Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HTL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Hydrothermal liquefaction of wastewater-grown algae to produce synthetic aviation fuel: A combined experimental study and techno-economic assessment

Large-scale algae farms may someday become a consistent source of biomass feedstock for biofuels. Near-term supplies of algal biomass are available at certain water resource recovery facilities as algae cultivation is used as a method for nutrient recovery from specific effluent streams. Algae grown as a service shifts the value to the service rather than its sole use as a feedstock, which could enable the provision of algal biomass at low to no cost to biofuel producers. Hydrothermal liquefaction (HTL) can readily upgrade wet feedstock slurries, such as algae, to produce a carbon-enriched biocrude. The HTL biocrude can be hydrotreated and distilled, producing a variety of distillate fuels, including synthetic aviation fuel (SAF). We present a pathway, showing the experimental production of SAF from wastewater-grown algae via HTL, along with a techno-economic assessment to identify opportunities for process improvements. Critical quality attributes of the SAF, such as density, viscosity, surface tension, and freeze point, were estimated within the expected fuel experience ranges when compared against petroleum jet fuel. The average minimum fuel selling price of fuels from wastewater-grown algae for breakeven economics was $\$9.04$ per gasoline gallon equivalent (GGE). The sale of co-products such as struvite fertilizers and cement additives can add revenue to reduce the net cost. Ultimately, the selling price is influenced by the scale of the HTL processing facility. Adjusting estimations in the process scale, algae yield, and capital cost estimation can lower the price to $\$6.51$/GGE or raise it to $13.07/GGE.

Biofuels↗
DOE OSTI2025

Rheology and engine performance of very low sulfur fuel oil blended with 10% fast pyrolysis and hydrothermal liquefaction oils in a 2-stroke crosshead engine

The performance and emissions for a downscaled single-cylinder 2-stroke crosshead engine were determined for a very low sulfur fuel oil (VLSFO) when blended with 10 wt.% fast pyrolysis (FP) or hydrothermal liquefaction (HTL) bio-intermediates. The FP and HTL oils were derived from biomass and were observed to contain lower molecular weight (MW) hydrocarbons than neat VLSFO (which was evaluated as a baseline comparison). The addition of either biofuel reduced the overall viscosity of the VLSFO. Aging tests at 50, 90, and 120°C showed that the dynamic viscosity of VLSFO increased with exposure time up to two weeks. Similar trends were observed for the FP and HTL blends, but a pronounced spike in viscosity occurred for these fuels during the early period of exposure. None of the viscosity increases exceeded the operational limits of fuel system pumps. Engine performance studies were conducted under low, medium and high load operational settings. The relative performance of the test fuels was highly dependent on operating condition. In general, the engine results for the three test fuels were similar, but modest improvements in brake thermal efficiency and brake specific fuel consumption were observed, which may be attributed to the heightened reactivity of low molecular weight fraction of the FP and HTL oils.

09 BIOMASS FUELS↗
DOE OSTI2024

Solution-processed tungsten diselenide as an inorganic hole transport material for moisture-stable perovskite solar cells in the n-i-p architecture

Some of the obstacles to the commercialization of perovskite solar cells (PSCs) are their long-term moisture stability and material cost of the constituent layers, such as the commonly used spiro-OMeTAD hole transport layer (HTL). Replacing the spiro-OMeTAD with low-cost inorganic hole transport materials (HTMs) are important to further elevate the attractiveness of PSCs for commercialization. Perovskite-compatible, solution-exfoliated two-dimensional (2D) transition metal dichalcogenides (TMDCs) are being considered as viable candidates for inorganic HTMs. We consider one such TMDC, WSe 2 which was chemically exfoliated using dichlorobenzene (DCB), a perovskite-compatible solvent, as it was integrated with triple cation perovskite absorbers within the solar cell stack. Here, the WSe 2 HTL required heat treatment processes to be maintained below 100°C in order to preserve the integrity of the underlying perovskite; despite this lower temperature post treatment process, the structural morphology of the film revealed its dense and pinhole-free nature. Temperature-dependent transport studies conducted on the WSe 2 film provided evidence of its semiconducting character and its ability to extract holes well from the underlying triple-cation Cs 0.05 FA 0.79 MA 0.16 PbI 2.45 Br 0.55 absorber. The inorganic HTL offered better environmental stability in moisture-rich environments of up to 60% relative humidity, in comparison to spiro-OMeTAD HTL-based devices which degraded faster as a result of pinholes

14 SOLAR ENERGY↗
DOE OSTI2025

Electrocatalytic oxidation of hydrothermal liquefaction-derived aqueous phase for on-site wastewater treatment and H 2 production

Electrocatalytic oxidation (ECO) is a promising method for generating molecular hydrogen (H 2 ) while simultaneously treating the aqueous phase (AP) from hydrothermal liquefaction (HTL) of biomass-derived feedstocks such as algae, food waste, sludge, and wood. This study highlights the impact of HTL-AP composition on ECO performance, mainly activity, stability, and efficiency in a batch and flow electrolyzer. We demonstrated current efficiency (CE) for chemical oxygen demand (COD) removal ranges from 14% to 85% in the flow electrolyzer with electrode stability increasing from 20 to ≥2,800 h. Decreasing the applied potential enhances the CE. High ammonium content can accelerate deactivation, yet chloride ions appear to aid oxidation of organic compounds and enhanced anode stability. A preliminary energy and H 2 balance for an HTL sewage sludge plant shows that the HTL-AP contains sufficient COD to produce all the H 2 needs for bio-oil hydrotreating, with a 26% surplus available for other uses.

Electrolysis↗
DOE OSTI2020

Carbazole-Based Hole-Transport Materials for High-Efficiency and Stable Perovskite Solar Cells

As organic–inorganic halide perovskite solar cells (PSCs) near commercialization, stability challenges during real-world conditions, such as durability at elevated temperatures, still need to be addressed. We have previously reported that doping of triarylamine-based hole-transport layers (HTLs) with a triarylamine-based radical cation salt (EHCz-3EtCz/EH44-ox) leads to enhanced PSC stability at elevated temperatures. While it was shown the radical cation dopant did not need to be identical to the HTL matrix, little was known about dopant exchange to realize the maximum impact on device-level properties (e.g., increase in low intrinsic conductivity, mobility, hydrophobic properties, ease of synthesis, and thermal stability). In this paper, we study the impact of dopant exchange among stable, low-cost, high-glass-transition temperature (Tg), and easily synthesized triarylamine-based HTL and radical triarylamine cation salts as dopants. Using EH44-ox as dopant leads to the improved device-level power conversion efficiency (PCE) for all HTL matrices assessed. Moreover, increasing the number of ethylhexyl chains from one to two per molecule and positioning these chains at the periphery rather than the core resulted in improved hydrophobicity. PSCs based on our HTL formulations have similar power conversion efficiencies (PCE) as those of PSCs based on commercially available HTLs while demonstrating greatly improved device-level stability at elevated temperatures.

14 SOLAR ENERGY↗
DOE OSTI2023

Origins of Photoluminescence Instabilities at Halide Perovskite/Organic Hole Transport Layer Interfaces

Metal halide perovskites are promising for optoelectronic device applications; however, their poor stability under solar illumination remains a primary concern. While the intrinsic photostability of isolated neat perovskite samples has been widely discussed, it is important to explore how charge transport layers—employed in most devices—impact photostability. Here, in this paper, we study the effect of organic hole transport layers (HTLs) on light-induced halide segregation and photoluminescence (PL) quenching at perovskite/organic HTL interfaces. By employing a series of organic HTLs, we demonstrate that the HTL’s highest occupied molecular orbital energy dictates behavior; furthermore, we reveal the key role of halogen loss from the perovskite and subsequent permeation into organic HTLs, where it acts as a PL quencher at the interface and introduces additional mass transport pathways to facilitate halide phase separation. In doing so, we both reveal the microscopic mechanism of non-radiative recombination at perovskite/organic HTL interfaces and detail the chemical rationale for closely matching the perovskite/organic HTL energetics to maximize solar cell efficiency and stability.

14 SOLAR ENERGY↗
DOE OSTI2021

Hydrothermal Liquefaction: Path to Sustainable Aviation Fuel

A variety of technologies are currently under development for producing sustainable aviation fuel (SAF), and one of the most promising technologies is the hydrothermal liquefaction (HTL) of low-cost waste feedstocks. Organizations across the globe are conducting research and development on HTL technology at scales varying from the laboratory to demonstrations focused on various aspects of technology development. The identification of more advanced and sustainable solutions to maximize the fuel yield while optimizing fuel properties and achieving cost parity with conventional fuels is the major focus in developing HTL technology. This workshop on the application of HTL to produce SAF, coordinated by the U.S. Department of Energy Bioenergy Technologies Office, Commercial Aviation Alternative Fuels Initiative, and Pacific Northwest National Laboratory (PNNL), was held virtually on November 17–19, 2020. A broad spectrum of experts from industry, academia, national laboratories, and government from across the globe participated in the workshop, contributing their ideas, insights, and perspectives. A series of keynote presentations, plenary presentations, and breakout sessions provided an interdisciplinary framework for sharing information and building collaboration. This document provides an overview of the content discussed in the presentations as well as the breakout session discussion. Diverse stakeholder perspectives were gathered, and this wealth of information collectively provides an update on the current state of the field and identifies the key research opportunities.

09 BIOMASS FUELS↗
DOE OSTI2023

Microalgae Hydrothermal Liquefaction and Biocrude Upgrading: 2022 State of Technology

A preliminary techno-economic analysis (TEA) was developed for the fiscal year (FY) 2022 state of technology (SOT) assessment to evaluate the benefits and risks of using demonstrated, high-productivity algae strains for fuels generation, including sustainable aviation fuel (SAF). In 2022, the marine algal strain, Picochlorum celeri, which demonstrated the highest outdoor biomass productivities reported to date in the DOE-funded open-pond raceway testbed at the Arizona Center for Algae Technology and Innovation (AzCATI), was tested for continuous hydrothermal liquefaction (HTL) processing at PNNL. HTL testing results demonstrated a biocrude yield of 0.33 g/g algae on an ash-free dry weight (AFDW) basis from P. celeri. The hydrotreatment testing of the HTL biocrude from P. celeri was also conducted to investigate the production of jet fuel from marine algal biomass. To the best of our knowledge, this is the first report of jet fuel production from autotrophically grown marine algal biomass. The current hydrotreating testing demonstrated approximately 22.7 wt% of the hydrotreated oil within the typical boiling-point range of jet fuel (150–250 °C). Initial testing of the jet fuel cut (JFC) showed that the physical properties under investigation were within typical ranges for petroleum-based jet fuels. The experimental work of this study closes the gap between outdoor algae cultivation and algae conversion to critical transportation fuels using the same algae strain for both cultivation and conversion testing. The continuous HTL and the upgrading testing described herein demonstrate the potential of producing sustainable aviation fuel (SAF) from algae cultivated in open-pond systems using the primary inputs of sunlight and carbon dioxide.

09 BIOMASS FUELS↗
DOE OSTI2025

Hydrothermal Liquefaction of Structurally Diverse Lignins: Insights into Biocrude Yield, Fuel Properties, and Reaction Mechanisms

Lignin holds significant promise as a feedstock for biocrude production via hydrothermal liquefaction (HTL). Although lignin HTL has been widely studied, the specific depolymerization pathways associated with distinct lignin structures remain largely unexplored. This study investigates the HTL of four structurally diverse lignins: alkaline (AL), dealkaline (DAL), organosolv (OL), and lignosulfonate (LS) across 270–310 °C to elucidate structure-specific mechanisms governing biocrude yield and composition. AL and OL achieved the highest yields (16.8 ± 0.3% and 16.8 ± 2.5%), with AL-derived biocrude showing the highest carbon content (70.2 ± 0.0%) and HHV (31.0 ± 0.2 MJ/kg). In contrast, DAL and LS produced lower yields and inferior fuel quality due to higher sulfur content and lower carbon enrichment. The structures of AL and DAL, containing fewer methoxy groups, produced guaiacol-rich biocrudes (46.6% and 69.5%). Methylation in AL formed alkyl guaiacols and veratroles, while DAL favored side-chain oxidation. OL retained complex structures, forming syringols and desaspidinol, which contributed to heavier biocrude compounds. Sulfonate groups in LS were stabilized mostly as sulfides, leading to elevated sulfur content. These findings provide mechanistic insight into how lignin structure governs HTL behavior, enabling targeted control of biocrude yield and quality for renewable fuel production.

biocrude↗
DOE OSTI2020

System-Level Optimization to Improve Biofuel Potential via Genetic Engineering and Hydrothermal Liquefaction

The economic success of biofuels and bioproducts depends on system-level optimization including biomass production and conversion. Hydrothermal liquefaction (HTL) can convert wet biomass such as microalgae into a biofuel intermediate (BFI) under elevated temperatures and pressure. An understanding of the impacts of biomass composition on BFI yield and quality can inform genetic engineering strategies in the improvement of biochemical composition for biofuel production. In this work, wild type cyanobacterium Synechocystis sp. PCC 6803 biomass was doped with various common cellular storage compounds in lab-scale HTL experiments. Doping with glycogen or polyhydroxybutyrate (PHB) significantly reduced BFI yields, while doping with triglycerides (TAG) or medium chain-length polyhydroxyalkanoate (mcl-PHA) increased BFI yield and quality. In light of these observations, a genetically engineered Synechocystis strain deficient in glycogen biosynthesis was cultivated to produce biomass for HTL, leading to a 17% increase in BFI yield. In addition, we built a multiphase component additivity (MCA) model that can predict BFI yield and quality with PHAs in the biomass. This work demonstrates an effective strategy to integrate strain development with downstream biomass conversion to maximize biofuel yield, with lessons applicable to microalgae as well as other biomass.

09 BIOMASS FUELS↗
DOE OSTI2023

Improved Light Extraction in Organic Light‐Emitting Diodes via Semiconductor Dilution

Increasing the internal light extraction efficiency of organic light‐emitting diodes (OLEDs) is key to improving their performance for solid‐state lighting applications; however, it is challenging to do this in a way that is compatible with high volume manufacturing. Here, it is shown that the outcoupling efficiency of OLEDs can be improved by diluting their hole transport layer (HTL) with the low refractive index material trifluoropropyl oligomeric silsesquioxane (F‐POSS). Specifically, co‐evaporating 40 vol.% F‐POSS in the HTL of single and multi‐stack phosphorescent OLEDs decreases its refractive index by Δ n ≈ 0.2, which in turn yields a ≈12% increase in their outcoupling efficiency with no impact on electrical performance or operational lifetime. This result is significant because F‐POSS is a small molecule that sublimes cleanly, does not aggregate, and is compatible with state‐of‐the‐art HTL materials, making it a realistic path to increase light extraction in commercial OLEDs manufactured on existing production lines.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Pyrrole Modified 3,4‐Propylenedioxythiophene Conjugated Polymer as Hole Transport Layer for Efficient and Stable Perovskite Solar Cells

Despite the outstanding electric properties and cost-effectiveness of poly(3,4-ethylenedioxythiophene) (PEDOT) and its derivatives, their performance as hole transport layer (HTL) materials in conventional perovskite solar cells (PSCs) has lagged behind that of widely used spirobifluorene-based molecules or poly(triaryl amine). This gap is mainly from their poor solubility and energy alignment mismatch. In this work, the design and synthesis of a pyrrole-modified HTL (PPr) based on 3,4-propylenedioxythiophene (ProDOT) are presented for efficient and stable PSCs. As a result of the superior defects passivation ability, excellent contact with perovskite, enhanced hole extraction, and high hydrophobicity, the unencapsulated PPr-based PSCs showed the peak PCE of 21.49% and outstanding moisture stability (over 4000 h). This work highlights the potential application of ProDOT-based materials as HTL for PSCs and underscores the importance of the rational design of PEDOT and its derivatives.

14 SOLAR ENERGY↗
DOE OSTI2026

Electrochemical Reactions Under Reverse Bias Create Additional Mobile Ions That Enable Hole Tunneling in Metal Halide Perovskite Diodes

Gradual reverse-bias breakdown in metal-halide perovskite diodes and solar cells is thought to originate from hole tunneling through steep bands in an ionic depletion region near the electron-transport layer after positively charged iodine vacancies accumulate near the hole-transport layer (HTL). However, typical reported mobile-ion concentrations near 1 x 10^17 cm-3 are too small to quantitatively explain significant tunneling-current densities and (Zener) breakdown observed near -5 V. Here, we show that inferred mobile-ion concentrations increase by more than 100x, to over 1 x 10^18cm-3 , within just 3 min of reverse bias at -6.0 V in p-i-n perovskite diodes. We attribute this increase to iodide oxidation and coupled iodine vacancy creation that must be balanced by reduction reactions near the HTL. Sub-optimal HTL coverage leads to direct contact between the transparent conducting electrode and perovskite, facilitates reduction events, enables the creation of even larger inferred mobile-ion concentrations (~1 x 10^19cm-3 ), and leads to faster degradation under reverse bias. This explains previous work that showed increased breakdown voltages and improved reverse-bias stability by implementing thick, uniform HTLs.

14 SOLAR ENERGY↗
DOE OSTI2021

Copper iodide nanoparticles as a hole transport layer to CdTe photovoltaics: 5.5 % efficient back-illuminated bifacial CdTe solar cells

We report the role of copper iodide (CuI) nanoparticles (NPs) as a hole transport layer (HTL) in cadmium sulfide/cadmium telluride (CdS/CdTe) photovoltaics. These CuI NPs were prepared using solution processing at room temperature and used to fabricate monofacial and bifacial CdTe solar cells with different back contacts. Using CuI/Au as the back contact, the device efficiency reached to 14.8% with outstanding fill factor (FF) of 79.2%. Replacing the gold (Au) electrode with sputtered transparent indium tin oxide (ITO), a CuI/ITO back contact yielded photoconversion efficiencies (PCEs) of 11.6% and 5.5% under front and back illumination respectively. Bifacial devices (CdTe/ITO) without the CuI NP HTL have an efficiency of 7.0% and 1.0% for front and back illumination, respectively. For CuI/ITO, a current collection of 12.0 mAcm -2 was observed upon back illumination which significantly improved over an ITO-only back contact (5.0 mAcm -2 ). The PCE obtained from back illumination was enhanced when using CuI NPs as the HTL due to the reduced back barrier height, and improved back interface as determined by temperature dependent current vs. voltage characteristics and impedance spectroscopy analysis. The improvement in device performance of the bifacial configuration is a significant step forward toward realizing thin film photovoltaic modules which harvest energy incident on the rear of the module.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Synergistic Interactions During Co-Hydrothermal Liquefaction of Food Waste and Biomass Model Compounds for Increased Sustainable Aviation Fuel Production

Hydrothermal liquefaction (HTL) of lignocellulosic biomass is plagued with low biocrude yields owing to the tendency of highly reactive oxygenated intermediates to condense to form biochars. By contrast, the high protein content in food waste is comprised of substantial nitrogen species, which are known to interact strongly with oxygenates through Maillard, amide, and peptide bond formation reactions. Co-feeding food waste and lignocellulose opens new reaction pathways for biocrude formation but is currently poorly understood. This work evaluated the molecular level interactions between food waste and lignocellulose model compounds and the corresponding effect on product yields and quality. Food waste–cellulose and food waste–xylan feedstock blends achieved maximum biocrude carbon yield improvements of 12.2% and 10.1%, respectively, relative to a simple linear model that interpolates between the yields of the pure feedstocks. Increases in biocrude yield were balanced by corresponding decreases in char yield, indicating synergistic interactions between the feeds during HTL. Biocrude volatility analysis revealed that increased biocrude yield preferentially benefitted the jet fuel fraction, which comprised up to 22.6% of the total carbon yield for food waste–cellulose blends. Biocrude and char were analyzed using GC–MS and FT-IR spectroscopy to investigate the source of synergistic trends and provide greater mechanistic understanding. Key cofeeding effects included the promotion of retro-aldol condensation reactions and trans-esterification of fatty acids, sequestering carbon in the biocrude phase via the inhibition of char formation while increasing biocrude volatility toward jet fuel-range compounds. These results indicate the potential for judicious selection of HTL cofeeds to increase both biocrude yield and selectivity to desired fuel precursors, including sustainable aviation fuel.

Maillard reaction↗
DOE OSTI2022

Roadmap for Deployment of Modularized Hydrothermal Liquefaction: Understanding the Impacts of Industry Learning, Optimal Plant Scale, and Delivery Costs on Biofuel Pricing

Hydrothermal liquefaction (HTL) is a promising technology for converting abundant organic wastes into fuels. Previous techno-economic analyses (TEAs) of HTL have been used to estimate the minimum fuel selling price (MFSP) of biofuel products, but these analyses often assume a bespoke plant design where each plant operates under unique process conditions and neglect transportation costs. However, transportation costs must be included in realistic TEAs, and further, a mass-produced fixed-scale modular plant design approach may be more effective than case-by-case plant design, provided that there is sufficient market capacity to benefit from modularization. This study estimates fuel price behavior in the presence of transportation costs and benefits stemming from modular plant design. This analysis indicates that a modular process capable of handling 60 dry tons per day (DTPD) is optimal, resulting in a ~25% reduction in MFSP (from $4.70/GGE, fully upgraded) at complete market feedstock utilization compared with case-by-case design. The associated cost reductions are attributable to learning benefits and modularization. Several HTL deployment “roadmaps” are then explored, with each roadmap consisting of different periods of case-by-case design followed by adoption of a modularized approach. A period of nonmodular industry growth up to market saturation of ~7% followed by implementation of modular plant design strikes a balance between the investment risk and learned cost reductions associated with modular plant design. However, if bespoke plants built during this period of nonmodular growth saturate more than 23% of available feedstock, learned cost reductions are significantly diminished. Here, this study points to the potential benefits of modularized and decentralized waste-to-energy processes when the modularization follows an optimal deployment strategy.

09 BIOMASS FUELS↗