Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hunting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Cascaded Control for Building HVAC Systems in Practice

Actuator hunting is a widespread and often neglected problem in the HVAC field. Hunting is typically characterized by sustained or intermittent oscillations, and can result in decreased efficiency, increased actuator wear, and poor setpoint tracking. Cascaded control loops have been shown to effectively linearize system dynamics and reduce the prevalence of hunting. This paper details the implementation of cascaded control architectures for Air Handling Unit chilled water valves at three university campus buildings. A framework for implementation the control in existing Building Automation software is developed that requires only a single line of additional code. Results gathered for more than a year show that cascaded control not only eliminates hunting in control loops with documented hunting issues, but provides better tracking and more consistent performance during all seasons. A discussion of efficiency losses due to hunting behavior is presented and illustrated with comparative data. Furthermore, an analysis of cost savings from implementing cascaded chilled water valve control is presented. Field tests show 2.2–4.4% energy savings, with additional potential savings from reduced operational costs (i.e., maintenance and controller retuning).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Search for ultralight dark matter in the SuperMAG high-fidelity dataset

Ultralight dark matter, such as kinetically mixed dark-photon dark matter (DPDM) or axion-like-particle dark matter (axion DM), can source an oscillating magnetic-field signal at Earth’s surface. Previous work searched for this signal in a publicly available dataset of global magnetometer measurements maintained by the SuperMAG collaboration. This “low-fidelity” dataset reported measurements with a 1-min time resolution, allowing the search to set leading direct constraints on DPDM and axion DM with Compton frequencies f DM ≤ 1 / ( 1 min ) (corresponding to masses m DM ≤ 7 × 10 − 17 eV ). More recently, a dedicated experiment undertaken by the SNIPE Hunt collaboration has also searched for this same signal at higher frequencies f DM ≥ 0.5 Hz (or m DM ≥ 2 × 10 − 15 eV ). In this work, we search for this signal of ultralight DM in the SuperMAG “high-fidelity” dataset, which features a 1-sec time resolution, allowing us to probe the gap in parameter space between the low-fidelity dataset and the SNIPE Hunt experiment. The high-fidelity dataset exhibits lower geomagnetic noise than the low-fidelity dataset and features more data than the SNIPE Hunt experiment, making it a powerful probe of ultralight DM. Our search finds no robust DPDM or axion DM candidates. We set constraints on DPDM and axion DM parameter space for 10 − 3 Hz ≤ f DM ≤ 0.98 Hz (or 4 × 10 − 18 eV ≤ m DM ≤ 4 × 10 − 15 eV ). Our results are the leading direct constraints on both DPDM and axion DM in this mass range, and our DPDM constraint surpasses the leading astrophysical constraint in a narrow range around m A ′ ≈ 2 × 10 − 15 eV . Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Deadband Voltage Control and Power Buffering for Extreme Fast Charging Station

Voltage fluctuation is one of the most common challenges that electric vehicle charging station (EVCS) may introduce to the power grid. Local reactive power compensation (Q-compensation) capability of bi-directional electric vehicle (EV) chargers can mitigate the steady-state voltage violations caused by the EV charging itself or changes in the neighboring loads. Power buffering, using energy storage system (ESS), can be utilized to address the voltage transients (sags and swells) as a result of EV charging at the EVCS. To address PI controller’s ‘hunting’ issue, this paper proposes a Q-sign triggered deadband voltage control (V-control) method at the point of common coupling (PCC). In addition, to ensure the ramp rate of EV charging is within the allowable limits set forth by the grid code, a ramp rate control is proposed that uses the ESS as a ‘power buffer’. Lastly, different from most reported work in the literature where no explicit limit of the power electronic converters (PECs) is considered, this work considers a reasonable apparent power capacity limit of the PECs when achieving the V-control. This limit also affects the amount of active power that can be obtained from the grid, and subsequently may require ESS to function as ‘load sharing’ device to provide supplemental active power to satisfy EV load. A case study simulated in MATLAB (interfaced with PLECS) is presented to demonstrate the effectiveness of the proposed approaches for EVCS operation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Test of model of equivalence of tree height growth and transpiration rates in percolation-based phenomenology for root-soil interaction

We recently introduced a phenomenological model to represent root-soil interactions that accounts for variability in tree growth on local scales and within species (Hunt et al., 2020). Here, using publicly available datasets, we examine the developed model to provide additional empirical evidence, which also gives novel insight into two particular tree species, Eucalyptus regnans and Eucalyptus sieberri. In particular, we discovered two novel aspects of the model: a power-law time dependence with a different power-law exponent than usually heretofore applied, and apparently a direct equivalence of results for transpiration and growth rates. Also, although our original expectation was that growth and transpiration were merely proportional, comparison of the entire BAAD data set (Falster et al., 2015) for tree height with our model (Hunt et al., 2020; Fig. 1) already suggested approximate equality of these disparate measurements (volume/area, height). In this present manuscript we find further evidence for equivalence of the two measurements and provide additional theoretical basis for a model assumption regarding constancy of sap flow rates.

54 ENVIRONMENTAL SCIENCES↗

Stakeholder Support for Wildlife Conservation Funding Policies

State wildlife management agencies in the United States have depended on a “user-pay” funding model for conservation efforts that relies on revenue from hunting license sales and a federal excise tax on firearms, ammunition, and archery equipment. Declines in hunting participation, however, jeopardize sustainability of the current funding model. Ensuring support among stakeholders for wildlife management and conservation may require expanding sources of funding and incorporating the perspectives and values of a diversifying constituency into decision making processes. We used a web-based survey of wildlife-associated recreationists in Michigan, USA to evaluate support for a range of conservation funding policies. Respondents self-identified primarily as hunters (n = 2,558) or wildlife watchers (n = 942). We used binary logistic regression to evaluate support for four conservation funding policy options: state sales tax, lottery proceeds, extractive industry revenue, and a user-based tax on outdoor gear (i.e., “backpack tax”). Determinants of support varied by type of policy and stakeholder characteristics. We found no statistically significant differences between hunters and wildlife watchers in their support for conservation funding policies when accounting for other variables such as wildlife value orientations, engagement in stewardship behaviors, age, and gender. The industry-based policy achieved the greatest level of approval, while the backpack tax had the lowest. Respondents were mixed in their support of the sales tax and lottery proceeds options. Cluster analysis revealed three homogenous groups related to conservation funding policies: “strong support,” “mixed/opposed,” and “anti-backpack tax.” Clusters differed in their support for conservation funding policies and on psychological and demographic variables. The “strong support” and “anti-backpack tax” groups differed in their levels of stewardship engagement, knowledge of conservation funding mechanisms, and support for the backpack tax option. The “mixed-opposed” group tended to be older, less educated, and less likely to be a member of a conservation organization. Results suggest support for conservation funding differs by policy type and social and psychological characteristics of stakeholders. Based on differences in policy support revealed in this study, we suggest a multi-tiered approach to funding conservation and building on support among wildlife stakeholders to mitigate the looming funding crisis for state wildlife agencies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

RACEE Energy Efficiency Implementation for Holy Cross, Alaska (Final Report)

The Deg Hit’an Athabascan village of Holy Cross is located along the Ghost Creek Slough bank of the Yukon River. Holy Cross is home to almost 170 people who are accustomed to both the advantages and disadvantages of living off the road system - the nearest major road is some 300 miles to the east. On one hand, Holy Cross residents have greater access to practicing traditional activities like subsistence hunting and fishing. Families in the area have fished, hunted, and gathered food together for many generations and the land is imbued with this special history. But compared to Alaskans living on the road system, the residents of Holy Cross pay higher prices for basic necessities since goods are transported via air service and seasonal barge shipments. Holy Cross residents also accumulate higher energy costs, as diesel fuel is the primary fuel source for heating and lighting and costs over $\$6$ per gallon. Affording these high living costs becomes a barrier for Holy Cross residents who want to stay in the village or participate in subsistence activities requiring transportation by boat or ATV.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Evaluating Movement Patterns of the Rattlesnake Hills Elk Herd on Hanford for Calendar Years 2019-2024

Biologists first documented elk on the Hanford Site in 1972; since then, the elk herd known as the Rattlesnake Hills Elk Herd (RHEH) has grown substantially (PNNL-13331, Population Characteristics and Seasonal Movement Patterns of the Rattlesnake Hills Elk Herd: Status Report 2000). Through the 1990s, the core range of the RHEH was focused on the portion of the Hanford Reach National Monument known as the Fitzner-Eberhardt Arid Lands Ecology (ALE) Reserve. More recently, larger numbers of elk have been occupying the U.S. Department of Energy (DOE), Hanford Field Office (HFO), formerly the DOE, Richland Operations Office managed portion- of the Hanford Site, known as central Hanford (Figure 1-1). This began with bachelor groups of bulls occupying the site intermittently, and the herd has grown to resident herds, including bulls, cows, and calves. The Washington Department of Fish and Wildlife (WDFW) established a target herd size for the RHEH of less than 350 animals to minimize damages on adjacent private agricultural lands (Washington State Elk Herd Plan–Yakima Elk Herd [WDFW 2002]). Attempts to control the RHEH population through hunting on private lands and a relocation effort during 2000 have failed to limit growth of the population toward the WDFW target, and the herd exceeds 1,600 according to recent counts (PNNL-13331; DOE/RL- 2023-20, Hanford Annual Site Environmental Report for Calendar Year 2022). Although elk are present on central Hanford year-round, they continue to move between areas offsite, the ALE Reserve, and central Hanford throughout the year, and it is these movements that result in many of the elk-vehicle collisions (EVC) that occur along Hanford Site roads and on the Washington State highways bordering the site. In addition, changes in management strategies on the ALE Reserve, including recent and potential future tribal elk hunts, may alter herd behavior and result in additional animals transiting onto and off central Hanford.

54 ENVIRONMENTAL SCIENCES↗

Human fatalities resulting from wild pig attacks worldwide – 2000-2019

Although reported to be rare, human fatalities resulting from wild pig (Sus scrofa) attacks do occur. Toward a better understanding of patterns in fatal wild pig attacks, we synthesized worldwide reports of wild pig attacks on humans between 2000 and 2019. We documented 163 separate reports of fatal wild pig attacks that resulted in 172 human deaths. On average, 8.6 human deaths occurred annually due to wild pig attacks during those 2 decades. The majority of fatal attacks resulted in a single human death; however, there were 6 cases in which an individual fatal attack resulted in 2–4 human deaths. These fatal wild pig attacks occurred in 29 countries, mostly within the wild pig’s native global range. Fatal attacks primarily occurred under non-hunting circumstances and involved seemingly unprovoked wild pigs. Under hunting circumstances, fatal attacks primarily involved provoked or wounded wild pigs. Fatal attacks typically involved a solitary wild pig, with 12% involving multiple pigs. Solitary pigs involved in fatal attacks were typically large boars that in most attacks exhibited defensive behaviors, although we discovered 7 attacks during which the pig’s behaviors appeared to be predatory. Three fatal attacks were initially investigated as homicides. Overall, victims of fatal wild pig attacks were between 3 and 85 years old and were traveling on foot when the attack occurred. The majority of victims of fatal attacks were adult (20–59 years old), male, traveling on foot, and working in isolation. Among all fatal attacks, 50% identified the cause of death, which included exsanguination/hemorrhagic shock, severe injury, heart attack, craniocerebral injury, severe injury/disembowelment/intestinal prolapse, and toxemia/septicemia. Fatal wild pig attacks occurred primarily in rural areas, with fatal attacks 390% more likely to occur in rural areas with large populations and at least 45% forested and agricultural cover. The greater the rural human population size within a country is, the greater the number of fatal wild pig attacks.

60 APPLIED LIFE SCIENCES↗

Influence of weather on gobbling activity of male wild turkeys

Gobbling activity of Eastern wild turkeys (Meleagris gallopavo silvestris; hereafter, turkeys) has been widely studied, focusing on drivers of daily variation. Weather variables are widely believed to influence gobbling activity, but results across studies are contradictory and often equivocal, leading to uncertainty in the relative contribution of weather variables to daily fluctuations in gobbling activity. Previous works relied on road-based auditory surveys to collect gobbling data, which limits data consistency, duration, and quantity due to logistical difficulties associated with human observers and restricted sampling frames. Development of new methods using autonomous recording units (ARUs) allows researchers to collect continuous data in more locations for longer periods of time, providing the opportunity to delve into factors influencing daily gobbling activity. We used ARUs from 1 March to 31 May to detail gobbling activity across multiple study sites in the southeastern United States during 2014–2018. We used state-space modeling to investigate the effects of weather variables on daily gobbling activity. Our findings suggest rainfall, greater wind speeds, and greater temperatures negatively affected gobbling activity, whereas increasing barometric pressure positively affected gobbling activity. Therefore, when using daily gobbling activity to make inferences relative to gobbling chronology, reproductive phenology, and hunting season frameworks, stakeholders should recognize and consider the potential influences of extended periods of inclement weather.

60 APPLIED LIFE SCIENCES↗

Integrating Mercury Concentrations in American Alligators ( Alligator mississippiensis ) with Hunter Consumption Surveys to Estimate Exposure Risk

Mercury is a naturally occurring element but is also considered a widespread contaminant due to global anthropogenic activity. Even in moderate amounts, mercury (Hg) is an established neurotoxin and is associated with a range of adverse outcomes both in humans and wildlife. Humans in the United States are most commonly exposed to Hg through contaminated food or drinking water, and the consumption of game species, particularly those occupying higher trophic levels, has the potential to expose hunters to high concentrations of Hg. In the present study, we determined Hg concentrations in tail muscle and blood from American alligators (Alligator mississippiensis) inhabiting a region (Savannah River Site, SC, USA) with known Hg contamination. We then integrated these data with alligator harvest records and previously published surveys of alligator meat consumption patterns to estimate potential exposure risk. We found that the average Hg concentrations in tail muscle (1.34 mg/kg, wet wt) from sampled alligators exceeded the recommended threshold for Hg exposure based on the World Health Organization's guidelines (0.5mg/kg, wet wt). In addition, based on regional consumption patterns reported for both adults and children, we estimated Hg exposures (x¯ Adult = 0.419 μg/kg/day, x¯ Child = 2.24 μg/kg/day) occurring well above the US Environmental Protection Agency methylmercury reference dose of 0.1 μg/kg/day. Although the two reservoirs sampled in the present study are not currently open to alligator hunting, they are connected to waters that are publicly accessible, and the extent of alligator mobility across these sites is not known. Together, the findings reported in the present study further demonstrate the need for active monitoring of Hg concentrations in game species, which can convey substantial exposure risks to the public.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessing whole-sounder removal versus traditional control for reducing invasive wild pig ( Sus scrofa ) populations

Trapping is commonly used as the primary management tool in attempts to reduce invasive wild pigs (Sus scrofa), but traditional trapping techniques are often ineffective. However, recently developed traps permit the capture of entire social groups (sounders) of wild pigs, and the strategy of whole-sounder removal may achieve more effective control. Our objective was to experimentally compare traditional control (TC; primarily traditional trapping, but including hunting with dogs, and opportunistic shooting) and whole-sounder removal (WSR) strategies by assessing density reduction and removal rate after 1 and 2 years of treatment. After 1 year of trapping, average wild pig density on WSR units declined 53% and remained stable after the second year, whereas on TC units, pig density did not differ after trapping, although it declined 33% and remained stable after the second year of trapping. The median removal rate (percentage of uniquely marked pigs present at the beginning of each year that were removed) was 42.5% for WSR units and 0.0% for TC units during 2018 and were 29.6% from WSR units and 5.3% from TC units during 2019. WSR removal was more effective at reducing wild pig density than TC, but factors such as previous exposure of this population to traditional traps and the lack of barriers to recolonization from surrounding areas may have reduced WSR efficacy. WSR can effectively reduce wild pig density to a greater extent than TC, but managers should recognize the additional time and expense necessary for implementation.

Sus scrofa↗

Magic zeroes and hidden symmetries

Selection rules arising from accidental or broken symmetries may be sufficiently obscure that their agency is hidden, leading to the appearance of “magic zeroes” — quantities that are suppressed without apparent recourse to a symmetry explanation. Magic zeroes and their corresponding hidden symmetries may shed new light on parametric hierarchies in the Standard Model and beyond. We identify the hidden symmetry responsible for a recently-discovered magic zero, the vanishing of the putative leading contribution to the anomalous dipole moments of the muon upon integrating out weak doublet and singlet vector-like fermions. Some of the tools involved — spurion analysis leveraging discrete symmetries of the free theory, field redefinitions, spectator fields, and non-supersymmetric non-renormalization theorems — may prove useful in the hunt for new magic zeroes and their hidden symmetries.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SHAPER: can you hear the shape of a jet?

The identification of interesting substructures within jets is an important tool for searching for new physics and probing the Standard Model at colliders. Many of these substructure tools have previously been shown to take the form of optimal transport problems, in particular the Energy Mover’s Distance (EMD). In this work, we show that the EMD is in fact the natural structure for comparing collider events, which accounts for its recent success in understanding event and jet substructure. We then present a Shape Hunting Algorithm using Parameterized Energy Reconstruction (SHAPER), which is a general framework for defining and computing shape-based observables. SHAPER generalizes N-jettiness from point clusters to any extended, parametrizable shape. This is accomplished by efficiently minimizing the EMD between events and parameterized manifolds of energy flows representing idealized shapes, implemented using the dual-potential Sinkhorn approximation of the Wasserstein metric. We show how the geometric language of observables as manifolds can be used to define novel observables with built-in infrared-and-collinear safety. We demonstrate the efficacy of the SHAPER framework by performing empirical jet substructure studies using several examples of new shape-based observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Non-Gaussianities in collider energy flux

The microscopic dynamics of particle collisions is imprinted into the statistical properties of asymptotic energy flux, much like the dynamics of inflation is imprinted into the cosmic microwave background. This energy flux is characterized by correlation functions < E(n → 1 )…E(n → k ) > of energy flow operators E(n → ). There has been significant recent progress in studying energy flux, including the calculation of multi-point correlation functions and their direct measurement inside high-energy jets at the Large Hadron Collider (LHC). In this paper, we build on these advances by defining a notion of “celestial non-gaussianity” as a ratio of the three-point function to a product of two-point functions. We show that this celestial non-gaussianity is under perturbative control within jets at the LHC, allowing us to cleanly access the non-gaussian interactions of quarks and gluons. We find good agreement between perturbative calculations of the non-gaussianity and a charged-particle-based analysis using CMS Open Data, and we observe a strong non-gaussianity peaked in the “flattened triangle” regime. The ability to robustly study three-point correlations is a significant step in advancing our understanding of jet substructure at the LHC. We anticipate that the celestial non-gaussianity, and its generalizations, will play an important role in the development of higher-order parton showers simulations and in the hunt for ever more subtle signals of potential new physics within jets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sensitivity of cellular automata grain structure predictions for high solidification rates

Understanding as-solidified grain structure development during constrained (G 0) alloy solidification conditions is a necessary component of understanding the larger process-microstructure relationships during additive manufacturing (AM) processing. This study applies a cellular automata (CA) model, for static solidification velocities and thermal gradients on the order of those expected in AM melt pools, to investigate grain shape development across ranges of input parameters governing temperature field evolution, nucleation, and growth. Variation in nucleated grain shape from columnar to equiaxed as a function of thermal gradient and nucleation density is modeled with CA and verified against the established transition model of Hunt and Gaumann. Furthermore, while thermal conditions and nucleation density are shown to have the largest roles on microstructure development, the sensitivity of grain structure was very unevenly distributed across parameter space. In particular, it was found that microstructure is very sensitive to mean nucleation undercooling and the interfacial response function in process space regimes near grain structure transitions, but entirely controlled by a combination of thermal gradient, solidification velocity, and nucleation density away from such transitions. The understanding of grain shape sensitivity obtained through CA modeling, particularly at large thermal gradient and nucleation density, will be necessary for accurate microstructure prediction during the extreme processing conditions and large input parameter uncertainty common to AM.

36 MATERIALS SCIENCE↗

Magnetic anisotropy in two-orbital models

Motivated by the recent first-principle discovery of giant perpendicular magnetic anisotropy (PMA) in Fe/III–V nitride thin films, we theoretically study magnetic crystalline anisotropy(MCA) in a series of lattices with trigonal symmetry. Due to the trigonal crystal field, MCA in these lattices is dominated by first-order perturbation of the spin–orbit coupling (SOC) in the atomic limit, instead of second-order in conventional transition metal materials. In particular, the proportionality between MCA and SOC is robust in Kagome and pyrochlore lattices due to the flat bands therein. While in triangle lattice the second-order relation is restored under the bandwidth effect. Furthermore, these findings give rise to a new understanding of magnetic anisotropy and provide a guide for the future hunting of high PMA materials.

36 MATERIALS SCIENCE↗

Characterising the Higgs boson with ATLAS data from the LHC Run-2

The Higgs boson was discovered by the ATLAS and CMS Collaborations in 2012 using data from Run 1 of the Large Hadron Collider (2010 2012). In Run 2 (2015 2018), about 140 fb -1 of proton–proton collisions at a centre-of-mass energy of 13 TeV were collected by the ATLAS experiment. This review presents the most important Run 2 results obtained by the ATLAS Collaboration regarding the properties of the Higgs boson and its interactions with other particles. The performed studies significantly enhance the understanding of the Higgs boson, while hunting for deviations from the predictions of the Standard Model of particle physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Revisiting the validity of eddy viscosity models for predicting airflow over water waves

In this study, we revisit the validity of eddy viscosity models for predicting wave-induced airflow disturbances over ocean surface waves. We first derive a turbulence curvilinear model for the phase-averaged Navier–Stokes equations, extending the work of Cao, Deng & Shen (2020 J. Fluid Mech. 901, A27), by incorporating turbulence stress terms previously neglected in the linearised viscous curvilinear model. To verify our formulation, we perform a priori tests by numerically solving the model using mean wind and turbulence stress profiles from large-eddy simulations (LES) of airflow over waves across various wave ages. Results show that including turbulence stress terms improves wave-induced airflow predictions compared with the previous viscous curvilinear model. We further show that using a standard mixing-length eddy viscosity yields inaccurate predictions at certain wave ages, as it fails to capture wave-induced turbulence, which fundamentally differs from mean shear-driven turbulence. The LES data show that accurate representations of wave-induced stresses require a complex-valued eddy viscosity. The maximum magnitude of this eddy viscosity scales as ∼𝑢 𝜏 ⁢𝜁 𝑖𝑛𝑛𝑒𝑟 , where 𝑢 𝜏 is the friction velocity and 𝜁 𝑖𝑛𝑛𝑒𝑟 is the inner-layer thickness, the height at which the eddy-turnover time matches the wave advection time scale. This scaling aligns with the prediction by Belcher & Hunt (1993 J. Fluid Mech. 251, 109–148). Overall, the findings demonstrate that traditional eddy viscosity models are inadequate for capturing wave-induced turbulence. More sophisticated turbulence models are essential for the accurate prediction of airflow disturbances and form drag in wind–wave interaction models.

16 TIDAL AND WAVE POWER↗