Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GRINDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Data from Impact of Fractionation Process on the Technical and Economic Viability of Corn Dry Grind Ethanol Process

Use of corn fractionation techniques in dry grind process increases the number of coproducts, enhances their quality and value, generates feedstock for cellulosic ethanol production and potentially increases profitability of the dry grind process. The aim of this study is to develop process simulation models for eight different wet and dry corn fractionation techniques recovering germ, pericarp fiber and/or endosperm fiber, and evaluate their techno-economic feasibility at the commercial scale. Ethanol yields for plants processing 1113.11 MT corn/day were 37.2 to 40 million gal for wet fractionation and 37.3 to 31.3 million gal for dry fractionation, compared to 40.2 million gal for conventional dry grind process. Capital costs were higher for wet fractionation processes ($92.85 to $97.38 million) in comparison to conventional ($83.95 million) and dry fractionation ($83.35 to $84.91 million) processes. Due to high value of coproducts, ethanol production costs in most fractionation processes ($1.29 to $1.35/gal) were lower than conventional ($1.36/gal) process. Internal rate of return for most of the wet (6.88 to 8.58%) and dry fractionation (6.45 to 7.04%) processes was higher than the conventional (6.39%) process. Wet fractionation process designed for germ and pericarp fiber recovery was most profitable among the processes.

Conversion↗
DOE OSTI2010

Online monitoring of a belt grinding process by using a light scattering method

Industrially ground surfaces often have a characteristic surface topography known as chatter marks. The surface finishing is mainly monitored by optical measurement techniques. In this work, the monitoring of an industrial belt grinding process with a light scattering sensor is presented. Although this technique is primarily applied for parametric surface roughness analysis, here it is shown that it enables also the measurement of the surface topography, i.e., the chatter marks occurring during the belt grinding process. In particular, it is proven that the light scattering method is appropriate to measure online the topography of chatter marks. Furthermore, the frequency analysis of the data reveals that the wavelength of chatter marks strongly depends on process parameters, such as the grinding speed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Special Analysis for the Disposal of the Idaho National Laboratory U-233 Solidified Grinding Sludge and Associated Debris Waste Stream at the Area 5 Radioactive Waste Management Site, Nevada National Security Site, Nye County, Nevada

This special analysis report evaluates whether the Idaho National Laboratory (INL) Uranium-233 (233U) Solidified Grinding Sludge and Associated Debris waste stream is suitable for shallow land burial at the Area 5 Radioactive Waste Management Site on the Nevada National Security Site. Disposal of the INL 233U Solidified Grinding Sludge waste meets all DOE M 435.1-1 performance objectives. The INL 233U Solidified Grinding Sludge waste stream is recommended for acceptance with the condition that the total 233U inventory shall not exceed 2.3E13 Bq.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1976

Evaluation of ball and roller bearings restored by grinding

The restoration by grinding of those rolling element bearings which are currently being discarded at aircaft engine and transmission overhaul is considered. Three bearing types were selected from the UH-1 helicopter engine and transmission for the pilot program. Groups of each of these bearings were visually and dimensionally inspected for suitability for restoration. A total of 250 bearings were restored by grinding. Of this number, 30 bearings from each type were endurance tested to a TBO of 1600 hours. No bearing failures occurred related to the restoration by grinding process. The two bearing failures which occurred were due to defective rolling elements and were typical of those which may occur in new bearings. The restorable component yield to the three groups was in excess of 90 percent.

Parker, R. J.↗
NASA NTRS1976

Evaluation of ball and roller bearings restored by grinding

A joint program was undertaken to restore by grinding those rolling-element bearings which are currently being discarded at aircraft engine and transmission overhaul. Three bearing types were selected from the UH-1 helicopter engine (T-53) and transmission for the pilot program. Groups of each of these bearings were visually and dimensionally inspected for suitability for restoration. A total of 250 bearings were restored by grinding. Of this number, 30 bearings from each type were endurance tested to a TBO of 1600 hours. No bearing failures occurred related to the restoration by grinding process. The two bearing failures which occurred were due to defective rolling elements and were typical of those which may occur in new bearings. The restorable component yield to the three groups was in excess of 90 percent.

Parker, R. J.↗
NASA NTRS1976

Bearing restoration by grinding

A joint program was undertaken by the NASA Lewis Research Center and the Army Aviation Systems Command to restore by grinding those rolling-element bearings which are currently being discarded at aircraft engine and transmission overhaul. Three bearing types were selected from the UH-1 helicopter engine (T-53) and transmission for the pilot program. No bearing failures occurred related to the restoration by grinding process. The risk and cost of a bearing restoration by grinding programs was analyzed. A microeconomic impact analysis was performed.

Hanau, H.↗
NASA NTRS1984

Influence parameters of impact grinding mills

Significant parameters for impact grinding mills were investigated. Final particle size was used to evaluate grinding results. Adjustment of the parameters toward increased charge load results in improved efficiency; however, it was not possible to define a single, unified set to optimum grinding conditions.

Hoeffl, K.↗
NASA NTRS1987

Grinding Inside A Toroidal Cavity

Weld lines ground smooth within about 0.001 in. Grinding tool for smoothing longitudinal weld lines inside toroidal cavity includes curved tunnel jig to guide grinding "mouse" along weld line. Curvature of tunnel jig matched to shape of toroid so grinding ball in mouse follows circular arc of correct radius as mouse is pushed along tunnel. Tool enables precise control of grindout shape, yet easy to use.

Mayer, Walter↗
NASA NTRS1989

Grinding Si3N4 Powder In Si3N4 Equipment

Three methods of grinding compared. Report based on study of grinding silicon nitride powder in preparation for sintering into solid ceramic material. Attrition, vibratory, and ball mills lined with reaction-bonded silicon nitride tested. Rates of reduction of particle sizes and changes in chemical compositions of powders measured so grinding efficiences and increases in impurity contents from wear of mills and media evaluated for each technique.

Herbell, Thomas P.↗
NASA NTRS1991

Fabrication of a grazing incidence telescope by grinding and polishing techniques on aluminum

The paper describes the fabrication processes, by grinding and polishing, used in making the mirrors for a f/2.8 Wolter type-I grazing incidence telescope at Boulder (Colorado), together with testing procedure used to determine the quality of the images. All grinding and polishing is done on specially designed machine that consists of a horizontal spindle to hold and rotate the mirror and a stroke arm machine to push the various tools back and forth along the mirrors length. The progress is checked by means of the ronchi test during all grinding and polishing stages. Current measurements of the telescope's image quality give a FWHM measurement of 44 arcsec, with the goal set at 5-10 arcsec quality.

Gallagher, Dennis↗
DOE OSTI2019

Influence of Abrasive Grinding on Through-Section Residual Stresses on Bearing Steel

In today’s industrial world, bearings are used in traditional applications such as automotive, steel mills, paper mills, railways as well as high precision applications such as aerospace, medical, renewable energy etc. Regardless of application, residual stresses play an important role in the service life of a bearing. In general, bearings experience Hertzian stresses in the order of 2-3 GPa with maximum stresses generated in the subsurface. Depending upon the magnitude and nature (tensile or compressive), the residual stresses enhance or reduce the application stresses. The residual stresses are generated during each stage of manufacturing process. For bearing components, the manufacturing stages include – tube rolling, green machining followed by heat treatment and final finishing. Majority of bearings are finished using abrasive grinding to achieve the final size and shape. The work holding and material removal during the grinding process can cause significant distortion. Distortion of bearing components is ab significant issue, especially for thin sectioned components, leading to high scrap rates. In this study, diffraction was utilized to understand the evolution of through thickness residual stresses after abrasive grinding on a thin walled bearing component. The results from neutron diffraction were coupled with distortion measurement especially the out of roundness to understand the effect of the final processing on the residual stress state present in the bearings.

Bedekar, Vikram↗
DOE OSTI2016

Development of size reduction equations for calculating power input for grinding pine wood chips using hammer mill

Size reduction is an unavoidable operation for preparing biomass for biofuels and bioproduct conversion. Yet, there is considerable uncertainty in power input requirement and the uniformity of ground biomass. Considerable gains are possible if the required power input for a size reduction ratio is estimated accurately. In this research three well-known mechanistic equations attributed to Rittinger, Kick, and Bond available for predicting energy input for grinding pine wood chips were tested against experimental grinding data. Prior to testing, samples of pine wood chips were conditioned to 11.7% wb, moisture content. The wood chips were successively ground in a hammer mill using screen sizes of 25.4 mm, 10 mm, 6.4 mm, and 3.2 mm. The input power and the flow of material into the grinder were recorded continuously. The recorded power input vs. mean particle size showed that the Rittinger equation had the best fit to the experimental data. The ground particle sizes were 4 to 7 times smaller than the size of installed screen. Geometric mean size of particles were calculated using two methods (1) Tyler sieves and using particle size analysis and (2) Sauter mean diameter calculated from the ratio of volume to surface that were estimated from measured length and width. The two mean diameters agreed well, pointing to the fact that either mechanical sieving or particle imaging can be used to characterize particle size. In conclusion, specific energy input to the hammer mill increased from 1.4 kWh t –1 (5.2 J g –1 ) for large 25.1-mm screen to 25 kWh t –1 (90.4 J g –1 ) for small 3.2-mm screen.

09 BIOMASS FUELS↗
DOE OSTI2018

Increasing ethanol yield through fiber conversion in corn dry grind process

Conversion of corn fiber to ethanol in the dry grind process could increase ethanol yields, reduce downstream processing costs and improve overall process profitability. In this work, we investigate the in-situ conversion of corn fiber into ethanol (cellulase addition during simultaneous saccharification and fermentation) during dry grind process. Addition of 30 FPU/g fiber cellulase resulted in 4.6% increase in ethanol yield compared to the conventional process. Use of excess cellulase (120 FPU/g fiber) resulted in incomplete fermentation and lower ethanol yield compared to the conventional process. Lastly, multiple factors including high concentrations of ethanol and phenolic compounds were responsible for yeast stress and incomplete fermentation in excess cellulase experiments.

09 BIOMASS FUELS↗
DOE OSTI2020

Balancing sugar recovery and inhibitor generation during energycane processing: Coupling cryogenic grinding with hydrothermal pretreatment at low temperatures

Pretreatment of lignocellulosic biomass at high temperatures or with oxidizing chemicals generate various inhibitors that restrict the efficient bioconversion of sugars in subsequent steps. The present study systematically investigates individual and combinatorial effects of pretreatment parameters on the generation of inhibitors. Herein, a plot between pretreatment temperature and inhibitor revealed optimum pretreatment temperature for energycane bagasse i.e., 170 °C beyond which total inhibitor production increased exponentially. No inhibitor production was observed on mechanical processing i.e., disk milling/cryogenic grinding of biomass. Evaluation of response surface regression exhibited that biomass solids loading has a significant effect on inhibitor generation at higher temperatures. The concentrations of certain inhibitors such as acetic acid, furfurals, and HMF increased more than 3-folds on doubling the solids loading. Furthermore, a novel low-severity approach of low-temperature hydrothermal pretreatment coupled with cryogenic grinding for lignocellulosic biomasses has been introduced which improved sugar yields while maintaining a low inhibitor concentration.

09 BIOMASS FUELS↗
DOE OSTI2018

The anomalous solidification of concrete grindings from acid treatment

We report that concrete grinding from highway maintenance operations produces large amounts of a highly basic liquid residue, posing a significant challenge to proper disposal. To discard this residue with little risk to human health or the environment, it should be solidified and its pH should be neutralized. Herein we present the serendipitous discovery that both goals can be met by treatment with citric acid. Through the use of 13 C and 29 Si solid-state NMR we determined that such treatment removes the calcium from the concrete structure, thus allowing the solubilization of its one-dimensional silica chains. These silica chains then cross-link in solution forming a highly porous silica material that is able to absorb the water from the residue. Finally, this new waste treatment process, which may utilize other acids with low water content, promises to facilitate a significantly improved methodology for the disposal of concrete grinding residue in a safe and environmentally friendly manner.

36 MATERIALS SCIENCE↗
DOE OSTI2017

More efficient grinding of hard-to-cut materials

The use of an impregnated abrasive tool in grinding stainless steel (12X18H10T) is investigated. The roughness of the machined surface and the grinding ratio are considerably better than when a traditional tool is employed.

42 ENGINEERING↗
DOE OSTI2018

Optimal Tool Design for Grinding Operations

An algorithm is outlined for the design of abrasive tools of optimal structure for a specific grinding operation, ensuring maximum productivity and minimum cost. Systems analysis is employed. Mathematical models for the design calculation are presented, and an example is given to illustrate the optimization of grinding tools.

42 ENGINEERING↗