Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FCC LATTICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Phonon-deformational generalized ginzburg-landau functionals for describing martensite transitions between FCC and BCC structures in metals

A method is developed for theoretical description of martensite transitions between fcc and bcc phases of metals based on generalized Ginzburg-Landau functionals (GGLFs), in which the transformation parameters are the 'phonon' parameter describing relative slips of close-packed atomic planes and fcc lattice deformations in the region of a martensite inclusion. General expressions are proposed for calculating the deformational contributions to the GGLF. Local strains and local elastic moduli in the region of martensite inclusions are estimated numerically. The possibility of constructing phenomenological expressions for the GGLF using interpolations of available experimental data on the structure and elastic moduli in the fcc and bcc phases is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of lattice orientation on compressive properties of selective laser sintered nylon lattice coupons

As AM lattices become more popular in medical devices, it is important to consider how lattice design parameters affect the mechanical integrity and performance of a device. This research investigated the effect of lattice orientation on the compressive mechanical response of five common lattice geometries: Hexagonal Honeycomb (Hex), Diamond, Voronoi Tessellation Method (VTM), sheet-based Gyroid, and Face-Centered-Cubic (FCC). Samples were tested at two relative densities and eight orientations, printed in Nylon 12 (PA2200) on an EOS P396. The mechanical response was compared to simulated finite element analysis (FEA) response for Hex and FCC lattices. Hex lattices displayed significant orientation dependance. Diamond lattices demonstrated some orientation dependance when at a lower relative density. Gyroid, FCC, and VTM all displayed minimal orientation dependance. Increasing lattice relative density appeared to reduce anisotropy among tested orientations of all lattice geometries except Hex. FEA simulations were able to produce a trend response that matched the mechanical response trends based on the investigated orientations. Furthermore, these results support the need for multi axial lattice mechanical test considerations. It also bolsters the need for lattice FEA models to have a sufficient comparator when identifying “worst-case” lattice test scenarios.

36 MATERIALS SCIENCE↗

Martensitic Transformation of Close-Packed Polytypes of Block Copolymer Micelles

Here, we report martensitic shear transformation of strongly segregated block copolymer micelles on face-centered cubic (FCC) lattices to hexagonally close-packed (HCP) structures elucidated by X-ray scattering characterizations. The initial FCC crystal structures of the block copolymer micelles were prepared by direct dissolution of poly(1,2-butadiene-b-ethylene oxide) (PB-PEO) diblock copolymer in the water at 25 °C, and the FCC crystal domains were shear-aligned during the sample preparation process for the X-ray scattering measurements. Heating the shear-aligned FCC crystals of the PB-PEO micelles above 80 °C initiated the transformation to HCP structures, which are also found stable at 25 °C when cooled from the transition temperature. Interestingly, we found that the HCP crystal domains are also aligned, and this suggests that the FCC-to-HCP phase transition has occurred by the martensitic shear transformation. Scattering pattern analysis reveals that the martensitic shear transformation proceeds by preferentially dislocating a specific set of two-dimensional hexagonal close-packed (2D-HCP) layers among four equivalent 2D-HCP layers of the initially shear-aligned FCC crystals. We believe that the selective martensitic shear transformation originates from the orthorhombic-like morphology of the FCC crystal domains formed by slip dislocations and stratifications of initial FCC crystal grains during the sample preparation process. In the shear-aligned FCC crystals with the orthorhombic-like crystal domains, the specific 2D-HCP layers chosen for the martensitic shear transformation have the least area of dislocations, i.e., the least kinetic energy barrier, for the FCC-to-HCP phase transition and appear to be preferentially utilized. These results show that the size and morphology of crystal domains are critical to the formation, stability, and transformation of crystalline structures and consequently control the polymorphism of solid compounds.

36 MATERIALS SCIENCE↗

Spin density stabilization of local distortions induced by a monovacancy in δ -Pu

Density functional theory calculations elucidate crystallographic and electronic structural responses of the fcc delta phase of plutonium (δ-Pu) to point defects. Discussed are responses that vary from a defect exhibiting a local structural instability common in fcc metals to an unusual defect structure that mimics properties similar to the monoclinic α phase. In the prior case, the existence of a self-vacancy when ionic relaxation is allowed induces in the fcc lattice a local tetragonal instability in nearest-neighbor atoms, slight electronic charge increase, and a spin-density decrease. However, in the latter case, after ionic relaxation, the defect is not recognizable as the structure of a vacant site common to many simple fcc metals, but is a complex extended defect involving neighboring atoms to collectively exhibit loss of lattice symmetry through formation of short Pu-Pu bonds and associated narrow bands at the Fermi energy. Partial density of states (PDOS) indicates that these narrow bands form as spectral weighting from the less energetic 6d electronic states is shifted to the 5f electronic states by means of the spin density, which occupies states at the Fermi energy. Finally, the PDOS of a 5f system exhibiting narrow bands at the Fermi energy is associated with the formation of an unusual defect structure in the lattice.

36 MATERIALS SCIENCE↗

Seed-Mediated Growth of Au Nanospheres into Hexagonal Stars and the Emergence of a Hexagonal Close-Packed Phase

Gold (Au) typically crystallizes in a cubic close-packed ( ccp ) structure to present a face-centered cubic ( fcc ) lattice or crystal phase. Herein, we demonstrate that Au nanoscale hexagonal stars featuring a hexagonal close-packed (hcp) structure can be synthesized in an aqueous system in the presence of fcc -Au nanospheres as the seeds. The success of this synthesis critically relies on the use of ethylenediaminetetraacetic acid to complex with Au 3+ ions (the precursor) and the introduction of 2-phospho-l-ascorbic acid trisodium salt (Asc-2P) as a novel reducing agent to maneuver the reduction kinetics. The use of Asc-2P favorably promotes the formation of hexagonal stars with uneven surfaces at the top and bottom faces, together with concave side faces around the edges. By varying the amount of Asc-2P to fine-tune the reduction kinetics, we can adjust the concaveness of the side faces, with a faster reduction rate favoring greater concaveness and a red shift of the plasmon resonance peak to the near-infrared. For the first time, our results suggest that the phosphate and hydroxyl groups can act synergistically in controlling the morphology of Au nanocrystals. Most significantly, the newly deposited Au atoms can also crystallize in an hcp structure, leading to the observation of a phase transition from fcc to hcp along the growth direction. This new protocol based upon kinetic control can be potentially extended to other noble metals for the facile synthesis of nanocrystals featuring unprecedented structures or phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and Stability of Lanthanum Superhydrides

Abstract Recent theoretical calculations predict that megabar pressure stabilizes very hydrogen‐rich simple compounds having new clathrate‐like structures and remarkable electronic properties including room‐temperature superconductivity. X‐ray diffraction and optical studies demonstrate that superhydrides of lanthanum can be synthesized with La atoms in an fcc lattice at 170 GPa upon heating to about 1000 K. The results match the predicted cubic metallic phase of LaH 10 having cages of thirty‐two hydrogen atoms surrounding each La atom. Upon decompression, the fcc‐based structure undergoes a rhombohedral distortion of the La sublattice. The superhydride phases consist of an atomic hydrogen sublattice with H−H distances of about 1.1 Å, which are close to predictions for solid atomic metallic hydrogen at these pressures. With stability below 200 GPa, the superhydride is thus the closest analogue to solid atomic metallic hydrogen yet to be synthesized and characterized.

Geballe, Zachary M.↗

Symmetry-specific characterization of bond orientation order in DNA-assembled nanoparticle lattices

Bond-orientational order in DNA-assembled nanoparticles lattices is explored with the help of recently introduced Symmetry-specific Bond Order Parameters (SymBOPs). Here, this approach provides a more sensitive analysis of local order than traditional scalar BOPs, facilitating the identification of coherent domains at the single bond level. The present study expands the method initially developed for assemblies of anisotropic particles to the isotropic ones or cases where particle orientation information is unavailable. The SymBOP analysis was applied to experiments on DNA-frame-based assembly of nanoparticle lattices. It proved highly sensitive in identifying coherent crystalline domains with different orientations, as well as detecting topological defects, such as dislocations. Furthermore, the analysis distinguishes individual sublattices within a single crystalline domain, such as pair of interpenetrating FCC lattices within a cubic diamond. The results underscore the versatility and robustness of SymBOPs in characterizing ordering phenomena, making them valuable tools for investigating structural properties in various systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The frustrated fcc antiferromagnet Ba 2 YOsO 6 : Structural characterization, magnetic properties and neutron scattering studies

Here we report the crystal structure, magnetization, and neutron scattering measurements on the double perovskite Ba 2 YOsO 6 . The Fm$\bar{3}$m space group is found both at 290 K and 3.5 K with cell constants a 0 =8.3541(4) Å and 8.3435(4) Å, respectively. Os 5+ (5d 3 ) ions occupy a nondistorted, geometrically frustrated face-centered-cubic (fcc) lattice. A Curie-Weiss temperature θ ~₋700 K suggests the presence of a large antiferromagnetic interaction and a high degree of magnetic frustration. A magnetic transition to long-range antiferromagnetic order, consistent with a type-I fcc state below T N ~69 K, is revealed by magnetization, Fisher heat capacity, and elastic neutron scattering, with an ordered moment of 1.65(6) μ B on Os 5+ . The ordered moment is much reduced from either the expected spin-only value of ~3 μ B or the value appropriate to 4d 3 Ru 5+ in isostructural Ba 2 YRuO 6 of 2.2(1) μ B , suggesting a role for spin-orbit coupling (SOC). Triple-axis neutron scattering measurements of the order parameter suggest an additional first-order transition at T=67.45 K, and the existence of a second-ordered state. We find time-of-flight inelastic neutron results reveal a large spin gap Δ~17 meV, unexpected for an orbitally quenched, d 3 electronic configuration. In conclusion, we discuss this in the context of the ~5 meV spin gap observed in the related Ru 5+ ,4d 3 cubic double perovskite Ba 2 YRuO 6 , and attribute the ~3 times larger gap to stronger SOC present in this heavier, 5d, osmate system.

36 MATERIALS SCIENCE↗

Lattice Distortion and Phase Stability of Pd-Doped NiCoFeCr Solid-Solution Alloys

In the present study, we have revealed that (NiCoFeCr)100−xPdx (x= 1, 3, 5, 20 atom%) high-entropy alloys (HEAs) have both local- and long-range lattice distortions by utilizing X-ray total scattering, X-ray diffraction, and extended X-ray absorption fine structure methods. The local lattice distortion determined by the lattice constant difference between the local and average structures was found to be proportional to the Pd content. A small amount of Pd-doping (1 atom%) yields long-range lattice distortion, which is demonstrated by a larger (200) lattice plane spacing than the expected value from an average structure, however, the degree of long-range lattice distortion is not sensitive to the Pd concentration. The structural stability of these distorted HEAs under high-pressure was also examined. The experimental results indicate that doping with a small amount of Pd significantly enhances the stability of the fcc phase by increasing the fcc-to-hcp transformation pressure from ~13.0 GPa in NiCoFeCr to 20–26 GPa in the Pd-doped HEAs and NiCoFeCrPd maintains its fcc lattice up to 74 GPa, the maximum pressure that the current experiments have reached.

36 MATERIALS SCIENCE↗

Computing the Critical Temperature of the Affine-Transformed $D=3$ Ising Model Using Masked Autoregressive Flow

The simple Ising model provides a rich environment to build and study lattice field theories. As part of an ongoing project to construct a conformal field theory (CFT) on an arbitrarily curved manifold, in this work we develop methods to measure the critical temperature $β_c$ of the affine-transformed Ising model on the face-centered cubic (FCC) lattice. The main challenge in this endeavor is finding a computationally efficient and accurate method of interpolating and extrapolating Monte Carlo observables with respect to coupling coefficients and temperature. Herein, we compare two such methods. A traditional statistical approach uses the multiple histogram (MH) method, while a newer machine learning approach uses a masked autoregressive flow (MAF) to estimate the underlying probability density function of a set of observables. While the MH method is specifically designed to interpolate and extrapolate Monte Carlo observables, we find that MAF is a viable alternative for measuring $β_c$ with a computational cost that scales more favorably. Furthermore, we comment on additional advantages of MAF relevant to our work, such as extrapolating in system volume.

Svenson, Kai [Texas U.]↗

Modeling material interfaces with hybrid adhesion method

A molecular dynamics simulation approach is presented to approximate layered material structures using discrete interatomic potentials through classical mechanics and the underlying principles of quantum mechanics. This method isolates the energetic contributions of the system into two pure material layers and an interfacial region used to simulate the adhesive properties of the diffused interface. The strength relationship of the adhesion contribution is calculated through small-scale separation calculations and applied to the molecular surfaces through an inter-layer bond criterion. By segregating the contributions into three regions and accounting for the interfacial excess energies through the adhesive surface bonds, it is possible to model each material with an independent potential while maintaining an acceptable level of accuracy in the calculation of mechanical properties. This method is intended for the atomistic study of the delamination mechanics, typically observed in thin-film applications. Therefore, the work presented in this paper focuses on mechanical tensile behaviors, with observations in the elastic modulus and the delamination failure mode. To introduce the hybrid adhesion method, we apply the approach to an ideal bulk copper sample, where an interface is created by disassociating the force potential in the middle of the structure. Various mechanical behaviors are compared to a standard EAM control model to demonstrate the adequacy of this approach in a simple setting. In addition, we demonstrate the robustness of this approach by applying it on (1) a Cu-Cu 2 O interface with interactions between two atom types, and (2) an Al-Cu interface with two dissimilar FCC lattices. These additional examples are verified against EAM and COMB control models to demonstrate the accurate simulation of failure through delamination, and the formation and propagation of dislocations under loads. Finally, the results conclude that by modeling the energy contributions of an interface using hybrid adhesion bonds, we can provide an accurate approximation method for studies of large-scale mechanical properties, as well as the representation of various delamination phenomena at the atomic scale.

36 MATERIALS SCIENCE↗

Materials Fingerprinting Classification

Significant progress in many classes of materials could be made with the availability of experimentally-derived large datasets composed of atomic identities and three-dimensional coordinates. Methods for visualizing the local atomic structure, such as atom probe tomography (APT), which routinely generate datasets comprised of millions of atoms, are an important step in realizing this goal. However, state-of-the-art APT instruments generate noisy and sparse datasets that provide information about elemental type, but obscure atomic structures, thus limiting their subsequent value for materials discovery. The application of a materials fingerprinting process, a machine learning algorithm coupled with topological data analysis, provides an avenue by which here-to-fore unprecedented structural information can be extracted from an APT dataset. As a proof of concept, the material fingerprint is applied to high-entropy alloy APT datasets containing body-centered cubic (BCC) and face-centered cubic (FCC) crystal structures. A local atomic configuration centered on an arbitrary atom is assigned a topological descriptor, with which it can be characterized as a BCC or FCC lattice with near perfect accuracy, despite the inherent noise in the dataset. Finally, this successful identification of a fingerprint is a crucial first step in the development of algorithms which can extract more nuanced information, such as chemical ordering, from existing datasets of complex materials.

36 MATERIALS SCIENCE↗

Structural studies of the disorder and phase transitions in the double perovskite Sr{sub 2}YTaO{sub 6}

The evolution of the crystal structure of the double perovskite Sr{sub 2}YTaO{sub 6} from room temperature to 1250 {sup o}C has been studied using powder neutron and synchrotron X-ray diffraction. At room temperature Sr{sub 2}YTaO{sub 6} crystallises in a monoclinic superstructure with the space group P2{sub 1}/n. The tilting of the octahedra evident in the room temperature structure is progressively lost on heating, resulting in a sequence of phase transitions that ultimately yields the cubic structure in space group Fm3m. The high temperature tetragonal and cubic phases are characterised by strongly anisotropic displacements of the anions. The amount of defects in the crystal structure of Sr{sub 2}YTaO{sub 6} is found to be sensitive to the preparative method. - Graphical abstract: Sr{sub 2}YTaO{sub 6} undergoes a sequence of phase transitions upon heating associated with the removal of the tilting of the octahedral. The number of defects in the structure is sensitive to the preparative conditions.

36 MATERIALS SCIENCE↗

Organic Modulators Enable Morphological Diversity in Colloidal Crystals Engineered with DNA

Colloidal crystal engineering with DNA is a powerful way of generating a wide variety of crystals spanning over 90 different symmetries. However, in many cases, crystals with well-defined habits are difficult, if not impossible, to make, in part due to rapid crystal defect formation and propagation. This is especially true in the case of face-centered cubic (FCC) structures. Herein, we report a strategy that uses formamide as a chemical modulator to slow down colloidal crystal growth, which decreases defect formation and yields higher-quality crystals. Formamide forms hydrogen bonds with DNA bases and destabilizes the DNA duplex; in the context of colloidal crystallization, formamide leads to the disassembly of undercoordinated particles (defect architectures) and facilitates their reassembly into structures with the maximum number of nearest-neighbor contacts and DNA bonds. Here, when targeting an FCC lattice comprised of DNA-modified spherical 20 nm particles, formamide promotes the formation of its Wulff polyhedron (a truncated octahedron), never observed before in colloidal crystal engineering with DNA. Importantly, kinetic habits, including tetrahedra, octahedra, icosahedra, and decahedra, are also observed depending on formamide concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure and mechanical properties of crystalline precipitate phases M 23 C 6 (M=Cr, W, Mo, Fe) in Ni-based superalloys

The presence of precipitate phases M 23 C 6 (M=Cr, Fe, Mo, or W) plays a significant role in the mechanical strength of Ni-based superalloys. The crystal structure of these complex carbides consists of 116 atoms in the cubic cell of an fcc lattice. Here we report the investigation of the electronic structure, interatomic bonding and mechanical properties for four binary phases of M 23 C 6 , and M 23 N 6 , and six ternary phases of M1 23–x M2 x C 6 . Based on the results of our comprehensive calculations and the evaluation of a quantum mechanical metric called the total bond order density (TBOD), we conclude that Fe tends to make the intermetallic structure less stable whereas W makes the crystal more compressible. We trace the root of these observations to the size of the metal ions and the complex interatomic bonding between C atoms and the metal d electrons. In addition, we correlate the TBOD with calculated mechanical properties leading to confirmation that Cr 23 C 6 is the most stable precipitate phase with superior overall physical properties. On the other hand, replacing C with N in these crystals does not result in discernable differences in their properties. Furthermore, our detailed investigation sheds much light on the use of carbides precipitates as a stabilization strategy for Ni-based superalloys.

36 MATERIALS SCIENCE↗

Spin dynamics in the skyrmion-host lacunar spinel GaV 4 S 8

Here in the lacunar spinel GaV 4 S 8 , the interplay of spin, charge, and orbital degrees of freedom produces a rich phase diagram that includes an unusual Néel-type skyrmion phase composed of molecular spins. To provide insight into the interactions underlying this complex phase diagram, we study the spin excitations in GaV 4 S 8 through inelastic neutron scattering measurements on polycrystalline and single crystal samples. Using linear spin wave theory, we describe the spin wave excitations using a model where V 4 clusters decorate an fcc lattice. The effective cluster model includes a ferromagnetic interaction and a weaker antisymmetric Dzyaloshinskii-Moriya interaction between the neighboring molecular spins. Our work clarifies the spin interactions in GaV 4 S 8 and supports the picture of interacting molecular clusters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗