Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydrocarbon trap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A two-stage strategy for upcycling chlorine-contaminated plastic waste

Abstract Chemical upcycling of polyolefin plastic waste to lubricant, wax and fuel-range hydrocarbons over metal-based catalysts is a crucial technological solution to the enormous environmental threat posed by plastic waste. However, currently available methods are incompatible with chlorine-contaminated feedstocks. Here we report a two-stage strategy for upcycling chlorine-contaminated polypropylene. First, magnesia–alumina mixed oxide at 30 bar H 2 and 250 °C serves as a chlorine trap by rapidly forming solid chloride, resulting in nearly complete chlorine extraction from the polyolefin melt. This enables the upcycling of plastic waste with up to 10% polyvinyl chloride content to lubricants over ruthenium-based catalysts, in the second stage. The strategy is also applicable to chlorinated aromatics and alkanes. The proposed strategy renders hydrocracking and hydrogenolysis catalysts less sensitive to the chlorine impurities in feedstocks while eliminating HCl emissions and chlorine contamination in products. It could incentivize further progress in plastics upcycling.

Environmental Sciences & Ecology↗
DOE OSTI2025

Geologic hydrogen: From natural occurrences to anthropogenic generation – A review of fundamentals, potential, challenges and prospects

Growing demand for hydrogen is exposing the environmental and economic limits of reforming-based and carbon-managed supply chains, while the scale-up of electrolytic capacity remains capital-constrained. Geologic hydrogen, defined as molecular H₂ generated and stored within the Earth's crust offers a complementary, potentially lower-cost resource, yet exploration is still ad hoc. This review (1) revisits a global inventory of confirmed hydrogen seeps and subsurface occurrences; (2) analyzes the controlling reactions, migration pathways, and trapping conditions governing these occurrences; (3) proposes a process-based geologic hydrogen system concept analogous to, yet distinct from, the petroleum system; and (4) evaluates potential geologic hydrogen systems within the United States as a representative case study. Here, we contrast natural systems powered by serpentinization, mantle degassing or radiolysis with anthropogenic systems that stimulate the same reactions or convert in-situ hydrocarbons. Stable hydrogen accumulations require generation rates that outpace combined physical, chemical and microbial losses; the Bourakébougou field (Mali) exemplifies a self-recharging, free-gas reservoir sustained by meteoric-water serpentinization beneath an efficient caprock. Prospective geologic hydrogen resources are likely to occur in regions where iron-rich lithologies, deep-seated faults, and low-permeability sealing formations coexist. Applying this principle, we highlight three promising hydrogen play types in U.S. geological terrains: ophiolite belts (Appalachian and Californian regions), the Midcontinent Rift and the Lake Superior banded‑iron formations. Multiphysics numerical models and positive-unlabeled machine-learning workflows help to accelerate play screening and de-risk future production; yet, reaction kinetics, stimulation strategies, and full techno-economic and life-cycle assessments remain pivotal knowledge gaps.

Anthropogenic hydrogen generation↗
DOE OSTI2022

Opening-mode fracturing and cementation during hydrocarbon generation in shale: An example from the Barnett Shale, Delaware Basin, West Texas

Relative timing of fracturing is a key input for predictive fracture models, but timing information for fractures is commonly difficult to obtain. In this study, we used crosscutting relations and fluid inclusion assemblage temperatures from fracture cements from a few well-documented sampled fractures, combined with a one-dimensional burial history model, to establish timing for three generations of opening-mode fractures in a Barnett Shale core from the southern part of the Delaware Basin, Pecos County, West Texas. A burial history model is presented for the cored well and matched to measured vitrinite reflectance in samples from the core, and bottomhole temperature in the well. Here, the earliest fractures (group 1) likely formed due to early fluid-expulsion events (ca. 300 Ma) and were folded during host-rock compaction. Later group 2 fractures are sealed with fibrous barite containing primary, liquid hydrocarbon inclusions (mean homogenization temperature [T h ] = –9°C) and aqueous fluid inclusions (mean T h = 108.1°C). Group 2 fractures likely formed in response to fluid overpressure associated with cracking of type II kerogen to oil. Group 3 vertical fractures are up to 2 m in height with kinematic apertures ranging from less than 0.05 to 1.4 mm, partly open, and strike dominantly 010°–020°. Sequentially trapped aqueous fluid inclusions in fracture-spanning quartz cement bridges (mean T h = 110°C in crack-seal texture and 128°C in post-crack-seal fracture cement) record fracture opening under increasing temperature, inferred to reflect increasing burial, with continued overpressuring during the Triassic to Late Cretaceous. Some group 3 fractures may have continued to fill during Cenozoic uplift.

02 PETROLEUM↗
DOE OSTI2024

Water–Hydrocarbon Interactions in Anionic Pyrene Monohydrate

Interactions between water and polycyclic aromatic hydrocarbons are essential in many aspects of chemistry, from interstellar and atmospheric processes to interfacial hydrophobicity and wetting phenomena. Despite their growing importance, the intermolecular potentials of the water-hydrocarbon interactions are underdeveloped compared to water-water potentials, and there are similarly few experimental probes that are sensitive to the details of the water-hydrocarbon potential. We present a combined experimental and computational study of anionic pyrene monohydrate, one of the simplest water/hydrocarbon clusters. The action spectrum in the OH region of the mass-selected cluster ion provides a rigorous benchmark for intermolecular potentials and computational methodologies. We identify missing intermolecular interactions and shortcomings in conventional dynamics calculations by comparing experimental data to density functional theory and classical molecular dynamics calculations. Kinetic trapping is prevalent, even for one water molecule and one pyrene molecule, leading to slow equilibration in conventional molecular dynamics calculations, even on nanosecond timescales and at low temperatures (50 K). At constant energy, temperature fluctuations for the pair of molecules are substantial. Immersing the system in a bath of soft spheres and employing parallel tempering alleviates kinetic trapping and dampens temperature fluctuations, bringing the system closer to the thermodynamic limit. With such augmented sampling, a simple, flexible water model reproduces the linewidth and the asymmetric broadening of the symmetric OH stretching mode, which we assign to spectral diffusion. In the OH stretching region, dynamics calculations predict a more intense antisymmetric peak than experiments observe but do not predict the bimodal split symmetric peak that the experiments show. Furthermore, our work suggests that electronic polarization, missing in the empirical force field, is responsible for the first discrepancy and that quantum nuclear effects, captured neither in density functional theory nor in classical dynamics, may be responsible for the second.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

CO Reduction to Ethylene and Cyclopropane via a Trappable Ruthenium Methylidene

Ruthenium complexes based on cis-[Ru(bpy) 2 (CO) 2 ] 2+ (bpy is 2,2′-bipyridine) can reduce CO 2 and CO to C 1 products including methanol, but access to products containing C–C bonds has been elusive. A reaction pathway to convert CO into multicarbon products ethylene and cyclopropane is presented here, along with mechanistic studies elucidating the key intermediates in C–C bond formation. The ruthenium hydroxymethyl complex [Ru(bpy′) 2 (CO)(CH 2 OH)] + (bpy′ = 5,5′-dimethyl-2,2′-bipyridine) undergoes protonolysis to generate the ethylene complex [Ru(bpy′) 2 (CO)(C 2 H 4 )] 2+ even at −80 °C, with free ethylene released upon warming to room temperature. Experimental evidence implicates a highly electrophilic methylidene complex [Ru(bpy′) 2 (CO)(CH 2 )] 2+ as the key intermediate. The methylidene was successfully trapped with nitriles and pyridine, forming adducts (ylide complexes) that each have a unique reactivity profile. With an appropriate nitrile, the adduct can be characterized at low temperature before warming generates ethylene. A more stable pyridine adduct [Ru(bpy′) 2 (CO)(CH 2 pyridine)] 2+ was crystallographically characterized. Even ethylene itself is sufficiently nucleophilic to react with the electrophilic methylidene, revealing a route from CO to the C 3 hydrocarbon cyclopropane. Furthermore, the methods for controlling the reactivity of hydroxymethyl and methylidene complexes toward C–C bond formation can inform the development of CO and CO 2 reduction catalysts.

Carbene Compounds↗
DOE OSTI2021

Machine learning to discover mineral trapping signatures due to CO 2 injection

Mineral trapping is pursued as a geological CO 2 sequestration (GCS) mechanism because it permanently stores CO 2 in solid phases or minerals. However, CO 2 mineral-trapping mechanisms are poorly understood due to (1) lack of sufficient field and laboratory data characterizing these complex processes, and (2) challenges to develop site-specific reactive-transport models coupling fluid flow and geochemical reactions occurring at various temporal (from milliseconds to years) and spatial (from pore (millimeters) to field (kilometers)) scales. Reactive transport with additional complexities such as heterogeneity can make the simulation outputs even more difficult to interpret because of complex nonlinearity and multi-scale interdependencies. Furthermore, the values of model outputs such as concentrations can vary by several orders of magnitude, making it harder to correlate and characterize the impact of the variables via traditional data interpretation techniques such as exploratory data analyses. Recently, machine learning (ML) has shown promise in feature discovery and in highlighting hidden mechanisms that cannot be obtained by existing data-analytics and statistical methods. In this study, we applied an unsupervised ML approach, non-negative matrix factorization with custom -means clustering (NMF) to the data generated by reactive-transport simulations of GCS. The reactive-transport data consisted of 19 attributes, including four physio-chemical variables (pH, porosity, aqueous CO 2 , and sequestered CO 2 ), six chemical species (K + , Na + , HCO, Ca 2+ , Mg 2+ , Fe 2+ ), and four carbonate minerals (calcite, dolomite, siderite, and ankerite), a feldspar mineral (albite), and four clay minerals (illite, clinochlore, kaolinite, and smectite) over a period of 200 years of simulation time. Furthermore, the simulation data used was for Morrow B sandstone at the Farnsworth hydrocarbon unit in Texas. Data are sampled at two locations within the model domain: (1) at the injection well and (2) 200 m west of the injection well. The injection was performed for a period of 10 years. Using NMF, we estimated the temporal interdependencies among the 19 attributes over a span of 200 years. We found that NMF was able to identify four reaction stages and their dominant attributes; these cannot be directly discerned through traditional visualization (e.g., line plots, Pareto analysis, Glyph-based visualization methods) or exploratory data analysis tools of the simulation data. The four stages were: reactions in the injection phase followed by short-, mid-, and long-term reactions. The NMF analysis also revealed that 10 among the 19 attributes are dominant. These dominant attributes for mineral trapping include calcite, dolomite at injection well, siderite at 200 m away from the injection well, clinochlore, kaolinite, Na + , K + , Ca 2+ , Mg 2+ , pH, and aqeuous CO 2 . Finally, at late times (65–200 years), our results showed that calcite plays a major role in mineral trapping with insignificant contribution from siderite, ankerite, and clay minerals. These findings make the proposed unsupervised ML-model attractive for reactive-transport sensing towards real-time GCS monitoring.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Monitoring Offshore CO 2 Sequestration Using Marine CSEM Methods; Constraints Inferred from Field- and Laboratory-Based Gas Hydrate Studies

Offshore geological sequestration of CO 2 offers a viable approach for reducing greenhouse gas emissions into the atmosphere. Strategies include injection of CO 2 into the deep-ocean or ocean-floor sediments, whereby depending on pressure–temperature conditions, CO 2 can be trapped physically, gravitationally, or converted to CO 2 hydrate. Energy-driven research continues to also advance CO 2 -for-CH 4 replacement strategies in the gas hydrate stability zone (GHSZ), producing methane for natural gas needs while sequestering CO 2 . In all cases, safe storage of CO 2 requires reliable monitoring of the targeted CO 2 injection sites and the integrity of the repository over time, including possible leakage. Electromagnetic technologies used for oil and gas exploration, sensitive to electrical conductivity, have long been considered an optimal monitoring method, as CO 2 , similar to hydrocarbons, typically exhibits lower conductivity than the surrounding medium. We apply 3D controlled-source electromagnetic (CSEM) forward modeling code to simulate an evolving CO 2 reservoir in deep-ocean sediments, demonstrating sufficient sensitivity and resolution of CSEM data to detect reservoir changes even before sophisticated inversion of data. Laboratory measurements place further constraints on evaluating certain systems within the GHSZ; notably, CO 2 hydrate is measurably weaker than methane hydrate, and >1 order of magnitude more conductive, properties that may affect site selection, stability, and modeling considerations.

58 GEOSCIENCES↗
DOE OSTI2021

Influence of interfacial responses of Berea Sandstone in low-salinity waterflooding environments

Wetting conditions and fluid-fluid interfacial properties are essential to understanding oil recovery in the context of low-salinity and smart waterflooding. Many have deemed wettability alteration to be the dominant interaction, while some highlight the importance of fluid-fluid interactions. In some rock-fluid systems, benefits from the use of additives can arise to favor hydrocarbon production. Understanding the balance between the fluid-fluid and rock-fluid interactions when utilizing additives is crucial to evaluate benefits in improved efficiency. Ultimately, this understanding will shed light on recovery mechanisms. Regarding oil recovery, previous studies indicate that the injection of a naphthenic acid (NA) blend dissolved in an injection brine improves oil recovery in Berea Sandstone, particularly under low-salinity conditions. Interfacial rheology results for the brine-oil interface correlated well with the recovery response. This observation was speculated to serve as a potential improved recovery mechanism through oil-trapping suppression. However, the said studies did not evaluate potentially concurrent rock wettability alteration during recovery or the initial wetting condition. The purpose of this work is to determine the production behavior in systems with NAs, namely NA-10 (3-Cyclohexanepropinoic acid), NA-14 (Cyclopentane carboxylic acid), NA-18 (Cyclohexane carboxylic acid), and NA-mix (Naphthenic acid mixture), at different initial wetting conditions under spontaneous imbibition. In addition, we tested the NAs ability to alter wettability in Berea Sandstone and determine each “additive’s” capacity to improve recovery. Here, time-domain nuclear magnetic resonance (TD-NMR), contact angle, and Amott cell tests, i.e. spontaneous imbibition, were used to analyze the influence of the selected naphthenic acids on oil displacement under different initial wetting conditions. Our results indicate that individual naphthenic acids indeed have potential as additives in low-salinity waterflooding for oil-wet systems while negatively impacting recovery in water-wet systems. However, results suggest that the evolution of the interfacial properties and wettability conditions are equally important on the recovery behavior.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Workflow for Developing and Operating Subsurface Hydrogen Storage Facilities in Porous Reservoirs

Long-duration (seasonal) storage of natural gas (NG), which primarily consists of methane (CH 4 ), has been practiced for more than a hundred years at underground gas storage (UGS) facilities that use depleted hydrocarbon reservoirs, saline aquifers, and salt caverns. To enable hydrogen (H 2 ) to be used as a long-duration, energy-storage medium, similar facilities are envisioned for underground H 2 storage (UHS) of either H 2 or H 2 /NG mixtures. Experience with UGS can be used to guide recommended practices for developing and operating UHS facilities in porous reservoirs. The most important factors (formation/fluid properties and engineering choices) that influence the performance of UHS reservoirs have been identified and quantified in previous studies. These factors and choices influence phenomena that determine the sweep efficiency of the stored working gas. These phenomena include viscous fingering, hysteretic capillary trapping, and gravity override of the working gas, as well as the upconing of nonproductive fluid that determine the sweep efficiency of the stored working gas. This report describes initial recommended-practices and a project-development workflow for UHS facilities that utilize porous reservoirs, based on the current state-of-knowledge about H 2 behavior in the subsurface. The workflow sequentially addresses all aspects of UHS project development, including the identification of H 2 sources and users, site ranking and down-selection, geologic and reservoir-engineering characterization, reservoir design, testing, risk management, commissioning, operations, and monitoring for a UHS facility. The goal is to enable UHS facilities to be developed in an efficient and timely manner, while carefully managing project risks. This workflow is similar to that which has been developed for UGS facilities (see Figure 1 of API, 2022), with the addition of tasks and subtasks specific to H 2 and UHS. The project-development workflow is broken down into three major stages: (1) define the H 2 use case; (2) rank, down-select, and characterize potential, candidate UHS sites; and (3) reservoir design, integrity testing, risk assessment, commissioning, operations, and monitoring for selected UHS sites. Each major stage is further broken down into tasks and subtasks, which are described at a high level. This report also provides more detailed descriptions of all tasks and subtasks that involve reservoir analysis and testing.

08 HYDROGEN↗
DOE OSTI2023

Assessing the potential of composite confining systems for secure and long-term CO 2 retention in geosequestration

A potential geologic target for CO 2 storage should ensure secure containment of injected CO 2 . Traditionally, this objective has been achieved by targeting reservoirs with overlying seals-regionally extensive, low permeability units that have been proven capable of retaining buoyant fluid accumulations over geologic time. However, considering that the amount of CO 2 is limited by a decadal injection period, vertical migration of CO 2 can be effectively halted by a composite system of discontinuous shale/silt/mudstone barriers in bedded sedimentary rocks. Here, we studied the impact of depositional architectures in a composite confining system on CO 2 migration and confinement at reservoir scale. We stochastically generated lithologically heterogeneous reservoir models containing discontinuous barriers consistent with statistical distributions of net-sand-to-gross-shale ratio (NTG) and horizontal correlation lengths derived from well log data and observations of producing hydrocarbon fields in Southern Louisiana. We then performed an extensive suite of reservoir simulations of CO 2 injection and post-injection to evaluate the sensitivity of CO 2 plume migration and pressure response of the composite system to a series of geologic and fluid parameters including the lateral continuity of barriers, NTG, permeability anisotropy within the sand body, and capillary pressure contrast between the sand and shale facies. The results indicate that lateral continuity of barriers and NTG are the dominant controls on CO 2 plume geometry and pressure build-up in the reservoir, while the impact of NTG is particularly pronounced. The significance of intraformational barriers becomes apparent as they facilitate the local capillary trapping of CO 2 . Those barriers improve the pore space occupancy by promoting a more dispersed shape of the plume and ultimately retard the buoyancy-driven upward migration of the plume post injection.

58 GEOSCIENCES↗
DOE OSTI2022

Determining the Adsorption Energetics of 2,3-Butanediol on RuO 2 (110): Coupling First-Principles Calculations With Global Optimizers

As climate change continues to pose a threat to the Earth due to the disrupted carbon cycles and fossil fuel resources remain finite, new sources of sustainable hydrocarbons must be explored. 2,3-butanediol is a potential source to produce butene because of its sustainability as a biomass-derived sugar. Butene is an attractive product because it can be used as a precursor to jet fuel, categorizing this work in the alcohol-to-jet pathway. While studies have explored the conversion of 2,3-butanediol to butene, little is understood about the fundamental reaction itself. We quantify the energetics for three pathways that were reported in the literature in the absence of a catalyst. One of these pathways forms a 1,3-butadiene intermediate, which is a highly exothermic process and thus is unlikely to occur since 2,3-butanediol likely gets thermodynamically trapped at this intermediate. We further determined the corresponding energetics of 2,3-butanediol adsorption on an ensemble of predetermined binding sites when it interacts with a defect-free stoichiometric RuO 2 (110) surface. Within this ensemble of adsorption sites, the most favorable site has 2,3-butanediol covering a Ru 5–coordinated cation. This approach is compared to that obtained using the global optimization algorithm as implemented in the Northwest Potential Energy Surface Search Engine. When using such a global optimization algorithm, we determined a more favorable ground-state structure that was missed during the manual adsorption site testing, with an adsorption energy of -2.61 eV as compared to -2.34 eV when using the ensemble-based approach. We hypothesize that the dehydration reaction requires a stronger chemical bond, which could necessitate the formation of oxygen vacancies. As such, this study has taken the first step toward the utilization of a global optimization algorithm for the rational design of Ru-based catalysts toward the formation of butene from sustainable resources.

09 BIOMASS FUELS↗
DOE OSTI2020

Vibrational Bands of the 2-Butyn-1-yl Radical

This article reports the spectroscopic signature of the 2-butyn-1-yl radical. The radical is an isomer of C 4 H 5 and is is likely to be significant to reactions that occur during combustion of fuels, as well as reactions in extraterrestrial environments. In this work, the radical was formed by heating a mixture of 1-bromo-2-butyne and argon to 800 K in a pulsed, microtubular reactor. The resultant radicals and other trace products were trapped in a low-temperature argon matrix. Fourier-transform infrared spectroscopy was used to record seven vibrational bands of the 2-butyn-1-yl radical. In conclusion, the experimentally observed frequencies and intensities of the seven vibrational bands were found to be consistent with computational predictions from the literature and also new calculations done in this work.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Two-Phase Fluid Flow Properties of Rough Fractures With Heterogeneous Wettability: Analysis With Lattice Boltzmann Simulations

Fractures are conduits for fluid flow in low-permeability geological formations. Multiphase flow properties of fractures are important in natural processes and in engineering applications such as the evaluation of the sealing capacity of caprocks and productivity of hydrocarbon-bearing tight rocks. Investigations of flow and transport through fractures typically focus on the effects of fracture geometric and mechanical factors such as aperture, roughness, and compressibility. The wettability of the fracture surfaces and its influence on microscale interfacial phenomena and macroscale effective transport properties are seldom studied. In this study, we investigated the effect of heterogeneous wetting properties on the displacement of water by supercritical CO2 through a series of lattice Boltzmann method simulations. The results show the evolution of the CO2 plume within a fracture is controlled by both the roughness of the aperture field and the wetting distribution. We combined these factors into a capillary pressure map that can be related to the macroscopic flow behavior of the fracture. We observed that heterogeneous wetting distributions promote the residual trapping of water where lower capillary pressures allowed for isolated water pockets in higher capillary pressure zones. Analysis of fracture unsteady relative permeability shows the effect of wetting on permeability evolution and provides support for the viscous-coupling relative permeability model. Finally, analysis of the steady-state relative permeability and saturation demonstrates a strong correlation between permeability and the standard deviation of the capillary pressure field. Thus, characterizing the distribution of wetting properties of fractures is crucial to understanding multiphase fracture flow and transport properties.

58 GEOSCIENCES↗
DOE OSTI2026

Transformation of CeO 2 Nanoparticles into Atomically Dispersed Ce Cations Leads to Enhanced Reactivity for Automotive Emissions Control

Nanosized cerium oxide (CeO 2 ) has been extensively used as the oxygen storage component in automotive emission control systems. However, the possible influence of atomically dispersed Ce in these catalysts has not been recognized. Here, in this study, we demonstrate the controllable transformation of ceria nanoparticles into isolated cerium cations on γ-Al 2 O 3 via reductive atom trapping in 10% H 2 at 800 °C, achieving over half-monolayer coverage. Dispersed Ce 1 ions anchored by surface penta- and octa-coordinated Al sites exhibit outstanding thermal stability in air up to 500 °C, enabling further loading of active metals with well-defined catalyst structures. With this strategy, supported single-atom Rh 1 surrounded by dispersed Ce 1 is confirmed to exhibit much superior performance to Rh 1 on bare Al 2 O 3 or nanocrystalline CeO 2 in catalyzing NO reduction by CO, exhibiting a striking one-order-of-magnitude increase in activity. Dispersed Ce 1 exhibits greatly enhanced oxygen transfer capability compared to ceria nanoparticles and introduces a modified reaction mechanism that involves an adjacent Rh 1 –Ce 1 motif, resulting in a greatly decreased activation barrier (from 192 to 96 kJ/mol). The reactivity enhancements are also seen with Ce 1 -promoted Pt nanoparticles for oxidation of CO and hydrocarbons.

Jiang, Dong [Washington State Univ., Pullman, WA (↗
DOE OSTI2021

Structure and Reactivity of a High-Spin, Nonheme Iron(III)- Superoxo Complex Supported by Phosphinimide Ligands

Nonheme iron oxygenases utilize dioxygen to accomplish challenging chemical oxidations. Additionally, a further understanding of the Fe-O 2 intermediates implicated in these processes is challenged by their highly transient nature. To that end, we have developed a ligand platform featuring phosphinimide donors intended to stabilize oxidized, high-spin iron complexes. O 2 exposure of single crystals of a three-coordinate Fe(II) complex of this framework allowed for in crystallo trapping of a terminally bound Fe-O 2 complex suitable for XRD characterization. Spectroscopic and computational studies of this species support a high-spin Fe(III) center antiferromagnetically coupled to a superoxide ligand, similar to that proposed for numerous nonheme iron oxygenases. In addition to the apparent stability of this synthetic Fe-O 2 complex, its ability to engage in a range of stoichiometric and catalytic oxidation processes demonstrates that this iron-phosphinimide system is primed for development in modeling oxidizing bioinorganic intermediates and green oxidation chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The Impact of Carotenoid Energy Levels on the Exciton Dynamics and Singlet–Triplet Annihilation in Isolated Bacterial Light-Harvesting 2 Complexes

The light-harvesting 2 (LH2) complex of purple phototrophic bacteria plays a critical role in absorbing solar energy and distributing the excitation energy. Exciton dynamics within LH2 complexes are controlled by the structural arrangement and energy levels of the bacteriochlorophyll (BChl) and carotenoid (Car) pigments. However, there is still debate over the competing light-harvesting versus energy-dissipation pathways. In this work, we compared five variants of the LH2 complex from genetically modified strains of Rhodobacter sphaeroides, all containing the same BChls but different Cars with increasing conjugation: zeta-carotene (N = 7; LH2 Zeta ), neurosporene (N = 9; LH2 Neu ), spheroidene (N = 10; LH2 Spher ), lycopene (N = 11; LH2 Lyco ), and spirilloxanthin (N = 13; LH2 Spir ). Absorption measurements confirmed that the Car excited-state energy decreased with increasing conjugation. Similarly, fluorescence spectra showed that the B850 BChl emission peak had an increasing red shift from LH2 Zeta →(LH2 Neu /LH2 Spher )→LH2 Lyco →LH2 Spir . In contrast, time-resolved fluorescence and ultrafast transient absorption (fs-TA) revealed similar excited-state lifetimes (∼1 ns) for all complexes except LH2 Spir (∼0.7 ns). From fs-TA analysis, an additional ∼7 ps nonradiative dissipation step from B850 BChl was observed for LH2 Zeta . Further, singlet− singlet and singlet−triplet annihilation studies showed a ∼50% average fluorescence lifetime reduction in LH2Zeta at high laser power and high repetition rate, compared to ∼10−15% reductions in LH2 Neu /LH2 Spher /LH2 Lyco and minimal lifetime change in LH2 Spir . In LH2 Zeta , the fastest decay component (<50 ps) became prominent at high repetition rates, consistent with strong singlet−triplet annihilation. Nanosecond TA measurements revealed long-lived (>40 μs) BChl triplet states in LH2 Zeta and signs of damage caused by singlet oxygen, whereas other LH2s showed faster triplet quenching (∼18 ns) by Cars. These findings highlight a key design principle of LH2 complexes: the Car triplet energy must be significantly lower than the BChl triplet energy to efficiently quench BChl triplets that otherwise act as potent “trap states,” causing exciton annihilation in laser-based experiments or photodamage in native membranes.

Absorption↗
DOE OSTI2021

Maximized Hole Trapping in a Polystyrene Transistor Dielectric from a Highly Branched Iminobis(aminoarene) Side Chain

We synthesized highly branched and electron donating side chain subunits and attached them to polystyrene (PS) used as a dielectric layer in a pentacene field effect transistor. The influence of these groups on dielectric function, charge retention and threshold voltage shifts (ΔV th ) depending on their positions in dielectric multilayers was determined. We compared the observations made on an N-perphenylated iminobisaniline side chain with those from the same side chains modified with ZnO nanoparticles and with an adduct formed from tetracyanoethylene (TCNE). We also synthesized an analogue in which six methoxy groups are present instead of two amine nitrogens. At 6 mol % side chain, hopping transport was sufficient to cause shorting of the gate, while at 2 mol %, charge trapping was observable as transistor threshold voltage shifts (ΔV th ). Here, we created three types of devices: with the substituted PS layer as single layer dielectric, on top of a crosslinked PS layer but in contact with the pentacene (bilayers), and sandwiched between two PS layers in trilayers. Particularly large bias stress effects and ΔV th , larger than the hexamethoxy and previously studied dimethoxy analogs, were observed in the second case and the effects increased with the increasing electron donating properties of the modified side chains. The highest ΔV th was consistent with a majority of the side chains stabilizing trapped charge. Trilayer devices showed decreased charge storage capability compared to previous work in which we used less donating side chains but in higher concentrations. The ZnO and TCNE modifications resulted in slightly more and less negative ΔV th , respectively, when the side chain polystyrene was not in contact with the pentacene and isolated from the gate electrode. The results indicate a likely maximum combination of molecular charge stabilizing activity and side chain concentration that still allows gate dielectric function.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Geochemical advances in Arctic Alaska oil typing – North Slope oil correlation and charge history

The Arctic Alaska petroleum province is geologically and geochemically complex. Mixed hydrocarbon charge from multiple source rocks and/or levels of thermal maturity is common within an individual oil pool. Biomarker and chemometric statistical analyses were used to correlate twenty-nine oils to five oil families derived from: (1) Triassic Shublik Formation (calcareous organofacies), (2) Triassic Shublik Formation (shaly organofacies), (3) Jurassic Kingak Shale, (4) Cretaceous shale (pebble shale unit and Hue Shale), and (5) Paleogene shale (Canning Formation). Age-diagnostic and source-related oil biomarker parameters establish clear genetic relationships between the normal oil-window components and their putative source designations. However, application of diamondoid analyses reveals mixed-oil accumulations with postmature charge contributions (diamondoid-rich and biomarker-poor) in many oils. Most sampled reservoirs contain a predominant charge derived from a single oil-window source plus a minor contribution from one or more higher maturity source(s). Variations in source organofacies also are recognized in the Shublik, Kingak, and Cretaceous oil families. In some cases, oils from multiple pools within a single field display relatively homogeneous geochemical profiles, suggesting a common source and migration pathway. For example, oil from the significant Pikka discovery is inferred to originate mainly from the calcareous Shublik Formation. In other cases, variability among oils from multiple pools within a single field (e.g., Milne Point, Colville River, and Northstar) likely indicates a more complex source, migration, and charge history. The results of this study may be useful for anticipating the composition of oil charge in stratigraphic traps with low-permeability sandstone reservoirs, where oil gravity and other chemical parameters may influence economic viability.

58 GEOSCIENCES↗