Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GRAVIMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

An ice sheet model validation framework for the Greenland ice sheet

We propose a new ice sheet model validation framework the Cryospheric Model Comparison Tool (CMCT) that takes advantage of ice sheet altimetry and gravimetry observations collected over the past several decades and is applied here to modeling of the Greenland ice sheet. We use realistic simulations performed with the Community Ice Sheet Model (CISM) along with two idealized, non-dynamic models to demonstrate the framework and its use. Dynamic simulations with CISM are forced from 1991 to 2013 using combinations of reanalysis-based surface mass balance and observations of outlet glacier flux change. We propose and demonstrate qualitative and quanti- tative metrics for use in evaluating the different model simulations against the observations. We find 10 that the altimetry observations used here are largely ambiguous in terms of their ability to distinguish one simulation from another. Based on basin- and whole-ice-sheet scale metrics, the model initial condition as well as output from idealized and dynamic models all provide an equally reasonable representation of the ice sheet surface (mean elevation differences of <1 m). This is likely due to their short period of record, biases inherent to digital elevation models used for model initial conditions, and biases resulting from firn dynamics, which are not explicitly accounted for in the models or observations. On the other hand, we find that the gravimetry observations used here are able to unambiguously distinguish between simulations of varying complexity, and along with the CMCT, can provide a quantitative score for assessing a particular model and/or simulation. The new framework demonstrates that our proposed metrics can distinguish relatively better from relatively worse simulations and that dynamic ice sheet models, when appropriately initialized and forced with the right boundary conditions, demonstrate predictive skill with respect to observed dynamic changes occurring on Greenland over the past few decades. An extensible design will allow for continued use of the CMCT as future altimetry, gravimetry, and other remotely sensed data become available for use in ice sheet model validation.

58 GEOSCIENCES↗

High-Spatial-Resolution Mass Rates From GRACE and GRACE-FO: Global and Ice Sheet Analyses

GRACE and GRACE-FO gravimetry data are unique in its ability to observe global water mass variability and has frequently been applied for the determination of global mass rates to quantify the impacts of climate change and human activity on global freshwater availability and land ice evolution. However, its relatively coarse spatial resolution of ∼300-500 km at monthly intervals precludes its direct use to measure mass changes in smaller drainage basins and individual glacier systems. We present a new global high resolution mascon product that improves spatial resolution and signal recovery by estimating trends directly from more than 16 years of Level 1B GRACE and GRACE-FO data. We compare this product to independent gravimetry spherical harmonic trend estimates and to ice sheet mass rates derived from ICESat and ICESat-2 laser altimetry. We demonstrate enhanced global signal recovery and improved agreement with ICESat/ ICESat-2 and discuss likely causes for the remaining discrepancies between the gravimetry and laser altimetry solutions.

Bryant D. Loomis↗

Syntheses, crystal structures, and water adsorption behaviors of jungle-gym-type porous coordination polymers containing nitro moieties

NO{sub 2} containing dicarboxylate bridging ligands, nitroterephthalate (bdc-NO{sub 2}) and 2,5-dinitroterephthalate (bdc-(NO{sub 2}){sub 2}), afford porous coordination polymers, {l_brace}[Zn{sub 2}(bdc-NO{sub 2}){sub 2}(dabco)].solvents{r_brace}{sub n} (2 contains solvents) and {l_brace}[Zn{sub 2}(bdc-(NO{sub 2}){sub 2}){sub 2}(dabco)].solvents{r_brace}{sub n} (3 contains solvents). Both compounds form jungle-gym-type regularities, where a 2D square grid composed of dinuclear Zn{sub 2} units and dicarboxylate ligands is bridged by dabco molecules to extend the 2D layers into a 3D structure. In 2 contains solvents and 3 contains solvents, a rectangle pore surrounded by eight Zn{sub 2} corners contains two and four NO{sub 2} moieties, respectively. Thermal gravimetry (TG) and X-ray powder diffraction (XRPD) measurements reveal that both compounds maintain the frameworks regularities without guest molecules and with solvents such as MeOH, EtOH, i-PrOH, and Me{sub 2}CO. Adsorption measurements reveal that dried 2 and 3 adsorb H{sub 2}O molecules to be {l_brace}[Zn{sub 2}(bdc-NO{sub 2}){sub 2}(dabco)].4H{sub 2}O{r_brace}{sub n} (2 contains 4H{sub 2}O) and {l_brace}[Zn{sub 2}(bdc-(NO{sub 2}){sub 2}){sub 2}(dabco)].6H{sub 2}O{r_brace}{sub n} (3 contains 6H{sub 2}O), showing the pore hydrophilicity enhancement caused by NO{sub 2} group introduction. - Graphical abstract: Two hydrophilic porous coordination polymers, [Zn{sub 2}(bdc-NO{sub 2}){sub 2}(dabco)]{sub n} (2, bdc-NO{sub 2}=nitroterephthalate, dabco=1,4-diazabicyclo[2.2.2]octane) and [Zn{sub 2}(bdc-(NO{sub 2}){sub 2}){sub 2}(dabco)]{sub n} (3, bdc-(NO{sub 2}){sub 2}=2,5-dinitroterephthalate), have been synthesized and characterized by single X-ray analyses, thermal gravimetry, and adsorption measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal properties of simulated Hanford waste glasses

Abstract The Hanford Tank Waste Treatment and Immobilization Plant will vitrify the mixed hazardous wastes generated from 45 years of plutonium production at the Hanford Site in Washington State. The molten glasses will be poured into stainless steel containers or canisters and subsequently cooled for storage and disposal. For appropriate facility design and operations to handle such highly energy‐consuming processes, knowledge of the material properties is required. The thermal properties (heat capacity, thermal diffusivity, and thermal conductivity) of representative high‐level and low‐activity waste glasses were studied as functions of temperature in the range of 200°C‐800°C (relevant to the cooling process). Simultaneous differential scanning calorimetry‐thermal gravimetry (DSC‐TGA), Xe‐flash diffusivity, pycnometry, and dilatometry were implemented. The study showed that simultaneous DSC‐TGA would be a reliable method for obtaining the heat capacity of various glasses in the temperature range of interest. Accurate thermal properties from this study were shown to provide a more realistic guideline for capacity and time constraints of the heat removal process when compared to the original conservative design‐basis engineering estimates. The estimates, though useful for design in the absence of measured physical properties, can now be supplanted and the measured thermal properties can be used in design verification activities.

Rodriguez, Carmen P.↗

Gravitational field modes GEM 3 and 4

A refinement in the satellite geopotential solution for a Goddard Earth Model (GEM 3) was obtained. The solution includes the addition of two low inclination satellites, SAS at 3 deg and PEOLE at 15 deg, and is based upon 27 close earth satellites containing some 400,000 observations of electronic, laser, and optical data. In addition, a new combination satellite/gravimetry solution (GEM 4) was derived. The new model includes 61 center of mass tracking station locations with data from GRARR, Laser, MOTS, Baker-Nunn, and NWL Tranet Doppler tracking sites. Improvement was obtained for the zonal coefficients of the new models and is shown by tests on the long period perturbations of the orbits. Individual zonal coefficients agree very closely among different models that contain low inclination satellites. Tests of models with surface gravity data show that the GEM 3 satellite model has significantly better agreement with the gravimetry data than the GEM 1 satellite model, and that it also has better agreement with the gravimetry data than the 1969 SAO Standard Earth 2 model.

Lerch, F. J.↗

Water Cycle Science Enabled By the GRACE and GRACE-FO Satellite Missions

Satellite observations of the time-variable gravity field revolutionized the monitoring of large-scale water storage changes, beginning with the 2002 launch of the Gravity Recovery and Climate Experiment (GRACE) mission. Most hydrologists were sceptical of the satellite gravimetry approach at first, but validation studies assuaged their concerns and high-profile, GRACE-based groundwater depletion studies caused an explosion of interest. The importance of GRACE observations for hydrologic and cryospheric science became so great that GRACE Follow-On (GRACE-FO) jumped the National Aeronautics and Space Administration’s Earth science mission queue and launched in 2018. A third mass change mission is currently under development. Here, we review key milestones in satellite gravimetry’s progression from the fringes of hydrology to being a staple of large-scale water cycle and water resources studies and the sole source of observations of what is now an ‘essential climate variable’, terrestrial water storage.

climate change↗

Controlled release of losartan from acid- and heat-treated halloysite nanotubes

In this work, a simple method was used to sustained release of losartan (LOS) as a high blood pressure-controller drug using halloysites (HNT) as a carrier. The present work can be considered as an effective method because of using HNT as a natural source, which is available, inexpensive, safe with specific structure that led to release of drug, gradually. This carrier was improved by calcination and etching processes and their effect was investigated on loading amount and in vitro release of drug from HNT. The products were characterized by various analyses such as: BET (Brunauer–Emmett–Teller), TG (thermal gravimetry), TEM (transmission electron microscopy), and XRD (X-ray powder diffraction). According to the studies, two processes improving had no effect on structure and morphology of HNT and only increased the lumen size of them. It should be noted, removal water molecules through calcination had binary effect on halloysites: enlargement of lumen and decreasing the drug loading. Besides, release rate was investigated and it showed that maximum and minimum release rate of LOS are assigned to simple HNT and etched-HNT (EHNT), respectively. Kinetics studies confirmed that releasing the LOS molecules from HNT followed by diffusion process that is identified as Fickian diffusion.

60 APPLIED LIFE SCIENCES↗

Experimental evidence of a moisture clog effect in cement-based materials under temperature

This study is an original contribution to the understanding of the hydraulic behaviour of cement-based materials when subjected to temperature rises. Permeability is measured continuously during heating by injecting inert gas into a sample at homogeneous temperature. Using a confining cell especially designed in our laboratory, the sample is submitted to a constant heating rate, up to 200 deg. C, superimposed to hydrostatic pressure (at ca. 5 MPa). In parallel with a normalised CEM II mortar (water-to-cement ratio (W/C) of 0.5), a CEM V-cement-based concrete, used in nuclear waste storage applications, is studied. For normalised mortar, gas retention is evidenced, depending on the sample size (scale effect), water saturation level S{sub w}, and heating rate. For dry normalised mortar, permeability may be divided by two during heating. In conjunction with thermo-gravimetry analysis (TGA) results, such evolution is attributed to the dehydration of C-S-H around 150 deg. C. Indeed, mass loss after heat cycling is substantially higher than that due to free water release solely: mortar loses structural, bound water during the process. For partially-saturated and long mortar samples, a gas retention phenomenon is recorded when heating at a rate of ca. 4.9 deg. C/min. Our analysis is that free water inside the macropores, as well as bound water released from the C-S-H, dilates or vaporizes, and obstructs the interconnected porous network. Due to moisture clogging, no more gas is allowed through the material pore network: a so-called gas retention phenomenon occurs. Most interestingly, although loosing structural water like normalised mortar, yet over a wider temperature range, dry CEM V concrete displays good temperature resistance, as its permeability remains constant during heating. For highly partially-saturated concrete, a gas retention effect is recorded. As a conclusion, observed phenomena at the laboratory scale testify of potentially strong gas retention effects upon engineering structures subjected to temperature gradients over time. Indeed, quite low temperature rises (and heating rates) are able to induce moisture clogging inside partially-saturated materials. It is also concluded that cement-based material composition, i.e. bound water release ability, is influential in gas transport phenomena under temperature.

36 MATERIALS SCIENCE↗

Relationship between domestic smoking and metals and rare earth elements concentration in indoor PM2.5

Highlights: • Tobacco smoke releases heavy metals (HM) and REE in indoor dwellings. • Elemental content in indoor PM{sub 2.5} was measured in smoking and non smoking dwellings. • Extracted and mineralized fractions of elements were evaluated by ICP-MS. • Indoor smoke was associated with increase of specific elemental fractions in PM{sub 2.5}. • Increased levels of HM and REE are associated with respiratory symptoms in children. Cigarette smoke is the main source of indoor chemical and toxic elements. Cadmium (Cd), Thallium (Tl), Lead (Pb) and Antimony (Sb) are important contributors to smoke-related health risks. Data on the association between Rare Earth Elements (REE) Cerium (Ce) and Lanthanum (La) and domestic smoking are scanty. To evaluate the relationship between cigarette smoke, indoor levels of PM{sub 2.5} and heavy metals, 73 children were investigated by parental questionnaire and skin prick tests. The houses of residence of 41 “cases” and 32 “controls” (children with and without respiratory symptoms, respectively) were evaluated by 48-h PM{sub 2.5} indoor/outdoor monitoring. PM{sub 2.5} mass concentration was determined by gravimetry; the extracted and mineralized fractions of elements (As, Cd, Ce, La, Mn, Pb, Sb, Sr, Tl) were evaluated by ICP-MS. PM{sub 2.5} and Ce, La, Cd, and Tl indoor concentrations were higher in smoker dwellings. When corrected for confounding factors, PM{sub 2.5}, Ce, La, Cd, and Tl were associated with more likely presence of respiratory symptoms in adolescents. We found that: i) indoor smoking is associated with increased levels of PM{sub 2.5}, Ce, La, Cd, and Tl and ii) the latter with increased presence of respiratory symptoms in children.

54 ENVIRONMENTAL SCIENCES↗

Chemical and structural changes in Ln{sub 2}NiO{sub 4+δ} (Ln=La, Pr or Nd) lanthanide nickelates as a function of oxygen partial pressure at high temperature

The chemical stability of lanthanide nickelates Ln{sub 2}NiO{sub 4+δ} (Ln=La, Pr or Nd) has been studied in the temperature range 25–1300 °C, either in air or at low pO{sub 2} (down to 10{sup −4} atm). Thermal gravimetry analysis (TGA) measurements coupled with X-ray diffraction (XRD) characterization have shown that all compounds retain their K{sub 2}NiF{sub 4}-type structure in these conditions, while remaining over-stoichiometric in oxygen up to 1000 °C. Only Nd{sub 2}NiO{sub 4+δ} starts to decompose into Nd{sub 2}O{sub 3} and NiO above 1000 °C, at pO{sub 2}=10{sup −4} atm. In addition, a careful analysis of the lanthanide nickelates structural features has been performed by in situ XRD, as a function of temperature and pO{sub 2}. For all compounds, a structural transition has been always observed in the temperature range 200–400 °C, in air or at pO{sub 2}=10{sup −4} atm. In addition, their cell volume did not vary upon the variation of the oxygen partial pressure. Therefore, these materials do not exhibit a chemical expansion in these conditions, which is beneficial for a fuel cell application as cathode layers. Additional dilatometry measurements have revealed that a temperature as high as 950 °C for Pr{sub 2}NiO{sub 4+δ} or 1100 °C for La{sub 2}NiO{sub 4+δ} and Nd{sub 2}NiO{sub 4+δ} has to be reached in order to begin the sintering of the material particles, which is of primary importance to obtain an efficient electronic/ionic conduction in the corresponding designed cathode layers. Besides, excellent matching was found between the thermal expansion coefficients of lanthanide nickelates and SOFC electrolytes such as 8wt% yttria stabilized zirconia (8YSZ) or Ce{sub 0.8}Gd{sub 0.2}O{sub 2−δ} (GDC), at least from 400 °C up to 1400 °C in air or up to 1200 °C at pO{sub 2}=10{sup −4} atm. - Graphical abstract: This study reports the good chemical stability of oxygen overstoichiometric Ln2NiO4+δ(Ln = La, Pr or Nd) at high temperatures (up to 1300 °C), eitherin air or at pO2down to 10-4 atm. In addition, these MSC cathode materials show a small chemical expansion as well as a good TEC compatibility with electrolyte materials (GDC or YSZ). - Highlights: • The structure of Ln2NiO4+δ compounds are studied vs. temperature and pO2 • Structural transitions are evidenced in air as well as in low pO2 atmosphere • The structural transitions do not significantly affect their TECs values • Up to 1200 °C, they show good chemical stability and no chemical expansion vs. pO2 • TECs of nickelates, 8YSZ and GDC are compared in air and in low pO2 atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scanning electron microscopy, X-ray diffraction and thermal analysis study of the TiH{sub 2} foaming agent

The decomposition of commercially available TiH{sub 2} was investigated while performing different thermal treatments. TiH{sub 2} powder, which is widely used as a foaming agent, was heat treated at 450 Degree-Sign C for various times, from 15 min to 120 min. Scanning electron microscopy (SEM) images of the surfaces at different magnifications were obtained and interpreted. A Bragg-Brentano X-ray diffractometer was used to measure the X-ray diffraction (XRD) spectra on all five samples. A close examination of the diffraction spectra showed that for an as-received sample and samples undergoing the longest thermal treatment (1 and 2 h) these spectra can be explained as deriving from cubic TiH{sub 1.924}, while for the other two samples they can be explained as deriving from tetragonal TiH{sub 1.924}. A constant-unit-cell-volume phase transition between the cubic and tetragonal phases in TiH{sub 2-y}-type compounds had been described in the literature. The unit-cell parameters obtained from measured spectra confirm that within the measurement uncertainty the unit-cell volume is indeed constant in all five samples. Thermo-gravimetry (TG) and differential thermal analysis (DTA) measurements were performed on all the samples, showing that the intensity of the dehydrogenation depends on the previous treatment of the TiH{sub 2}. After the thermal analysis XRD of the samples was performed again and the material was found to exhibit a Ti-like unit cell, but slightly enlarged due to the unreleased hydrogen. - Highlights: Black-Right-Pointing-Pointer TiH{sub 2} samples were cubic or tetragonal TiH{sub 1.924} Black-Right-Pointing-Pointer Onset of the hydrogen release temperature increases with the pre-treatment time. Black-Right-Pointing-Pointer Thermal dehydrogenation for the as-prepared TiH{sub 2} is a three-step process. Black-Right-Pointing-Pointer After thermal analysis 2 residual hydrogen TiH{sub x} phases, close to {alpha}Ti, appeared.

36 MATERIALS SCIENCE↗

Synthesis and electromagnetic properties of BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19}/titanium dioxide composites

Graphical abstract: Due to combining different functions and characteristics of individual materials, hybrid nanocomposite materials can strengthen their applications. Magnetic-conductive nanocomposites are the promising materials with electromagnetic loss, which have synergetic behavior between magnetic and conductive materials. It is the first time to report the synthesis of BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19}/titanium dioxide (BF/TD) composites by the gel-precursor self-propagating combustion process. The influence of mass ratio of BF and TD on the electromagnetic properties of BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19}/titanium dioxide composites was studied. The tgδ{sub μ} and tgδ{sub ε} of BF–TD composites. - Highlights: • It is the first time to report BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19}/titanium dioxide composites. • The composites are prepared by the gel-precursor self-propagating combustion. • The electromagnetic properties could be adjusted by the mass ratio of BF and TD. • The introduction of TD enhances the dielectric loss and widens the frequency bands. • BF/TD composites will be microwave absorption materials with wide frequency band. - Abstract: Doped BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19}/titanium dioxide composites have been prepared by the gel-precursor self-propagating combustion process. The characterization of the composites are performed by Fourier transform infrared (FT-IR), X-ray diffraction (XRD), Differential thermal analysis-thermo gravimetry (DTA–TG), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) and network analyzer. Both XRD and FT-IR indicate that the doped BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19}/titanium dioxide composites are successfully synthesized and there are some interactions between BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19} and titanium dioxide. DTA–TG analysis of BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19}/titanium dioxide composites shows that the composite gel decomposition process mainly includes two stages: the first stage is the crystallized water and the residual moisture evaporation; the second stage is the nitrate and citric acid decomposition reaction. SEM demonstrates that the doped BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19}/titanium dioxide solid solution has formed. The magnetic parameters indicate that the electromagnetic properties of the composites could be well adjusted by the mass ratio of BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19} and titanium dioxide. When the mass ratio of BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19} and titanium dioxide is 4:5, the composites have the best magnetic loss. The composites with the mass ratio 6:5 of BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19} and titanium dioxide. BaFe{sub 11.92}(LaNd){sub 0.04}O{sub 19} and titanium dioxide possess good dielectric loss. The introduction of titanium dioxide enhances the dielectric loss and widens the frequency bands. The composites will be promising microwave absorption materials with wide frequency band.

36 MATERIALS SCIENCE↗

Thermodynamic data of Ba{sub 0.6}Sr{sub 0.4}Co{sub 0.8}Fe{sub 0.2}O{sub 3−δ} SOFC cathode material

Graphical abstract: Partial molar energy of oxygen dissolution (ΔG{sup −}{sub O{sub 2}}) and equilibrium partial pressure of oxygen (log⁡p{sub O{sub 2}}) of perovskite material with the composition Ba{sub 0.6}Sr{sub 0.4}Co{sub 0.8}Fe{sub 0.2}O{sub 3−δ} as a function of temperature. - Highlights: • We report relevant data for thermodynamic stability of Ba{sub 0.6}Sr{sub 0.4}Co{sub 0.8}Fe{sub 0.2}O{sub 3−δ} perovskite compound. • Temperature of structural transformations related to the charge compensation of the material system is evidenced. • The results are discussed based on the properties-defect structure relationship. - Abstract: The compound Ba{sub 0.6}Sr{sub 0.4}Co{sub 0.8}Fe{sub 0.2}O{sub 3−δ} with perovskite structure has been studied focusing mainly on the thermodynamic stability in correlation to the change in the oxygen stoichiometry. The thermochemical behavior has been investigated from room temperature to 1300 K by thermal gravimetry and differential thermal analysis in air and by calorimetry in scanning mode in Argon. The temperature dependence of enthalpy (ΔH{sup T}{sub 298}) in the temperature range of 300–900 K was measured by drop calorimetry. Thermodynamic properties represented by the relative partial molar free energies, enthalpies and entropies of oxygen dissolution in the perovskite phase, as well as the equilibrium partial pressures of oxygen have been obtained in the temperature range of 823–1273 K using solid electrolyte electrochemical cells (EMF). The influence of the oxygen stoichiometry on the thermodynamic properties was examined using a coulometric titration technique coupled with EMF measurements. The results are discussed based on the strong correlation between the energetic parameters and the charge compensation of the material system.

36 MATERIALS SCIENCE↗

Synthesis and study of Pd-Rh alloy nanoparticles and alumina-supported low-content Pd-Rh catalysts for CO oxidation

Highlights: • A bimetallic Pd-Rh/alumina catalyst was prepared using coordination compound. • The peculiarities of precursor decomposition under different media were studied. • Catalytic performance and stability were examined in a CO oxidation reaction. - Abstract: Palladium and rhodium are known to be partly miscible metals. In present work, the peculiarities of coordination compound [Pd(NH{sub 3}){sub 4}]{sub 3}[Rh(NO{sub 2}){sub 6}]{sub 2} decomposition with formation of nanosized solid solutions under different atmospheres were studied by means of thermal gravimetry. Formation of alloy nanoparticles were confirmed by powder X-ray diffraction analysis, scanning and transmission electron microscopies. A bimetallic Pd-Rh/alumina catalyst was prepared by incipient wetness impregnation using coordination compound [Pd(NH{sub 3}){sub 4}]{sub 3}[Rh(NO{sub 2}){sub 6}]{sub 2} as a precursor. Monometallic reference samples were obtained using [Pd(NH{sub 3}){sub 4}](NO{sub 3}){sub 2} and Na{sub 3}[Rh(NO{sub 2}){sub 6}], correspondingly. Catalytic performance and stability of the catalysts were examined in a model reaction of CO oxidation in a prompt thermal aging regime. The environment of precursor decomposition was shown to affect noticeably both the initial activity and stability of the samples in the studied reaction. Reductive atmosphere in comparison with inert and oxidative ones facilitates the formation of the smallest active component species, which demonstrate highest initial activity but worst stability.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Potential of Hydrogeodesy to Address Water-Related and Sustainability Challenges

Increasing climatic and human pressures are changing the world's water resources and hydrological processes at unprecedented rates. Understanding these changes requires comprehensive monitoring of water resources. Hydrogeodesy, the science that measures the Earth's solid and aquatic surfaces, gravity field, and their changes over time, delivers a range of novel monitoring tools that are complementary to traditional hydrological methods. It encompasses geodetic technologies such as Altimetry, Interferometric Synthetic Aperture Radar (InSAR), Gravimetry, and Global Navigation Satellite Systems (GNSS). Beyond quantifying these changes, there is a need to understand how hydrogeodesy can contribute to more ambitious goals dealing with water-related and sustainability sciences. Addressing this need, we combine a meta-analysis of over 3,000 articles to chart the range, trends, and applications of satellite-based hydrogeodesy with an expert elicitation that systematically assesses the potential of hydrogeodesy. We find a growing body of literature relating to the advancements in hydrogeodetic methods, their accuracy and precision, and their inclusion in hydrological modeling, with a considerably smaller portion related to understanding hydrological processes, water management, and sustainability sciences. The meta-analysis also shows that while lakes, groundwater and glaciers are commonly monitored by these technologies, wetlands or permafrost could benefit from a wider range of applications. In turn, the expert elicitation envisages the potential of hydrogeodesy to help solve the 23 Unsolved Questions of the International Association of Hydrological Sciences and advance knowledge as guidance toward a safe operating space for humanity. It also highlights how this potential can be maximized by combining hydrogeodetic technologies simultaneously, exploiting artificial intelligence, and accurately integrating other Earth science disciplines. Finally, we call for a coordinated way forward to include hydrogeodesy in tertiary education and broaden its application to water-related and sustainability sciences in order to exploit its full potential.

54 ENVIRONMENTAL SCIENCES↗

Measuring coalignment of retroreflectors with large lateral incoming-outgoing beam offset

A method based on phase-shifting Fizeau interferometry is presented with which retroreflectors with large incoming-outgoing beam separations can be tested. The method relies on a flat Reference Bar that is used to align two auxiliary mirrors parallel to each other to extend the aperture of the interferometer. The method is applied to measure the beam coalignment of a prototype Triple Mirror Assembly of the GRACE Follow-On Laser Ranging Interferometer, a future satellite-to-satellite tracking device for Earth gravimetry. The Triple Mirror Assembly features a lateral beam offset of incoming and outgoing beam of 600 mm, whereas the acceptance angle for the incoming beam is only about ±2 mrad. With the developed method, the beam coalignment of the prototype Triple Mirror Assembly was measured to be 9 μrad with a repeatability of below 1 μrad.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Double diffraction in an atomic gravimeter

We demonstrate the realization of a scheme for cold-atom gravimetry based on the recently demonstrated use of double-diffraction beam splitters [T. Leveque, A. Gauguet, F. Michaud, F. Pereira Dos Santos, and A. Landragin, Phys. Rev. Lett. 103, 080405 (2009)], where the use of two retro-reflected Raman beams allows symmetric diffraction in +-(Planck constant/2pi)k{sub eff} momenta. Although in principle restricted to the case of zero Doppler shift, for which the two pairs of Raman beams are simultaneously resonant, such diffraction pulses can remain efficient on atoms with nonzero velocity, such as in a gravimeter, when the frequency of one of the two Raman laser sources is modulated. Such pulses are used to realize an interferometer insensitive to laser phase noise and some of the dominant systematics. This approach reduces the technical requirements and would allow the realization of a simple atomic gravimeter. A sensitivity of 1.2x10{sup -7}g per shot is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗