Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electromigration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Electromigration kinetics and critical current of Pb-free interconnects

Electromigration kinetics of Pb-free solder bump interconnects have been studied using a single bump parameter sweep technique. By removing bump to bump variations in structure, texture, and composition, the single bump sweep technique has provided both activation energy and power exponents that reflect atomic migration and interface reactions with fewer samples, shorter stress time, and better statistics than standard failure testing procedures. Contact metallurgies based on Cu and Ni have been studied. Critical current, which corresponds to the Blech limit, was found to exist in the Ni metallurgy, but not in the Cu metallurgy. A temperature dependence of critical current was also observed.

36 MATERIALS SCIENCE↗

Tuning the local temperature during feedback controlled electromigration in gold nanowires

Feedback controlled electromigration (FCE) in metallic nanowires has been widely used for various purposes. However, the control of the local temperature during FCE remains a challenge. Here, we report that the environment temperature can be used as a knob to tune the local temperature during FCE in gold nanowires. FCE was performed in gold nanowires at various environment temperatures ranging from 4.2 K to 300 K. We find that the dissipated power normalized by the cross section area of the nano constriction is linearly proportional to the environment temperature. Interestingly, the estimated local maximum temperature parabolically depends on the environment temperature. A minimum in the local temperature can be reached if an appropriate environment temperature is chosen. Our findings are well supported by the finite element simulation. Moreover, the data indicates the coupling between FCE triggering current density and local temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure, impurity and metal cap effects on Cu electromigration

Electromigration (EM) lifetimes and void growth of pure Cu, Cu(Mn) alloy, and pure Cu damascene lines with a CoWP cap were measured as a function of grain structure (bamboo, near bamboo, and polycrystalline) and sample temperature. The bamboo grains in a bamboo-polycrystalline grained line play the key role in reducing Cu mass flow. The variation in Cu grain size distribution among the wafers was achieved by varying the metal line height and wafer annealing process step after electroplating Cu and before or after chemical mechanical polishing. The Cu grain size was found to have a large impact on Cu EM lifetime and activation energy, especially for the lines capped with CoWP. The EM activation energy for pure Cu with a CoWP cap from near-bamboo, bamboo-polycrystalline, mostly polycrystalline to polycrystalline only line grain structures was reduced from 2.2 ± 0.2 eV, to 1.7 ± 0.1 eV, to 1.5 ± 0.1 eV, to 0.72 ± 0.05 eV, respectively. The effect of Mn in Cu grain boundary diffusion was found to be dependent on Mn concentration in Cu. The depletion of Cu at the cathode end of the Cu(Mn) line is preceded by an incubation period. Unlike pure Cu lines with void growth at the cathode end and hillocks at the anode end of the line, the hillocks grew at a starting position roughly equal to the Blech critical length from the cathode end of the Cu(Mn) polycrystalline line. The effectiveness of Mn on Cu grain boundary migration can also be qualitatively accounted for by a simple trapping model. The free migration of Cu atoms at grain boundaries is reduced by the presence of Mn due to Cu-solute binding. A large binding energy of 0.5 ± 0.1 eV was observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Density functional theory study of the influence of segregation of S or Fe impurities on electromigration in nano-grained copper interconnects

The reliability of the circuits in the modern microelectronic devices remains, during last decades, one of the key topics in research and gains an attention for improving the promising candidates for conductors. Improvement of materials for such applications can be obtained by both electronic and compositional optimization. Ab initio calculations using full potential linearized augmented plane wave method in density functional theory are applied to explain the reduction in electromigration effect in the vicinity of grain boundaries (GB) in nano-structured Cu due to the segregation of some additives to the GB. Several possible mechanisms are considered. It is demonstrated that S atoms segregated to GB of nano-structured Cu lead to the growth of effective mass of the electrons. This decreases the mobility of electrons in external electric field, and, correspondingly, the momentum that they may transfer to atoms in collisions. Fe atoms segregated to GB of Cu create new empty states at the top of the valance band. These non-occupied states may stimulate the current of holes when external electric field is applied to the system, creating the “hole wind” in the direction opposite to the current of electrons. Such “hole wind” will compensate the forces generated by the electron current and therefore will reduce the total momentum transfer between charge carriers and atoms. The calculated electron density maps show that S and Fe segregating to Cu GB increases the strength of covalent bonds reducing the diffusion of Cu atoms in the vicinity of GB.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural tuning of nanogaps using electromigration induced by field emission current with bipolar biasing

We report a new method for fabrication of Ni nanogaps based on electromigration induced by a field emission current. This method is called “activation” and is demonstrated here using a current source with alternately reversing polarities. The activation procedure with alternating current bias, in which the current source polarity alternates between positive and negative bias conditions, is performed with planar Ni nanogaps defined on SiO{sub 2}/Si substrates at room temperature. During negative biasing, a Fowler-Nordheim field emission current flows from the source (cathode) to the drain (anode) electrode. The Ni atoms at the tip of the drain electrode are thus activated and then migrate across the gap from the drain to the source electrode. In contrast, in the positive bias case, the field emission current moves the activated atoms from the source to the drain electrode. These two procedures are repeated until the tunnel resistance of the nanogaps is successively reduced from 100 TΩ to 48 kΩ. Scanning electron microscopy and atomic force microscopy studies showed that the gap separation narrowed from approximately 95 nm to less than 10 nm because of the Ni atoms that accumulated at the tips of both the source and drain electrodes. These results show that the alternately biased activation process, which is a newly proposed atom transfer technique, can successfully control the tunnel resistance of the Ni nanogaps and is a suitable method for formation of ultrasmall nanogap structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simultaneous fabrication of nanogap electrodes using field-emission-induced electromigration

We present a simple technique for simultaneous control of the electrical properties of multiple Ni nanogaps. This technique is based on electromigration induced by a field emission current and is called “activation.” Simultaneous tuning of the tunnel resistance of multiple nanogaps was achieved by passing a Fowler–Nordheim (F-N) field emission current through an initial group of three Ni nanogaps connected in series. The Ni nanogaps, which had asymmetrical shapes with initial gap separations in the 80–110-nm range, were fabricated by electron-beam lithography and a lift-off process. By performing the activation procedure, the current–voltage properties of the series-connected nanogaps were varied simultaneously from “insulating” to “metallic” via “tunneling” properties by increasing the preset current of the activation procedure. We can also simultaneously control the tunnel resistances of the series-connected nanogaps, which range from a resistance of the order of 100 TΩ–100 kΩ, by increasing the preset current from 1 nA to 30 μA. This tendency is quite similar to that of individually activated nanogaps, and the tunnel resistance values of the simultaneously activated nanogaps were almost the same at each preset current. These results clearly imply that the electrical properties of the series-connected nanogaps can be controlled simultaneously via the activation procedure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of the crystallographic orientation of Sn on the electromigration of Cu/Sn-Ag-Cu/Cu ball joints

Electromigration behavior and fast circuit failure with respect to crystallographic orientation of Sn grains were examined. The test vehicle was Cu/Sn-3.0 wt% Ag-0.5 wt% Cu/Cu ball joints, and the applied current density was 15 kA/cm 2 at 160 °C. The experimental results indicate that most of the solder bumps show different microstructural changes with respect to the crystallographic orientation of Sn grains. Fast failure of the bump occurred due to the dissolution of the Cu circuit on the cathode side caused by the fast interstitial diffusion of Cu atoms along the c-axis of the Sn grains when the c-axis was parallel to the electron flow. Slight microstructural changes were observed when the c-axis was perpendicular to the electron flow. In addition, Cu 6 Sn 5 intermetallic compound (IMC) was formed along the direction of the c-axis of the Sn grains instead of the direction of electron flow in all solder ball joints.

36 MATERIALS SCIENCE↗

Electromigration failure in YBa2Cu3O(7-x) thin films

Electromigration failure in highly oriented YBa2Cu3O(7-x) thin films below the superconducting transition temperature is reported here for the first time. The film on SrTiO3 failed at 86 K, 230,000 A/sq cm, while that on LaAlO3 failed at 84 K, 930,000 A/sq cm. Scanning electron microscopy and energy dispersive X-ray analysis of the films after failure shows that Cu migrates preferentially away from the failure region toward the electrode.

Vitta, Satish↗

Pre-determining the location of electromigrated gaps by nonlinear optical imaging

In this paper we describe a nonlinear imaging method employed to spatially map the occurrence of constrictions occurring on an electrically stressed gold nanowire. The approach consists at measuring the influence of a tightly focused ultrafast pulsed laser on the electronic transport in the nanowire. We found that structural defects distributed along the nanowire are efficient nonlinear optical sources of radiation and that the differential conductance is significantly decreased when the laser is incident on such electrically induced morphological changes. This imaging technique is applied to pre-determine the location of the electrical failure before it occurs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electromigration Effect on Vacancy Islands Nucleation on Si(100) Surface during Sublimation

By means of in situ ultrahigh vacuum reflection electron microscopy, the nucleation of vacancy islands on wide terraces of the Si(100) surface is investigated. The temperature dependence of the displacement of a vacancy island nucleation center is determined in the process of heating a sample with a dc electric current. On the basis of a theoretical model, the effective electric charge of addimers is estimated in the direction across dimer rows of the surface. The effective charge has a positive sign and does not exceed 15 units of the elementary charge in the temperature range of 1020–1120°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗