Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FY21”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

44 records · Page 3

Characterization of Lunar Polar Volatiles for Curation and ISRU - Executive Summary

The goal of this project is to support lunar exploration by simulating and characterizing ice and volatile-rich materials expected to be found at the lunar poles. These materials are highly sensitive to heating, which could significantly alter their composition and prevent scientific studies on lunar samples. During FY19, we obtained materials for and designed a simulated lunar environment, within which volatile-rich simulant could be made. We also refined the procedure for moderate-fidelity lunar simulants at cryogenic temperatures. In FY20, we completed our test setup, and we can now reach cryogenic temperatures and near-lunar pressures with active compositional monitoring of volatiles in the vapor phase. For FY21, we: 1) progressed towards developing sample storage temperature requirements for volatile-rich samples by completing storage testing, along with materials testing for Artemis geologic sampling, 2) obtained instrumentation for solid sample monitoring to characterize solid species, and 3) progressed towards water extraction testing for ISRU. Our test results will directly feed into Artemis science requirements, hardware designs for sample return, vehicle requirements (HLS, Gateway, Orion), and operations planning for lunar exploration activities.

Julie L Mitchell↗

Lunar Auger Dryer ISRU (LADI) Mechanical Testing and Supporting Models

In 2009, the Lunar Reconnaissance Orbiter (LRO) and Lunar Crater Observation and Sensing Satellite (LCROSS) provided definitive proof of water in the Lunar’s southern permanently shadowed region (PSR). Both the 2020 NASA Technology Taxonomy and the Lunar Surface Innovation Initiative (LSII) team identified capability gaps in icy regolith transfer and reactor processing in Permanently Shad-owed Region (PSR) environmental conditions. A water processing plant operating from inside the PSR can continuously process water (and volatiles) for both breathable air and propellant. NASA’s Johnson Space Center (JSC) began development of the primary sub-system for a Mars plant in 2017 and fabricated a unique breadboard test stand for validating the feasibility of this concept. This testing was postponed with the redirection of NASA’s mission from Mars to Moon. A JSC led trade study in FY20 formulated a plan to leverage existing hardware to test concept feasibility, developed a lunar auger dryer sizing tool, and identified that both physical flow and thermal models are required to develop an Engineering Development Unit (EDU) for environmental testing. Beginning in FY21, the Game Changing Development Program (GCDP) funded a three-year technology development project to increase the Technology Readiness Level (TRL) of the Lunar Auger Dryer ISRU (LADI) subsystem to TRL 5.

Lunar↗

Development of an Ultra High-Pressure Metals Promoted Combustion in Oxygen Test Apparatus

Materials flammability data is needed at pressures higher than ever tested before (greater than 10,000 psi). WSTF has designed and is currently building a metals flammability apparatus that can test metals up to 30,000 psi. Solid progress was achieved on the chamber in terms of system build up and fulfilling requirements to perform a NASA Test Readiness Review. Understanding metals flammability data at extreme pressure opens the doors for higher pressure and higher performance oxygen systems. Proposed systems include more reliable/higher performance propulsion systems and more reliable/lighter Environmental Control Life Support Systems (ECLSS). The test system needed for this testing required significant research and development to select a pressurization method and eliminate contact with potentially flammable materials back to the chamber. No additional promoted combustion data was collected in FY21. This International Research & Development (IRAD) proposal was critical to getting the system very close to operational status. This capability is critical to collect forward leaning material flammability data for future spacecraft and ground systems. Forward work has been identified and funding is being sought outside of the Center Innovation Fund (CIF) process for late FY23/FY24.

promoted combustion↗

Near-Earth Object Surveyor Overview

The Near-Earth Object (NEO) Surveyor is designed to detect, categorize and characterize Near-Earth Objects (NEOs) using infrared imaging. The project was approved to enter the preliminary design phase (Phase B) in FY21 after an extended Concept Development Phase (Phase A). The NEO Surveyor project responds to US Public Law 109-155[1], National Research Council’s report “Defending Planet Earth: Near-Earth Object Surveys & Hazard Mitigation Strategies (2010)”[2], the U. S. National Near-Earth Object Preparedness Strategy and Action Plan (June 2018)[3], and the objectives of NASA’s Planetary Defense Coordination Office (PDCO). The goals of the NEO Surveyor project are to: (1) identify impact hazards to the Earth posed by NEOs (defined as asteroids and comets that come within 1.3 AU of the Sun) by performing a comprehensive survey of the NEO population; (2) obtain detailed physical characterization data for individual objects that are likely to pose an impact hazard; (3) characterize the entire population of potentially hazardous NEOs to inform potential mitigation strategies. The mission will make significant progress toward the George E. Brown, Jr. NEO Survey Program objective defined by the U. S. Congress of detecting, tracking, cataloging, and characterizing at least 90% of NEOs equal to or larger than 140 m in diameter. The project is a collaboration between NASA-JPL, the University of Arizona (UA) and industry, with Ball Aerospace notably providing the spacecraft and key instrument elements. This paper will describe the overall NEO Surveyor Project objectives, initial spacecraft and instrument design and development plans and mission concept.

Veto, Michael↗

Fundamental Regolith Properties, Handling and Water Capture (FLEET) Project Update

The FLEET project, begun in FY21, was designed to research several concepts for components and subsystems needed for extracting water from planetary ice deposits. This is one of two approaches for providing water off-Earth for direct use and also for feedstock to manufacture spacecraft propellants. The other approach is to extract lattice-bound water and hydroxyl from the minerals that make up the solid grains of rock and regolith. The ultimate intent is to integrate the findings with other efforts, such as, in the creation of complete water-from-ice production systems for various down-stream uses. The project consists of several elements, now in various stages of completion. They are presented here in the approximate order they would generally be applied to a water-extraction system: Digging icy regolith, transporting it, capturing water vapor, and sealing chambers from the outer environment.

L Gertsch↗

Fundamental Regolith Properties, Handling and Water Capture (FLEET) Update

The FLEET project, begun in FY21, was designed to research several concepts for components and subsystems needed for extracting water from planetary ice deposits. This is one of two approaches for providing water off-Earth for direct use and also for feedstock to manufacture spacecraft propellants. The other approach is to extract lattice-bound water and hydroxyl from the minerals that make up the solid grains of rock and regolith. The ultimate intent is to integrate the findings with other efforts, such as, in the creation of complete water-from-ice production systems for various down-stream uses. The project consists of several elements, now in various stages of completion. They are presented here in the approximate order they would generally be applied to a water-extraction system: Digging icy regolith, transporting it, capturing water vapor, and sealing chambers from the outer environment.

regolith excavation↗

Evaluating the Viability of Compact and Portable X-Ray Systems for an Exploration Medical System in a Ground Demonstration

MOTIVATION FOR INCLUDING X-RAY CAPABILITIES For upcoming exploration missions, the need for enhanced medical care becomes critical due to extended mission durations, significant communication delays, and minimal evacuation opportunities. Previous evidence by our team has revealed that among the 119 medical conditions targeted for management during spaceflight within NASA Exploration Medical Capability’s IMPACT Condition List, at least 36 could benefit from radiography (XR). Utilizing XR for diagnosis and management is hypothesized to significantly improve management of crew health by enabling the immediate evaluation and confirmation of potential injuries or illnesses. Beyond clinical applications, XR also holds potential for non-destructive testing (NDT). This includes applications such as assessing the structural integrity of the spacecraft, analyzing surface and meteorite samples, and inspecting onboard electronics. THREE CANDIDATE X-RAY SYSTEMS CHOSEN FOR GROUND DEMONSTRATION The Exploration Medical Capability Element (ExMC) and the Exploration Medical Integrated Product Team (XMIPT) of the Mars Campaign Office initiated early background work for ground demonstrations. In FY21, ExMC published a Concept of Operations to guide requirements development. By FY23, XMIPT and yet2, a technology scouting and open innovation consulting firm, had completed a market survey and trade study to identify potential miniature XR systems. Selection criteria included commercial-off-the-shelf availability, low mass and volume, and regulatory compliance. The top three candidate devices—Remedi REMEX-KA6, MinXray Impact, and FujiFilm Xair—were acquired to characterize the requirements and capabilities of each device. To facilitate testing, phantoms, and radiographic personal protective equipment (PPE) were purchased, and a dedicated space was designated for XRS usage at Glenn Research Center. During this presentation, the mass, volume, and power requirements for each of the three piloted devices are revealed, as well as information regarding the detector, mA, and kV of the devices. GOAL AND OBJECTIVES OF A MINI XRS GROUND DEMONSTRATION The primary goal of ExMC/XMIPT technology demonstrations is to bridge the gap in available, flight-ready medical device technology by flight-testing diagnostic and treatment technologies essential for managing medical conditions during exploration missions. These technologies must adhere to vehicle constraints such as mass, volume, power, and data requirements, integrate seamlessly with medical decision-support tools, and support increasingly Earth-independent operations. There are three main objectives for the future ground demonstration of these three devices. First, we aim to determine the full capabilities of these three miniature XR systems within the context of the spaceflight environment. While medical applications are the primary focus for the miniature XR, a comprehensive exploration of non-medical uses has been initiated by an XMIPT-sponsored NASA SPARK campaign to identify collaborators. Second, we plan to establish criteria and to use insights gained from evaluating each miniature XR against those criteria to select the most suitable system among the three candidates. Third, we intend to evaluate their suitability for flight certification, which includes assessing its durability for launch, reentry, and exposure to high background radiation, as well as its compatibility with existing data architecture systems. Numerous subject matter experts from NASA and partner institutions will support these objectives.

C A Haddix↗