Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Filter Tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Hybridization of IMC and PID control structures based on filtered GPC using genetic algorithm

Classical and advanced hybridization methods are employed in the control literature to calibrate the tuning parameters of internal model control (IMC) and proportional-integral-derivative (PID) controllers. This paper presents an alternative tuning design for the generalized predictive controller (GPC) that is based on both the positional process model and cost function. The proposed method involves the selection of an integral polynomial weighting filter for reference and output signals to deal with reference tracking, disturbance rejection, model-plant mismatch (MPM), minimum control energy and closed-loop robustness. The filter positional GPC (FP-GPC) obtained is transformed into a two-degree-of-freedom polynomial filtered RST structure and then into filtered internal model control (F-IMC) and PID controllers. Also, a multi-objective optimization based on genetic algorithm is applied to tune the filter parameters. Numerical and experimental essays show the effectiveness of the proposed control methodology.

97 MATHEMATICS AND COMPUTING↗

Tunable repetitively pulsed Cr{sup 2+} : ZnSe laser

Methods of wavelength tuning of a polycrystalline Cr{sup 2+} : ZnSe laser pumped by a repetitively pulsed Tm : YLF laser (pulse duration {approx}100 ns, pulse repetition rate 3 KHz) are studied. With the use of a prism selector, the laser wavelength was tuned within the range of 2070 - 2400 nm at a linewidth of 11 nm for a SiO{sub 2} prism and 30 nm for a CaF{sub 2} prism. The use of a Lyot filter made it possible to tune the Cr{sup 2+} : ZnSe laser wavelength (with replacement of the cavity mirrors) within the spectral ranges of 2130 - 2400 and 2530 - 2750 nm at a linewidth of 4 nm. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New opportunities in microwave electronics with ferromagnetic nanowires

A series of monolithic tunable microwave band-stop filters and phase shifters have been designed, fabricated, and characterized on arrays of ferromagnetic nanowires (FMNWs) constituted of Ni, Co, CoFeB, and NiFe alloy embedded in anodic alumina templates (AAO). The aim of the present investigation is to significantly boost the operating frequency of devices in very low applied magnetic field. The stop-band response can cover from 8 to 40 GHz with an applied magnetic field up to 5 kOe using these materials. In addition, we observed a substantial increase in frequency tunability (>110%) for Ni and NiFe alloy based filter. Frequency bandwidth/linewidth can be tuned with the proper choice of magnetic material, broad band for Co nanowires to narrow band for CoFeB nanowires. The amorphous nature of CoFeB reduces linewidth considerably and hence increases resonance absorption. It is also observed that the frequency linewidth (Δf) decreases with increasing applied magnetic field. The same filter can be used as a tunable phase shifter. For Ni nanowire based phase shifter, a maximum shift of 75°/cm at 4 kOe was observed.

36 MATERIALS SCIENCE↗

Fast Local Spatial Verification for Feature-Agnostic Large-Scale Image Retrieval

Images from social media can reflect diverse viewpoints, heated arguments, and expressions of creativity, adding new complexity to retrieval tasks. Researchers working on Content-Based Image Retrieval (CBIR) have traditionally tuned their algorithms to match filtered results with user search intent. However, we are now bombarded with composite images of unknown origin, authenticity, and even meaning. With such uncertainty, users may not have an initial idea of what the search query results should look like. For instance, hidden people, spliced objects, and subtly altered scenes can be difficult for a user to detect initially in a meme image, but may contribute significantly to its composition. It is pertinent to design systems that retrieve images with these nuanced relationships in addition to providing more traditional results, such as duplicates and near-duplicates — and to do so with enough efficiency at large scale. In this work, we propose a new approach for spatial verification that aims at modeling object-level regions using image keypoints retrieved from an image index, which is then used to accurately weight small contributing objects within the results, without the need for costly object detection steps. We call this method the Objects in Scene to Objects in Scene (OS2OS) score, and it is optimized for fast matrix operations, which can run quickly on either CPUs or GPUs. It performs comparably to state-of-the-art methods on classic CBIR problems (Oxford 5K, Paris 6K, and Google-Landmarks), and outperforms them in emerging retrieval tasks such as image composite matching in the NIST MFC2018 dataset and meme-style imagery from Reddit.

42 ENGINEERING↗

Optofluidic-Tunable Color Filters And Spectroscopy Based On Liquid-Crystal Microflows

The integration of color filters with microfluidics has attracted substantial attention in recent years, for on-chip absorption, fluorescence, or Raman analysis. We describe such tunable filters based on the micro-flow of liquid crystals. The filter operation is based on the wavelength dependent liquid crystal birefringence that can be tuned by modifying the flow velocity field in the microchannel. The latter is possible both temporally and spatially by varying the inlet pressure and the channel geometry respectively. We explored the use of these optofluidic filters for on-chip absorption spectroscopy; by integrating the distance dependent color filter with a dye-filled micro-channel, the absorption spectrum of a dye could be measured. Liquid crystal microflows simplify substantially the optofluidic integration, actuation and tuning of color filters for lab-on-a-chip spectroscopic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tunable diode-pumped single-frequency travelling-wave Nd : YAG laser operating at 1319 nm

A single-frequency travelling-wave Nd:YAG laser with a wide wavelength tuning range achieved due to the use of a temperature-controlled intracavity KTP filter is studied. The output laser characteristics and the frequency tuning range are presented for different operation regimes. A tuning range of 90 GHz with a tuning rate of 12 GHz Degree-Sign C is for the first time achieved for Nd :YAG lasers operating at a wavelength of 1319 nm. The output power in the centre of the gain line was {approx} 240 mW. The laser can be used in spectroscopy and metrology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microwave photonic filter using multiwavelength Brillouin-erbium fiber laser with double-Brillouin-frequency shift

A microwave photonic filter based on double-Brillouin-frequency spaced multiwavelength Brillouin-erbium fiber laser (BEFL) is experimentally demonstrated. The filter selectivity can be easily adjusted by tuning and apodizing the optical taps generated from the multiwavelength BEFL. Reconfiguration of different frequency responses are demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Additively Manufactured Interdigital Filters for Ultra- Wideband Radar

Abstract— In this paper, we present the development of ultrawideband (UWB) inter-digital cavity filters manufactured with an additive technique. We employed a selective laser melting process with stainless steel via a “flipping and fixturing” approach to achieve dimensional accuracy and frequency selectivity (no postfabrication tuning) comparable to that of conventional micromachining. The filters operate at a center frequency of 3.75 GHz and 6 GHz, respectively, with an instantaneous bandwidth of 2 GHz. This paper presents design and fabrication details, a discussion of measured characteristics for both filters, and a performance comparison with respect to subtractively manufactured parts.

Keywords— Interdigital filters, UWB radar, additiv↗

A 1.2-V 6-GHz Dual-Path Charge-Pump PLL Frequency Synthesizer for Quantum Control and Readout in CMOS 65-nm Process

This paper presents a low jitter dual-path chargepump phase locked loop (PLL) synthesizer in a CMOS 65-nm process for quantum readout applications. The PLL incorporates a programmable dual chargepump and a loop filter with both proportional and integral paths that can be driven independently providing flexible control of the loop bandwidth to achieve low jitter performance. The design is implemented at 300 K and critical blocks like voltage-controlled oscillator (VCO) and chargepump (CP) are analyzed at 77 K based on the characterized results. The LC-VCO is realized with the class-C NMOS only architecture with 5-bit coarse control and quadrature signals are generated with poly phase filter. The VCO is designed with the tuning range of 1 GHz around the center frequency of 6 GHz with Phase Noise of -123 dBc/Hz and -132 dBc/Hz at 1MHz offset at 300 K and 77 K temperature. The simulated PLL rms jitter is 125 fs at 6 GHz with a power consumption of 8 mW at the 1.2 V power supply.

47 OTHER INSTRUMENTATION↗

Investigation into the ways of tuning parametric oscillators of visible and IR ranges

Different versions of optical parametric oscillator (OPO) schemes were experimentally realised and investigated, which utilise AgGaS{sub 2}, LiNbO{sub 3} and HgGa{sub 2}S{sub 4} single crystals as well as an Hg{sub 1-x}Cd{sub x}Ga{sub 2}S{sub 4} solid solution. The OPOs generate radiation in the 1.2-5.7-{mu}m range and make use of different ways of output wavelength tuning, including fast wavelength tuning (in a time shorter than 0.1 ms) with the help of an acoustooptical deflector. The output spectral line was narrowed by means of an intracavity acoustooptical filter. An OPO for the visible range with an electrodynamic tuning to an arbitrary wavelength in this range in a time of 5ms was implemented employing a BBO single crystal. (invited paper)

36 MATERIALS SCIENCE↗

Tuning Luminescent Converters Based on Coumarins and Their Photostability

We have studied the feasibility of using luminophores in the coumarin series in luminescent filters for correcting the spectra of light-emitting diode (LED) light sources. Fine tuning of the emission spectra of luminophores in polymer matrices is achieved by introducing nonionic surfactants into the matrix. We propose a method for estimating the photostability of luminescent filters and we determine the photostability parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Semiconductor lasers with a continuous tuning range above 100 nm in the nearest IR spectral region

We have developed two new types of lasers based on quantum-confined semiconductor optical amplifiers with an acousto-optic tunable filter in an external fibre ring cavity. The lasers offer continuous wavelength tuning ranges from 780 to 885 and from 880 to 1010 nm, 20 mW of cw output power, and a tuning rate up to 10{sup 4} nm s{sup -1} at an instantaneous spectral linewidth less than 0.1 nm. (lasers)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Generalized Framework for Auto-tuning Stencil Computations

This work introduces a generalized framework for automatically tuning stencil computations to achieve superior performance on a broad range of multicore architectures. Stencil (nearest-neighbor) based kernels constitute the core of many important scientific applications involving block-structured grids. Auto-tuning systems search over optimization strategies to find the combination of tunable parameters that maximizes computational efficiency for a given algorithmic kernel. Although the auto-tuning strategy has been successfully applied to libraries, generalized stencil kernels are not amenable to packaging as libraries. Studied kernels in this work include both memory-bound kernels as well as a computation-bound bilateral filtering kernel. We introduce a generalized stencil auto-tuning framework that takes a straightforward Fortran expression of a stencil kernel and automatically generates tuned implementations of the kernel in C or Fortran to achieve performance portability across diverse computer architectures.

97 MATHEMATICS AND COMPUTING↗

A Generalized Framework for Auto-tuning Stencil Computations

This work introduces a generalized framework for automatically tuning stencil computations to achieve superior performance on a broad range of multicore architectures. Stencil (nearest-neighbor) based kernels constitute the core of many important scientific applications involving block-structured grids. Auto-tuning systems search over optimization strategies to find the combination of tunable parameters that maximizes computational efficiency for a given algorithmic kernel. Although the auto-tuning strategy has been successfully applied to libraries, generalized stencil kernels are not amenable to packaging as libraries. Studied kernels in this work include both memory-bound kernels as well as a computation-bound bilateral filtering kernel. We introduce a generalized stencil auto-tuning framework that takes a straightforward Fortran expression of a stencil kernel and automatically generates tuned implementations of the kernel in C or Fortran to achieve performance portability across diverse computer architectures.

97 MATHEMATICS AND COMPUTING↗

Region of Interest Filter in DUNE DAQ

The Deep Underground Neutrino Experiment (DUNE) is the next generation neutrino experiment currently under construction. It consists of a broadband neutrino beam at Fermilab, a high precision near detector, and the largest liquid argon time projection chamber far detector ever designed at the Sanford Underground Research Facility (SURF). The Region of Interest (ROI) filter is designed for DUNE’s online Data Acquisition (DAQ) system to address data rate constraints and enable low energy physics in the <10 MeV range. The filter employs zero suppression on the detector signal, and by tuning the readout window and threshold the data rates can be reduced by >90%. Performance of the ROI is analyzed in LArsoft on MARLEY generated low energy MC events propagated through the detector simulation. Notably, the optimized ROI filter enables a lower trigger threshold for readout at ~5-10 MeV, allowing DUNE to explore low-energy physics, specifically focusing on solar boron 8 neutrinos which are relevant in this energy range. This advancement enhances DUNE's scientific capabilities, opening avenues for detailed analyses of previously inaccessible low-energy neutrino interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Single-walled carbon nanotube tunable mode-locked soliton fibre laser

A soliton fibre laser with a tunable mode-locked output is proposed and demonstrated. The laser is based on a conventional erbium-doped fibre and uses single-walled carbon nanotubes (SWCNTs) as a saturable absorber (SA). Tuning is performed using a tunable Mach – Zehnder filter (TMZF). The SWCNT-based SA has a modulation depth of ∼19.0 % and saturation intensity of 45.3 MW cm{sup −2}. Mode-locking begins at a pump power of 6.0 mW and allows pulsed outputs to be generated from 1550 nm to 1566 nm. The 3 dB bandwidth and pulse duration of the output pulse vary slightly from 6.34 nm to 6.90 nm and from 0.51 ps to 0.56 ps, respectively, which results in the corresponding time-bandwidth product varying from 0.40 to 0.46. The results suggest that the proposed laser would have significance advantages in many applications, particularly spectroscopy and telecommunications. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gate-tunable valley-spin filtering in silicene with magnetic barrier

We theoretically study the valley- and spin-resolved scattering through magnetic barrier in a one layer thick silicene, using the mode-matching method for the Dirac equation. We show that the spin-valley filtering effect can be achieved and can also be tuned completely through both a top and bottom gate. Moreover, when reversing the sign of the staggered potential, we find the direction of the valley polarization is switched while the direction of spin polarization is unchanged. These results can provide some meaningful information to design valley valve residing on silicene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗