Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GEE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

NUB1 traps unfolded FAT10 for ubiquitin-independent degradation by the 26S proteasome

The ubiquitin-like modifier FAT10 targets hundreds of proteins in the mammalian immune system to the 26S proteasome for degradation. This degradation pathway requires the cofactor NUB1, yet the underlying mechanisms remain unknown. Here, we reconstituted a minimal in vitro system with human components and revealed that NUB1 uses the intrinsic instability of FAT10 to trap its N-terminal ubiquitin-like domain in an unfolded state and deliver it to the 26S proteasome for engagement, allowing the degradation of FAT10-ylated substrates in a ubiquitin-independent and p97-independent manner. Using hydrogen–deuterium exchange, structural modeling and site-directed mutagenesis, we identified the formation of an intricate complex with FAT10 that activates NUB1 for docking to the 26S proteasome, and our cryo-EM studies visualized the highly dynamic NUB1 complex bound to the proteasomal Rpn1 subunit during FAT10 delivery and the early stages of ATP-dependent degradation. These findings identified a previously unknown mode of cofactor-mediated, ubiquitin-independent substrate delivery to the 26S proteasome that relies on trapping partially unfolded states for engagement by the proteasomal ATPase motor.

Arkinson, Connor↗
DOE OSTI2024

Temperature-dependent iron motion in extremophile rubredoxins – no need for ‘corresponding states’

Extremophile organisms are known that can metabolize at temperatures down to – 25 °C (psychrophiles) and up to 122 °C (hyperthermophiles). Understanding viability under extreme conditions is relevant for human health, biotechnological applications, and our search for life elsewhere in the universe. Information about the stability and dynamics of proteins under environmental extremes is an important factor in this regard. Here we compare the dynamics of small Fe-S proteins – rubredoxins – from psychrophilic and hyperthermophilic microorganisms, using three different nuclear techniques as well as molecular dynamics calculations to quantify motion at the Fe site. The theory of ‘corresponding states’ posits that homologous proteins from different extremophiles have comparable flexibilities at the optimum growth temperatures of their respective organisms. Although ‘corresponding states’ would predict greater flexibility for rubredoxins that operate at low temperatures, we find that from 4 to 300 K, the dynamics of the Fe sites in these homologous proteins are essentially equivalent.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Strain-affected ferroelastic domain walls in RbMnFe charge-transfer materials undergoing collective Jahn–Teller distortion

Many rubidium manganese hexacyanoferrate materials, with the general formula Rb x Mn[Fe(CN) 6 ] (x+2)/3 ·zH 2 O, exhibit diverse charge-transfer-based functionalities due to the bistability between a high temperature Mn II (S = 5/2)Fe III (S = 1/2) cubic phase and a low-temperature Mn III (S = 2)Fe II (S = 0) tetragonal phase. The collective Jahn–Teller distortion on the Mn sites is responsible for the cubic-to-tetragonal ferroelastic phase transition, which is associated with the appearance of ferroelastic domains. In this study, we use X-ray diffraction to reveal the coexistence of 3 types of ferroelastic tetragonal domains and estimate the spatial extension of the strain around the domain walls, which represents about 30% of the volume of the crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dislocation half-loop control for optimal V-defect density in GaN-based light emitting diodes

V-defects are morphological defects that typically form on threading dislocations during epitaxial growth of $(0001)$-oriented GaN layers. A V-defect is a hexagonal pyramid-shaped depression with six {$10\bar{1}1$}-oriented sidewalls. These semipolar sidewalls have a lower polarization barrier than the polarization barriers present between the polar c-plane quantum wells and quantum barriers and can laterally inject carriers directly into quantum wells in GaN-based light emitting diodes (LEDs). This is especially important, as the high polarization field in c-plane GaN is a significant factor in the high forward voltage of GaN LEDs. The optimal V-defect density for efficient lateral carrier injection in a GaN LED (∼10 9 cm −2 ) is typically an order of magnitude higher than the threading dislocation density of GaN grown on patterned sapphire substrates (∼10 8 cm −2 ). Pure-edge dislocation loops have been known to exist in GaN, and their formation into large V-defects via low-temperature growth with high Si-doping has recently been studied. Here, in this work, we develop a method for pure-edge threading dislocation half-loop formation and density control via disilane flow, growth temperature, and thickness of the half-loop generation layer. We also develop a method of forming the threading dislocation half-loops into V-defects of comparable size to those originating from substrate threading dislocations.

Crystallographic defects↗
DOE OSTI2025

Experimental electronic structures of the Fe IV =O bond in S=1 heme vs. nonheme sites: Effect of the porphyrin ligand

High-valent Fe IV =O species are common intermediates in biological and artificial catalysts. Heme and nonheme S=1 Fe IV =O sites have been synthesized and studied for decades but little quantitative experimental comparison of their electronic structures has been available, due to the lack of direct methods focused on the iron. This study allows a rigorous determination of the electronic structure of a nonheme Fe IV =O center and its comparison to an Fe IV =O heme site using 1s2p resonant inelastic X-ray scattering (RIXS) and Fe L-edge X-ray absorption spectroscopy (XAS). Further, variable temperature magnetic circular dichroism (VT-MCD) of the ligand field transitions, combined with nuclear resonance vibrational spectroscopy of the two S=1 Fe IV =O systems show that the equatorial ligand field decreases from a nonheme to a heme Fe IV =O site. Alternatively, RIXS and Fe L-edge XAS combined with MCD show that the Fe dπ orbitals are unperturbed in the Fe IV =O heme relative to the nonheme site because the strong axial Fe-O bond uncouples the Fe dπ orbitals from the porphyrin π-system. As a consequence, the thermodynamics and kinetics of the H-atom abstraction reactions are actually very similar for heme compound II and nonheme Fe IV =O active sites.

bioinorganic chemistry↗
DOE OSTI2024

Overview of physics results from MAST upgrade towards core-pedestal-exhaust integration

Recent results from MAST Upgrade are presented, emphasising understanding the capabilities of this new device and deepening understanding of key physics issues for the operation of ITER and the design of future fusion power plants. The impact of MHD instabilities on fast ion confinement have been studied, including the first observation of fast ion losses correlated with Compressional and Global Alfvén Eigenmodes. High-performance plasma scenarios have been developed by tailoring the early plasma current ramp phase to avoid internal reconnection events, resulting in a more monotonic q profile with low central shear. The impact of m/n = 3/2, 2/1 and 1/1 modes on thermal plasma confinement and rotation profiles has been quantified, and scenarios optimised to avoid them have transiently reached values of normalised beta approaching 4.2. In pedestal and ELM physics, a maximum pedestal top temperature of ~350 eV has been achieved, exceeding the value achieved on MAST at similar heating power. Mitigation of type-I ELMs with n = 1 RMPs has been observed. Studies of plasma exhaust have concentrated on comparing conventional and Super-X divertor configurations, while X-point target, X-divertor and snowflake configurations have been developed and studied in parallel. In L-mode discharges, the separatrix density required to detach the outer divertors is approximately a factor 2 lower in the Super-X than the conventional configuration, in agreement with simulations. Detailed analysis of spectroscopy data from studies of the Super-X configuration reveal the importance of including plasma-molecule interactions and D 2 Fulcher band emission to properly quantify the rates of ionisation, plasma-molecule interactions and volumetric recombination processes governing divertor detachment. In H-mode with conventional and Super-X configurations, the outer divertors are attached in the former and detached in the latter with no impact on core or pedestal confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Multi-slice electron ptychographic tomography for three-dimensional phase-contrast microscopy beyond the depth of focus limits

Electron ptychography is a powerful computational method for atomic-resolution imaging with high contrast for weakly and strongly scattering elements. Modern algorithms coupled with fast and efficient detectors allow imaging specimens with tens of nanometers thicknesses with sub-0.5 Ångstrom lateral resolution. However, the axial resolution in these approaches is currently limited to a few nanometers, limiting their ability to solve novel atomic structures ab initio. Here, we experimentally demonstrate multi-slice ptychographic electron tomography, which allows atomic resolution three-dimensional phase-contrast imaging in a volume surpassing the depth of field limits. We reconstruct tilt-series 4D-STEM measurements of a $\mathrm{Co_3O_4}$ nanocube, yielding 2 Å axial and 0.7 Å transverse resolution in a reconstructed volume of $\mathrm{(18.2\,nm)^3}$. Our results demonstrate a 13.5-fold improvement in axial resolution compared to multi-slice ptychography while retaining the atomic lateral resolution and the capability to image volumes beyond the depth of field limit. Multi-slice ptychographic electron tomography significantly expands the volume of materials accessible using high-resolution electron microscopy. We discuss further experimental and algorithmic improvements necessary to also resolve single weakly scattering atoms in 3D.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structure of active methyl-CoM reductase, Earth’s main methane producer

Summary Our work reveals the structure of the active state of Methyl-Coenzyme M Reductase (MCR), the key and rate-limiting enzyme in biological methane formation. We find large differences between the active Ni(I) and inactive Ni(II) proteins and provide insight into how nature makes and breaks the C-H bond of methane. The Ni(II)-F430 center in inactive MCR contains four planar nitrogen ligands, a lower axial glutamine oxo, and an upper axial thiolate. The Ni(I)-enzyme replaces the axial ligands with a single water. The one-electron redox change results in movement of the Ni ion and upward swing of the β-lactam ring in the tetrapyrrole coupled to a domino-like protein quake through second sphere residues, inter-subunit interactions, a substrate tunnel, affecting even the dimensions of the unit cell. These structural changes lead Ni(I)-MCR to release a charge clamp that, in the Ni(II) state, locks down substrate Coenzyme B. Determining the Ni(I)-MCR structure required development of rigorous anaerobic crystallographic techniques. Validation of the MCR redox state was accomplished by in-line and parallel spectroscopic and unit cell analyses. This structure has large implications for developing technologies to limit methane emissions and efficiently produce biofuels. Methodology described here will enhance structural biology for other oxygen-sensitive enzymes.

09 BIOMASS FUELS↗
DOE OSTI2025

High-resolution in-situ characterization of laser powder bed fusion via transmission X-ray microscopy at X-ray free electron lasers

In this work, we describe the instrumentation used to perform the first operando transmission X-ray microscopy (TXM) and simultaneous X-ray diffraction of laser melting simulating laser powder bed fusion on the XCS instrument at the Linac Coherent Light Source (LCLS) X-ray free-electron laser (XFEL). Our TXM with 40× magnification in the X-ray regime at 11 keV gave spatial resolutions down to 940 nm per line pair, with effective pixel sizes down to 206 nm, image integration times of <100 fs, and frame rates tunable between 2.1 and 119 ns for two probe frames (0.48 GHz to 8.4 MHz). Images were recorded on Zyla and Icarus (UXI) detectors to trade off between spatial resolution and time dynamics. A 1 kW CW IR laser was coupled into the interaction point to conduct pump–probe studies of laser melting and solidification dynamics. Our temporal and spatial resolution with attenuation-based contrast exceeds that currently possible with synchrotron-based high-speed radiography. This system was sensitive to feature velocities of 10–12000 m s −1 but we did not observe any motion in this range in the laser melting of Al6061 alloy. Shockwaves were not observed and hot cracking proceeded at velocities below the detection limits. Pore accumulation was observed between successive shots, indicating that bubble escape mechanisms were not active. With proper experimental design, the spatial resolution, contrast and field of view could be further improved or modified. The increased brightness and narrower bandwidth of the XFEL allowed for this imaging technique and it lays the groundwork for a wide range of operando techniques to study additive manufacturing.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Macromolecular crystallography and biology at the Linac Coherent Light Source

The Linac Coherent Light Source (LCLS) has significantly impacted the field of biology by providing advanced capabilities for probing the structure and dynamics of biological molecules with high precision. The ultrashort coherent X-ray pulses from the LCLS have enabled ultrafast, time-resolved, serial femtosecond crystallography that is inaccessible at conventional synchrotron light sources. Since the facility's founding, scientists have captured detailed insights into biological processes at atomic resolution and fundamental timescales. The ability to observe these processes in real time and under conditions closely resembling their natural state is transforming our approach to studying biochemical mechanisms and developing new medical and energy applications. This work recounts some of the history of the LCLS, advances in biological research enabled by the LCLS, key biological areas that have been impacted and how the LCLS has helped to unravel complex biological phenomena in these fields.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

III-nitride m-plane violet narrow ridge edge-emitting laser diodes with sidewall passivation using atomic layer deposition

A novel deep-ridge laser structure with atomic-layer deposition (ALD) sidewall passivation was proposed that enhances the optical characteristics of 8-µm ridge width III-nitride violet lasers on freestanding m -plane GaN substrates. The internal loss was determined using the variable stripe length method, where the laser structure with ALD sidewall passivation showed lower internal loss compared to the conventional shallow-ridge laser design. ALD sidewall passivation plays a critical role in device improvements; compared to the lasers without ALD sidewall passivation, the lasers with ALD sidewall passivation yield improved optoelectrical performance and longer lifetime under continuous-wave operation at high current density. This work demonstrates the importance of ALD sidewall passivation to laser performance, which enables high energy efficiency.

Wong, Matthew S.↗
DOE OSTI2025

Blinking compromises the single-photon purity of individual CsPbBr 3 perovskite nanocrystals

Individual lead halide perovskite nanocrystals (PNCs) are promising single photon emitters but often suffer from photoluminescence blinking. Here, we correlate the photoluminescence blinking behavior of CsPbBr 3 NCs with their second-order correlation functions. We find that even moderate band-edge carrier blinking (BC-blinking) can significantly decrease the PNC’s single photon purity, while the impact from Auger blinking is much smaller. Additionally, the degree of BC-blinking can introduce significant uncertainties in single photon purity compared to PNCs with suppressed blinking. Furthermore, we quantitatively correlate the decrease in single photon purity with BC-blinking severity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Computational Determination of the Refractive Index of TATB, LLM-105, β-HMX, & α-RDX

In this study, we use Materials Studio CASTEP, an ab initio quantum mechanical (QM) program employing density functional theory (DFT), to compute the refractive index (RI) of solid energetic materials, specifically, PETN (tetragonal phase), TATB, LLM-105, β-HMX, and α-RDX. The use of quantum mechanical DFT methods affords the investigation of the optical mate rial properties of a system without the need for any experimental input. The RI values of PETN and TATB have been experimentally determined previously and are compared here to the QM derived RI values as validation of the theoretical approach in determining material optical proper ties. To date, experimental measurements to determine the RI values for LLM-105 have yet to be determined. This fact obviates the need to determine LLM-105 RI values using quantum mechanical means.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A&L Annual Report: Kapton Strength

Exploding Foil Initiator (EFI) systems function by launching a polymer flyer (often referred to as a slapper) at a high explosive (HE) pellet, which is intended to shock-initiate the HE. Flyer characteristics (e.g., shape, planarity, etc.) are extremely important in this respect, governing their ability to initiate the HE. Polymer models currently used in these systems are largely unvalidated, potentially compromising the integrity of magneto-hydrodynamic (MHD) predictions of EFI function. An improved EFI MHD modelling capability is expected to: (1) expedite optimization of EFI-based initiation system design, (2) enable consideration of EFI-related aging and corresponding lifetime predictions, and (3) potentially minimize the number of costly experiments required to certify EFI designs. To address this knowledge gap, several years ago we began a computational project to develop a higher-fidelity model for Kapton, a Polyimide copolymer most commonly employed as the flyer material in EFI devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Comparing the predictive capabilities of subjective crackle metrics using leave-one-out cross validation

Leave-one-out cross validation was used to show the capability to predict crackling sound quality based on the use of the standard deviation of the time-varying sharpness and the skewness of the derivative of the pressure waveform. The predictive output of this method implies that the more sophisticated fits used to describe this data were not overfit, but instead exhibited substantial predictive value.

Swift, Stephen Hales [Sandia National Laboratories↗