Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FORCE FIELD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Accurate Quartic Force Fields and Vibrational Frequencies for HCN and HNC

The quartic force fields of HCN and HNC are determined using atomic natural orbital one-particle basis sets of spdf/spd and spdfg/spdf quality in conjunction with the CCSD(T) electron correlation method (singles and doubles coupled-cluster theory plus a perturbational estimate of the effects of connected triple excitations). The HCN force field is in good agreement with a recent experimentally derived force field and also with the force field recently computed by Wong and Bacskay. On the basis of the good agreement obtained for HCN, it is argued that the ab initio quartic force field for HNC is superior to a prior force field derived from experiment. The harmonic frequencies of HNC are predicted to be 3822 +/- 10,472 +/- 5, and 2051 +/-10/cm for omega1, omega2, and omega3, respectively; the experimentally derived values are above these values and fall outside the estimated uncertainties. Using the quartic force field, spectroscopic constants are predicted for HNC based on a vibrational second-order perturbation theory analysis. It is also asserted that the gas-phase fundamental v(sub 3) for HNC is slightly lower than the matrix isolation value. The range of validity of the quartic force fields is investigated by comparison of variational vibrational energies computed with the quartic force fields to those obtained from our recently reported global HCN/HNC potential energy surface and also to experimental data.

Lee, Timothy J.↗

Accurate Quartic Force Fields and Vibrational Frequencies for HCN and HNC

The quartic force fields of HCN and HNC are determined using atomic natural orbital one-particle basis sets of spdf/spd and spdfg/spdf quality in conjunction with the CCSD(T) electron correlation method (singles and doubles coupled-cluster theory plus a perturbation estimate of the effects of connected triple excitations). The HCN force field is in good agreement with a recent experimentally derived force field and also with the force field recently computed by Wong and Bacskay. On the basis of the good agreement obtained for HCN, it is argued that the ab initio quartic force field for HNC is superior to a prior force field derived from experiment. The harmonic frequencies of HNC are predicted to be 3822 +/- 10, 472 +/- 5, and 2051 +/- 10 cm(exp -1) for omega(sub 1), omega(sub 2), and omega(sub 3), respectively; the experimentally derived values are above these values and fall outside the estimated uncertainties. Using the quartic force field, spectroscopic constants are predicted for HNC based on a vibrational second-order perturbation theory analysis. It is also asserted that the gas-phase fundamental nu(sub 3) for HNC is slightly lower than the matrix isolation value. The range of validity of the quartic force fields is investigated by comparison of variational vibrational energies computed with the quartic force fields to those obtained from our recently reported global HCN/HNC potential energy surface and also to experimental data.

Lee, Timothy J.↗

Approximate photochemical dynamics of azobenzene with reactive force fields

We have fitted reactive force fields of the ReaxFF type to the ground and first excited electronic states of azobenzene, using global parameter optimization by genetic algorithms. Upon coupling with a simple energy-gap transition probability model, this setup allows for completely force-field-based simulations of photochemical cis→trans- and trans→cis-isomerizations of azobenzene, with qualitatively acceptable quantum yields. This paves the way towards large-scale dynamics simulations of molecular machines, including bond breaking and formation (via the reactive force field) as well as photochemical engines (presented in this work)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A molecular mechanics force field for lignin

A CHARMM molecular mechanics force field for lignin is derived. Parameterization is based on reproducing quantum mechanical data of model compounds. Partial atomic charges are derived using the RESP electrostatic potential fitting method supplemented by the examination of methoxybenzene:water interactions. Dihedral parameters are optimized by fitting to critical rotational potentials and bonded parameters are obtained by optimizing vibrational frequencies and normal modes. Finally, the force field is validated by performing a molecular dynamics simulation of a crystal of a lignin fragment molecule and comparing simulation-derived structural features with experimental results. Together with the existing force field for polysaccharides, this lignin force field will enable full simulations of lignocellulose.

09 BIOMASS FUELS↗

Design principles for high–pressure force fields: Aqueous TMAO solutions from ambient to kilobar pressures

Accurate force fields are one of the major pillars on which successful molecular dynamics simulations of complex biomolecular processes rest. They have been optimized for ambient conditions, whereas high-pressure simulations become increasingly important in pressure perturbation studies, using pressure as an independent thermodynamic variable. Here, we explore the design of non-polarizable force fields tailored to work well in the realm of kilobar pressures – while avoiding complete reparameterization. Our key is to first compute the pressure-induced electronic and structural response of a solute by combining an integral equation approach to include pressure effects on solvent structure with a quantum-chemical treatment of the solute within the embedded cluster reference interaction site model (EC-RISM) framework. Next, the solute’s response to compression is taken into account by introducing pressure-dependence into selected parameters of a well-established force field. In our proof-of-principle study, the full machinery is applied to N,N,N-trimethylamine-N-oxide (TMAO) in water being a potent osmolyte that counteracts pressure denaturation. EC-RISM theory is shown to describe well the charge redistribution upon compression of TMAO(aq) to 10 kbar, which is then embodied in force field molecular dynamics by pressure-dependent partial charges. The performance of the high pressure force field is assessed by comparing to experimental and ab initio molecular dynamics data. Beyond its broad usefulness for designing non-polarizable force fields for extreme thermodynamic conditions, a good description of the pressure-response of solutions is highly recommended when constructing and validating polarizable force fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A molecular dynamics study of water-soluble polymers: analysis of force fields from atomistic simulations

A force field (FF) analysis was performed on three water-soluble polymers (PAM, PNIPAAm, and PEO), that are of significant interest for biomedical applications, by measuring the polymer radius of gyration ( R g ), solvent accessible surface area (SASA), radial distribution functions ( g ( r )), and relative shape anisotropy ( κ 2 ) in dilute conditions. Three generalized FFs were utilized to model PAM and PNIPAAm (DREIDING, GAFF, and GAFF2) in conjunction with five water models: SPC, SPC/E, TIP3P, TIP4P, and TIP4P/2005. It was found that the DREIDING FF showed better agreement with PAM experimental data reported for R g , irrespective of the water model. For PNIPAAm, the DREIDING FF was also the best performing among the FFs studied; however, the choice of water model played an important role in the predicted properties. The trends in SASA and κ 2 are consistent with R g . For PEO modelled with the CHARMM C35r FF, all water models except TIP3P resulted in good agreement with experimental and previous simulation data. Furthermore these results highlight the considerable impact that polymer and water force fields can have on sampling appropriate polymer conformations in solvated systems.

36 MATERIALS SCIENCE↗

Improved Treatment of 1–4 Interactions in Force Fields for Molecular Dynamics Simulations

Traditional force fields commonly use a combination of bonded torsional terms and empirically scaled nonbonded interactions to capture 1-4 energies and forces of atoms separated by three bonds in a molecule. While this approach can yield accurate torsional energy barriers, it often leads to inaccurate forces and erroneous geometries and creates an interdependence between dihedral terms and nonbonded interactions, complicating parametrization and reducing transferability. Here, in this paper, we demonstrate that 1-4 interactions can be accurately modeled using only bonded coupling terms, eliminating the need for arbitrarily scaled nonbonded interactions altogether. Furthermore, by leveraging the automated parametrization capabilities of the Q-Force toolkit, we efficiently determine the necessary coupling terms without the need for manual adjustment. Our approach is first validated on a range of small molecule systems, encompassing both flexible and rigid structures, and shows a significant improvement in force field accuracy, obtaining subkcal/mol mean absolute error for every molecule tested. We further extend the bonded-only model for 1-4 interactions to Amber ff14sb, CHARMM36, and OPLS-AA force fields to reproduce ab initio gas and implicit solvent ϕ,ψ surfaces of alanine dipeptide.

Abdullah, Aalim S. [University of California, Berk↗

Ab Initio Flexible Force Field for Metal–Organic Frameworks Using Dummy Model Coordination Bonds

We present force fields developed from periodic density functional theory (DFT) calculations that can be used in classical molecular simulations to model M–MOF-74 (M = Co, Fe, Mg, Mn, Ni, Zn) and its extended linker analogs. Our force fields are based on cationic dummy models (CDMs). These dummy models simplify the methodology required to tune the parameters and improve the accuracy of the force fields. We used our force fields to compare mechanical properties across the M–MOF-74 series and determine that increasing the size of the linker decreases the framework rigidity. In addition, we applied our force fields to an extended linker analog of Mg–MOF-74 and characterized the free energy of a previously reported deformation pattern in which the one-dimensional hexagonal channels of the framework become irregular. The free energy profiles confirm that the deformation is adsorbate induced and impossible to access solely by a pressure stimulus. On the basis of our results, we conclude that the force fields presented here and others that may be developed using our methodology are transferable across metal–organic framework series that share a metal center topology. Lastly, we believe that these force fields have the potential to be adapted for the study of complex problems in MOF chemistry, including defects and crystal growth, that have thus far been beyond the scope of classical molecular simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of three empirical force fields for phonon calculations in CdSe quantum dots

Three empirical interatomic force fields are parametrized using structural, elastic, and phonon dispersion data for bulk CdSe and their predictions are then compared for the structures and phonons of CdSe quantum dots having average diameters of ~2.8 and ~5.2 nm (~410 and ~2630 atoms, respectively). The three force fields include one that contains only two-body interactions (Lennard-Jones plus Coulomb), a Tersoff-type force field that contains both two-body and three-body interactions but no Coulombic terms, and a Stillinger-Weber type force field that contains Coulombic interactions plus two-body and three-body terms. While all three force fields predict nearly identical peak frequencies for the strongly Raman-active “longitudinal optical” phonon in the quantum dots, the predictions for the width of the Raman peak, the peak frequency and width of the infrared absorption peak, and the degree of disorder in the structure are very different. The three force fields also give very different predictions for the variation in phonon frequency with radial position (core versus surface). The Stillinger-Weber plus Coulomb type force field gives the best overall agreement with available experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical Investigation of Hydrogen Adsorption and Dissociation on Iron and Iron Carbide Surfaces Using the ReaxFF Reactive Force Field Method

We have developed a ReaxFF reactive force field to describe hydrogen adsorption and dissociation on iron and iron carbide surfaces relevant for simulation of Fischer–Tropsch (FT) synthesis on iron catalysts. This force field enables large system (>>1000 atoms) simulations of hydrogen related reactions with iron. The ReaxFF force field parameters are trained against a substantial amount of structural and energetic data including the equations of state and heats of formation of iron and iron carbide related materials, as well as hydrogen interaction with iron surfaces and different phases of bulk iron. We have validated the accuracy and applicability of ReaxFF force field by carrying out molecular dynamics simulations of hydrogen adsorption, dissociation and recombination on iron and iron carbide surfaces. The barriers and reaction energies for molecular dissociation on these two types of surfaces have been compared and the effect of subsurface carbon on hydrogen interaction with iron surface is evaluated. We found that existence of carbon atoms at subsurface iron sites tends to increase the hydrogen dissociation energy barrier on the surface, and also makes the corresponding hydrogen dissociative state relatively more stable compared to that on bare iron. These properties of iron carbide will affect the dissociation rate of H{sub 2} and will retain more surface hydride species, thus influencing the dynamics of the FT synthesis process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A transferable force field for CdS-CdSe-PbS-PbSe solid systems

A transferable force field for the PbSe-CdSe solid system using the partially charged rigid ion model has been successfully developed and was used to study the cation exchange in PbSe-CdSe heteronanocrystals [A. O. Yalcin et al., “Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth,” Nano Lett. 14, 3661–3667 (2014)]. In this work, we extend this force field by including another two important binary semiconductors, PbS and CdS, and provide detailed information on the validation of this force field. The parameterization combines Bader charge analysis, empirical fitting, and ab initio energy surface fitting. When compared with experimental data and density functional theory calculations, it is shown that a wide range of physical properties of bulk PbS, PbSe, CdS, CdSe, and their mixed phases can be accurately reproduced using this force field. The choice of functional forms and parameterization strategy is demonstrated to be rational and effective. This transferable force field can be used in various studies on II-VI and IV-VI semiconductor materials consisting of CdS, CdSe, PbS, and PbSe. Here, we demonstrate the applicability of the force field model by molecular dynamics simulations whereby transformations are initiated by cation exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and dynamic properties of liquid tin from a new modified embedded-atom method force field

We developed a new modified embedded-atom method (MEAM) force field for liquid tin. Starting from the Ravelo and Baskes force field [Phys. Rev. Lett. 79, 2482 (1997)], the parameters are adjusted using a simulated annealing optimization procedure in order to obtain better agreement with liquid-phase data. The predictive capabilities of the new model and the Ravelo and Baskes force field are evaluated using molecular dynamics by comparing to a wide range of first-principles and experimental data. The quantities studied include crystal properties (cohesive energy, bulk modulus, equilibrium density, and lattice constant of various crystal structures), melting temperature, liquid structure, liquid density, self-diffusivity, viscosity, and vapor-liquid surface tension. We show that although the Ravelo and Baskes force field generally gives better agreement with the properties related to the solid phases of tin, the new MEAM force field gives better agreement with liquid tin properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydration and reaction mechanisms on sodium silicate glass surfaces from molecular dynamics simulations with reactive force fields

Recent development of reactive force fields have enabled molecular dynamics simulations of interactions between silicate glasses and water at the atomistic scale. While multicomponent silicate glasses encompass a wide variety of compositions and properties, one common structural feature in these glasses is the combination of the network structure that is made up of silica tetrahedra linked through corner sharing interspersed with network modifiers like alkali and alkaline-earth ions that break up the Si–O–Si linkages by forming nonbridging oxygen. In reactions with water, ion exchange between alkali ions in the glass and proton or hydronium in the solution, as well as hydrolysis reaction of the Si–O–Si linkages and subsequent silanol formation, is observed and well documented. Furthermore, we have used a set of recently developed reactive force field to investigate the reactions between water and the surfaces of silica and sodium silicate glasses of different compositions for reactions up to 8 nanoseconds. Our results indicate sodium leaching into water and diffusion of water molecules up to 25 Å into the glass surface. We examined the structural and compositional changes inside the glass and around the diffused ions and use these to explain the rates of silanol formation at the surface. We also observed proton transport in the glass which has an indirect influence on the silanol formation rates. While the surface of the glass was rough to start with, it undergoes further modification into a hydrated gel-like structure in the glass for up to 5 Å in the higher alkali containing glasses. It was found that the leached sodium ions remain close to the interface and that fragments of silicate network from the surface is capable of dislodging from the bulk glass and enter the aqueous solution. These simulations thus provide insights into the formation and structure of an alteration layers commonly observed in multicomponent silicate glasses corroded in aqueous solutions.

36 MATERIALS SCIENCE↗

ddcMD: A fully GPU-accelerated molecular dynamics program for the Martini force field

We have implemented the Martini force field within Lawrence Livermore National Laboratory’s molecular dynamics program, ddcMD. The program is extended to a heterogeneous programming model so that it can exploit graphics processing unit (GPU) accelerators. In addition to the Martini force field being ported to the GPU, the entire integration step, including thermostat, barostat, and constraint solver, is ported as well, which speeds up the simulations to 278-fold using one GPU vs one central processing unit (CPU) core. A benchmark study is performed with several test cases, comparing ddcMD and GROMACS Martini simulations. The average performance of ddcMD for a protein–lipid simulation system of 136k particles achieves 1.04 µs/day on one NVIDIA V100 GPU and aggregates 6.19 µs/day on one Summit node with six GPUs. The GPU implementation in ddcMD offloads all computations to the GPU and only requires one CPU core per simulation to manage the inputs and outputs, freeing up remaining CPU resources on the compute node for alternative tasks often required in complex simulation campaigns.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Perfluoropolyethers: Development of an All-Atom Force Field for Molecular Simulations and Validation with New Experimental Vapor Pressures and Liquid Densities

A force field for perfluoropolyethers (PFPEs) based on the general optimized potentials for liquid simulations all-atom (OPLS-AA) force field has been derived in conjunction with experiments and ab initio quantum mechanical calculations. Vapor pressures and densities of two liquid PFPEs, perfluorodiglyme (CF 3 –O–(CF 2 –CF 2 –O)2–CF 3 ) and perfluorotriglyme (CF 3 –O–(CF 2 –CF 2 –O) 3 –CF 3 ), have been measured experimentally to validate the force field and increase our understanding of the physical properties of PFPEs. Force field parameters build upon those for related molecules (e.g., ethers and perfluoroalkanes) in the OPLS-AA force field, with new parameters introduced for interactions specific to PFPEs. Molecular dynamics simulations using the new force field demonstrate excellent agreement with ab initio calculations at the RHF/6-31G* level for gas-phase torsional energies (<0.5 kcal mol –1 error) and molecular structures for several PFPEs, and also accurately reproduce experimentally determined densities (<0.02 g cm –3 error) and enthalpies of vaporization derived from experimental vapor pressures (<0.3 kcal mol–1). Additional comparisons between experiment and simulation show that polyethers demonstrate a significant decrease in enthalpy of vaporization upon fluorination unlike related molecules (e.g., alkanes and alcohols). Simulation suggests this phenomenon is a result of reduced cohesion in liquid PFPEs due to a reduction in localized associations between backbone oxygen atoms and neighboring molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of classical nonpolarizable force fields for OH{sup −} and H{sub 3}O{sup +}

We optimize force fields for H{sub 3}O{sup +} and OH{sup −} that reproduce the experimental solvation free energies and the activities of H{sub 3}O{sup +} Cl{sup −} and Na{sup +} OH{sup −} solutions up to concentrations of 1.5 mol/l. The force fields are optimized with respect to the partial charge on the hydrogen atoms and the Lennard-Jones parameters of the oxygen atoms. Remarkably, the partial charge on the hydrogen atom of the optimized H{sub 3}O{sup +} force field is 0.8 ± 0.1|e|—significantly higher than the value typically used for nonpolarizable water models and H{sub 3}O{sup +} force fields. In contrast, the optimal partial charge on the hydrogen atom of OH{sup −} turns out to be zero. Standard combination rules can be used for H{sub 3}O{sup +} Cl{sup −} solutions, while for Na{sup +} OH{sup −} solutions, we need to significantly increase the effective anion-cation Lennard-Jones radius. While highlighting the importance of intramolecular electrostatics, our results show that it is possible to generate thermodynamically consistent force fields without using atomic polarizability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Frequency-dependent local field factors in dielectric liquids by a polarizable force field and molecular dynamics simulations

A force field model for calculating local field factors, i.e. the linear response of the local electric field for example at a nucleus in a molecule with respect to an applied electric field, is discussed. It is based on a combined charge-transfer and point-dipole interaction model for the polarizability, and thereby it includes two physically distinct terms for describing electronic polarization: changes in atomic charges arising from transfer of charge between the atoms and atomic induced dipole moments. A time dependence is included both for the atomic charges and the atomic dipole moments and if they are assumed to oscillate with the same frequency as the applied electric field, a model for frequency-dependent properties are obtained. Furthermore, if a life-time of excited states are included, a model for the complex frequency-dependent polariability is obtained including also information about excited states and the absorption spectrum. We thus present a model for the frequency-dependent local field factors through the first molecular excitation energy. It is combined with molecular dynamics simulations of liquids where a large set of configurations are sampled and for which local field factors are calculated. We are normally not interested in the average of the local field factor but rather in configurations where it is as high as possible. In electrical insulation, we would like to avoid high local field factors to reduce the risk for electrical breakdown, whereas for example in surface-enhanced Raman spectroscopy, high local field factors are desired to give dramatically increased intensities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗