Abstracts of digital computer code packages assembled by the Radiation Shielding Information Center
Abstracts of digital computer code packages for radiation shielding calculations
RADIATION SHIELDING↗
SEARCH · Engineering Papers
Results for “F CODES”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Unsteady Aerodynamic Effects on the Flight Characteristics of an F-16XL Configuration
Unsteady aerodynamic models based on windtunnel forced oscillation test data and analyzed with a fuzzy logic algorithm arc incorporated into an F-16XL flight simulation code. The reduced frequency needed in the unsteady models is numerically calculated by using a limited prior time history of state variables in a least-square sense. Numerical examples arc presented to show the accuracy of the calculated reduced frequency. Oscillatory control inputs are employed to demonstrate the differences in the flight characteristics based on unsteady and quasi-steady aerodynamic models. Application of the unsteady aerodynamic models is also presented and the results are compared with one set of F16XIL longitudinal maneuver flight data. It is shown that the main differences in dynamic response are in the lateral-directional characteristics, with the quasi-steady model being more stable than the flight vehicle, while the unsteady model being more unstable. Similar conclusions can also be made in a simulated rapid sideslipping roll. To improve unsteady aerodynamic modeling, it is recommended to acquire test data with coupled motions in pitch, roll and yaw.
Wang, Zhongjun↗
A parametric study of the leading edge attachment line for the F-16XL
A three-dimensional Navier-Stokes code is used to computationally simulate the flow about a modified F-16XL. Transition mechanisms (e.g. attachment line location and crossflow instability) near the swept wing leading edge are analyzed in detail. Flow visualization is used to study the influence of angle-of-attack on the aforementioned transition mechanisms. Validation of the code is accomplished by comparison of numerically generated surface pressures with that obtained by in-flight experiments.
Flores, Jolen↗
Fidelity of the PCM telemetry data information for OGO-B-D-E-F, RAE-A, ISIS-A and OSO-D-E-F satellites
Performance accuracy of pulse code modulation telemetry data information system for scientific satellites
Karras, T. J.↗
Toughness Testing for Liquid Hydrogen And Helium Temperatures - Validation of Austenitic Stainless Steels for 4K (-452F) Use
This presentation is an Existing Code Requirement: Charpy impact test at a temperature no higher than the design minimum temperature. The Current Practice: is not clear, the indications are that testing is sometimes performed at -320F (liquid nitrogen or "LN2") for that and all lower temperatures. In some cases testing is probably not performed and CGA indicated successful operation of systems at -453F without required test. The Ballot activity: C&S Connect Record 13-341, Ballot 13-1746, initially proposed Charpy testing (lateral expansion criteria) at -320F to validate use at -425 (liquid helium or "LHe"). and PTCS Proposal..
Greulich, Owen R.↗
Low Complexity Turbo-like Codes
This paper addresses the iterative devoding analysis, design, and performance of low complexity turbo like codes.
turbo-like codes iterative decoding analysis conca↗
Transmission characteristics of split-phase PCM codes, part 1 Final report
Transmission characteristics of split phase PCM codes
Chiu, R.-F.↗
Prediction of electron density in the boundary layer on entry vehicles with ablation
A rather general computer code has been developed for the numerical solution of the laminar boundary layer and thin shock layer (stagnation point only) equations for a multi-component gas mixture with finite reaction rates. The purpose of this paper is to indicate the capabilities of this computer program by presenting solutions for pure air flows and flows with carbon ablation. At the body surface the effects of oxidation and sublimation of carbon are taken into account with the following species included in the gas model: 0 2 , N 2 , O, N, NO, NO + , C 1 , C 2 , C 3 , CN, CO, and CO 2 . Results for the boundary layer along a 10° half-angle hyperboloid with ablation of carbon are compared to pure air results. Shock layer results for several wall temperatures and altitudes are presented and compared to pure air results. Other types of problems that can be solved with this computer code are indicated.
F. G. Blottner↗
PN ranging/telemetry transmission
System can transmit range-indicating pseudonoise (PN) codes and simultaneously transmit auxiliary information as binary data at a rate at least on order of pseudonoise chipping rate. PN code is modulated by data stream with relatively low bit rate. Data stream with high bit rate can be transmitted in same frequency band as PN ranging code.
Deerkoski, L. F.↗
QUICK-GEOMETRY, a rapid response method for mathematically modeling configuration geometry
The philosophy, development, and various applications of the QUICK-GEOMETRY system were outlined. This system provides a practical method for developing the geometry models that are essential to the operation of computer-based design and manufacturing systems. Of particular interest are the various methods for modeling surface geometry that are used by aerodynamic analysis codes.
Vachris, A. F., Jr.↗
Potential end-to-end imaging information rate advantages of various alternative communication systems
Various communication systems were considered which are required to transmit both imaging and a typically error sensitive, class of data called general science/engineering (gse) over a Gaussian channel. The approach jointly treats the imaging and gse transmission problems, allowing comparisons of systems which include various channel coding and data compression alternatives. Actual system comparisons include an Advanced Imaging Communication System (AICS) which exhibits the rather significant potential advantages of sophisticated data compression coupled with powerful yet practical channel coding.
Rice, R. F.↗
Evaluation of a velocity-split solution of the Navier-Stokes equations for fighter forebodies
A velocity-splitting method of solving the three-dimensional Navier-Stokes equations, originally designed for afterbody flows, is examined for its applicability for predicting fighter forebody flows. Results from the AFTEND Code are compared with wind tunnel data for two fighter configurations at a Mach number of 0.9 and angles-of-attack from 0 deg to 20 deg. Results compare well with data, and in areas where data do not exist, the viscous AFTEND results show realistic effects of viscosity compared to inviscid predictions. The inviscid results themselves are in general superior to results obtained from a small-disturbance transonic potential code.
Yaros, S. F.↗
Airfoil trailing edge flow measurements and comparison with theory, incorporating open wind tunnel corrections
Trailing edge data for boundary layer-near wake thickness parameters are given for airfoils and flat plates. Reynolds number effects are examined as a function of model size, velocity and boundary layer tripping. These data expand that presented previously by the authors particularly for airfoil non-zero angles of attack. Comparisons are made here with boundary layer calculations using potential flow modeling and a well documented two-dimensional finite-difference method for laminar and turbulent boundary layers. Open wind tunnel corrections to angle of attack and camber are developed and are incorporated in the potential flow modeling to assure correct comparisons for non-zero angles of attack. It was found that although the open tunnel flow turbulence affected boundary layer transition for the higher velocities the theory successfully 'brackets' the data. Comparisons demonstrate the degree of accuracy one might expect for the prediction of boundary layer thickness parameters when given only geometry and nominal flow conditions as input to boundary layer codes.
Brooks, T. F.↗
Pilot-Tone System for Mobile Communications
In mobile communication system called tone-calibrated technique, pilot tone provides phase- and amplitude-calibration reference to enable coherent demodulation of signal at receiver despite fading. Signal received by or from mobile terminal faded due to motion of terminal and propagation of signal along multiple paths. Fading introduces random amplitude modulation and phase modulation with bandwidth of twice Doppler frequency shift. Degrading effects of multipath fading reduced. Tonecalibrated technique for use with phase-modulated data or telephony systems using Manchester digital pulse-code modulation.
Davarian, F.↗
The SIMRAND 1 computer program: Simulation of research and development projects
The SIMRAND I Computer Program (Version 5.0 x 0.3) written in Microsoft FORTRAN for the IBM PC microcomputer and its compatibles is described. The SIMRAND I Computer Program comprises eleven modules-a main routine and ten subroutines. Two additional files are used at compile time; one inserts the system or task equations into the source code, while the other inserts the dimension statements and common blocks. The SIMRAND I Computer Program can be run on most microcomputers or mainframe computers with only minor modifications to the computer code.
Miles, R. F., Jr.↗
The effects of turbulence and stator/rotor interactions on turbine heat transfer. I - Design operating conditions
A combined experimental and analytical program was conducted to examine the effects of inlet turbulence, stator-rotor axial spacing, and relative circumferential spacing of first and second stators on turbine airfoil heat transfer. The experimental portion of the study was conducted in a large-scale (approximately 5X engine), ambient temperature, stage-and-a-half rotating turbine model. The data indicate that while turbine inlet turbulence can have a very strong impact on the first stator heat transfer, its impact in downstream rows is minimal. The effects on heat transfer produced by relatively large changes in stator/rotor spacing or by changing the relative row-to-row circumferential positions of stators were very small. Analytical results consist of airfoil heat transfer distributions computed with a finite-difference boundary layer code.
Blair, M. F.↗
Transonic flow solutions on general 3D regions using composite-block grids
The construction of computational fluid dynamics (CFD) codes for complicated regions is greatly simplified by a composite-block grid structure since, with the use of a surrounding layer of points on each block, a flow code is then only required basically to operate on rectangular computational regions. The necessary correspondence of points on the surrounding layers (image points) with interior points (object points) is set up by the grid code and made available to the CFD solution code.
Thompson, Joe F.↗
Fluid flow and heat convection studies for actively cooled airframes
The work done during the progress report period from May-October 1992 is summarized. The effect of wall thermal boundary conditions on flows over a step or rib when repeated rib roughness is used for heating augmentation is examined. In numerical investigations of various such laminar and turbulent flows, the local heat transfer coefficients on a forward-facing step or on a rib were found to be very sensitive to the wall thermal boundary condition. For the computation of constant property laminar flow, the wall thermal boundary conditions were either a uniform heat flux or a uniform temperature. Results (Nusselt number and isotherms) of the studies are included. The second part of the work consisted of using PHOENICS to solve the conjugate heat transfer problem of flow over a rib in channel. Finally, the algebraic stress model in the TEAM (Turbulent Elliptic Algorithm-Manchester) code was tested for jet impingement flow, but there needs to be an addition of the energy equation to the code.
Mills, A. F.↗