A simple route to prepare supramolecular block copolymers using telechelic polystyrene/polydimethyls
Explore the source record for details and available documents.
Obando, Alejandro Guillen↗
SEARCH · Engineering Papers
Results for “Homopolymers”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Understanding the Influence of Chain Architecture on the Transport Quantities of Polymer Electrolytes with Covalently Bonded Anions
Here, we use a combination of experiments and coarse-grained molecular dynamics simulations to elucidate the structure–property relationships in polymer electrolytes obtained by the copolymerization of poly(vinyl ethylene carbonate─lithium styrene bis(trifluoromethanesulfonyl)imide) or p(VEC-LiSTFSI). Experiments show that the conductivity reduces with increasing anion (i.e., STFSI) fraction on the chain, and the cation transference number (t + ) is found to be dependent on the anion fraction. Furthermore, a significant fraction of unpolymerized VEC monomers are observed. Since it is inherently difficult to experimentally control the chain architecture and the amount of unpolymerized VEC in these systems, we perform coarse-grained molecular dynamics simulations on model polymer systems with different chain architectures to mimic the plausible experimental systems. Specifically, we look at the differences in transference numbers arising from (i) a random copolymer of VEC and STFSI monomers; (ii) a blend of VEC-STFSI copolymer with VEC monomers; and (iii) a ternary blend of the VEC homopolymer, STFSI homopolymers, and VEC monomers. The ternary blend model demonstrates the closest resemblance with the experimental transference numbers and diffusivities. The lithium diffusivity obtained from the coarse-grained models with VEC monomers (plasticizers) is about 1.5 times that of the model without VEC monomers, showing that the plasticizing effect of VEC monomers is modest. We rationalize the experimental observations based on aggregate and cluster analyses obtained from molecular simulations. This work reveals that polymer electrolyte chain architecture and plasticizers can critically influence the transport properties, and these parameters should be considered when designing single ion conducting polymeric electrolytes.
cluster distribution↗
Effect of poly[oligo(ethylene glycol) methyl ether methacrylate] side chain length on the brush swelling behavior in A/B/A–B ternary blends with polystyrene
The phase behavior of ternary blends composed of two homopolymers (A, B) and their corresponding diblock copolymer (A–B) has been widely studied, with emphasis on the volumetrically symmetric isopleth and the formation of bicontinuous microemulsions. However, almost all the previous studies employed linear polymers, and little is known about the impact of polymer architecture on the phase behavior of such ternary blends. Here, in this work, we report the self-assembly of three sets of ternary blends of polystyrene (PS) and poly[oligo(ethylene glycol) methyl ether methacrylate] (POEGMA n ), with different lengths of oligo(ethylene glycol) side chains n. Small-angle X-ray scattering was used to probe the phase behavior at different compositions and temperatures. The order-to-disorder transition temperature was found to be impacted by the side chain length. It was also observed that longer side chains lead to poorer miscibility of homopolymers in the corresponding block, resulting in a more “dry-brush” like swelling behavior.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Structure-property relationships in block copolymers
Block copolymers are a class of relatively new materials which contain long sequences of two (or more) chemically different repeat units. Unlike random copolymers, each segment may retain some properties which are characteristic of its homopolymer. It is well known that most physical blends of two different homopolymers are incompatible on a macro-scale. By contrast most block copolymers display only a microphase (eg. 100-200 A domains) separation. Complete separation is restricted because of a loss in configurational entropy. The latter is due to presence of chemical bond(s) between the segments. Novel physical properties can be obtained because it is possible to prepare any desired combination of rubber-like, glassy, or crystalline blocks. The architecture and sequential arrangement of the segments can strongly influence mechanical behavior.
Mcgrath, J. E.↗
Initial adhesive screening of novel polyamide-imides and their copolymers
Continued interest by the research community in thermally stable, tough, high temperature adhesives has resulted in the investigation by Langley Research Center of two linear aromatic polyamide-imide (PAI) homopolymers and two linear aromatic PAI copolymers. The homopolymers were made with either 3,3'=DABA or 4,4'-DABA and BTDA. The two polymers were prepared with a monomer ratio of 0.75 DABP:0.25 DABA:1.00 BTDA. These aromatic PAIs possess high thermal stability because of intermolecular hydrogen bonding and chain stiffness. Lap shear strength (LSS) was the main criteria used to evaluate the polymers as adhesives. LSS of bonded Ti-6Al-4V was determined at room temperature (RT), 177, 204 and 232 C. The glass transition temperature and the type of bond failure were also determined. The best LSS values of the four adhesive systems investigated were obtained with the PAI copolymer identified in the report as LARC-TPI (25 percent 3,3'-DABA); however, it did not produce LSSs nearly as high as LARC-TPI. The poor flow properties observed appear to be due to a combination of high molecular weight and the increased interchain electronic interactions associated with the amide group.
Donald J Progar↗
Initial evaluation of novel polyamide-imides and their copolymers as adhesives
Continued interest by the research community in thermally stable, tough, high temperature adhesives has resulted in the investigation by Langley Research Center of two linear aromatic polyamide-imide (PAI) homopolymers and two linear aromatic PAI copolymers. The homopolymers were made with either 3,3'=DABA or 4,4'-DABA and BTDA. The two polymers were prepared with a monomer ratio of 0.75 DABP:0.25 DABA:1.00 BTDA. These aromatic PAIs possess high thermal stability because of intermolecular hydrogen bonding and chain stiffness. Lap shear strength (LSS) was the main criteria used to evaluate the polymers as adhesives. LSS of bonded Ti-6Al-4V was determined at room temperature (RT), 177, 204 and 232 C. The glass transition temperature and the type of bond failure were also determined. The best LSS values of the four adhesive systems investigated were obtained with the PAI copolymer identified in the report as LARC-TPI (25 percent 3,3'-DABA); however, it did not produce LSSs nearly as high as LARC-TPI. The poor flow properties observed appear to be due to a combination of high molecular weight and the increased interchain electronic interactions associated with the amide group.
Progar, Donald J.↗
Relative rates for plasma homo- and copolymerizations of olefins in a homologous series of fluorinated ethylenes
It is well known that the rate of plasma polymerization, or deposition rate, of a given monomer depends on various plasma process parameters, e.g., monomer flow rate, pressure, power, frequency (DC, rf or microwave), location of the substrate in the reactor, reactor geometry or configuration, and temperature. In contrast, little work has been done to relate deposition rates to monomer structures for a homologous series of monomers where the rates are obtained under identical plasma process parameters. For the particular series of fluorinated ethylenes (C2HxF4-x; x = 0-4), deposition rates were reported for ethylene (ET), vinyl fluoride, vinylidene fluoride and tetrafluoroethylene (TFE), but for plasma polymerizations carried out under different discharge conditions, e.g., pressure, current density, and electrode temperature. Apparently, relative deposition rates were reported for only two members of that series (ET, x = 4, and TFE, x = 0) for which the plasma polymerizations were conducted under identical conditions. We now present relative deposition rates for both homopolymerizations and copolymerizations of the entire series of fluorinated ethylenes (x = 0-4). Our interest in such rates stems from prior work on the plasma copolymerization of ET and TFE in which it was found that the deposition rates for the plasma copolymers, when plotted versus mol % TFE in the ET/TFE feed stock, followed a concave-downward curve situated above the straight line joining the deposition rates for the plasma homopolymers. This type of plot (observed also for an argon-ET/TFE plasma copolymerization) indicated a positive interaction between ET and TFE such that each monomer apparently "sensitized" the plasma copolymerization of the other. Since the shape of that plot is not altered if mol % TFE is replaced by F/C, the fluorine-to-carbon ratio, this paper aims (1) to show how the relative deposition rates for plasma copolymers drawn from all pairs of monomers in the C2HxF4-x series, as well as the deposition rates for the individual plasma homopolymers, vary with F/C ratios of the monomers or monomer blends, and (2) to see if those rates give rise to a common plot.
NASA Center ARC↗
A comparison of mechanical properties from natural and process-induced interfaces in filament extrusion AM of polymer blends
Polymer blends are commonly tuned for specific applications to achieve desired properties otherwise inaccessible or prohibitively expensive to obtain via homopolymers. The interfacial characteristics of the polymer A-polymer B interface and resultant domain sizes govern key performance properties. Micro- and meso-scale morphology forms through the interplay of surface forces between the polymers and between each polymer and the surrounding atmosphere. Analogously, the layer-layer and road-road interfaces of material extrusion (MEX) additive manufacturing (AM) govern key performance properties of printed parts. This work explores the effect of layer height on the thermomechanical performance of polystyrene (PS)-polycarbonate (PC) blends. Filament is prepared from a 50/50 weight ratio of the two polymers and compared against dual-nozzle printing where every layer alternates between PS or PC homopolymer forming a part with an overall 50/50 polymer ratio. Typical indicators of polymer blend compatibility are also studied.
Chatham, Camden A.↗
Role of Bottlebrush Additives on the Structure of Block Copolymers in the Bulk and Thin Films
Blending block copolymers (BCP) with additives is a useful approach for controlling BCP morphology and properties. In athermal systems, blends of BCPs with polymer additives having very high molecular (M n ) mass generally result in macrophase separation. Bottlebrush polymers, which consist of a linear backbone and grafted side chains, present an interesting alternative where the overall M n of the system can be very large but the low M n side chains may drive miscibility with the BCP. Here, in this study, a bottlebrush with a polynorbornene backbone and polystyrene (PS) side chains is blended with PS-b-poly(methyl methacrylate) (PS-b-PMMA) of varying M n , and the resulting morphologies are examined in both the bulk and thin films. Two different M n of PS-b-PMMA were used in the bulk study, and the analysis of small-angle X-ray scattering data shows that the blends were miscible and lamellar at all concentrations. This deviates from reference series of both low and high M n linear polymer additives, which either showed morphological transitions from lamellae to cylinders (low M n ) or were immiscible at all mass fractions studied (high M n ). The relative molecular mass of the side chain (N SC ) and the corresponding component in the BCP (N A ) dictate the distribution of the bottlebrush throughout the BCP, analogous to BCP/linear blends or grafted nanoparticles in a homopolymer matrix. The studies on thin films show a thickness dependence for bottlebrush mass fractions at or above 0.17, a behavior which may be driven by conformational changes of the bottlebrush upon confinement.
36 MATERIALS SCIENCE↗
Insights into the Thermal Expansion of Amorphous Polymers
Here, we investigated the thermal expansion of amorphous polystyrene (PS) and poly(methyl methacrylate) (PMMA) homopolymers using the temperature dependence of spatial electron-density correlations. The strong and broad X-ray interference maxima arising from inter- and intramolecular correlation distances were distinct, maintaining their shape during the heating of the samples to 250 °C. Three maxima characteristic of electron density correlations between the backbones, substituents along the chain, and repeat-units were observed. A remarkable temperature dependence was identified in the largest correlation distances arising from the intermolecular interactions. Based on the temperature dependence of the correlation distances, the coefficients of molecular expansion were very close to the coefficients of thermal expansion. This study provides a simple yet accurate way to correlate macroscopic volume expansions with the molecular expansion obtained from wide-angle X-ray scattering (WAXS) data.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Automated and High-Throughput Phase Separation Control for Supramolecular Polymer Blends Enabled by Machine Learning
Supramolecular polymer blends (SPBs) offer tunable morphologies that dictate their macroscopic properties, yet their rational design is limited by the absence of predictive structure−morphology models. Here, we introduce a data-driven highthroughput workflow that integrates modular polymer synthesis, robotic formulation, automated morphology characterization, and machine learning (ML) for accelerated SPB discovery. Using a plug-and-play synthetic strategy, 33 hydrogen-bonding endfunctional homopolymers were prepared and orthogonally combined to generate 260 SPBs in 1 day. A fully automated atomic force microscopy (AFM) pipeline enabled systematic imaging, producing 2340 morphology data sets with minimal human intervention. Domain spacings were extracted through complementary imageprocessing methods and used to train ML models. A support vector regression (SVR) model accurately predicted target phase-separation sizes (50, 100, and 150 nm), which were experimentally validated. This work demonstrates the power of coupling high-throughput experimentation with ML to accelerate morphology discovery and provides one of the first large-scale experimental data sets for supramolecular polymer systems.
ML-guided polymer design↗
Dihydroxyterephthalate—A Trojan Horse PET Counit for Facile Chemical Recycling
Abstract Here, low‐energy poly(ethylene terephthalate) (PET) chemical recycling in water: PET copolymers with diethyl 2,5‐dihydroxyterephthalate (DHTE) undergo selective hydrolysis at DHTE sites, autocatalyzed by neighboring group participation, is demonstrated. Liberated oligomeric subchains further hydrolyze until only small molecules remain. Poly(ethylene terephthalate‐ stat ‐2,5‐dihydroxyterephthalate) copolymers were synthesized via melt polycondensation and then hydrolyzed in 150–200 °C water with 0–1 wt% ZnCl 2 , or alternatively in simulated sea water. Degradation progress follows pseudo‐first order kinetics. With increasing DHTE loading, the rate constant increases monotonically while the thermal activation barrier decreases. The depolymerization products are ethylene glycol, terephthalic acid, 2,5‐dihydroxyterephthalic acid, and bis(2‐hydroxyethyl) terephthalate dimer, which could be used to regenerate virgin polymer. Composition‐optimized copolymers show a decrease of nearly 50% in the Arrhenius activation energy, suggesting a 6‐order reduction in depolymerization time under ambient conditions compared to that of PET homopolymer. This study provides new insight to the design of polymers for end‐of‐life while maintaining key properties like service temperature and mechanical properties. Moreover, this chemical recycling procedure is more environmentally friendly compared to traditional approaches since water is the only needed material, which is green, sustainable, and cheap.
36 MATERIALS SCIENCE↗
Mass Spectrometry Imaging of Bio‐oligomer Polydispersity in Plant Tissues by Laser Desorption Ionization from Silicon Nanopost Arrays
Abstract Mass spectrometry imaging (MSI) enables simultaneous spatial mapping for diverse molecules in biological tissues. Matrix‐assisted laser desorption ionization (MALDI) mass spectrometry (MS) has been a mainstream MSI method for a wide range of biomolecules. However, MALDI‐MSI of biological homopolymers used for energy storage and molecular feedstock is limited by, e.g., preferential ionization for certain molecular classes. Matrix‐free nanophotonic ionization from silicon nanopost arrays (NAPAs) is an emerging laser desorption ionization (LDI) platform with ultra‐trace sensitivity and molecular imaging capabilities. Here, we show complementary analysis and MSI of polyhydroxybutyric acid (PHB), polyglutamic acid (PGA), and polysaccharide oligomers in soybean root nodule sections by NAPA‐LDI and MALDI. For PHB, number and weight average molar mass, polydispersity, and oligomer size distributions across the tissue section and in regions of interest were characterized by NAPA‐LDI‐MSI.
Samarah, Laith Z.↗
Hybrid Monomer Design Synergizing Property Trade‐offs in Developing Polymers for Circularity and Performance
Abstract Current search for more sustainable plastics seeks to redesign polymers possessing both chemical recyclability to monomer for a circular plastics economy and desirable performance that can rival or even exceed today's non‐recyclable or hard‐to‐recycle petroleum‐based incumbents. However, within a traditional monomer framework it is challenging to optimize, concurrently , contrasting polymerizability/depolymerizability and recyclability/performance properties. Here, we highlight the emerging hybrid monomer design strategy to develop intrinsically circular polymers with tunable performance properties, aiming to unify desired, but otherwise conflicting, properties in a single monomer. Conceptually, this design hybridizes parent monomer pairs of contrasting, mismatching, or matching properties into offspring monomers that not only unify the above‐described conflicting properties but also radically alter the resultant polymer properties far beyond the limits of what either parent homopolymers or their copolymers can achieve.
Shi, Changxia↗
Hybrid Monomer Design Synergizing Property Trade‐offs in Developing Polymers for Circularity and Performance
Abstract Current search for more sustainable plastics seeks to redesign polymers possessing both chemical recyclability to monomer for a circular plastics economy and desirable performance that can rival or even exceed today's non‐recyclable or hard‐to‐recycle petroleum‐based incumbents. However, within a traditional monomer framework it is challenging to optimize, concurrently , contrasting polymerizability/depolymerizability and recyclability/performance properties. Here, we highlight the emerging hybrid monomer design strategy to develop intrinsically circular polymers with tunable performance properties, aiming to unify desired, but otherwise conflicting, properties in a single monomer. Conceptually, this design hybridizes parent monomer pairs of contrasting, mismatching, or matching properties into offspring monomers that not only unify the above‐described conflicting properties but also radically alter the resultant polymer properties far beyond the limits of what either parent homopolymers or their copolymers can achieve.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Process Variability Effects on Tensile Response in Injection Molded, Fluorinated Thermoplastics
The mechanical properties of fluorinated thermoplastics (i.e., tensile strength and elongation) can vary with changes in injection molding processing parameters. Four fluoropolymers are examined: poly(vinylidene fluoride) (PVDF) and random poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) with three CTFE concentrations. Dog bones were manufactured with various cylinder dwell times and mold cooling times to assess the manufacturing sensitivity to the tensile response. Dwell and cooling times increasingly impact mechanical performance as CTFE concentration increases. Specimens exhibit higher tensile strength as a function of injection order. The first injected specimen exhibits the lowest tensile strength and highest elongation in all copolymers. This trend becomes more pronounced among fluoropolymers with higher CTFE concentration and lower weight-averaged molecular weight. Parallel plate rheology was used to obtain the zero-shear viscosity as a function of material type, process, and injection order. We found that in the copolymers, the first injected sample exhibited a lower zero-shear viscosity than the next, which indicates a lower molecular weight in the first injected specimen. This phenomenon was not presented for the PVDF homopolymer. Copolymer mechanical uncertainties are hypothesized to result from the shorter molecular weight chains extruding out of the specimens' sides as a flash due to higher mobility with CTFE segments.
36 MATERIALS SCIENCE↗
Challenges, progress, and future perspectives for cyanobacterial polyhydroxyalkanoate production
Polyhydroxyalkanoates (PHA) are a promising bio-based alternative to traditional plastics derived from petroleum. Cyanobacteria are photosynthetic organisms that produce PHA from CO 2 and sunlight, which can potentially reduce production costs and environmental footprint in comparison to heterotrophic bacteria cultures because (1) they utilize inorganic carbon sources for growth and (2) they do not require intensive aeration for oxygenation. Moreover, supplementing precursors such as propionate, acetate, valerate, etc., can be used to obtain various copolymers with plastic customizable properties in comparison to the classical homopolymers, such as polyhydroxybutyrate, PHB. This critical review covers the latest advances in PHA production, including recent discoveries in the metabolism interplay between PHA and glycogen production, and new insights into cultivation strategies that enhance PHA accumulation, and purification processes. This review also addresses the challenges and suggests potential solutions for a viable industrial PHAs production process.
59 BASIC BIOLOGICAL SCIENCES↗