tension with experimental upper limits. As such, our results tentatively disfavor a scenario in which strange-quark matter is the lowest energy state of matter.

79 ASTRONOMY AND ASTROPHYSICS↗