Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Finite Mixture Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Modeling Isothermal Reduction of Iron Ore Pellet Using Finite Element Analysis Method: Experiments & Validation

Iron ore pellet reduction experiments were performed with pure hydrogen (H2) and mixtures with carbon monoxide (CO) at different ratios. For direct reduction processes that switch dynamically between reformed natural gas and hydrogen as the reductant, it is important to understand the effects of the transition on the oxide reduction kinetics to optimize the residence time of iron ore pellets in a shaft reactor. Hence, the reduction rates were studied by varying experimental parameters such as the temperature (800, 850 & 900 °C), reactant gas flow rate (100, 150 & 200 cm3/min), pellet size and composition of the reactant gas mixture. The rate of reduction was observed to increase with an increase in temperature and reactant gas flow rate, but it decreased with an increase in pellet size. SEM greyscale analysis was performed to analyze the porosity and phase composition of partially reduced pellets. The porosity of the pellets was observed to increase from 0.3 for unreacted pellet to 0.42 for a completely reduced pellet. Energy-dispersive X-ray spectroscopy (EDAX) analysis was performed to identify the phases observed in the SEM images. The fraction of iron phase was observed to increase from the shell region of the pellet to the core region with an increase in the degree of reduction. A 2D-axisymmetric numerical model was developed on COMSOL Multiphysics, and it was validated using the conversion (X) vs. time curves obtained from each experiment. The model was able to accurately predict the total time needed for the complete conversion of a single iron ore pellet for multiple experiments. Effects of changes in the porosity and tortuosity of the pellet on the model were also studied and the rate of reduction was observed to be sensitive to changes in both porosity and tortuosity. The SEM analysis and the model results show that tortuosity is higher for pellets reduced with H2 than for pellets reduced with H2-CO gas mixtures.

08 HYDROGEN↗

A comparison of measured and calculated thermal stresses in a hybrid metal matrix composite spar cap element

A hybrid spar of titanium with an integrally brazed composite, consisting of an aluminum matrix reinforced with boron-carbide-coated fibers, was heated in an oven and the resulting thermal stresses were measured. Uniform heating of the spar in an oven resulted in thermal stresses arising from the effects of dissimilar materials and anisotropy of the metal matrix composite. Thermal stresses were calculated from a finite element structural model using anisotropic material properties deduced from constituent properties and rules of mixtures. Comparisons of calculated thermal stresses with measured thermal stresses on the spar are presented. It was shown that failure to account for anisotropy in the metal matrix composite elements would result in large errors in correlating measured and calculated thermal stresses. It was concluded that very strong material characterization efforts are required to predict accurate thermal stresses in anisotropic composite structures.

Jenkins, J. M.↗

Demonstration of Capability to Simulate Particle Irregular Shape and Poly-Disperse Mixtures Within Lunar Lander Plume-Surface Interaction

Plume-Surface Interaction (PSI) between lander engine plumes and regolith soil creates hazards in obscuration and contamination by particle clouds, high-energy ejecta streams, and landing area cratering damage. The MSFC Fluid Dynamics Branch is developing simulation tools to offer a predictive PSI capability to NASA customers such as the Human Lander System (HLS) and Commercial Lunar Payload Services (CLPS). The Gas-Granular Flow Solver (GGFS) is the main application tool for coupled gas-particle two-phase flow simulations to predict the range of PSI effects from onset of surface erosion to deep crater formation. GGFS features an Eulerian-Eulerian modeling approach, treating both gas and granular material as interacting continuum phases. Modeling the lunar regolith granular material fluidic characteristics poses special challenges due to complex particle shapes and mixture composition. The lunar regolith is poorly sorted with broad particle size distributions and large fines content. It has significant cohesion, due to interlocking jagged particle shapes. Eulerian granular material flow modeling requires closure formulations for the granular material constitutive models (stress, friction, collisional and kinetic energy dissipation, drag, etc.). While closure models for spherical particles are available from particle kinetic theory, closure models for realistic non-spherical particles must be extracted from unit physics Discrete Element Model (DEM) particle interaction simulations and provided in the form of tabular datasets. The effects of particle irregular shape (non-spherical shape factors, angular particle surface roughness, and interlocking features) are simulated by approximating the particle features in the form of grouped elemental spheres to form composite particles in the DEM simulations. The effects of the wide range of regolith mixture particle sizes and the strong effects of the presence of the small particle sizes results in high cohesion and low porosity of the regolith mixture. The range of particle sizes is simulated by binning the particle sizes into an appropriate finite number of particle-size species and solving the problem as a species mixture. Combining these two modeling approaches enables simulations to capture both, the contributions of the irregular particle shape and the particle size distribution. The integration and maturation of the DEM-based constitutive model database generation process and poly-disperse mixture binning approach into the GGFS simulation framework are proceeding under funding by the NASA Game Changing Development program. The status of current capabilities will be presented in comparisons of crater characteristics resulting for spherical and irregular shape particles, and for mono-, bi-, and tri-disperse mixture simulations of Apollo LM plume-surface interaction. The computational results confirm the significance of including the particle shape and mixture effects. Going forward plans for the full implementation of the general poly-disperse regolith modeling capability and maturation towards NASA project application readiness under the GCD program will be presented.

Peter A Liever↗

Demonstration of Capability to Simulate Particle Irregular Shape and Poly-Disperse Mixtures Within Lunar Lander Plume-Surface Interaction

Plume-Surface Interaction (PSI) between lander engine plumes and regolith soil creates hazards in obscuration and contamination by particle clouds, high-energy ejecta streams, and landing area cratering damage. The MSFC Fluid Dynamics Branch is developing simulation tools to offer a predictive PSI capability to NASA customers such as the Human Lander System (HLS) and Commercial Lunar Payload Services (CLPS). The Gas-Granular Flow Solver (GGFS) is the main application tool for coupled gas-particle two-phase flow simulations to predict the range of PSI effects from onset of surface erosion to deep crater formation. GGFS features an Eulerian-Eulerian modeling approach, treating both gas and granular material as interacting continuum phases. Modeling the lunar regolith granular material fluidic characteristics poses special challenges due to complex particle shapes and mixture composition. The lunar regolith is poorly sorted with broad particle size distributions and large fines content. It has significant cohesion, due to interlocking jagged particle shapes. Eulerian granular material flow modeling requires closure formulations for the granular material constitutive models (stress, friction, collisional and kinetic energy dissipation, drag, etc.). While closure models for spherical particles are available from particle kinetic theory, closure models for realistic non-spherical particles must be extracted from unit physics Discrete Element Model (DEM) particle interaction simulations and provided in the form of tabular datasets. The effects of particle irregular shape (non-spherical shape factors, angular particle surface roughness, and interlocking features) are simulated by approximating the particle features in the form of grouped elemental spheres to form composite particles in the DEM simulations. The effects of the wide range of regolith mixture particle sizes and the strong effects of the presence of the small particle sizes results in high cohesion and low porosity of the regolith mixture. The range of particle sizes is simulated by binning the particle sizes into an appropriate finite number of particle-size species and solving the problem as a species mixture. Combining these two modeling approaches enables simulations to capture both, the contributions of the irregular particle shape and the particle size distribution. The integration and maturation of the DEM-based constitutive model database generation process and poly-disperse mixture binning approach into the GGFS simulation framework are proceeding under funding by the NASA Game Changing Development program. The status of current capabilities will be presented in comparisons of crater characteristics resulting for spherical and irregular shape particles, and for mono-, bi-, and tri-disperse mixture simulations of Apollo LM plume-surface interaction. The computational results confirm the significance of including the particle shape and mixture effects. Going forward plans for the full implementation of the general poly-disperse regolith modeling capability and maturation towards NASA project application readiness under the GCD program will be presented.

Peter A. Liever↗

Numerical Modeling of Glaciers in Martian Paleoclimates

Numerous geologic features suggest the presence of ice flow on the surface of mars. These features include lobate debris aprons, concentric crater fill, and lineated valley fill. The lateral extent of these features can range from 100 meters to over 20 km. Previous work has demonstrated that these features could not have formed in current Martian conditions. It has long been speculated that changes in Mars orbital properties, namely its obliquity, eccentricity, and argument of perihelion, can result in dramatic changes to climate. Recent climate model studies have shown that at periods of increased obliquity north polar water ice is mobilized southward and deposited at low ad mid latitudes. Mid latitude accumulation of ice would provide the necessary conditions for rock glaciers to form. A time-marching, finite element glacier model is used to demonstrate the ability of ice and ice-rock mixtures to flow under Martian paleoclimate conditions. Input to this model is constrained by the NASA Ames Mars General Circulation Model (MGCM).

Colaprete, A.↗

Numerical Analysis of Cavitation-Induced Two-Phase Fluid Transients in Cryogenic Feedlines Using Finite Volume Procedure

This article presents a numerical investigation of the cavitation induced fluid transient in cryogenic feedline due to sudden closure of the valve A one dimensional numerical model based on finite volume procedure consisting of nodes and branches using Generalized Fluid System Simulation Program ( has been employed for the prediction of pressure variations The unsteady friction formulation accurately determines wall shear stress, and a homogeneous mixture model is used for two phase flow modeling Numerical results obtained with the present formulation are compared with experimental results and Method of Characteristic ( based results It is observed that low residual in flow variable calculation improves the solution providing numerically stable results GFSSP is able to reproduce the fluid transient peak due to vapor collapse Subsequently, it can retain the shape of pressure wave for two phase fluid transients, but it is dampening faster compared to experiments Further investigation is required with set of experiments to validate the present numerical approach for different experimental data.

Fluid Transient↗

Fluid hydrogen at high density - Pressure dissociation

A model for the Helmholtz free energy of fluid hydrogen at high density and high temperature is developed. This model aims at describing both pressure and temperature dissociation and ionization and bears directly on equations of state of partially ionized plasmas, as encountered in astrophysical situations and high-pressure experiments. This paper focuses on a mixture of hydrogen atoms and molecules and is devoted to the study of the phenomenon of pressure dissociation at finite temperatures. In the present model, the strong interactions are described with realistic potentials and are computed with a modified Weeks-Chandler-Andersen fluid perturbation theory that reproduces Monte Carlo simulations to better than 3 percent. Theoretical Hugoniot curves derived from the model are in excellent agreement with experimental data.

Saumon, Didier↗

Hierarchical Multiscale Process Modeling of A Textile Composite Y-Joint for the Aurora D8 Aircraft

Woven polymer matrix composites (PMCs) are widely used in aerospace applications for their favorable specific properties. However, the behavior of the inter- and intra-tow matrix during manufacturing of woven PMCs is difficult to isolate experimentally due to geometric and processing complexities. Classical closed-form homogenization approaches allow for composite thermos-chemo-mechanical properties to be characterized at any fiber volume fraction. In this work, virtual curing is applied to the inter- and intra-tow matrix materials of a plain weave repeating unit cell (RUC). Thermo-chemo-mechanical property evolution within the tows is calculated using the Concentric Cylinder Model (CCM) and the Rule of Mixtures (ROM). Curing is implemented through user-written subroutines within the commercial finite element method software Abaqus. Virtual curing results are compared with those from a linear-elastic thermal cool down simulation in Abaqus. Results indicate that tow property evolution during curing has a non-negligible effect on the final stress state.

curing↗

A non-linearly stable implicit finite element algorithm for hypersonic aerodynamics

A generalized curvilinear coordinate Taylor weak statement implicit finite element algorithm is developed for the two-dimensional and axisymmetric compressible Navier-Stokes equations for ideal and reacting gases. For accurate hypersonic simulation, air is modeled as a mixture of five perfect gases, i.e., molecular and atomic oxygen and nitrogen as well as nitric oxide. The associated pressure is then determined via Newton solution of the classical chemical equilibrium equation system. The directional semidiscretization is achieved using an optimal metric data Galerkin finite element weak statement, on a developed 'companion conservation law system', permitting classical test and trial space definitions. Utilizing an implicit Runge-Kutta scheme, the terminal algorithm is then nonlinearly stable, and second-order accurate in space and time on arbitrary curvilinear coordinates. Subsequently, a matrix tensor product factorization procedure permits an efficient numerical linear algebra handling for large Courant numbers. For ideal- and real-gas hypersonic flows, the algorithm generates essentially nonoscillatory numerical solutions in the presence of strong detached shocks and boundary layer-inviscid flow interactions.

Iannelli, G. S.↗

Pronghorn

Pronghorn is designed as a multi-dimensional coarse-mesh conjugate heat transfer simulator (tightly coupled fluid and solid phase heat transfer) for nuclear reactor core applications. Pronghorn’s design philosophy of is that: 1. The tool will be agnostic of reactor concept, including VHTRs, SFRs, FHRs, and LWRs. 2. Must be higher fidelity than traditional nuclear systems/safety analysis (0D-1D). 3. Avoid lower-length scale phenomena, such as boundary layer theory, i.e., rely on closure relations. 4. Apply mixture theory (homogenization) wherever possible. 5. Conserve mass and energy (solve all physics on single mesh). 6. Must be easily coupled to both MOOSE-based and external physics applications. 7. Does not require a super computer. Thus, Pronghorn’s algorithmic philosophy is to resolve large scale flow features and model lower-length scale phenomena, such as boundary layers. The coarse mesh approach for lower-length scale modeling is to develop a multi-component multi-phase homogenization of solid and liquid phases into a mixture formulation inside a finite element. For example, a pebble bed core is represented as a two-phase mixture of coolant and fuel pebbles, where the fuel phase is stationary. Thus, the solid phase exerts a drag force on the fluid phase, composed of form and viscous drag, and both phases exchange internal energy through conduction and convective heat transfer. For Pronghorn, the volume fraction of fluid can vary in space, but not in time. Pronghorn has been validated against the VHTR PBMR400 benchmark problems, used for rod ejection simulations have been conducted for thermal-fluids/neutronics for both pebble-bed and prismatic gas-cooled reactors and simple thermal-neutronics coupled LWR benchmark problems. Pronghorn flow models cover a wide range of transient and steady flow conditions, including, porous fluid flow, compressible flow, and nearly incompressible, thermally expansive flow. The physics can be solved in three-dimensional Cartesian coordinates and two-dimensional cylindrical (r-z) coordinates.

Martineau, RichardC.↗

Analyzing photovoltaic module mechanics using composite plate theories and finite element solutions

Deflection and stress calculated from an experimentally validated, high-fidelity finite element model (FEM) of a photovoltaic module experiencing mechanical load was compared to results from a simplified FEM treating the module laminate as a homogenized composite using a rule of mixtures approach, and further compared to analytical calculations treating the module as a Kirchoff-Love flat plate. The goal of this study was to determine the error incurred by analyzing module mechanics with varying levels of simplification, since resolving the aspect ratios of a module is computationally expensive. Homogenized FEMs were found to underpredict peak deflection under a 1.0 kPa load by between 13 and 19% for lower and upper bound application of the rule of mixtures. However, module shape was captured, implying that a useful replication of a resolved model could be achieved with a reduced, calibrated material stiffness. Homogenized stress results captured glass layer tensile stress components to within 46 to 52% at a sample location of interest, though agreement was poor through the remainder of the laminate due to the lack of material resolution. For plate theory, deflection was overpredicted by 45 to 67% for upper and lower bound homogenizations, and frame-adjacent module shapes were not adequately replicated. Stress results mirrored FEM trends but magnitudes were not well correlated to resolved model values. These results support the use of homogenized laminate models for module shape derivation, though resolved models remain necessary for stress analyses. The accuracy of plate theory was found to be inadequate for most applications.

14 SOLAR ENERGY↗

On implementation of EM-type algorithms in the stochastic models for a matrix computing on GPU

The paper discusses the main ideas of an implementation of EM-type algorithms for computing on the graphics processors and the application for the probabilistic models based on the Cox processes. An example of the GPU’s adapted MATLAB source code for the finite normal mixtures with the expectation-maximization matrix formulas is given. The testing of computational efficiency for GPU vs CPU is illustrated for the different sample sizes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carbon monoxide and oxygen combustion experiments: A demonstration of Mars in situ propellants

The feasibility of using carbon monoxide and oxygen as rocket propellants was examined both experimentally and theoretically. The steady-state combustion of carbon monoxide and oxygen was demonstrated for the first time in a subscale rocket engine. Measurements of experimental characteristic velocity, vacuum specific impulse, and thrust coefficient efficiency were obtained over a mixture ratio range of 0.30 to 2.0 and a chamber pressures of 1070 and 530 kPa. The theoretical performance of the propellant combination was studied parametrically over the same mixture ratio range. In addition to one dimensional ideal performance predictions, various performance reduction mechanisms were also modeled, including finite-rate kinetic reactions, two-dimensional divergence effects and viscous boundary layer effects.

Linne, Diane L.↗

Carbon monoxide and oxygen combustion experiments - A demonstration of Mars in situ propellants

The feasibility of using carbon monoxide and oxygen as rocket propellants was examined both experimentally and theoretically. The steady-state combustion of carbon monoxide and oxygen was demonstrated for the first time in a subscale rocket engine. Measurements of experimental characteristic velocity, vacuum specific impulse, and thrust coefficient efficiency were obtained over a mixture ratio range of 0.30 to 2.0 and a chamber pressures of 1070 and 530 kPa. The theoretical performance of the propellant combination was studied parametrically over the same mixture ratio range. In addition to one dimensional ideal performance predictions, various performance reduction mechanisms were also modeled, including finite-rate kinetic reactions, two-dimensional divergence effects and viscous boundary layer effects.

Linne, Diane L.↗

Multi-dimensional modeling of a thermal energy storage canister

The Solar Dynamic Power Module being developed for Space Station Freedom uses a eutectic mixture of LiF-CaF2 phase change material (PCM) contained in toroidal canisters for thermal energy storage. Presented are the results from heat transfer analyses of a PCM containment canister. One and two dimensional finite difference computer models are developed to analyze heat transfer in the canister walls, PCM, void, and heat engine working fluid coolant. The modes of heat transfer considered include conduction in canister walls and solid PCM, conduction and pseudo-free convection in liquid PCM, conduction and radiation across PCM vapor filled void regions, and forced convection in the heat engine working fluid. Void shape, location, growth or shrinkage (due to density difference between the solid and liquid PCM phases) are prescribed based on engineering judgment. The PCM phase change process is analyzed using the enthalpy method. The discussion of the results focuses on how canister thermal performance is affected by free convection in the liquid PCM and void heat transfer. Characterizing these effects is important for interpreting the relationship between ground-based canister performance (in 1-g) and expected on-orbit performance (in micro-g). Void regions accentuate canister hot spots and temperature gradients due to their large thermal resistance. Free convection reduces the extent of PCM superheating and lowers canister temperatures during a portion of the PCM thermal charge period. Surprisingly small differences in canister thermal performance result from operation on the ground and operation on-orbit. This lack of a strong gravity dependency is attributed to the large contribution of container walls in overall canister energy redistribution by conduction.

Kerslake, Thomas W.↗

A Computational and Experimental Study of Coflow Laminar Methane/Air Diffusion Flames: Effects of Fuel Dilution, Inlet Velocity, and Gravity

The influences of fuel dilution, inlet velocity, and gravity on the shape and structure of laminar coflow CH4-air diffusion flames were investigated computationally and experimentally. A series of nitrogen-diluted flames measured in the Structure and Liftoff in Combustion Experiment (SLICE) on board the International Space Station was assessed numerically under microgravity (mu g) and normal gravity (1g) conditions with CH4 mole fraction ranging from 0.4 to 1.0 and average inlet velocity ranging from 23 to 90 cm/s. Computationally, the MC-Smooth vorticity-velocity formulation was employed to describe the reactive gaseous mixture, and soot evolution was modeled by sectional aerosol equations. The governing equations and boundary conditions were discretized on a two-dimensional computational domain by finite differences, and the resulting set of fully coupled, strongly nonlinear equations was solved simultaneously at all points using a damped, modified Newton's method. Experimentally, flame shape and soot temperature were determined by flame emission images recorded by a digital color camera. Very good agreement between computation and measurement was obtained, and the conclusions were as follows. (1) Buoyant and nonbuoyant luminous flame lengths are proportional to the mass flow rate of the fuel mixture; computed and measured nonbuoyant flames are noticeably longer than their 1g counterparts; the effect of fuel dilution on flame shape (i.e., flame length and flame radius) is negligible when the flame shape is normalized by the methane flow rate. (2) Buoyancy-induced reduction of the flame radius through radially inward convection near the flame front is demonstrated. (3) Buoyant and nonbuoyant flame structure is mainly controlled by the fuel mass flow rate, and the effects from fuel dilution and inlet velocity are secondary.

flames↗

A Study of Cavitation-Ignition Bubble Combustion

We present the results of an experimental and computational study of the physics and chemistry of cavitation-ignition bubble combustion (CIBC), a process that occurs when combustible gaseous mixtures are ignited by the high temperatures found inside a rapidly collapsing bubble. The CIBC process was modeled using a time-dependent compressible fluid-dynamics code that includes finite-rate chemistry. The model predicts that gas-phase reactions within the bubble produce CO and other gaseous by-products of combustion. In addition, heat and mechanical energy release through a bubble volume-expansion phase are also predicted by the model. We experimentally demonstrate the CIBC process using an ultrasonically excited cavitation flow reactor with various hydrocarbon-air mixtures in liquid water. Low concentrations (< 160 ppm) of carbon monoxide (CO) emissions from the ultrasonic reactor were measured, and found to be proportional to the acoustic excitation power. The results of the model were consistent with the measured experimental results. Based on the experimental findings, the computational model, and previous reports of the "micro-diesel effect" in industrial hydraulic systems, we conclude that CIBC is indeed possible and exists in ultrasonically- and hydrodynamically-induced cavitation. Finally, estimates of the utility of CIBC process as a means of powering an idealized heat engine are also presented.

Nguyen, Quang-Viet↗

Navier-Stokes calculations of scramjet-afterbody flowfields

Scramjet simulant-gas exhaust flows are computed using two-dimensional Navier-Stokes (NS) equations. The NS equations are solved using an implicit, upwind, finite-volume scheme, and the Reynolds stresses are modeled algebraically. The solutions are compared with experimental data where the freestream and the nozzle exhaust fluids are air. The NS equations for the flow, where the scramjet exhaust simulant gas is a mixture of Freon-12 and argon, are solved by an explicit, finite difference scheme. The results are compared with experimental data, and certain discrepancies are explained.

Baysal, O.↗