SEARCH · Engineering Papers

Results for “FILL FACTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1999

Corona Structure and Heating Constraints Determined from SERTS Observations

Intensities of the Extreme-ultraviolet (EUV) spectral lines were measured as a function of radius off the solar limb by two flights of the Goddard's Solar Extreme-ultraviolet Rocket Telescope and Spectrograph (SERTS) for three quiet sun regions. Density scale heights were determined for the different spectral lines. Limits on the filling factor were determined. In the one case where an upper limit was determined it was much less than unity. Coronal heating above 1.15 solar radii is required for all three regions studied. For reasonable filling factors, local heating is needed.

Falconer, D. A.↗

NASA NTRS2001

Huge Coronal Structure and Heating Constraints Determined from Serts Observations

Intensities of the extreme-ultraviolet (EUV) spectral lines were measured as a function of radius off the solar limb by two flights of the Goddard's Solar Extreme-Ultraviolet Rocket Telescope and Spectrograph (SERTS) for three quiet-Sun regions. Density scale heights were determined for the different spectral lines. Limits on the filling factor were determined. In the one case where an upper limit was determined it was much less than unity. coronal heating above 1.15 solar radii is required for all three regions studied. For reasonable filling factors, local heating is needed.

Falconer, D. A.↗

NASA NTRS1986

Design and development of conical X-ray imaging mirrors

The basic principles for the design of conical optics, and the development of an arc-minute quality conical mirror are described. Computer ray tracing data for over 100 conical mirror designs are analyzed in order to study the intrinsic capabilities of conical mirrors; the intrinsic spatial resolution and approximate filling factor are considered. The procedures for the fabrication of a conical mirror for the Broad-Band X-ray Telescope experiment to be flown on the Shuttle are examined. A f/10 conical mirror with 3.8 m focal length and a filling factor of about 60 percent, consisting of 18 nested reflector pairs has been developed. The difference between the intrinsic and measured half-power radii is investigated. Methods for improving the spatial resolution of conical mirrors are being researched. The advantages and disadvantages of conical mirrors are discussed. It is noted that conical mirrors are applicable for studies in which a broad bandpass, moderate spatial resolution, and a small number of mirrors are required.

Petre, R.↗

NASA NTRS1990

Lower solar chromosphere-corona transition region. III - Implications of the observed quiet-sun emission measure including wave pressure effects

The observed form of the emission measure (EM) is used as a function of temperature to infer the wave energy flux density and pressure throughout the lower transition region (TR). This procedure eliminates the need for specifying how the wave energy flux density is damped and addresses the question of whether there is any form of the mechanical heating associated with the degradation of an upward traveling wave energy flux density which is consistent with the observed EM and other observational constraints for the quiet sun. It is found that the observed form of the EM curve is incompatible with waves traveling vertically at the sound speed, regardless of any filling factor arguments. The same conclusion also applies to waves traveling at the Alfven speed, unless it is assumed that the emission in lower TR lines originates solely from small, spatially unresolved regions of large magnetic field strength (100 G), which cover a small fraction (filling factors of 1 percent) of the solar surface.

Woods, D. Tod↗

NASA NTRS1972

Design of toroidal transformers for maximum efficiency

The design of the most efficient toroidal transformer that can be built given the frequency, volt-ampere rating, magnetic flux density, window fill factor, and materials is described. With the above all held constant and only the dimensions of the magnetic core varied, the most efficient design occurs when the copper losses equal 60 percent of the iron losses. When this criterion is followed, efficiency is only slightly dependent on design frequency and fill factor. The ratios of inside diameter to outside diameter and height to build of the magnetic core that result in transformers of maximum efficiency are computed.

Dayton, J. A., Jr.↗

NASA NTRS1989

Superclustering in the explosion scenario

A simple toy model is used to study the spatial distribution of rich clusters in a generic type of explosion scenario. The model, parameterized by the distribution of shell radii and the filling factor, places spherical shells at random and identifies each 'knot' as a cluster. The resulting cluster correlation function is close to a power law extending to the diameter of the largest spheres. Richer clusters form at the intersections of bigger shells and so have stronger correlations. Typical shell radii and filling factors are required to produce the observed number density of clusters. Models with a power-law radius distribution also reproduce the richness distribution of clusters in the Abell catalog. Supercluster multiplicity functions, void probabilities, number counts, topology statistics, and velocity correlations confirm the presence of strong superclustering and quantify the non-Gaussian nature of the model.

Weinberg, David H.↗

NASA NTRS1985

The photospheric magnetic field of the dM3.5e flare star AD Leonis

A high-resolution infrared spectrum of the dM3.5e flare star AD Leo, obtained with the Kitt Peak 4 m Fourier Transform Spectrometer, clearly shows the presence of strong magnetic fields. Five absorption lines in the 4400-4600 per cm region have been modeled, and it is inferred that 73 percent + or - 6 percent of the surface of AD Leo is covered by active regions outside of dark spots containing a mean field strength of 3800 + or - 260 G. If these active regions are brighter than the quiet photosphere, the surface filling factor will be somewhat smaller. Since simultaneous H-alpha observations exhibited no evidence of flares, the observations probably represent the quiescent magnetic flux level. The inferred field strength is consistent with equipartition of magnetic and thermal pressures in the photosphere and is similar to values derived using the scaling laws of Golub. The large observed filling factor is consistent with efficient dynamo generation of magnetic flux in this rapidly rotating star.

Saar, S. H.↗

NASA NTRS2019

A Comprehensive Chandra Study of the Disk Wind in the Black Hole Candidate 4U 1630-472

The mechanisms that drive disk winds are a window into the physical processes that underlie the disk. Stellar-mass black holes are an ideal setting in which to explore these mechanisms, in part because their outbursts span a broad range in mass accretion rate. We performed a spectral analysis of the disk wind found in six Chandra/HETG observations of the black hole candidate 4U 1630−472, covering a range of luminosities over two distinct spectral states. We modeled both wind absorption and extended wind re-emission components using PION, a selfconsistent photoionized absorption model. In all but one case, two photoionization zones were required in order to obtain acceptable fits. Two independent constraints on launching radii, obtained via the ionization parameter formalism and the dynamical broadening of the re-emission, helped characterize the geometry of the wind. The innermost wind components (r ≃ 10(sup 2-3)GM/c(exp 2)) tend toward small volume filling factors, high ionization, densities up to n ≃ 10(sup 15-16) cm(exp -3), and outflow velocities of ∼0.003c. These small launching radii and large densities require magnetic driving, as they are inconsistent with numerical and analytical treatments of thermally driven winds. Outer wind components (r ≃ 10(exp 5)GM/c(exp 2)) are significantly less ionized and have filling factors near unity. Their larger launching radii, lower densities (n ≃ 10(exp 12) cm(exp -3)), and outflow velocities (∼0.0007c) are nominally consistent with thermally driven winds. The overall wind structure suggests that these components may also be part of a broader MHD outflow and perhaps better described as magneto-thermal hybrid winds.

Black hole physics↗

NASA NTRS1992

A true-field magnetogram in a solar plage region

The Near-Infrared Magnetograph is used to make the first 2D image of true magnetic field strength in the solar photosphere. The magnitude of the magnetic field vector is derived with a typical formal precision of + or - 75 G (2 sigma) from circularly polarized spectra of a highly Zeeman-sensitive iron line at 6388.6/cm. The true-field map demonstrates that the properties of 'kilogauss' flux tubes vary coherently on a variety of spatial scales within the 1-arcmin field of view. The measured fields span the range 1000-1700 G. The amplitude of the polarized signal implies that the spatial filling factor of the flux tubes can approach 0.3 at the seeing-limited resolution of 2 arcsec. Magnetic field strength and magnetic flux are statistically related in the sense that weak-field areas are weak-flux areas, but strong fields are present in both strong-flux and weak-flux areas. This implies a degree of independence in the relationship between the filling factor of flux tubes and their individual properties, such as field strength, pressure, and temperature.

Rabin, Douglas↗

NASA NTRS1983

The magnetic field on the RS Canum Venaticorum star Lambda Andromedae

A program to detect and measure magnetic flux on the surfaces of late-type stars is discussed. A technique is adopted to deconvolve magnetically insensitive lines from similar, magnetically sensitive lines to infer the degree of Zeeman splitting in the latter lines. These measurements yield values for the magnetic field strength and filling factor (flux). To illustrate the approach, observations of the RS CVn star Lambda And are presented. At the epoch of observation, 1981 April 26, a field strength of 1290 + or - 320 gauss covering 48 + or - 7 percent of this star's surface is found. This measurement compares with an estimate of coronal magnetic flux in the cooler component of the stellar corona of 1110 gauss with a coronal volume filling factor of 75 percent, based on X-ray data for Lambda And.

Golub, L.↗

NASA NTRS2018

Development of a Robust, Efficient Process to Produce Scalable, Superconducting Kilopixel Far-IR Detector Arrays

The far-IR band is uniquely suited to study the physical conditions in the interstellar medium from nearby sources out to the highest redshifts. FIR imaging and spectroscopy instrumentation using incoherent superconducting bolometers represents a high sensitivity technology for many future suborbital and space missions, including the Origins Space Telescope. Robust, high sensitivity detector arrays with several 104 pixels, large focal plane filling factors, and low cosmic ray cross sections that operate over the entire far-IR regime are required for such missions. These arrays could consist of smaller sub-arrays, in case they are tileable. The TES based Backshort Under Grid array architecture which our group has fielded in a number of FIR cameras, is a good candidate to meet these requirements: BUGs are tileable, and with the integration of the SQUID multiplexer scaleable beyond wafer sizes; they provide high filling factors, low cosmic cross section and have been demonstrated successfully in far-infrared astronomical instrumentation. However, the production of BUGs with integrated readout multiplexers has many time and resource consuming process steps. In order to meet the requirement of robustness and efficiency on the production of future arrays, we have developed a new method to provide the superconducting connection of BUG detectors to the readout multiplexers or general readout boards behind the detectors. This approach should allow us to reach the goal to produce reliable, very large detector arrays for future FIR missions.

Staguhn, Johannes↗

NASA NTRS1994

The role of radiative acceleration in outflows from broad absorption line QSOs. 1: Comparison with O star winds

We investigate the role of radiation pressure in accelerating the broad absorption line (BAL) outflows in QSOs by comparing their properties with those of radiatively driven O star winds. We find that, owing to their lower column densities and higher velocity spreads, BAL outflows have only a few tens of strong resonance lines that are dynamically important, as compared with 10(exp 3) - 10(exp 4) lines in O star winds. We show that the combined radiative force (the 'force multiplier') declines more rapidly as a function of column density for BAL outflows than for O star winds. This is mainly attributed to the absence of lines from excited states in the BAL region. The absorbing gas in BAL outflows must have a small filling factor in order for radiative acceleration to be important dynamically. This allows the absorbing material to remain at a high enough density to maintain the ion species necessary for efficient radiative acceleration as well (as those responsible for the observed absorption), without the average flow density becoming so large that the absorbing matter cannot be accelerated by an increment larger than its own sound speed. The latter condition is necessary if the outflow is to tap a large portion of the incident photon momentum. Once a small filling factor is assumed, radiative acceleration can be more efficient in BAL outflows than in O stars. We show that terminal velocities of a few times 10(exp 4) km/sec can be expected, provided that the absorbing matter does not have to drag with it a much heavier substrate.

Arav, Nahum↗

NASA NTRS2012

Infrared and X-Ray Spectroscopy of the Kes 75 Supernova Shell Characterizing the Dust and Gas Properties

We present deep Chandra observations and Spitzer Space Telescope infrared (IR) spectroscopy of the shell in the composite supernova remnant (SNR) Kes 75 (G29.7-0.3). The remnant is composed of a central pulsar wind nebula and a bright partial shell in the south that is visible at radio, IR, and X-ray wavelengths. The X-ray emission can be modeled by either a single thermal component with a temperature of approx 1.5 keV, or with two thermal components with temperatures of 1.5 and 0.2 keY. Previous studies suggest that the hot component may originate from reverse-shocked SN ejecta. However, our new analysis shows no definitive evidence for enhanced abundances of Si, S, Ar, Mg, and Fe, as expected from supernova (SN) ejecta, or for the IR spectral signatures characteristic of confirmed SN condensed dust, thus favoring a circumstellar or interstellar origin for the X-ray and IR emission. The X-ray and IR emission in the shell are spatially correlated, suggesting that the dust particles are collisionally heated by the X-ray emitting gas. The IR spectrum of the shell is dominated by continuum emission from dust with little, or no line emission. Modeling the IR spectrum shows that the dust is heated to a temperature of approx 140 K by a relatively dense, hot plasma, that also gives rise to the hot X-ray emission component. The density inferred from the IR emission is significantly higher than the density inferred from the X-ray models, suggesting a low filling factor for this X-ray emitting gas. The total mass of the warm dust component is at least 1.3 x 10(exp -2) Solar Mass, assuming no significant dust destruction has occurred in the shell. The IR data also reveal the presence of an additional plasma component with a cooler temperature, consistent with the 0.2 keV gas component. Our IR analysis therefore provides an independent verification of the cooler component of the X-ray emission. The complementary analyses of the X-ray and IR emission provide quantitative estimates of density and filling factors of the clumpy medium swept up by the SNR.

Temim, Tea↗

NASA NTRS2009

Infrared and X-Ray Spectroscopy of the KES 75 Supernova Remnant Shell: Characterizing the Dust and Gas Properties

We present deep Chandra observations and Spitzer Space Telescope infrared (IR) spectroscopy of the shell in the composite supernova remnant (SNR) Kes 75 (G29.7-0.3). The remnant is composed of a central pulsar wind nebula and a bright partial shell in the south that is visible at radio, IR, and X-ray wavelengths. The X-ray emission can be modeled by either a single thermal component with a temperature of ~ 1.5 keV, or with two thermal components with temperatures of 1.5 and 0.2 keV. Previous studies suggest that the hot component may originate from reverse-shocked SN ejecta. However, our new analysis shows no definitive evidence for enhanced abundances of Si, S, Ar, Mg, and Fe, as expected from supernova (SN) ejecta, or for the IR spectral signatures characteristic of confirmed SN condensed dust, thus favoring a circumstellar or interstellar origin for the X-ray and IR emission. The X-ray and ill emission in the shell are spatially correlated, suggesting that the dust particles are collisionally heated by the X-ray emitting gas. The IR spectrum of the shell is dominated by continuum emission from dust with little, or no line emission. Modeling the IR spectrum shows that the dust is heated to a temperature of ~ 140 K by a relatively dense, hot plasma, that also gives rise to the hot X-ray emission component. The density inferred from the IR emission is significantly higher than the density inferred from the X-ray models, suggesting a low filling factor for this X-ray emitting gas. The total mass of the warm dust component is at least 1.3 x 10(exp -2) solar mass, assuming no significant dust destruction has occurred in the shell. The IR data also reveal the presence of an additional plasma component with a cooler temperature, consistent with the 0.2 keV gas component. Our IR analysis therefore provides an independent verification of the cooler component of the X-ray emission. The complementary analyses of the X-ray and IR emission provide quantitative estimates of density and filling factors of the clumpy medium swept up by the SNR.

Temim, Tea↗

NASA NTRS2011

Infrared and X-Ray Spectroscopy of the Kes 75 Supernova Remnant Shell: Characterizing the Dust and Gas Properties

We present deep Chandra observations and Spitzer Space Telescope infrared (IR) spectroscopy of the shell in the composite supernova remnant (SNR) Kes 75 (G29.7-0.3). The remnant is composed of a central pulsar wind nebula and a bright partial shell in the south that is visible at radio, IR, and X-ray wavelengths. The X-ray emission can be modeled by either a single thermal component with a temperature of approximately 1.5 keY, or with two thermal components with temperatures of 1.5 and 0.2 keY. Previous studies suggest that the hot component may originate from reverse-shocked supernova (SN) ejecta. However, our new analysis shows no definitive evidence for enhanced abundances of Si, S, Ar, Mg, and Fe, as expected from SN ejecta, or for the IR spectral signatures characteristic of confirmed SN condensed dust, thus favoring a circumstellar or interstellar origin for the X-ray and IR emission. The X-ray and IR emission in the shell are spatially correlated, suggesting that the dust particles are collisionally heated by the X-ray emitting gas. The IR spectrum of the shell is dominated by continuum emission from dust with little, or no line emission. Modeling the IR spectrum shows that the dust is heated to a temperature of approximately 140 K by a relatively dense, hot plasma that also gives rise to the hot X-my emission component. The density inferred from the IR emission is significantly higher than the density inferred from the X-ray models, suggesting a low filling factor for this X-my emitting gas. The total mass of the warm dust component is at least 1.3 x 10(exp -2) x solar mass, assuming no significant dust destruction has occurred in the shell. The IR data also reveal the presence of an additional plasma component with a cooler temperature, consistent with the 0.2 keV gas component. Our IR analysis therefore provides an independent verification of the cooler component of the X-ray emission. The complementary analyses of the X-ray and IR emission provide quantitative estimates of density and filling factors of the clumpy medium swept up by the SNR.

Temim, Tea↗

NASA NTRS1990

Physical conditions in photodissociation regions - Application to galactic nuclei

A procedure is outlined which determines the physical characteristics of the neutral interstellar medium in the nuclei of luminous galaxies. The method uses millimeter and IR observations to find the mass and density of the molecular and atomic gas components as well as the UV flux incident on clouds. The area and volume filling factors and approximate number of clouds and cloud radii are also found. For the Galactic center, about 100 clouds of radius about 0.4 pc and density about 100,000/cu cm are found within about 5 pc. The atomic gas temperature is about 700 K and the FUV field on clouds is about 100,000 times the local Galactic FUV field. The flux is consistent with a central source of luminosity of 2-3 x 10 to the 7th solar. Roughly 100,000 clouds of radius roughly 0.4 pc are found within the roughly 330 pc nuclear region of M82. The large number of clouds produces a projected area filling factor approaching unity. Cloud heating may be dominated by an intense interstellar UV flux.

Wolfire, Mark G.↗

NASA NTRS2011

Multiple-Event, Single-Photon Counting Imaging Sensor

The single-photon counting imaging sensor is typically an array of silicon Geiger-mode avalanche photodiodes that are monolithically integrated with CMOS (complementary metal oxide semiconductor) readout, signal processing, and addressing circuits located in each pixel and the peripheral area of the chip. The major problem is its single-event method for photon count number registration. A single-event single-photon counting imaging array only allows registration of up to one photon count in each of its pixels during a frame time, i.e., the interval between two successive pixel reset operations. Since the frame time can t be too short, this will lead to very low dynamic range and make the sensor merely useful for very low flux environments. The second problem of the prior technique is a limited fill factor resulting from consumption of chip area by the monolithically integrated CMOS readout in pixels. The resulting low photon collection efficiency will substantially ruin any benefit gained from the very sensitive single-photon counting detection. The single-photon counting imaging sensor developed in this work has a novel multiple-event architecture, which allows each of its pixels to register as more than one million (or more) photon-counting events during a frame time. Because of a consequently boosted dynamic range, the imaging array of the invention is capable of performing single-photon counting under ultra-low light through high-flux environments. On the other hand, since the multiple-event architecture is implemented in a hybrid structure, back-illumination and close-to-unity fill factor can be realized, and maximized quantum efficiency can also be achieved in the detector array.

Zheng, Xinyu↗

NASA NTRSDate not supplied

Payload Fairing Acoustic Trade Study: Fill Effect Modeling

A review of acoustic fill effect was conducted using vibroacoustic models of the NASA Space Launch System Block 1B 8.4-meter Payload Fairing. Fill effect is the term used to describe how sound pressure levels (SPLs) inside of a launch vehicle’s payload cavity change when a payload is present, compared to that of an unfilled cavity. Several vibroacoustic models with various payload shapes were developed and the deviation in output from an unfilled cavity model were compared to an analytical fill effect calculation. The analytical expression for the fill effect correction factor, known as the fill factor, is published in NASA-STD-7001B. The development and validation of the NASA fill factor is discussed to provide context for this study and define important variables including the volume fill percentage and the fairing-payload separation gap. The fill factor is reviewed from two perspectives; a global perspective which defines the volume ratio with respect to the entire fairing cavity, and a local perspective which defines the volume ratio with respect to a zone of interest dependent on the payload’s height. The global perspective was considered because it allows a decoupling of the volume ratio and fairing-payload separation gap variables. Both the global and local fill factor methods have difficulty capturing low frequency SPL because of a breakdown in the underlying assumptions of a diffuse acoustic field. Spatial variation in the pressure field at low frequency showed that axially oriented standing waves may be of concern for sensitive payload components; radial variation in SPL was found to be less significant. Further, a novel secondary derivation of the theoretical fill factor is posed for future work in which the absorption characteristics of the payload and fairing surfaces are considered. This work is supported by the NASA Glenn Research Center and the Space Launch System Payload Fairing Working Group.

Spacecraft environments↗