Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geometric harmonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Insights on the Influence of the Central-Cut Width of the Box Assembly with Removable Component on Its Dynamical Responses

This investigation focuses on the dynamical effects caused by varying the central-cut width within the Box Assembly with Removable Component (BARC) system. The central-cut widths included in this study are a 0.5″ cut, a 0.25″ cut, a thin 0.1″ cut, and a structure that did not have a cut at all. Finite element analysis was conducted to determine the mode shapes and natural frequencies of each of the BARC structures. Structural dynamics experiments were run to examine the effects of the central-cut width on the dynamical responses and nonlinear characteristics of the BARC system. Free vibration testing with an impact hammer was carried out to excite the system and extract the dominant frequencies and directions of the significant responses. A pseudorandom vibration test that allows for the qualitative determination of any nonlinear behavior within the system was performed. This type of behavior can include nonlinear softening, nonlinear hardening, and the most common, nonlinear damping due to the presence of several bolted-joint connections and the possible activation of geometric and inertia nonlinearities. To quantitatively investigate the impacts of the central-cut width on the dynamics of the system, swept sinusoidal testing was conducted. It is determined that almost all systems with central cuts demonstrate the presence of nonlinear softening, but at times, nonlinear hardening trends are seen, particularly in the 0.1″ cut and no-cut systems when testing harmonically. Each of the central-cut systems displays nonlinear damping, with the amount of damping generally increasing as the central cut decreases in size. The effect of the central cut of the BARC system on the mode-switching ability of the system is negligible; however, mode switching takes place when comparing the central-cut configurations to the no-cut one. These results show the significance of accurately measuring the central-cut width and how geometric uncertainty may change the dynamical responses and nonlinear properties of the system.

Padilla, Christopher (ORCID:000900033446732X)↗
DOE OSTI2020

A predictive strain-gradient model with no undetermined constants or length scales

A general meso–scale (GM) crystal plasticity (CP) model was developed that accounts for lower-order (strain hardening) and higher-order (internal stress) effects of geometrically necessary dislocations (GNDs). It is predictive: no arbitrary parameters or length scales were invoked and no ad hoc numerical techniques were employed. It uses general stress field equations for GND content and a novel harmonization technique to enforce consistency of elastic long-range singular defect fields with applied elastic-plastic fields. The model facilitates implementation in commercial finite element programs without requiring special elements, special boundary conditions, or access to element shape functions. GM simulations confirmed, with improved accuracy, previously published predictions of the Hall-Petch effect, Bauschinger effect, and anelasticity. Previously unpredicted phenomena were also predicted: anelasticity and hysteresis for single Ta crystals and strain-hardening stagnation. The internal stresses (higher-order effect) dominate at large length scales, while at small length scales, the GND density hardening (lower-order effect) dominates. As a result, GM predicts that strain heterogeneity and consequent GND internal stresses are important factors in anelasticity.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Department of Energy Project DE-SC0012198: Probing Electron-Molecule Scattering with HHG: Theory and Experiment (Final Report)

The study of the motion of atoms in molecules is important to understanding many areas of physical and life sciences. Such motion occurs on many different times scales, with electronic motion occurring on a sub-femtosecond time scale, and simple vibrational motion in tens to hundreds of femtoseconds. One way to follow such processes in real time is by the use of shortpulsed lasers, and in particular by studying time-resolved photoionization and the related process of high-harmonic generation (HHG). Thus there has been much effort to develop the tools necessary to probe molecular systems using short pulse lasers and understanding the sensitivity of the different possible probes to the time dependent geometric structure as well as the electronic structure of molecules. Our research has particularly focused on the connection between high-field processes and the more traditional weak field photoionization processes. Strong field and weak field processes can be connected through models that involve the same matrix elements. We have demonstrated in our study of HHG from SF 6 that the spectrum is sensitive to the interplay between the angular dependence of the ionization step and recombination step. In our study of rescattering spectroscopy, we have shown that with a combination of experiment and theory, we can use this high-field spectroscopy to determine molecular structure in molecules such as C 2 H 4 . We have also developed new computational tools based on overset grids to enable studies on larger molecular systems which use much more robust numerical approaches so that the resulting code can be a tool that non-specialists can use to study related systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Harmonic Infrared and Raman Spectra in Molecular Environments Using the Polarizable Embedding Model

We present a fully analytic approach to calculate infrared (IR) and Raman spectra of molecules embedded in complex molecular environments modeled using the fragment-based polarizable embedding (PE) model. We provide the theory for the calculation of analytic second-order geometric derivatives of molecular energies and first-order geometric derivatives of electric dipole moments and dipole–dipole polarizabilities within the PE model. The derivatives are implemented using a general open-ended response theory framework, thus allowing for an extension to higher-order derivatives. The embedding-potential parameters used to describe the environment in the PE model are derived through first-principles calculations, thus allowing a wide variety of systems to be modeled, including solvents, proteins, and other large and complex molecular environments. Here, we present proof-of-principle calculations of IR and Raman spectra of acetone in different solvents. This work is an important step toward calculating accurate vibrational spectra of molecules embedded in realistic environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electric field reversals resulting from voltage waveform tailoring in Ar/O 2 capacitively coupled plasmas sustained in asymmetric systems

The etching of nanometer scale high-aspect-ratio (HAR) features into dielectric materials in low pressure radio frequency excited plasmas is often accompanied by charge accumulation inside the features which can slow etching rates and produce distortions such as twisting. The intra feature charging is at least partially produced by differences in electron and ion energy and angular distributions (EADs). Positive ions, accelerated to high energies having narrow angular spreads by the sheath electric field, can penetrate deeply into HAR features. Electrons typically arrive at the wafer with nearly thermal and isotropic distributions and do not penetrate deeply into HAR features. These disparities lead to differential charging of the inside of the feature, which can lead to reductions in etch rate and feature distortion due to ion deflection. With in-creasing aspect ratio of features, charging challenges are expected to continue for the foreseeable future. In this work, the use of tailored voltage waveforms in geometrically asymmetric capacitively coupled plasmas sustained in Ar/O 2 at 40 mTorr was computationally investigated with the goal of shaping the EAD of electrons incident onto the substrate to address differential charging. The tailored waveform consisted of a sinusoidal wave and its higher harmonics with a fundamental frequency of 1 MHz. Further, we found that electric field reversals in the sheath and presheath can occur during the anodic portion of the cycle. The electric field reversal increases the energy and decreases the angular spread of electrons incident onto the substrate. The magnitude of the electric field reversal can be controlled by the phase angle of the even harmonics and the gas composition. Due to its electronegative nature, increasing mole fractions of O 2 impedes electron transport to the surface which further increases the electric field reversal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Experimental realization of linearly polarized x-ray detected ferromagnetic resonance

We present the first theoretical and experimental evidence of time-resolved dynamic x-ray magnetic linear dichroism (XMLD) measurements of GHz magnetic precessions driven by ferromagnetic resonance in both metallic and insulating thin films. Our findings show a dynamic XMLD in both ferromagnetic Ni 80 Fe 20 and ferrimagnetic Ni 0.65 Zn 0.35 Al 0.8 Fe 1.2 O 4 for different measurement geometries and linear polarizations. A detailed analysis of the observed signals reveals the importance of separating different harmonic components in the dynamic signal in order to identify the XMLD response without the influence of competing contributions. In particular, RF magnetic resonance elicits a large dynamic XMLD response at the fundamental frequency under experimental geometries with oblique x-ray polarization. The geometric range and experimental sensitivity can be improved by isolating the 2ω Fourier component of the dynamic response. These results illustrate the potential of dynamic XMLD and represent a milestone accomplishment toward the study of GHz spin dynamics in systems beyond ferromagnetic order.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Plasmonic nanoarcs: a versatile platform with tunable localized surface plasmon resonances in octave intervals

The tunability of the longitudinal localized surface plasmon resonances (LSPRs) of metallic nanoarcs is demonstrated with key relationships identified between geometric parameters of the arcs and their resonances in the infrared. The wavelength of the LSPRs is tuned by the mid-arc length of the nanoarc. The ratio between the attenuation of the fundamental and second order LSPRs is governed by the nanoarc central angle. Beneficial for plasmonic enhancement of harmonic generation, these two resonances can be tuned independently to obtain octave intervals through the design of a non-uniform arc-width profile. Because the character of the fundamental LSPR mode in nanoarcs combines an electric and a magnetic dipole, plasmonic nanoarcs with tunable resonances can serve as versatile building blocks for chiroptical and nonlinear optical devices.

42 ENGINEERING↗
DOE OSTI2025

Geometric control of hyperbolic exciton-polariton condensate dimers

Coupled many-body quantum systems exhibit rich emergent physics with diverse stationary and dynamical behaviours. By engineering platforms with tunable and distinct coupling mechanisms, new insights emerge into the collective behaviour of coupled many body systems. Particles can be exchanged via evanescent or ballistic coupling: the former, based on proximity, yields large spectral splitting, while the latter requires strict phase-matching, analogous to phase-coupled harmonic oscillators and has a smaller impact on the energy landscape. We demonstrate an all-optically tunable quantum fluid dimer based on exciton-polariton condensates in a photonic crystal waveguide with hyperbolic (saddle-like) dispersion. Varying the dimer’s angle relative to the grating tunes the coupling from evanescent to ballistic. We directly observe spectral features and mass flow shaped by the saddle dispersion. This work highlights photonic crystals as powerful platforms to explore condensed matter phenomena lying at the interface between delay-coupled nonlinear oscillators and tight binding physics.

Georgakilas, Ioannis [IBM Research-Zurich, Rüschli↗
DOE OSTI2021

Physics of the Inverted Harmonic Oscillator: From the lowest Landau level to event horizons

In this work, we present the inverted harmonic oscillator (IHO) Hamiltonian as a paradigm to understand the quantum mechanics of scattering and time-decay in a diverse set of physical systems. As one of the generators of area preserving transformations, the IHO Hamiltonian can be studied as a dilatation generator, squeeze generator, a Lorentz boost generator, or a scattering potential. In establishing these different forms, we demonstrate the physics of the IHO that underlies phenomena as disparate as the Hawking–Unruh effect and scattering in the lowest Landau level (LLL) in quantum Hall systems. We derive the emergence of the IHO Hamiltonian in the LLL in a gauge invariant way and show its exact parallels with the Rindler Hamiltonian that describes quantum mechanics near event horizons. This approach of studying distinct physical systems with symmetries described by isomorphic Lie algebras through the emergent IHO Hamiltonian enables us to reinterpret geometric response in the lowest Landau level in terms of relativistic effects such as Wigner rotation. Further, the analytic scattering matrix of the IHO points to the existence of quasinormal modes (QNMs) in the spectrum, which have quantized time-decay rates. We present a way to access these QNMs through wave packet scattering, thus proposing a novel effect in quantum Hall point contact geometries that parallels those found in black holes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Aerodynamic-whistles-based ultrasonic tone generators for bat deterrence

Novel ultrasonic bat deterrents based on aerodynamic whistles are proposed and investigated experimentally and numerically for their ability to generate ultrasound. The baseline deterrent, a single-whistle design inspired by Beeken [“Fluid ultrasonic generator,” U.S. patent 3,432,804 (1969)], is examined first. It consists of two resonating cavities/chambers. The whistle is “powered” by a regulated high-pressure air supply, and the performance of the whistle is examined for a range of supply pressures. Far-field acoustic measurements in the 20 Hz–50 kHz frequency range are made in an anechoic chamber. The noise measurements are supplemented with two- and three-dimensional unsteady Reynolds-averaged Navier–Stokes (uRANS) simulations to investigate the mechanisms of ultrasound generation. The Ffowcs Williams–Hawkings acoustic analogy is used with the three-dimensional uRANS results to predict the far-field radiation. The far-field acoustic predictions are in good agreement with the measurements in the anechoic chamber. The peak frequency (fundamental) of the radiated ultrasound of the baseline deterrent is approximately 23 kHz. Harmonics and a sub-harmonic of the fundamental tone are also observed. The numerical simulations show that the two resonating chambers of the baseline deterrent operate out-of-phase and Helmholtz resonance determines the whistling frequency over the range of supply air pressure considered. A six-whistle deterrent targeting a broad spectral coverage in the 20–50 kHz frequency range is designed, fabricated, and tested in the anechoic chamber. Each whistle in the deterrent is obtained by geometrically scaling the baseline whistle. Measurements show that the six-whistle ultrasound deterrent generates ultrasound with six dominant peaks in the designed frequency range when the supply air pressure exceeds 5 psig. The proposed ultrasound devices can be used for a variety of purposes including bat deterrence at wind turbines.

42 ENGINEERING↗
DOE OSTI2019

An integrated analytical and experimental study of contact acoustic nonlinearity at rough interfaces of fatigue cracks

This paper presents an analytical model that describes the relationship between interface stiffness and separation of rough interfaces such as fatigue cracks. The contact acoustic nonlinearity at the interface is simulated by a quasi-static model based on Hertzian contact theory. The model is validated using the results of dynamic acoustoelastic testing (DAET) with a Rayleigh wave probe on fatigue cracks in two aluminum alloy samples. One novel aspect of this work is that all the required geometrical parameters for the model are acquired directly from the aperture profile of real cracks extracted from their scanning electron microscopy (SEM) images. Also, the separation of the crack faces during dynamic perturbation is independently measured using a 3D laser Doppler vibrometer (LDV). In addition, using DAET allows for an unprecedented direct comparison between experimental and analytical results. Overall, this is because unlike conventional nonlinear ultrasonic tests that are based on measuring the amplitude of higher harmonics, DAET outputs directly the strain-dependency of transmission and time delay of ultrasonic waves propagating across the interface. The model is found in good qualitative agreement with the experimental results, although the predictions tend to underestimate the variation of transmission coefficient and time delay. We conduct a sensitivity analysis to investigate the influence of different assumptions and simplifications on model predictions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tests of the DFT Ladder for the Fulminic Acid Challenge

Properties of the historically pivotal fulminic acid (HCNO) molecule have been computed with a panoply of 473 density functionals of all varieties, providing a snapshot of the performance of contemporary density functional theory (DFT) for a challenging chemical system. Exhaustive tabulations and statistical analyses have been carried out for geometric parameters, vibrational frequencies, barriers to linearity, and the HCN–O dissociation energy. As the DFT ladder is climbed, confusion rather than consensus ensues regarding the details of the distinctive, extremely flat H–C–N bending potential of fulminic acid and whether the equilibrium structure is linear or bent. While high-ranking DFT functionals produce the smallest errors for the HCN + O( 3 P) → HCNO reaction energy, lower rungs emerge as the best performers for many of the bond distances and harmonic vibrational frequencies. This research shows that the current DFT zoo of approximations does not constitute a transparent ladder of increasingly accurate methods that consistently converges on definitive predictions for various properties of HCNO. Additional analyses are performed on the side effects of popular dispersion corrections on the covalently bonded properties and thermochemistry of HCNO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Nonlinear dynamics, bifurcations, and multi-stability in a vibro-impact system with geometric and multi-segmented freeplay nonlinearities

Freeplay is a common type of piecewise-smooth nonlinearity in dynamical systems, and it can cause discontinuity-induced bifurcations and other behaviors that may bring about undesirable and potentially damaging responses. Prior research has focused on piecewise-smooth systems with two or three distinct regions, but less attention is devoted to systems with more regions (i.e., multi-segmented systems). In this work, numerical analysis is performed on a dynamical system with multi-segmented freeplay, in which there are four stiffness transitions and five distinct regions in the phase space. Here, the effects of the multi-segmented parameters are studied through bifurcation diagram evolution along with induced multi-stable behavior and different bifurcations. These phenomena are interrogated through various tools, such as harmonic balance, basins of attraction, phase planes, and Poincaré section analysis. Results show that among the three multi-segmented parameters, the asymmetry has the strongest effect on the response of the system.

42 ENGINEERING↗
DOE OSTI2019

High harmonic generation spectroscopy via orbital angular momentum

We present an experimental technique using orbital angular momentum (OAM) in a fundamental laser field to drive high harmonic generation (HHG). The mixing of beams with different OAM allows us to generate two laser foci tightly spaced which generate harmonics that interfere in the far field. Thus, this technique is an OAM based in situ HHG interferometric spectroscopic method. With this tool, we measure the phase and amplitude of the angle dependent multiorbital HHG emission in molecular nitrogen

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Characterization of nonlinear ultrasonic waves behavior while interacting with poor interlayer bonds in large-scale additive manufactured materials

Over the past decades, researchers have developed several nonlinear ultrasonic techniques for quality control of materials commonly used in different applications. Owing to the superior sensitivity of nonlinear ultrasound waves to small defects such as micro-cracks, their applicability in different nondestructive testing (NDT) problems has been investigated in numerous studies. These studies utilize frequency domain analysis to detect the generation of higher harmonics because of the formation of defects in the inspected medium. Frequency domain analysis based on the Fourier transform is a significant approach used in linear systems; however, it may not perform adequately on nonlinear systems. Hence, studies on nonlinear dynamics and physics consider analyzing systems' behavior in the phase-space domain. In contrast to the frequency domain analysis, which can result in information loss, analysis in the phase-space domain retains all the information regarding a system's states. Here, we investigate the nonlinearities induced by poor interlayer bonding in polymer-based additive manufactured parts in the phase-space domain. It is convenient to characterize the nonlinearity in the phase-space domain because it provides a geometrical representation of a system's states. Two types of low quality interlayer bond are considered. The first type is simulated artificially while the second type is manufactured by reducing the bond quality during the printing process. The analysis verified that the received ultrasonic signals exhibit classical nonlinear behavior in the phase-space domain while interacting with simulated poor interlayer bonds. In addition, the results showed that the behavior of ultrasonic waves is amplitude-dependent and evolves into models that have not been previously reported. Furthermore, Largest Lyapunov Exponent (LLE) is used to quantify the behavior of nonlinear ultrasonic waves while interacting with poor interlayer bonds. Using LLE, it was observed that the divergence rate of the phase-space trajectories depends on the amplitude of the excitation. This observation quantitatively proves that nonlinear behavior of ultrasound while interacting with poor interlayer bonds can be amplitude-dependent. The results of both simulated and inherent poor interlayer bond cases showed that LLE can be used as a reliable quantitative damage-sensitive feature to detect and potentially characterize weak bonds, which are difficult to detect using conventional approaches. Additionally, the reported results in the phase-space domain provide a basis for proposing a new mathematical model for ultrasonic waves interacting with poor interlayer bonds.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Onset of High-Harmonic Fast Wave Propagation in Annulus Geometry

Previous experiments on NSTX have reported high-harmonic fast wave (HHFW) power losses in the scrape-off layer (SOL), with dependencies on the wave parallel wavenumber, plasma density, and magnetic field. This study presents an analysis of HHFW propagation in the SOL plasma, focusing on parasitic coupling to the waveguide mode bounded by the steep gradient pedestal and the outer wall boundary. The analytic and finite element wave models are discussed using a 2D annulus geometry, which serves as a simplified representation of the NSTX-U plasma. The model shows that a minimum radial gap width is required to support wave propagation, analogous to the higher-order modes in coaxial geometries. The impact of several factors, including gap width, wave parallel phasing, and magnetic field strength, on parasitic wave coupling is examined, highlighting the role of the geometric dimension in relation to the wave perpendicular wavelength. The findings suggest that controlling the edge/SOL density profile (gap control) is crucial for mitigating parasitic coupling when the density in front of the antenna exceeds the density cutoff.

Baek, Seung-Gyou [Massachusetts Inst. of Technolog↗
DOE OSTI2021

Computational study of Li 3 BO 3 and Li 3 BN 2 II: Stability analysis of pure phases and of model interfaces with Li anodes

Both Li 3 BO 3 and Li 3 BN 2 materials have promising properties for use in all solid-state batteries and other technologies dependent on electrolytes with significant ionic conductivity. As the second of a two-part study, the structural properties of Li 3 BO 3 and three reported phases of Li 3 BN 2 are investigated using first-principles modeling techniques. For alpha- Li 3 BN 2 , the tetragonal P4 2 / mnm structure reported in the literature is found to be unstable as evidenced by imaginary phonon modes near the M point of its Brillouin zone. Our simulations within the harmonic approximation suggest that the real α phase has the orthorhombic space group symmetry Pmmn formed with twice as many formula units and tiny adjustments of the equivalent lattice parameters and fractional coordinates. Extending the analysis of the Pmmn α- Li 3 BN 2 structure to the quasiharmonic approximation improves the agreement between the room-temperature x-ray pattern reported in the literature and the corresponding simulation results. In anticipation of the use of the monoclinic phases of Li 3 BO 3 and Li 3 BN 2 in Li ion conducting applications, chemical stability is investigated in terms of free-energy differences of possible decomposition and Li reaction processes, finding encouraging results. As further investigations of Li 3 BO 3 and β- Li 3 BN 2 as electrolyte or coating materials, particularly for use with Li metal anodes, idealized electrolyte/Li interfaces were investigated in terms of their geometric, energetic, and electronic properties. The results find the electrolyte/Li interfaces to be quite favorable, perhaps comparable to the pioneering LiPON/Li system.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Near-field radiative heat transfer between irregularly shaped dielectric particles modeled with the discrete system Green's function method

Near-field radiative heat transfer (NFRHT) between irregularly shaped dielectric particles made of SiO 2 and morphology characterized by Gaussian random spheres is studied. Particles are modeled using the discrete system Green's function (DSGF) approach, which is a volume integral numerical method based on fluctuational electrodynamics. This method is applicable to finite, three-dimensional objects, and all system interactions are defined independent of thermal excitation by a generalized system Green's function. The DSGF method is deemed suitable to model NFRHT between irregularly shaped particles after verification against the analytical solution for chains of two and three SiO 2 spheres. The NFRHT results reveal that geometric irregularity in particles leads to a reduction of the total conductance from that of comparable perfect spheres at vacuum separation distances smaller than the particle size, a regime in which NFRHT is a surface phenomenon. At vacuum separation distances larger than the particle size, NFRHT becomes a volumetric process, and the total conductance between irregularly shaped particles converges to that of comparable perfect spheres. Spectral analysis reveals, however, that particle irregularity leads to damping and broadening of resonances at all separation distances, thereby highlighting the importance of the DSGF method for spectral engineering in the near field. The reduced spectral coherence when particle size is larger than the vacuum separation distance is attributed to coupling of surface phonon-polaritons within the randomly generated, distorted particle features. For particle size smaller than the vacuum separation distance, resonance broadening and damping are linked with the multiple localized surface phonon modes supported by the composite spherical harmonic morphologies of the Gaussian random spheres. In conclusion, this paper has direct implications for thermal management of packed particle systems, with applications in radiative property control, electronics, energy conversion, and nanomanufacturing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗