Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geochemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reactive transport modeling of the Aquifer Thermal Energy Storage (ATES) system at Stockton University, New Jersey during seasonal operations

Hydrogeochemical processes associated with Aquifer Thermal Energy Storage (ATES) operations can often impact the system performance owing to mineral precipitation either at the wellbore or in the aquifer owing to changes in temperature and fluid disequilibria. Although failure of ATES systems due to mineral precipitation ("fouling") is common, predictive reactive-transport models have rarely been applied to plan their design and operation. Here, the objective of this study is to develop a reactive-transport model by coupling thermal, hydrological, and chemical (THC) processes to evaluate effects of introduced atmospheric oxygen on water chemistry, mineral precipitation/dissolution, porosity, and permeability changes associated with an ATES system at Stockton University (New Jersey, USA). The THC model builds on a Thermal-Hydrological-Mechanical (THM) model of the site that evaluated system failure owing to possible fracturing in the caprock or around the wellbore. The causes of the system failure are not known – potential causes include hydraulic fracturing owing to elevated pump pressures that took place, a flow pathway created by one of the boreholes, or a pre-existing natural hydrologic connection between the upper unconfined aquifer and the ATES aquifer, any of which could have led to oxygenated water entering the reservoir and causing the observed Fe-oxide fouling on well screens. The THC model is used to evaluate some of the hypotheses and observations regarding system failure owing to geochemical processes. The reactive-transport code TOUGHREACT V4 was used to model the THC processes during seasonal heating and cooling operations at the Stockton ATES site over 6 years of operation. In the THC simulations, the primary effects on geochemistry were observed when the injection water is saturated with atmospheric oxygen. Simulations show greater precipitation of goethite near the cold wells as compared to the warm wells. Although volume fractions of Fe-hydroxides were relatively small, the model was aimed at processes in the aquifer at the scale of meters and larger rather than at the scale of mm or cm (i.e., a well screen). Kaolinite is the dominant precipitating phase, also around the cold wells. Illite dissolves near the cold wells and precipitates near the warm wells. There is a net decrease in the porosity near the cold wells and increase near the warm wells, although a slight amount of thermal contraction near the cold wells and expansion near the warm wells is responsible for a significant proportion of the porosity change. Owing to the coarse discretization of the numerical grid near the wells (compared to the screen thickness) the magnitude of permeability changes at the wellbore are likely underestimated. The reactive transport model in this study can be used for characterization of aquifers, optimizing the operational parameters (temperature, pressure, pH etc.), and planning of mitigation strategies for ATES systems.

15 GEOTHERMAL ENERGY↗
DOE OSTI2026

Reservoir-scale model of geologic hydrogen production from serpentinization: Cyclic injection in a dual-permeability fracture-matrix system

Geologic hydrogen (GeoH 2 ) from serpentinization is a promising low-carbon resource, but its reservoir-scale behavior remains poorly understood. We develop a dual-permeability reactive transport model for an injector–producer well pair in ultramafic rock that couples multiphase flow, heat transfer, geochemistry, and porosity–permeability evolution. Here, the model is calibrated to olivine flow-through experiments and upscaled to two-year long simulations with continuous injection and cyclic injection with shut-in-to-injection ratios (SIR = 1, 0.5, 0.1). Olivine reacts along high-flux pathways to form lizardite and magnetite, increasing pH; H 2 (aq) and H 2 (g) peak early and then decline as exsolution and advective export outpace local generation. Continuous injection yields the highest cumulative H 2 but the lowest water-use efficiency (1.138 x 10 –6 mol/kgw). Cyclic injection increases this ratio to 1.35 x 10 –6 , 1.377 x 10 –6 , and 1.182 x 10 –6 mol/kgw for SIR = 1, 0.5, and 0.1, respectively; SIR = 0.5 provides a ~20% improvement over continuous injection and the best compromise for pilot design.

08 HYDROGEN↗
DOE OSTI2024

Comparison of volatiles evolving from selected highland and mare lunar regolith simulants during vacuum sintering

Volatiles evolving from JSC-1A, NU-LHT-4M and CSM-LHT-1G lunar regolith simulants during in vacuo thermal processing were analyzed using mass spectrometry as a function of temperature. Two high-fidelity simulants, JSC-1A (mare) and NU-LHT-4M (highland), were compared to a newly developed CSM-LHT-1G highland simulant, modified to closely match lunar geochemistry. Large autogenous gas loads were observed for all investigated materials. Mineralogical knowledge was used to identify and attribute individual volatile species to reacting, transforming, or decomposing constituents (hydrates, carbonates, sulfates, sulfides, clays, etc.) of the respective regolith simulant in the self-generated gas environment. Cumulative mass losses for individual simulant components as a function of temperature were quantified using mass spectrometry in conjunction with thermogravimetric analysis. Investigation of the four components of CSM-LHT-1G – anorthosite, basalt, augite, and glass – aided the attribution of volatile species to specific compounds and their respective sources. The results showed significant decomposition of non-lunar phases present in the man-made regolith simulants below the typical glass crystallization temperatures, which paves the way to devising methods for enhancing the fidelity of the simulants. Finally, high gas loads and corrosive gases (HF and HCl) were recognized as potential hazards, pertaining to the development of large testbed facilities.

42 ENGINEERING↗
DOE OSTI2024

Detecting ecological signatures of long-term human activity across an elevational gradient in the Šumava Mountains, Central Europe

Central European mountains, including the Šumava Mountains located along the Czechia/Germany border, have a long and rich anthropogenic history. Yet, documenting prehistoric human impact in Central European mountain environments remains a challenge because of the need to disentangle climate and human-caused responses in terrestrial systems. Here, we present the first reconstructed water table depths (WTDs) from two sites, Pěkná and Blatenská slať, located in the Šumava Mountains. We compare these local WTD records with new and published pollen, non-pollen palynomorphs (NPPs), plant macrofossils, geochemistry and archeological records to investigate how changes in local hydrology and human activities impacted forest succession and fire activity throughout the Holocene across an elevational gradient. Using a generalized additive model, our results suggest that changes in forest succession and fire activity have been primarily caused by climate throughout the Holocene. However, humans have been utilizing mountain environments and their resources continuously since ∼4600 cal yr BP, thus playing a secondary role in modifying forest succession to increase resources beneficial to both humans and grazers. Over the last 1000 years, we provide evidence of directly observed human-caused modifications to the landscape. These results contribute to a growing body of literature illustrating human activities and landscape modifications in Central European mountains.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Understanding Adsorption and Reactions at Aqueous Oxide Interfaces with Neural Network Potential Molecular Dynamics

Chemical processes at metal oxide−water interfaces are of central importance in geochemistry, biology, and energy technologies. A better understanding of these processes would allow us to make a significant step toward optimizing and controlling them, which could in turn lead to broader impacts. Computational modeling is indispensable to accomplishing this task because complexity and disorder often make it difficult to extract atomistic information from experiments. Balancing computational cost and accuracy, simulation schemes based on efficient machine learning representations of the potential energy surface (PES) predicted by ab initio calculations have become increasingly popular over the past decade. In particular, several studies have demonstrated the ability of machine learning models to accurately reproduce the complex ab initio PESs of aqueous oxide interfaces, allowing simulations of systems and processes that are not accessible with ab initio methods. In this Account, we review our recent efforts to understand adsorption processes and reactions at aqueous oxide interfaces using deep potential molecular dynamics (DPMD), a simulation scheme employing deep neural networks (DNNs), which has proven to be quite successful in accurately describing many different systems in the condensed phase. After summarizing the DPMD methodology, we first review our work on the acid−base chemistry of oxide surfaces in contact with water, a fundamental characteristic that controls proton transfer and surface charge at the interface. We focus on the aqueous interface of rutile IrO 2 , an oxide material thus far considered the best catalyst for the oxygen evolution reaction (OER). We show that this interface is characterized by a large fraction of dissociated water and a strong Brønsted acidity of the surface sites, in good agreement with the experimentally measured value of the point of zero proton charge. In our second example, we investigate how the adsorption of organic species from ambient air or water affects the structure and wettability of the aqueous interfaces of TiO 2 , a prototypical photocatalytic material. This is a question that is relevant to understanding the UV-induced hydrophilicity of TiO 2 surfaces, a property at the basis of self-cleaning windows and related applications. Specifically focusing on formic and acetic acids, the two most common atmospheric organic acids, our simulations reveal that these acids control the wettability of TiO 2 largely through acid−base chemistry at the interface rather than chemisorption on the oxide surface, a finding that could help improve the design of self-cleaning surfaces and photocatalytic devices. Finally, we review our recent study of methanol at TiO 2 −water interfaces, a system whose interest is largely motivated by the role of methanol in enhancing photocatalytic hydrogen evolution on TiO 2 . Our simulations provide mechanistic insights into the coupled roles of the organic adsorbate and water at the TiO 2 interface, with implications for how methanol enhances the activity of H 2 evolution.

adsorption↗
DOE OSTI2026

Calibration-free analysis of Li isotope ratios using laser ablation and laser absorption spectroscopy

We introduce a rapid, calibration-free, all-optical method for high-precision lithium isotope ratio measurements in solid materials using laser ablation combined with tunable laser absorption spectroscopy. A new asynchronous acquisition method is used to acquire time-resolved, high-resolution spectra of the 6Li and 7Li D1 and D2 transitions near 671 nm. Isotope ratios and atomic column densities are extracted from measured spectra via a physics-based fitting model including hyperfine structure. Under 1 Torr air, spectra recorded = 0.75 ms after plasma onset exhibit narrow linewidths corresponding to Doppler temperatures = 400 K, enabling resolution of the isotope peaks with high signal-to-noise ratios. Analysis of LiAlO2 samples with varying 6Li:7Li ratios demonstrates isotopic precisions of 0.6–1.7% for spectra acquired in 30 s. Isotope ratios determined from the spectral fits show accuracy within –0.3% to –1.7% of reference ICP-MS measurements without requiring calibration to external standards. By eliminating sample preparation and enabling spatially resolved isotopic mapping, this method offers a rapid analysis approach to lithium isotope determination in solid materials relevant to nuclear energy, safeguards, and geochemistry.

Phillips, Mark C.↗
DOE OSTI2025

Postfire Biogeochemical Processes: Implications to Source Water Quality in Fire-Influenced Watersheds

Forested watersheds are instrumental in providing purified and reliable water to millions of people worldwide. The changing climate has increased the frequency and severity of global fire events. Forested watersheds and their ecosystem functions are greatly disrupted during fire activity. Postfire concerns in forested watersheds include unpredictable and potentially simultaneous alterations in source water quality and hydro-biogeochemical processes. Here, the degree of fire severity can complexly modify water quality through the production of fire-transformed constituents on the burned forest floor (i.e., nutrients, metal(loid)s, dissolved organic matter, and the formation of disinfection byproducts). Correspondingly, fire severity and postfire rainfall patterns can refine hydro-biogeochemical processes that influence the transport of the fire-transformed constituents (i.e., vegetation function, soil structure, hydrological pathways, and microbial communities). Postfire alterations to water quality and hydro-biogeochemical processes introduce further complexity with varying temporal influence, which ranges from months to decades. As postfire water quality and watershed response research progresses, it is essential to homogenize interdisciplinary expertise to bridge knowledge gaps between fields ranging from forest ecology, hydrology, microbiology, and geochemistry. A multidisciplinary approach in wildfire research will facilitate a comprehensive perception of the diverse water quality risks associated with fire activity and mitigate fire concerns on a global level.

Disinfection Byproducts↗
DOE OSTI2026

Pyrite (001) Interface Chemistry is Controlled by a Sulfoxy Termination

Pyrite (FeS 2 ) is the most common sulfide mineral on Earth, forming through inorganic reactions in the crust and oceanic hydrothermal systems and via microbially driven processes in anaerobic sediments. The pyrite–water interface is the site of a wide range of adsorption and reaction processes in Earth systems including oxidation that dramatically affects the geochemistry of surface waters and influences global carbon and oxygen cycles. Mechanistic geochemical models of pyrite interfacial reactivity, however, are limited by the lack of experimentally derived atomistic structures of the reduced and reacting surfaces. Here, in this work, we reveal the atomic-scale structure of the pyrite (001)-water interface that forms at very low oxygen partial pressures, relevant to suboxic environments in Earth. The interface structure and surface speciation were obtained using the crystal truncation rod method supported by ambient-pressure photoelectron spectroscopy and density functional theory calculations. The surface is dominantly composed of disulfide groups bound to a single oxygen atom, forming a sulfoxy group that has no known molecular or bulk mineral analog. This surface is interpreted as the first step in the oxidative dissolution of pyrite. The sulfoxy group is readily protonated through surface acid–base reactions that alter the structure of interfacial water and the free energy of interfacial reactions. Surface iron sites are not oxidized. Surprisingly, this interface can likely develop in equilibrium with bulk pyrite in some reducing and acidic solutions. This termination is therefore likely representative of pyrite surfaces under a vast range of experimental, industrial and Earth conditions.

oxidation↗
DOE OSTI2026

Surface Hydroxyls of Imogolite Nanotubes Drive Distinct Structures and Mobility Differentiation of Nanoconfined Water

Abstract Nanoconfined fluids, particularly water, govern subsurface geochemistry, yet the molecular-level mechanisms by which mineral surfaces dictate confined water structure and mobility remain poorly resolved. Here, we combine solution- and solid-state proton (1H) NMR spectroscopy, NMR relaxometry, modulated-gradient spin–echo (MGSE) NMR diffusometry, infrared spectroscopy, and molecular dynamics simulations to demonstrate that surface hydroxyls drive the structural and dynamic differentiation of water in imogolite nanotubes. In saturated suspensions, we observe the coexistence of distinct water 1H environments, each exhibiting significantly reduced mobility, which we attribute to strong interactions with the imogolite surfaces. As more mobile water is removed, long-range water diffusivity in the fibrous solid samples slows to 1.6 × 10–10 m2·s–1 while local fluctuations increase to 3.4 × 10–8 m2·s–1, indicating a significant increase in molecular restriction through surface interactions. Together, our experiments reveal three coexisting populations with varied structures and mobilities, all distinct from liquid bulk water. We resolve a persistent solid-like interfacial layer strongly bound to surface hydroxyls, characterized by an unusually short T2 (<1 ms), and a very close effective 1H–1H distance of ∼1.55 Å between water and the inner-surface silanol group. An inner-core population occupying the inner cavity exhibits an intermediate dynamic regime with restricted axial diffusion, while outer-surface water associated with aluminum hydroxyls retains relatively higher mobility. These results experimentally substantiate a hierarchy of water populations in imogolite and show how surface chemistry dictates the structures and dynamics of confined water.

Fleming, Xander B. [Earth and Environmental Scienc↗
DOE OSTI2024

Estimating Interplanetary Magnetic Field Conditions at Mercury's Orbit From MESSENGER Magnetosheath Observations Using a Feedforward Neural Network

Abstract Mercury's small magnetosphere is embedded in the dynamic and intense solar wind environment characteristic of the inner heliosphere. Both the magnitude and orientation of the interplanetary magnetic field (IMF) significantly influence the solar wind‐magnetospheric interaction at Mercury, driving phenomena such as magnetic reconnection. The MErcury Surface, Space Environment, Geochemistry and Ranging (MESSENGER) spacecraft provided in‐situ magnetic field measurements of the solar wind, the magnetosheath, and the magnetosphere along each orbit. However, it is a challenge to directly assess the IMF's impact on Mercury's plasma environment due to the temporal separation between observations within the solar wind and the magnetosphere, especially in the absence of an upstream monitor. Here, we present a feedforward neural network (FNN) trained on a subset of magnetosheath observations to estimate the strength and orientation of the IMF upstream of the bow shock. Utilizing magnetosheath magnetic field, cylindrical spatial coordinates, and heliocentric distance measurements, the FNN predicts upstream IMF conditions with an score of 0.70 and mean averaged error of 5.3 nT, thereby greatly decreasing the temporal separation between IMF estimates and magnetospheric measurements throughout the MESSENGER mission. This approach yields IMF estimates for all magnetosheath data measured by MESSENGER, providing a useful tool for future investigations of the IMF impact on Mercury's magnetosphere. This method will be integrable with the dual‐spacecraft BepiColombo magnetosheath measurements, providing useful estimates of upstream IMF conditions particularly during the extended periods in which neither spacecraft sample the solar wind. Our results demonstrate the utility of machine learning techniques on advancing space science research.

Bowers, Charles F.↗
DOE OSTI2026

Constraining the Hydration of Clay Minerals and Abundances of Amorphous Phases in Gale Crater, Mars

Both water and organic matter are required for the development and persistence of life. Phyllosilicates (clay minerals) have high surface areas that easily sorb water and organic matter. The Curiosity rover has investigated several hundred meters of stratigraphy in Gale crater, including where clays were detected from orbit. Previous results have suggested that subsurface hydration is greatest in units with the most abundant clays, suggesting that these minerals may be hydrated. Organics have also been found throughout Gale crater. Smectites are the most common and abundant phyllosilicates in Gale crater samples and can expand and sorb water and organics in interlayer sites. The most common organic sorption processes on Earth typically involve water or hydroxyl, so hydrated phyllosilicates are good candidates for organic preservation. Using newly derived subsurface hydration results with previously published mineralogy and geochemistry, we derived modeled constraints on the abundances of hydrated amorphous phases, “excess” water, and “excess” cations. These “excess” phases are not accounted for by published crystalline phase abundances or by amorphous phases constrained here. We found correlations between smectites and both “excess” water and “excess” cation abundances, indicating that smectites in Gale crater are hydrated and that cation bridging could be a mechanism for sorption of organics. Our results also show the persistence of amorphous sulfates, opal-A, and volcanic or impact glass, which indicate low water-rock interactions. Increased abundances of sulfates and glass in stratigraphically higher samples may indicate lower water availability and environmental aridification during the time these units were being deposited.

58 GEOSCIENCES↗
DOE OSTI2024

Machine learning the electric field response of condensed phase systems using perturbed neural network potentials

Abstract The interaction of condensed phase systems with external electric fields is of major importance in a myriad of processes in nature and technology, ranging from the field-directed motion of cells (galvanotaxis), to geochemistry and the formation of ice phases on planets, to field-directed chemical catalysis and energy storage and conversion systems including supercapacitors, batteries and solar cells. Molecular simulation in the presence of electric fields would give important atomistic insight into these processes but applications of the most accurate methods such as ab-initio molecular dynamics (AIMD) are limited in scope by their computational expense. Here we introduce Perturbed Neural Network Potential Molecular Dynamics (PNNP MD) to push back the accessible time and length scales of such simulations. We demonstrate that important dielectric properties of liquid water including the field-induced relaxation dynamics, the dielectric constant and the field-dependent IR spectrum can be machine learned up to surprisingly high field strengths of about 0.2 V Å −1 without loss in accuracy when compared to ab-initio molecular dynamics. This is remarkable because, in contrast to most previous approaches, the two neural networks on which PNNP MD is based are exclusively trained on molecular configurations sampled from zero-field MD simulations, demonstrating that the networks not only interpolate but also reliably extrapolate the field response. PNNP MD is based on rigorous theory yet it is simple, general, modular, and systematically improvable allowing us to obtain atomistic insight into the interaction of a wide range of condensed phase systems with external electric fields.

Science & Technology - Other Topics↗
DOE OSTI2024

Atomic dynamics of electrified solid–liquid interfaces in liquid-cell TEM

Electrified solid–liquid interfaces (ESLIs) play a key role in various electrochemical processes relevant to energy, biology and geochemistry. The electron and mass transport at the electrified interfaces may result in structural modifications that markedly influence the reaction pathways. For example, electrocatalyst surface restructuring during reactions can substantially affect the catalysis mechanisms and reaction products. Despite its importance, direct probing the atomic dynamics of solid–liquid interfaces under electric biasing is challenging owing to the nature of being buried in liquid electrolytes and the limited spatial resolution of current techniques for in situ imaging through liquids. Here, with our development of advanced polymer electrochemical liquid cells for transmission electron microscopy (TEM), we are able to directly monitor the atomic dynamics of ESLIs during copper (Cu)-catalysed CO 2 electroreduction reactions (CO 2 ERs). Our observation reveals a fluctuating liquid-like amorphous interphase. It undergoes reversible crystalline–amorphous structural transformations and flows along the electrified Cu surface, thus mediating the crystalline Cu surface restructuring and mass loss through the interphase layer. Furthermore, the combination of real-time observation and theoretical calculations unveils an amorphization-mediated restructuring mechanism resulting from charge-activated surface reactions with the electrolyte. Our results open many opportunities to explore the atomic dynamics and its impact in broad systems involving ESLIs by taking advantage of the in situ imaging capability.

36 MATERIALS SCIENCE↗
DOE OSTI2025

UV-Vis spectrophotometric determination of rare earth elements (REE) speciation at near-neutral to alkaline pH. Part II: hydrolysis of Er from 25 to 75 °C

Aqueous speciation of rare earth elements (REE) controls their mobilization, fractionation, and enrichment in the natural waters. Geochemical modeling of their speciation is key to improve our understanding of the formation of economic mineral deposits, for developing mineral separation and mine tailing recovery technologies, and for characterizing the geochemistry of thermal water. However, our ability to predict the fate of REE in a wide pH and temperature range is limited by the scarcity of thermodynamic data for the REE hydroxyl complexes. In part I of this study (H. J. Han and A. P. Gysi, Dalton Trans., 2024, 53, 13129–13141), the optical properties of m-cresol purple (mCP) were determined using UV-Vis spectrophotometry between 25 and 75 °C in order to develop a method for deriving the hydrolysis constants of erbium (Er). Here, UV-Vis spectrophotometry experiments were conducted as a function of temperature between 35 and 75 °C to determine the hydrolysis of Er in near-neutral to alkaline solutions using mCP as an in situ pH color indicator. Here, the experiments were conducted with Er concentrations from 0 to ~0.253 mmol kg –1 in low ionic strength solutions (≤0.001 mol kg –1 ).

58 GEOSCIENCES↗
DOE OSTI2025

Detection of Br and I as atomic anions using liquid sampling – atmospheric pressure glow discharge/Orbitrap mass spectrometry

The quantification and determination of halogen isotope composition is essential in many fields including geochemistry and nuclear forensics. Detection of the halogen elements is commonly attempted with inductively coupled plasma mass spectrometry (ICP-MS) however, there are multiple challenges faced. Most significantly this includes very poor ionization efficiency and the potential for isobaric interferences from either matrix or plasma species. Thus, sensitivity and accuracy are often limiting issues. Here a liquid sampling-atmospheric pressure glow discharge (LS-APGD) ionization source is coupled with an ultrahigh resolution Orbitrap MS to perform halogen detection of bromine and iodine as initial analytes. This facilitates simple and sensitive detection of these elements as atomic anions from simple aqueous salt solutions. Collision-induced dissociation (CID) and higher-energy collisional dissociation (HCD) energies were optimized to produce the maximum response of Br − and I − . The LS-APGD conditions were optimized using a design of experiments (DOE) approach for Br − and I − concurrently. Response curves for Br − and I − solutions determined limit of detection (LOD) values of 50 pg and 5 pg, respectively, in 20 μL aliquots. The curves indicated response factors of 0.67 for 79 Br − and 0.90 for 127 I − . Br isotope ratios were determined with precision between 0.7 and 7.3% RSD, with the isotope ratios determined with precision 0.8% RSD at concentrations above the limit of quantification. Preliminary tests were conducted to evaluate the effect of different cations (Na + , K + , and Mg 2+ ) on Br − responses, with no discernible impacts observed on the halogen signal responses. This study demonstrates the potential use of the LS-APGD-Orbitrap-MS for the detection of multiple halogens while avoiding interferences, minimizing sample preparation, and overcoming ionization barriers.

Lang, Dehlia A. [Clemson University, SC (United St↗
DOE OSTI2024

Temporal covariation of island arc Sr isotopes and seawater chemistry over the past 2 billion years

The chemical compositions of island arc basalts (IAB) reflect contributions from the mantle as well as fluids and melts from the subducting slab. Addition of radiogenic seawater Sr to oceanic crust through hydrothermal alteration and subsequent subduction is often invoked to explain elevated 87 Sr/ 86 Sr signatures in modern IAB. However, changes in the 87 Sr/ 86 Sr of island arc magmatic rocks through time has not been investigated, limiting our understanding of the factors influencing the Sr budgets of arcs throughout Earth’s history. To address this, we compiled 87 Sr/ 86 Sr values from island arc magmatic rocks ranging in age from modern to Paleoproterozoic, only including data from island arc localities that best preserve initial magmatic 87 Sr/ 86 Sr. Median initial 87 Sr/ 86 Sr values are consistently elevated compared to depleted mantle 87 Sr/ 86 Sr over this period, indicating persistent enrichment in radiogenic Sr in island arcs. Moreover, the elevation in island arc 87 Sr/ 86 Sr relative to the depleted mantle is variable. A notable rise in island arc 87 Sr/ 86 Sr during the late Neoproterozoic coincides with a steep increase in seawater 87 Sr/ 86 Sr and Sr concentration. To investigate this potential connectivity, we modeled the 87 Sr/ 86 Sr of island arc magmas between 0 and 830 Ma with inputs of depleted mantle 87 Sr/ 86 Sr, seawater 87 Sr/ 86 Sr, and seawater Sr concentration. The model reproduces the overall trajectory of the compiled data. We interpret the observed temporal variation in island arc 87 Sr/ 86 Sr values and its close association with fluctuations in seawater chemistry as evidence that changes in marine geochemistry have strongly influenced the Sr isotopic record of island arc magmas over time.

Science & Technology - Other Topics↗
DOE OSTI2025

Elephant range and population, strontium isotopes, and genetics combine to give local-scale specificity to ivory hotspot tracking

We use Sr isotopes to increase the precision of DNA-based origin estimates of wildlife products. Population information is used to develop Sr isotope Elephant Polygons that are overlaid onto the region of origin identified by DNA assignment to determine the sources of seized ivory samples. Our approach is cognizant of isotope mixing due to isotope turnover within animals and also of the large home range of elephants or other mobile species. Genetic information from 3 different law enforcement ivory seizures suggests a region of origin confined to Kenya and Tanzania in eastern Africa. We determine characteristic 87 Sr/ 86 Sr ratios for each of 25 different Elephant Polygons within this region using analyses of more the 600 known-origin reference samples. Using both the 87 Sr/ 86 Sr ratios of the seized ivory samples and elephant population estimates from individual Elephant Polygons we find that at least 75 % of the samples likely came from a single Elephant Polygon which includes the Tsavo National Parks in Kenya and the Mkomazi National Park in Tanzania. A few samples may have come from other regions, most likely from Tanzania. This study illustrates the value of combining genetics, isotope geochemistry, and population surveys in wildlife forensics studies.

Africa↗