Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HMX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Investigating deformation and mesoscale void creation in HMX based composites using tomography based grain scale FEM

The microstructure of plastic bonded explosives (PBXs) significantly affects their macroscale mechanical characteristics. Imaging and modeling of the mesoscale constituents allows for a detailed examination of the deformation of mechanically loaded PBXs. In this study, a pair of explosive HMX crystals were bound with an HTPB based polymer binder and imaged using micro Computed Tomography ($µ$CT). Delamination of the polymer binder from the crystals was induced via macro-scale application of a tensile load. Cohesive parameters for simulation of the crystal/binder interface were determined by comparing numerical and experimental results of the delamination of this bi-crystal system. Simulations showed macro-scale plastic behavior is accommodated through both crystal-binder delamination and plastic deformation of the binder itself. Imaging and simulation of this bi-crystal system demonstrated the complex interplay of material constitutive behavior and grain-scale geometry. Successful parameterization of this relatively simple mechanical system is a step toward a better understanding void nucleation in similarly composed polycrystalline composites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Dependence of the Elastic Stiffness Tensors of PETN, α‐RDX, γ‐RDX, ϵ‐RDX, ϵ‐CL‐20, DAAF, FOX‐7, and β‐HMX on Hydrostatic Compression

Abstract The dependence of the components of the elastic stiffness tensors (or elastic constants) of the organic explosives PETN, RDX, CL‐20, DAAF, FOX‐7, and HMX on hydrostatic pressure up to 10 GPa have been computed using dispersion‐corrected density functional theory. We report the evolution of lattice parameters and the non‐zero stiffnesses for the tetragonal, orthorhombic, and monoclinic crystal symmetries. Linear and quadratic dependencies of the components of the elastic stiffness tensors on volumetric compression and hydrostatic pressure are tabulated for use in single crystal plasticity models.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thermal Gradient Effects on Local Hotspot Ignition in 1,3,5,7‐Tetranitro‐1,3,5,7‐tetrazocane (HMX)

Understanding hotspot ignition, growth, and criticality, as well as the timescales of each, is crucial for parameterizing mesoscale and continuum‐level models that rely on a statistical understanding of hotspots. However, these models often consider hotspots to have uniform temperatures or for hotspots of a given temperature and size to always behave the same. Therefore, using molecular dynamics simulations, we assess the influence of thermal distribution effects on hotspot local ignition and time to ignition in 1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocane (HMX) nanoscale hotspots. Finally, by assessing hotspots with a gradient driven from an initial two‐temperature core–shell setup, we show that small increases in the core temperature under a constant average temperature can lead to order‐of‐magnitude effects on reaction and local ignition timescales.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Prediction of nonlinear specific heat during single crystal HMX phase transition

Here, we develop a thermodynamically consistent chemo-thermo-mechanical model for the β → δ phase transition of energetic HMX crystals. In contrast to previous models, which either considered specific heat to be a constant or utilized a calibrated function, this model provides novel expressions for the specific heats at constant volume and constant elastic strains derived directly from continuum mechanics. In addition, the model provides a novel prediction for the critical temperature at which the chemical heating rate achieves its extremum for Arrhenius kinetics. The numerical solution predicts highly nonlinear specific heat behavior including order of magnitude changes.

42 ENGINEERING↗
DOE OSTI2018

Ultrafast dynamic response of single-crystal β -HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine)

Here, we report experimental and computational studies of shock wave dynamics in single-crystal β-HMX on an ultrafast time scale. Here, a laser-based compression drive (~1 ns in duration; stresses of up to ~40 GPa) is used to propagate shock waves normal to the (110) and (010) lattice planes. Ultrafast time-domain interferometry measurements reveal distinct, time-dependent relationships between the shock wave velocity and particle velocity for each crystal orientation, which suggest evolving physical processes on a sub-nanosecond time scale. To help interpret the experimental data, elastic shock wave response was simulated using a finite-strain model of crystal thermoelasticity. At early propagation times (<500 ps), the model is in agreement with the data, which indicates that the mechanical response is dominated by thermoelastic deformation. The model agreement depends on the inclusion of nonlinear elastic effects in both the spherical and deviatoric stress-strain responses. This is achieved by employing an equation-of-state and a pressure-dependent stiffness tensor, which was computed via atomistic simulation. At later times (>500 ps), the crystal samples exhibit signatures of inelastic deformation, structural phase transformation, or chemical reaction, depending on the direction of wave propagation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Three-dimensional microstructure-explicit and void-explicit mesoscale simulations of detonation of HMX at millimeter sample size scale

Fully three-dimensional (3D) microstructure-explicit and void-explicit mesoscale simulations of the shock-to-detonation (SDT) process of pressed granular HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) are performed. The overall size scale of the models is up to 3 × 3 × 15 mm3, with ∼30 000 grains and 206 265 voids. The models account for the heterogeneous material microstructure, constituent distribution, constituent morphology, and voids. Loading conditions considered involve piston velocities in the range of 600–1200 m/s or pressures in the range of 4–8 GPa. The focus is on analyzing the SDT process and the effects of microstructure and voids on the run-to-detonation distance (RDD). Companion two-dimensional (2D) simulations are also carried out to assess the differences between 2D and 3D. Statistically equivalent microstructure sample sets (SEMSSs) are generated and used for both 2D and 3D, allowing the prediction of the statistical and probabilistic Pop plots (PPs). The predictions are in general agreement with trends in available experimental data in the literature. It is found that both the microstructure (heterogeneous grain size, morphology, and size distribution) and voids significantly affect the RDD and the PPs. These effects are systematically delineated and quantified via the use of SEMSSs with different combinations of attributes. A recently developed probabilistic formulation for the PPs is used to characterize the results, allowing uncertainties in the relations between the shock pressure and RDD arising from material heterogeneities to be quantified. The probabilistic formulation is further used to quantify the confidence levels in the ranked order of influences of different combinations of microstructure and voids on the PPs.

Miller, Christopher (ORCID:0000000206844381)↗
DOE OSTI2021

Multiphase phase-field approach for solid–solid phase transformations via propagating interfacial phase in HMX

In this study, a thermodynamically consistent multiphase phase-field theory has been formulated to describe temperature-induced solid–solid phase transformations via an interfacial phase. This theory satisfies all thermodynamic equilibrium and stability conditions. It allows us to formulate the analytical solutions of the interface profile, energy, width, and velocity for each of the propagating solid–melt and solid–solid interfaces. The formation of the intermediate melt during solid–solid phase transformation has been studied hundreds of degrees below melting temperature in the HMX energetic crystal. The effect of the penalizing term in the phase-field model and two nanoscale material parameters on the appearance and degree of disordering of intermediate melt has been analyzed for the non-equilibrium interface. The developed approach is applicable to phase transitions in geological, pharmaceutical, ferroelectric, colloidal, and superhard materials where phase transformations occur via the intermediate phase.

Roy, Arunabha M. (ORCID:000000034790726X)↗
DOE OSTI2021

Probabilistic effects of porosity and chemical kinetics on the shock initiation of an octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) based explosive

In this work, we investigate the effects of porosity and chemical reactivity on the shock initiation of an HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine)-based polymer bonded explosive due to thin flyer impact using two-dimensional mesoscale simulations. Microstructural samples are computationally generated, and the calculated shock response is compared to experiments. The sample dimensions are 0.1×1.05 mm 2 , and each sample accounts for grain scale heterogeneities, including randomized grain morphology and pore spacing. Simulations are performed using the Lawrence Livermore National Laboratory (LLNL) arbitrary Lagrangian–Eulerian multi-physics code ALE3D. Chemistry and equation of states are handled with LLNL's thermochemical code Cheetah. We employ a modified Arrhenius-based chemical kinetics model that scales the temperature exponent fitting parameter with flyer shock conditions. This new model is calibrated to the mean response of experimental shock initiation thresholds for three separate Kapton flyer thicknesses. A simplified shock initiation criterion is proposed, which classifies the macroscale initiation response based on cross-sectional temperature profiles of the shocked sample. This criterion is used to further investigate the probabilistic response of the sample to variations in the mean porosity and chemical kinetics rate, and we find an inverse correlation between the shock pressure and the confidence interval of the experimental threshold velocity. Furthermore, the methodology presented in this work for quantifying the probabilistic nature of shock initiation is material agnostic. These mesoscale studies may be used to inform continuum scale models and expedite the development of future, tailored energetic formulations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Optical absorption in polycrystalline PETN, RDX, HMX, CL-20 and HNS and its possible effect on exploding bridgewire detonator function

Exploding bridgewire (EBW) detonators work by bursting a thin conducting wire as a result of a high voltage discharge. This process is known to produce a strong UV emission. In this work, the roles of optical absorption, photochemistry, shock sensitivity, and impact sensitivity are assessed with respect to the relative roles each plays in the operation of an EBW detonator. The optical absorptivity and penetration depth have been measured using dilute polycrystalline samples of PETN, RDX, HMX, CL-20 and HNS in KBr between 190 and 1100 nm. The results show strong absorption at UV wavelengths with a gradual decline at longer ones. It is found that while strong UV absorption appears to be necessary, it is not sufficient to make an effective EBW detonator.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

A molecular dynamics simulation study of thermal conductivity anisotropy in β-octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (β-HMX)

Molecular dynamics (MD) simulations were used to predict the thermal conductivity of β-octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (β-HMX) along directions normal to the (011), (110), and (010) crystal planes. These directions were selected based on the measured morphological importance of the corresponding crystal surfaces. A reverse non-equilibrium MD approach was used wherein a constant heat flux is imposed along a prescribed direction and the resulting steady-state temperature gradient determined. The coefficient of thermal conductivity λ is the quotient of heat flux and temperature gradient (i.e. Fourier's law). Finite-size effects and sensitivity to imposed heat flux were investigated. The results reveal a modest dependence of the conductivity on crystal orientation, significant finite-size effects, and low sensitivity to imposed flux so long as the Fourier's law analysis is limited to the spatial interval in the simulation cell for which the temperature gradient is constant. Infinite-length thermal conductivities were estimated by linear regression of λ -1 (L) versus reciprocal cell length L -1 for each direction. The predicted values are systematically larger, but within a factor of two, than most published experimental determinations, the latter of which were obtained for pressed-powder or composite samples rather than oriented single crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Thermal Safety Characterization of HMX, LX-07, PBX 9502, and XTX-8004 in the ODTX System

Incidents caused by fire and combat operations can heat energetic materials that may lead to thermal explosion and result in structural damage and casualty. Some explosives may thermally explode at fairly low temperatures (< 100 C) and the violence from thermal explosion may cause a significant damage. Thus, it is important to understand the response of energetic materials to thermal insults. The One- Dimensional-Time to Explosion (ODTX) system at the Lawrence Livermore National Laboratory has been used for decades to measure times to thermal explosion, threshold thermal explosion temperature, and to determine the kinetic parameters of thermal decomposition of energetic materials. The kinetic parameters are being used to construct predictive models for thermal safety assessment on systems that use the energetic materials. Samples of different configurations (pressed part, powder, paste, and liquid) can be tested in the system. This report summarizes the results of our recent ODTX experiments on 4 energetic materials from 2016 to 2018: HMX (class 1 and class 2), LX-07 (two densities), PBX 9502 (two densities) and XTX-8004, lot C-639. Extensive P-ODTX testing was also performed on the 4 energetic materials and the results will be summarized in a separate report.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Cook-off Study and Gas Pressure Measurement on HMX, LX-07, PBX 9502, and XTX-8004 in the P-ODTX System

Incidents caused by fire and other thermal events can heat energetic materials that may lead to thermal explosion and result in structural damage and casualty. Thus, it is important to understand the response of energetic materials to thermal insults. The One-Dimensional-Time to Explosion (ODTX) system at the Lawrence Livermore National Laboratory (LLNL) has been used for decades to characterize thermal safety of energetic materials. In this study, an integration of a pressure monitoring element has been added into the ODTX system (P-ODTX) to perform thermal explosion (cook-off) experiments on HMX, LX-07, PBX 9502, and XTX-8004. The P-ODTX testing generates useful data (cook-off temperature, cook-off time, and gas pressures) to assist with the thermal safety assessment of relevant energetic materials and components. This report summarizes the results of 24 P-ODTX experiments that were performed from May 2016 to July 2018 on the energetic materials. Recent upgrades to the data acquisition system allows for rapid pressure monitoring in microsecond intervals during thermal explosion. These pressure data are also included in the report. 6 P-ODTX experiments were also performed on detonators and a mock component and the test results will be summarized in a separate report.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

HMX detonation calculation using multi-reaction chain

Detonation of HMX has been simulated using a multi-reaction chain and species equation-of-states. A reacting flow code capable of handling arbitrary number of reactions and species has been used. Computational results are compared to the results produced by a pressure-based single reaction model (AJEX) and a temperature-based single-reaction model. Results show that the multi-reaction approach is capable of producing detonation calculations comparable to the AJEX model calculations, demonstrating that the multi-reaction approach possesses the properties required for the detonation modeling, a prerequisite of deflagration-to-detonation transition modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Low Temperature Time-to-Explosion Experiments on HMX in the LLNL's ODTX/P-ODTX System (FY 2020 Annual Report)

Over the last few decades, there has been a considerable research effort on the thermal decomposition and thermal explosion violence of energetic materials at elevated temperatures in different sample geometries and confinements. Thermal explosion studies on various energetic materials in two-dimensional geometry such as the Scaled-Thermal-Explosion-Experiment (STEX) system and the Sandia-Instrumented-Thermal-Ignition (SITI) system have been reported. The One-Dimensional Time to Explosion (ODTX) system, designed and built by LLNL, has been used since 1970s for thermal explosion studies. The system is attractive because of the one-dimensional geometry and minimal sample requirement. With the recent integration of a pressure monitoring element, the system can study pressure behavior of materials subjected to and during thermal exposure. Rapid pressure monitoring in µsec intervals allow for enhanced pressure determination in the time right before thermal explosion. The test data can be used for the validation of existing thermal models, particularly for introducing pressure terms. This report summarizes the efforts in performing small-scale safety tests, particle size measurements and conducting 7 ODTX/P-ODTX experiments on the Cl5 HMX material that Hunting uses for oil field applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Computational Determination of the Refractive Index of TATB, LLM-105, β-HMX, & α-RDX

In this study, we use Materials Studio CASTEP, an ab initio quantum mechanical (QM) program employing density functional theory (DFT), to compute the refractive index (RI) of solid energetic materials, specifically, PETN (tetragonal phase), TATB, LLM-105, β-HMX, and α-RDX. The use of quantum mechanical DFT methods affords the investigation of the optical mate rial properties of a system without the need for any experimental input. The RI values of PETN and TATB have been experimentally determined previously and are compared here to the QM derived RI values as validation of the theoretical approach in determining material optical proper ties. To date, experimental measurements to determine the RI values for LLM-105 have yet to be determined. This fact obviates the need to determine LLM-105 RI values using quantum mechanical means.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Surface properties of HMX crystal

The surface properties of Beta-HMX crystals were studied. The surface energies of three principal crystal faces were obtained by measuring contact angles with several reference liquids. The surface energies and polarity of the three crystal faces are found to be different.

Yee, R. Y.↗
NASA NTRS1980

Effect of HMX on the combustion response function

Over a pressure range of 3.5-7 MPa and a frequency range of 500-2000 Hz and compared to propellants having equivalent energy and burn rate, HMX produces less pressure-coupled acoustic driving than AP and is equivalent to NC/TMETN. Formation of carbonaceous combustion products indicates that binder decomposition does not follow equilibrium thermochemistry, and that this is aggravated by fuel richness or the absence of AP.

Strand, L. D.↗
DOE OSTI2018

Gas Retention in an HMX-based Explosive (LX-14)

In previous studies, we found that the nitroplasticizer in the HMX-based explosive PBX 9501 played a crucial role in cookoff, especially when predicting response in larger systems. We have recently completed experiments with a similar explosive, LX-14, that has a relatively nonreactive binder. We expected the ignition times for LX-14 to be longer than PBX 9501 since PBX 9501 has a more reactive binder. However, our experiments show the opposite trend. This paradox can be explained by retention of reactive gases within the interior of LX-14 by the higher strength binder resulting in faster ignition times. In contrast, the binder in PBX 9501 melts at low temperatures and does not retain decomposition gases as well as the LX- 14 binder. Retention of reactive gases in LX-14 may also explain the more violent response in oblique impact tests when compared to PBX 9501.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗