Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FeO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Bulk composition of the Moon in the context of models for condensation in the solar nebula

The FeO content of the Moon is substantially higher than the present FeO content of the Earth's mantle. If the Moon formed by fission from the Earth's mantle, then the conclusion that the Earth's mantle must have been much richer in FeO at the time of fission appears firm. If the Moon formed independently in geocentric orbit, then the FeO contents of the two bodies should be similar, because both would be accreting from the same source of silicate material. Therefore, Earth's mantle at the time of lunar formation probably had an FeO content quite similar to the present FeO content of the Moon. This conclusion, if valid, has profound implications in two areas: (1) the differentiation history of the Earth's mantle and core; and (2) the processes responsible for governing the bulk compositions of the terrestrial planets. If Earth had more FeO than previously thought, then the composition differences between Earth and Mars are less than previously believed. This suggests that condensation temperature and heliocentric distance may have been less important in governing planetary compositions and other mechanisms, including iron/silicate fractionation may have been more important. The implication of this model for the compositions of the Moon and the other terrestrial planets are discussed.

Goettel, K. A.↗

Troilite in the Chondrules of Type-3 Ordinary Chondrites: Implications for Chondrule Formation

The presence of primary troilite in chondrules requires that nebular temperatures were <650 K (the 50% condensation temperature of S) at the time of chondrule formation and that chondrules were molten for periods short enough (less than or equal to 10 s) to avoid significant volatilization of S. We examined 226 intact chondrules of all textural types from eight unshocked to weakly shocked ordinary chondrite falls of low petrologic type to determine the origin of troilite in chondrules; 68 chondrules are from LL3.0 Semarkona. There is a high probability that troilite is primary (i.e , was present among the chondrule precursors) if it is completely embedded in a mafic silicate phenocryst, located within one-half radius of the apparent chondrule center and is part of an opaque assemblage with an igneous texture Based on these criteria, 13% of the chondrules in Semarkona and in the set as a whole contain primary troilite. Most of the remaining chondrules contain troilite that is probably primary, but does not meet all three criteria. Troilite occurs next to tetratacnite in some opaque spherules within low-FeO chondrules in Semarkona, implying that the Ni required to form the tetrataenite came from the troilite Troilite can accommodate 5 mg/g Ni at high temperatures (> 1170 K) but much less Ni at lower temperatures; because this is far higher than the metamorphic temperature inferred for Semarkona (approx. 670 K), the troilite must be primary Primary troilite fitting the three criteria occurs in a smaller fraction of low-FeO [FeO/(FeO + MgO) in olivine and/or low-Ca pyroxene not greater than 0.0751 than high-FeO porphyritic chondrules in Semarkona (9% vs 33%) Coarse-grained low-FeO porphyritic chondrules appear to contain somewhat more troilite on average than those of medium grain size We found a few troilite-free, metallic-Fe-Ni-bearing, low-FeO chondrules that contain Na2O-bearing augite and Na2O- and K2O-rich mesostasis; these chondrules were probably formed after ambient nebular temperatures cooled below 910 K (the 50% condensation temperature of Na) and before they reached 650 K Literature reports of rare fayalitic microchondrules in the rims around a few normal-size chondrules suggest that chondrule formation persisted until nebular temperatures cooled below 500 K Secondary troilite occurs in a few percent of Semarkona chondrules as thin veins mobilized by shock; troilite or pyrrhotite in the outer portions of some chondrules occur within opaque assemblages containing magnetite, carbide, Ni-rich sulfide, awaruite, and Co-rich kamacite produced by parent-body hydrothermal alteration.

Rubin, Alan E.↗

A Relict-Grain-Bearing Porphyritic Olivine Compound Chondrule from LL3.0 Semarkona that Experienced Limited Remelting

Chondrule D8n in LL3.0 Semarkona is a porphyritic olivine (PO) chondrule, 1300 x 1900 microns in size, with a complicated thermal history. The oldest recognizable portion of D8n is a moderately high-FeO, PO chondrule that is modeled as having become enmeshed in a dust ball containing a small, intact, low-FeO porphyritic chondrule and fine-grained material consisting of forsterite, kamacite, troilite, and possibly reduced C. The final chondrule melting event may have been a heat pulse that preferentially melted the low-FeO material and produced a low-FeO, opaque-rich, exterior region, 45-140 microns in thickness, around the original chondrule. Ai one end of the exterior region, a kamacite- and troilite-rich lump 960 pm in length formed. During the final melting event, the coarse, moderately ferroan olivine phenocrysts within the original chondrule appear to have been partly resorbed (These relict phenocrysts have the highest concentrations of FeO, MnO, and Cr2O3-7.5, 0.20, and 0.61 wt%, respectively-in D8n.). Narrow olivine overgrowths crystallized around the phenocrysts following final chondrule melting; their compositions seem to reflect mixing between melt derived from the exterior region and the resorbed margins of the phenocrysts. During the melting event, FeO in the relict phenocrysts was reduced, producing numerous small blebs of Ni-poor metallic Fe along preexisting curvilinear fractures. The reduced olivine flanking the trails of metal blebs has lower FeO than the phenocrysts but virtually identical MnO and Cr2O3 contents. Subsequent parent-body aqueous alteration in the exterior region of the chondrule formed pentlandite and abundant magnetite.

Rubin, Alan E.↗

High pressure-temperature electrical conductivity of magnesiowustite as a function of iron oxide concentration

The electrical conductivity of (Mg, Fe)O magnesiowustite containing 9 and 27.5 mol pct FeO has been measured at simultaneously high pressures (30-32 GPa) and temperatures using a diamond anvil cell heated with a continuous wave Nd:YAG laser and an external resistance heater. The conductivity depends strongly on the FeO concentration at both ambient and high pressures. At the pressures and temperatures of about 30 GPa and 2000 K, conditions expected in the lower mantle, the magnesiowustite containing 27.5 percent FeO is 3 orders of magnitude more conductive than that containing 9 percent FeO. The activation energy of magnesiowustite decreases with increasing iron concentration from 0.38 (+ or - 0.09) eV at 9 percent FeO to 0.29 (+ or - 0.05) eV at 27.5 percent FeO.

Li, Xiaoyuan↗

Evidence in CO3.0 Chondrules for a drift in the O Isotopic Composition of the Solar Nebula

Several recent studies have shown that materials such as magnetite that formed in asteroids tend to have higher Delta O-17 (=delta O-17 -0.52 delta O-18) values than those recorded in unaltered chondrules. Other recent studies have shown that, in sets of chondrules from carbonaceous chondrites, Delta O-17 tends to increase as the FeO contents of the silicates increase. We report a comparison of the O isotopic composition of olivine phenocrysts in low-FeO ( Fal5) type II porphyritic chondrules in the highly primitive C03.0 chondrite Yamato-81020. In agreement with a similar study of chondrules in C03.0 ALH A77307 by Jones et al., Delta O-17 tends to increase with increasing FeO. We find that Delta O-17 values are resolved (but only marginally) between the two sets of olivine phenocrysts. In two of the high-FeO chondrules, the difference between Delta O-17 of the late-formed, high-FeO phenocryst olivine and those in the low-FeO cores of relict grains is well-resolved (although one of the relicts is interpreted to be a partly melted amoeboid olivine inclusion by Yurimoto and Wasson). It appears that, during much of the chondrule-forming period, there was a small upward drift in the Delta O-17 of nebular solids and that relict cores preserve the record of a different (and earlier) nebular environment.

Wasson, John T.↗

Iron Redox Systematics of Martian Magmas

Martian magmas are known to be FeO-rich and the dominant FeO-bearing mineral at many sites visited by the Mars Exploration rovers (MER) is magnetite [1]. Morris et al. [1] propose that the magnetite appears to be igneous in origin, rather than of secondary origin. However, magnetite is not typically found in experimental studies of martian magmatic rocks [2,3]. Magnetite stability in terrestrial magmas is well understood, as are the stability of FeO and Fe2O3 in terrestrial magmas [4,5]. In order to better understand the variation of FeO and Fe2O3, and the stability of magnetite (and other FeO-bearing phases) in martian magmas we have undertaken an experimental study with two emphases. First we document the stability of magnetite with temperature and fO2 in a shergottite bulk composition. Second, we determine the FeO and Fe2O3 contents of the same shergottite bulk composition at 1 bar and variable fO2 at 1250 C, and at variable pressure. These two goals will help define not only magnetite stability, but pyroxene-melt equilibria that are also dependent upon fO2.

Righter, K.↗

Unusual Iron Redox Systematics of Martian Magmas

Martian magmas are known to be FeO-rich and the dominant FeO-bearing mineral at many sites visited by the Mars Exploration rovers (MER) is magnetite. Morris et al. proposed that the magnetite appears to be igneous in origin, rather than of secondary origin. However, magnetite is not typically found in experimental studies of martian magmatic rocks. Magnetite stability in terrestrial magmas is well understood, as are the stabilities of FeO and Fe2O3 in terrestrial magmas. In order to better understand the variation of FeO and Fe2O3, and the stability of magnetite (and other FeO-bearing phases) in martian magmas, we have undertaken an experimental study with two emphases. First, we determine the FeO and Fe2O3 contents of super- and sub-liquidus glasses from a shergottite bulk composition at 1 bar to 4 GPa, and variable fO2. Second, we document the stability of magnetite with temperature and fO2 in a shergottite bulk composition.

Danielson, L.↗

Pyroclastic Deposits in the Floor-fractured Crater Alphonsus

Alphonsus, the 118 km diameter floor-fractured crater, is located immediately east of Mare Nubium. Eleven pyroclastic deposits have been identified on the crater's floor. Early telescopic spectra suggest that the floor of Alphonsus is noritic, and that the pyroclastic deposits contain mixtures of floor material and a juvenile component including basaltic glass. Head and Wilson contend that Nubium lavas intruded the breccia zone beneath Alphonsus, forming dikes and fractures on the crater floor. In this model, the magma ascended to the level of the mare but cooled underground, and a portion broke thru to the surface in vulcanian (explosive) eruptions. Alternatively, the erupted material could be from a source unrelated to the mare, in the style of regional pyroclastic deposits. High-resolution images and spectroscopy from the Moon Mineralogy Mapper (M3), Diviner Lunar Radiometer, and Lunar Reconnaissance Orbiter Camera Narrow Angle Camera (NAC) provide data to test these formation models. Spectra from M3 confirm that the crater floor is primarily composed of noritic material, and that the Nubium lavas are basaltic. Spectra from the three largest pyroclastic deposits in Alphonsus are consistent with a minor low- Ca pyroxene component in a glass-rich matrix. The centers of the 2 micron absorption bands have wavelengths too short to be of the same origin as the Nubium basalts. Diviner Christiansen feature (CF) values were used to estimate FeO abundances for the crater floor, Nubium soil, and pyroclastic deposits. The estimated abundance for the crater floor (7.5 +/- 1.4 wt.%) is within the range of FeO values for Apollo norite samples. However, the estimated FeO abundance for Nubium soil (13.4 +/- 1.4 wt.%) is lower than those measured in most mare samples. The difference may reflect contamination of the mare soil by highland ejecta. The Diviner-derived FeO abundance for the western pyroclastic deposit is 13.8 +/- 3.3 wt.%. This is lower than the values for mare soil samples, but within the range of analyzed pyroclastic glasses. The NAC images of the pyroclastic vents highlight their bright wall materials. The M3 spectra of the southeastern vent indicate that this bright material is noritic, likely crater floor material exposed by explosive eruption. These observations address the hypothesis that Nubium lavas intruded the fracture network beneath Alphonsus, leading to localized vulcanian-style eruptions. This model implies that the eruption products should be dominated by crystalline basalt fragments similar in elemental composition and mineralogy to mare lavas. The bright noritic material exposed in the vent walls is consistent with explosive eruptions. The estimated FeO abundances for the pyroclastic deposits are too low to be consistent with FeO abundances measured in mare basalts, but are within the range of pyroclastic glass samples. The visible- to near-infrared (VIS-NIR) spectra of the pyroclastic deposits and Nubium soils are significantly different, suggesting that the pyroclastics are unrelated to the mare basalts. The pyroclastic spectra are consistent with Fe-bearing glass plus small amounts of noritic wall rock. Similar glassy materials dominate regional pyroclastic deposits, suggesting a deep source for the pyroclastics observed in Alphonsus.

Allen, Carlton C.↗

The influence of bulk composition and dynamic melting conditions on olivine chondrule textures

The effects of the bulk composition and the dynamic melting conditions on the texture of olivine chondrules were investigated in a series of heating experiments. It is shown that variations in the olivine chondrule textures can be produced by varying the FeO/(FeO + MgO) ratio between the average Type IA and Type II chondrule compositions, could affect the texture of a chondrule at a constant initial melting temperature and heating time. A range of the heating times and the masses of precursor spheres caused variations in the degree of melting and in chondrule textures. Chondrule textures were distributed on a graph of initial temperatures vs. FeO/(FeO + MgO) ratios as bands parallel to the olivine disappearance curve. This graph could be used to predict chondrule textures from Fe/(FeO + MgO) ratios at specific initial melting temperatures.

Connolly, Harold C., Jr.↗

Crystallization of plagioclase in mare basalts

A detailed study has been made of the morphology, zoning and major- and minor-element chemistry of plagioclase in mare basalt 12021 and for comparison, in several other mare basalts. Two types of plagioclase can be distinguished based on growth rate as expressed by the formation of hollow as opposed to lath-shaped crystals. The liquidus plagioclase is the most sodic part of the hollow crystals and is more sodic than the lath-shaped crystals. Hollow grains show oscillatory zoning, whereas the lath-shaped grains show normal zoning. The ratios FeO/(FeO + MgO) and K2O/(K2O + Na2O) increased in both types of plagioclase as they grew, and these ratios can be used as a guide to the crystallization history of the plagioclase. The FeO/(FeO + MgO) ratios are similar to those of coprecipitating pyroxene. The data presented here suggest the onset of plagioclase nucleation is primarily controlled by magma composition, and the point at which the magma becomes supersaturated with plagioclase.

Crawford, M. L.↗

Ferromagnetic resonance and magnetic studies of cores 60009/60010 and 60003 - Compositional and surface-exposure stratigraphy

Ferromagnetic resonance and static magnetic measurements were made on 131 samples from core 60009/60010 and on 40 samples from section 60003 of the Apollo 16 deep drill core. These studies provided depth profiles for composition, in terms of the concentration of FeO, and relative surface exposure age (or maturity), in terms of the values of the specific FMR intensity normalized to the FeO content. For core 60009/60010, the concentration of FeO ranged from about 1.6 wt.% to 5.8 wt.% with a mean value of 4.6 wt.% and the maturity ranged from immature to mature with most of the soils being submature. A systematic decrease in maturity from the lunar surface to a depth of about 12.5 cm was observed in core section 60010. For core section 60003, the concentration of FeO ranged from about 5.2 wt.% to 7.5 wt.% with a mean value of 6.4 wt.% and the maturity ranged from submature to mature with most of the soils being mature.

Morris, R. V.↗

Characterization and depositional and evolutionary history of the Apollo 17 deep drill core

With a depth resolution of about 0.5 cm, the stratigraphy of the approximately 3 m Apollo 17 deep drill core by measurement of the total FeO concentration is characterized along with the FMR surface exposure (maturity) index Is/FeO, the metallic iron concentration Fe-vsm, and the FMR linewidth delta-H. For stratigraphic characterization, the first two parameters are the most important. Most of the core is characterized by a FeO concentration of approximately 15.5 wt. %; there is a more mafic zone in the upper approximately 75 cm where the maximum FeO concentration is approximately 18.5 wt. %, and a more felsic zone between approximately 225 and 260 cm where the minimum FeO concentration is approximately 14.0%. As indicated by Is/FeO, most of the soil in the core is submature to mature; the only immature zone is located between approximately 20 and 60 cm and is one of the most distinctive features in the core. A two stage model for the depositional and evolutionary history of the Apollo 17 deep drill core is proposed: (1) deposition by one event approximately 110 m.y. ago or deposition by a sequence of closely spaced events initating a maximum of approximately 200 m.y. ago and terminating approximately 110 m.y. ago, (2) in situ reworking (gardening) to a depth of approximately 26 cm in the period between approximately 110 m.y. ago and the present day.

Morris, R. V.↗

The solar nebula redox state as recorded by the most reduced chondrules of five primitive chondrites

Mafic minerals in the most reduced chondrules of five primitive meteorites were analyzed with an electron microprobe to determine the lower limit on their FeO contents. The accuracy obtained was + or - 0.01 weight percent FeO. The thermodynamic relationship between mole fraction FeSiO3 and pO2 of the ambient nebular gas at the time of mineral equilibration was established, and was used to infer the local O/H ratio of the nebular gas during chondrule formation. The lowest ferrosilite compositions reflected equilibration at 1500 K with a gas 2-18 times more oxidizing than a gas of solar composition. Olivines in low-FeO unequilibrated ordinary chondrites (UOC) chondrules are uniformly more FeO-rich than coexisting pyroxenes. This discrepancy suggests that a significant change in the O/H ratio of the nebular gas occurred between the time of olivine and pyroxene crystallization in the region of the nebula where UOCs formed. Mineral compositions in the chondrules of two C2 chondrites studied suggest they formed in a more homogeneous region of the nebula than the UOCs.

Johnson, M. C.↗

Petrographic Evidence for Rapid Heating and Cooling During Chrondrule Formation

The chondrule cooling rates used in most chondrule-formation models appear to be too low. Recent petrographic evidence indicates that the amount of crystal (especially olivine) growth that occurred after the last melting event was about 30 smaller than the grain sizes simulated in order to estimate cooling rates. The smaller amount of growth leads to an upwards revision of cooling rates by about a factor of 1000. Most chondrules are porphyritic. They consist of large and small crystals of olivine and, less commonly, pyroxene immersed in a mesostasis having a plagioclase-rich composition. In the most primitive chondrites the mesostasis is often vitreous. Because the large majority of chondrules contain FeS, it is clear that the nebula had cooled below the FeS condensation temperature (ca. 650 K) before chondrule formation occurred. The high FeO/(FeO+MgO) ratios of some chondrules require still lower nebular temperatures (less than 500 K). The traditional view has been that porphyritic chondrules formed in a single heating/cooling event and many laboratory experiments have been carried out in various kinds of kinds of furnaces to try to simulate the formation of chondrules textures in a single heating/cooling cycle. These furnace experiments have been used to infer the cooling rates of chondrules during the temperature range at which olivine crystallized from the melt. Most of these inferred values are in the range 0.01-1 K per second. These low cooling rates are problematical because there is no long-term nebular environment that yields such values. In transparent regions chondrules would cool at rates orders of magnitude higher, whereas in an opaque nebular disk the cooling rates would be many orders of magnitude lower. And these latter conditions are not suitable locations for chondrule formation because such high temperatures would cause the complete evaporation of chondrules (which have melting temperatures about 600 K higher than their evaporation temperatures). During the last several years several kinds of petrographic evidence indicating rapid chondrule cooling have been recognized. These include thin overgrowths on relict grains, clusters of small crystals that grew following the most recent melting event, and fragments preserving shardlike shapes that would have been hidden had several tens of micrometers of new growth occurred following the last melting event. And there are other indications of rapid cooling including the preservation of volatiles such as FeS and one case where the modeling of O-isotopic and FeO/(FeO+MgO) gradients indicated a high cooling rate.

Wasson, J. T.↗

Bulk, rare earth and other trace elements in Apollo 14 and 15 and Luna 16 samples

The chemical abundances were measured by instrumental and radiochemical neutron activation analysis in a variety of lunar specimens. Apollo 14 soils are characterized by significant enrichments of Al2O3, Na2O and K2O and depletions of TiO2, FeO, MnO and Cr2O3 relative to Apollo 11 and to most of Apollo 12 soils. The uniform abundances in 14230 core tube soils and three other Apollo 14 soils indicate that the regolith is uniform to at least 22 cm depth and within approximately 200 m from the lunar module. Two Luna 16 breccias are similar in composition to Luna 16 soils. Four Apollo 15 soils (LM, STA 4, 9, and 9a) have variable compositions. Interelement correlations between MnO-FeO, Sc-FeO, V-Cr2O3 and K2O-Hf negate the hypothesis that howardite achondrites may be primitive lunar matter, argue against the fission hypothesis for the origin of the moon, and precludes any selective large scale volatilization of alkalies during lunar magmatic events.

Laul, J. C.↗

Compositional data for twenty-one Fra Mauro lunar materials.

Major, minor, and trace element analyses are presented for two igneous rocks, six breccias, four microbreccias, two breccia clasts, and six soils, as well as a sample of sawdust from rock 14066. Evaluation of the data suggests that the samples from the Fra Mauro highlands have the same nonterrestrial characteristics shown previously by the samples returned from the mare regions by Apollo 11 and 12 - namely, a high refractory element content, a lower volatile element content, and an excess reducing capacity above that due to FeO. The Fra Mauro soils have higher concentrations of Al2O3, Na2O, and K2O and lower amounts of FeO and TiO2 than do the mare soils. They also show a bimodal distribution of Ni, B, and Nb. The highland breccias are richer in SiO2, Al2O3, MgO, Na2O, and K2O than those returned from the mare lowlands. FeO, TiO2, and MnO are lower in concentration at Fra Mauro, and the highland breccias are more complex mineralogically than those collected previously.

Rose, H. J., Jr.↗

Major and trace elements in igneous rocks from Apollo 15.

The concentrations of major and trace elements have been determined in igneous rocks from Apollo 15. All materials analyzed have typical depletions of Eu except for minerals separated from sample 15085. Four samples have concentrations of trace elements that are similar to those of KREEP. The samples of mare basalt from Apollo 15 have higher concentrations of FeO, MgO, Mn, and Cr and lower concentrations of CaO, Na2O, K2O, and rare-earth elements (REE) as compared to the samples of mare basalt from Apollos 11, 12, and 14. The samples can be divided into two groups on the basis of their normative compositions. One group is quartz normative and has low concentrations of FeO while the other is olivine normative and has high concentrations of FeO. The trace element data indicate that the samples of olivine normative basalt could be from different portions of a single lava flow.

Helmke, P. A.↗

Soils from Mare Crisium - Agglutinitic glass chemistry and soil development

Agglutinates were studied in 29 polished thin sections of grain mounts from various size fractions of six Luna 24 soil horizons. Three populations of agglutinitic glass compositions were found: a high-MgO, high-FeO group identified as a coarse-grained basaltic component; a low-MgO, low-FeO group from a highland source; and a low-MgO, high-FeO group probably from the subophitic basalt component. The presence of a significant amount of admixed highland component probably accounts for an enrichment in plagioclase and a depletion in ferromagnesian elements displayed by the agglutinitic glass compositions relative to the bulk soil.

Hu, H.-N.↗