Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hexagonal boron nitride”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Thermal relaxation of strain and twist in ferroelectric hexagonal boron nitride moiré interfaces

New properties can arise at van der Waals (vdW) interfaces hosting a moiré pattern generated by interlayer twist and strain. However, achieving precise control of interlayer twist/strain remains an ongoing challenge in vdW heterostructure assembly, and even subtle variation in these structural parameters can create significant changes in the moiré period and emergent properties. Characterizing the rate of interlayer twist/strain relaxation during thermal annealing is critical to establish a thermal budget for vdW heterostructure construction and may provide a route to improve the homogeneity of the interface or to control its final state. Here, we characterize the spatial and temporal dependence of interfacial twist and strain relaxation in marginally-twisted hBN/hBN interfaces heated under conditions relevant to vdW heterostructure assembly and typical sample annealing. We find that the ferroelectric hBN/hBN moiré at very small twist angles (θ ≤ 0.1°) relaxes minimally during annealing in air at typical assembly temperatures of 170°C. However, at 400°C, twist angle relaxes significantly, accompanied by a decrease in spatial uniformity. Uniaxial heterostrain initially increases and then decreases over time, becoming increasingly non-uniform in direction. Structural irregularities such as step edges, contamination bubbles, or contact with the underlying substrate result in local inhomogeneity in the rate of relaxation.

2D materials↗
NASA NTRS2024

Wear and Neutron Shielding Resilience of Titanium-Hexagonal Boron Nitride Coatings Against Extreme Lunar Radiation and Thermal Cycles

Ti6Al4V and Al6061 are aerospace alloys used in lunar structural components and rovers owing to their high specific strength. However, they deteriorate rapidly when subjected to demanding conditions of the lunar environment, such as extreme thermal cycles, solar particle radiation, and abrasive regolith. Cryo-milled powders were employed to deposit hBN-reinforced protective titanium coatings through plasma spray (atmospheric APS and vacuum-VPS) with 2 and 10 vol% of hBN on Ti6Al4V and Al6061 substrates. These coatings were evaluated for durability under extreme lunar-like conditions, including thermal cycling, electron radiation, and synergistic (electron radiation-thermal cycle) exposure. The coatings exhibited radiation-induced hardening, resulting in a substantial increase in their microhardness ~20–40% compared to virgin condition. Bright-field transmission electron microscopy (TEM) analysis reveals the presence of high dislocation densities, black dot defects, and dislocation clusters, providing evidence of the severe impact of synergistic environmental stresses. Ball-on-disk tribological tests were conducted in the presence of JSC-1 A lunar regolith simulant to evaluate the wear performance of coatings. Compared to conventional Ti6Al4V substrate, 50%, 90%, and 70% reductions in wear volume were observed in the Ti/2 vol% hBN coatings in thermal-only, radiation-only, and synergistic environments. Neutron shielding tests indicate that the synergistic coatings offer higher neutron shielding performance by up to 28% compared to virgin coatings, attributed to improved neutron capture by 10B isotopes. Upon a comprehensive assessment and ranking of multiple coatings under varying conditions, the VPS Ti/2 vol% hBN coating emerges as the top choice for protection against extreme radiation and thermal cycles for future lunar explorations.

Boron nitride↗
DOE OSTI2025

Room-temperature high-purity single-photon emission from carbon-doped boron nitride thin films

Hexagonal boron nitride (h-BN) has emerged as a promising platform for generating room temperature single photons exhibiting high brightness and spin-photon entanglement. However, improving emitter purity, stability, and scalability remains a challenge for quantum technologies. Here, we demonstrate highly pure and stable single-photon emitters (SPEs) in h-BN by directly growing carbon-doped, centimeter-scale h-BN thin films using the pulsed laser deposition (PLD) method. These SPEs exhibit room temperature operation with polarized emission, achieving a g (2) (0) value of 0.015, which is among the lowest reported for room temperature SPEs and the lowest achieved for h-BN SPEs. It also exhibits high brightness (~0.5 million counts per second), remarkable stability during continuous operation (>15 min), and a Debye-Waller factor of 45%. First-principles calculations reveal unique carbon defects responsible for these properties, enabled by PLD’s low-temperature synthesis and in situ doping. Our results demonstrate an effective method for large-scale production of high-purity, stable SPEs in h-BN, enabling robust quantum optical sources for various quantum applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Structural characterization of neutron irradiated hexagonal boron-10 nitride-15 single crystals

The negatively charged boron vacancy ($V$$^{–}_{⁠B}$⁠) in hexagonal boron nitride (hBN) is a promising quantum defect that can be used to sense pressure, temperature, and magnetic field with high spatial resolution. hBN enriched with the boron-10 and nitrogen-15 isotopes, denoted h 10 B 15 N, has good contrast and coherence for quantum sensing because nitrogen-15 has nuclear spin (1/2), reducing hyperfine interactions. Boron vacancies can be generated by neutron irradiation, which causes the transmutation of the boron-10 isotope to lithium-7. In this study, the ancillary structural, compositional, and mechanical properties of h 10 B 15 N crystals that have been subjected to neutron irradiation fluences from 1.4 × 10 16 to 8.4 × 10 17 n/cm 2 were thoroughly characterized. Besides creating $V$$^{–}_{⁠B}$⁠, the process also induces other defects that generate strain in the crystal lattice. In turn, the mechanical properties of these crystals change drastically. Investigated here are the visual changes, lattice integrity, composition, crystal strain, and elastic constants (C 33 and C 66 ) to assess how these characteristics change as a function of neutron fluence.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Transforming Boron Carbon Nitride: A Carbon-to-Oxygen Switch to Boost Propane Oxidative Dehydrogenation

Hexagonal boron nitride (h-BN) catalysts exhibit high alkene selectivity in the oxidative dehydrogenation of propane (ODHP). Nevertheless, the conversion-selectivity trade-off persisted primarily due to the low density of oxygen-containing boron active species, while simple and controllable modification strategies for h-BN still face challenges. Herein, we developed an in situ carbon-to-oxygen switch strategy within a tailored boron carbon nitride (BCN) framework, in which uniformly embedded B–C 3 were transformed into B–O 3 via oxidative treatment (denoted as BNO x ). The structural evolution from B–C 3 to B–O 3 was well characterized by spectroscopy and soft X-ray absorption techniques. The resulting BNO x catalysts, enriched with B–O 3 units, demonstrated performance in ODHP, achieving a propane conversion of 50.4% with 32.7% olefin yield at 500 °C. Density functional theory (DFT) calculations confirmed that B–O 3 species preferentially lower activation barriers, rendering the process thermodynamically more favorable. In conclusion, this work introduced an in situ reconstruction method for atomic-level heteroatom-engineered h-BN catalysts, opening an avenue for advanced catalyst design across energy conversion systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Strong electron–phonon coupling in magic-angle twisted bilayer graphene

The unusual properties of superconductivity in magic-angle twisted bilayer graphene (MATBG) have sparked considerable research interest. However, despite the dedication of intensive experimental efforts and the proposal of several possible pairing mechanisms, the origin of its superconductivity remains elusive. Here, by utilizing angle-resolved photoemission spectroscopy with micrometre spatial resolution, we reveal flat-band replicas in superconducting MATBG, where MATBG is unaligned with its hexagonal boron nitride substrate. These replicas show uniform energy spacing, approximately 150 ± 15 meV apart, indicative of strong electron–boson coupling. Strikingly, these replicas are absent in non-superconducting twisted bilayer graphene (TBG) systems, either when MATBG is aligned to hexagonal boron nitride or when TBG deviates from the magic angle. Calculations suggest that the formation of these flat-band replicas in superconducting MATBG are attributed to the strong coupling between flat-band electrons and an optical phonon mode at the graphene K point, facilitated by intervalley scattering. These findings, although they do not necessarily put electron–phonon coupling as the main driving force for the superconductivity in MATBG, unravel the electronic structure inherent in superconducting MATBG, thereby providing crucial information for understanding the unusual electronic landscape from which its superconductivity is derived.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2003

Inexpensive Method for Coating the Interior of Silica Growth Ampoules with Pyrolytic Boron Nitride

An inexpensive method was developed for coating the interior of silica ampoules with hexagonal boron nitride. An aqueous solution of boric acid was used to coat the ampoule prior to drying in a vacuum at 200 C. This coating was converted to transparent boron nitride by heating in ammonia at 1000 C. Coated ampoules were used to achieve detached solidification of indium antimonide on earth.

Wang, Jianbin↗
DOE OSTI2025

Low-dimensional solid-state single-photon emitters

Solid-state single-photon emitters (SPEs) are attracting significant attention as fundamental components in quantum computing, communication, and sensing. Low-dimensional materials-based SPEs (LD-SPEs) have drawn particular interest due to their high photon extraction efficiency, ease of integration with photonic circuits, and strong coupling with external fields. The accessible surfaces of LD materials allow for deterministic control over quantum light emission, while enhanced quantum confinement and light–matter interactions improve photon emissive properties. This perspective examines recent progress in LD-SPEs across four key materials: zero-dimensional (0D) semiconductor quantum dots, one-dimensional (1D) nanotubes, two-dimensional (2D) materials, including hexagonal boron nitride (hBN) and transition metal dichalcogenides (TMDCs). We explore their structural and photophysical properties, along with techniques such as spectral tuning and cavity coupling, which enhance SPE performance. Finally, we address future challenges and suggest strategies for optimizing LD-SPEs for practical quantum applications.

42 ENGINEERING↗
DOE OSTI2024

Three-dimensional structure of buried heterointerfaces revealed by multislice ptychography

Here, we report on the three-dimensional (3D) structure determination of a twisted hexagonal boron nitride (h-BN) heterointerface from a single-view dataset using multislice ptychography. We identify the buried heterointerface between two twisted h-BN flakes with a lateral resolution of 0.57 Å and a depth resolution of 2.5 nm. The latter represents a significant improvement (∼2.7 times) over the aperture-limited depth resolution of incoherent imaging modes, such as annular-dark-field scanning transmission electron microscopy. This improvement is attributed to the diffraction signal extending beyond the aperture edge, with the depth resolution set by the curvature of the Ewald sphere. Future advancements in this approach could enhance the depth resolution to the subnanometer level and enable the identification of individual dopants, defects, and color centers in twisted heterointerfaces and other materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

A General and Modular Approach to Solid-State Integration of Zero-Dimensional Quantum Systems

Here, we present an all-electrical readout mechanism for quasi-0D quantum states (0D-QS), such as point defects, adatoms, and molecules, that is modular and general, providing an approach that is amenable to scaling and integration with other solid-state quantum technologies. Our approach relies on the creation of high-quality tunnel junctions via the mechanical exfoliation and stacking of multilayer graphene (MLG) and hexagonal boron nitride (hBN) to encapsulate the target system in an MLG/hBN/0D-QS/hBN/MLG heterostructure. This structure allows for all-electronic spectroscopy and readout of candidate systems through a combination of coulomb and spin-blockade. As a proof of principle, we demonstrate electronic tunneling spectroscopy of point defects in hBN and the molecular qubit vanadyl phthalocyanine. Our approach demonstrates a new pathway for the incorporation of molecules and atomic defects into solid-state quantum devices and circuits along with a readout scheme that does not rely on highly constrained optical processes for photonic readout.

defects in hexagonal boron nitride↗
DOE OSTI2026

High-Performance Near-Infrared Quantum Emission from Color Centers in hBN

Color centers hosted in hexagonal boron nitride (hBN) have emerged as a highly promising platform for single-photon emission and spin-photon technologies relevant to quantum communication and quantum networking. As a wide bandgap van der Waals material, hBN can host optically active quantum defects across a broad spectral range. Here, we demonstrate a simple and scalable oxygen-plasma process that reproducibly creates single quantum emitters in hBN with blinking-free zero-phonon lines (ZPLs) spanning near-infrared (NIR) from 700 up to 971 nm. These emitters combine MHz-level brightness, single-photon purity up to 99.9%, and ultranarrow cryogenic line widths down to 2.7 GHz under quasi-resonant excitation, placing them in a particularly attractive regime for quantum photonics. Photostability measurements further reveal resistance to photobleaching, subnanometer spectral stability over long time scales, and near-shot-noise-limited intensity fluctuations. Analysis of the phonon sidebands shows weak vibronic coupling and ZPL-dominated emission, with Debye–Waller factors approaching 50%. Control experiments together with elemental mapping support oxygen incorporation as a necessary ingredient in activating the NIR emitter population, while first-principles calculations identify O N V N and O N V N H as the leading defect candidates. These results establish a high-performance NIR quantum-emitter platform in hBN for free-space quantum networking and future integrated quantum-photonic architectures.

2D materials↗
DOE OSTI2025

Direct ink writing of shear exfoliated two-dimensional nanomaterial- elastomeric multifunctional nanocomposite

Direct ink writing (DIW) of polymer nanocomposites with high loadings of two-dimensional (2D) nanofillers (graphene and hexagonal boron nitride (hBN)) is challenging because of potential clogging, use of hazardous solvents, and agglomeration. Here, in this work, a shear exfoliation and sieving method to prepare DIW ink with high loading of nanofillers produced from low-cost bulk layered materials such as graphite and bulk hBN powder for successful DIW printing without the use of any solvents, binders, or plasticizers. The single-step exfoliation technique resulted in a composite with substantial layer reduction along the c-axis, as confirmed by SEM, TEM, XRD, and Raman analysis. Incorporating exfoliated graphene (40 wt%) increased viscosity by ∼6 orders of magnitude due to enhanced particle–matrix interactions, leading to pronounced yield stress behavior and a yield stress of approximately 1598 Pa, which enabled excellent shape retention during extrusion. Using the DIW technique, porous structures such as desalination membranes, self-sensing bone scaffolds, thermal management coating, and serpentine strain sensors were fabricated. When tested in a direct contact membrane distillation setup, the fabricated membrane demonstrated a promising permeate flux of 21.85 Lm −2 h −1 and a salt rejection of 74.3 %. The fabricated serpentine sensor exhibited stable signal variations under cyclic tensile loading, with a working range of 0–200 % strain and a maximum gauge factor of 43,735. A cell culture test using the printed bone scaffold demonstrated promising cell attachment and proliferation. The DIW printed hBN nanocomposite exhibited reversible shape change under heat, demonstrating potential 4D printing capability and efficient thermal management when exposed to high heat or flame.

Desalination↗
DOE OSTI2025

First-Principles Study of Molecular Hydrogen Activation by Defects in Boron Nitride

Here, we used density functional theory simulations in combination with ab initio thermodynamics to determine the H 2 partial pressure (p H2 )-dependent energetics associated with H 2 activation and recovery at various defect sites in hexagonal boron nitride (h-BN). We found that some defects are very reactive with hydrogen, thereby definitely trapping hydrogen in defective h-BN. However, depending on hydrogen partial pressure, less reactive defect sites can be populated. Because of the lower binding capability of these sites, they would allow hydrogen to be recycled and recovered. For small defect sizes, we found that hydrogen preferentially binds to nitrogen sites by forming N–H bonds, and if no N sites are available then boron sites would be the next to bind hydrogen. Hydrogen dissociation via frustrated Lewis pair is found to be more favorable than forming only N–H bonds but only if the defect size is large enough to accommodate steric effects. For specific conditions such as T = 400 K, p H2 = 1 bar, and only considering one molecular H 2 per defect, three defects, namely, the N monovacancy, 3V(1B2N), and hexagonal 6V(3B3N) could play a role in both the activation and recycling of H 2 as they would be reacting enough to allow a favorable splitting of H 2 while not binding too strongly to allow its recovery. More broadly, a range of p H2 and hydrogen loading conditions were investigated for different types of defects and the finding suggests that p H2 could be used to fine-tune the Gibbs free energy of hydrogenation, thereby allowing several types of defects at different hydrogen loading contents to play a role in the activation/recovery process of H 2 in defective h-BN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1997

Low pressure growth of cubic boron nitride films

A method for forming thin films of cubic boron nitride on substrates at low pressures and temperatures. A substrate is first coated with polycrystalline diamond to provide a uniform surface upon which cubic boron nitride can be deposited by chemical vapor deposition. The cubic boron nitride film is useful as a substitute for diamond coatings for a variety of applications in which diamond is not suitable. any tetragonal or hexagonal boron nitride. The cubic boron nitride produced in accordance with the preceding example is particularly well-suited for use as a coating for ultra hard tool bits and abrasives, especially those intended to use in cutting or otherwise fabricating iron.

Ong, Tiong P.↗
NASA NTRS2019

Slow Crack Growth of Boron Nitrides for Electric Propulsion Components

The Deep Space Gateway requires thruster systems to maintain spatial position. One control system being considered involves Hall thrusters. Historically, Hall thruster discharge channels have used several grades of hot-pressed hexagonal boron nitride. This study compliments data presented at ICACC (International Conference and Expo on Advanced Ceramics and Composites) 2018 and investigates the fracture toughness and slow crack growth parameters of several commercially available boron nitride grades including HP, M, M26, and Shapal Hi-M. The prior work revealed that some grades of BN absorb water and change strength thus presenting a philosophical conundrum on crack growth test methods. Advantages of different test methods will be discussed. The grades selected for this study are of interest because their available billet size is sufficient for Hall thruster discharge channels, or because they have heritage in Hall thruster applications. Ultimately, the data will be used to perform material selection, system design and reliability analyses.

Ceramics↗
NASA NTRSDate not supplied

Laser Sintering of RTM385-SLS Thermoset Polyimides With Boron Nitride

RTM385-SLS is a melt-processable thermoset polyimide resin specially formulated with a complex melt viscosity (ƞ*) of ~104-105 poise for laser sintering. RTM385-SLS resin powder was mixed with 20-25% of hexagonal boron nitride (h-BN) and subjected to laser sintering (LS) to print out “Green” disks and dogbone specimens which could be further post-cured in an oven to complete the crosslinking of the reactive phenylethynyllphthalic anhydride (PEPA) terminal groups within the resin to achieve a very high glass transition temperature (T g ) of 385°C. The cured composite specimens were then subjected to thermal analysis, thermal conductivity measurement and mechanical testing for characterization.

Additive manufacturing↗