Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Radio-frequency electrical properties of some neat and metal-doped polyimides

As the size and complexity of aerospace systems increase, the uses of polymers are also expected to increase. Polyimides constitute one promising generic class of polymeric materials. They retain good mechanical and physical properties at higher temperatures and absorb less moisture than do the epoxies, which are the polymers most frequently used in present aerospace systems. The properties of these polyimide materials are, therefore, of considerable interest to the aerospace community. Of particular importance are the electrical properties because these properties relate to both electrical and structural applications.

Long, E. R., Jr.↗
NASA NTRS1987

Mechanical and electrical properties of graphite fiber-epoxy composites made from pristine and bromine intercalated fibers

The mechanical and electrical properties of pristine and bromine intercalated graphite fiber-epoxy composites were compared. The two types of composite were similar in terms of tensile modulus, tensile strength, and Poisson's Ratio. However, the interlaminar shear strength of the brominated composite was 18 percent greater than its pristine counterpart. Only slight differences were observed in flexural properties. A five-fold decrease was observed in the electrical resistivity of the brominated composite parallel to the axis of the fibers, resulting in a unidirectional resistivity of about 90 microOmega/cm. Transverse resistivity was unaffected. Both types of composite were subjected to a simulated lightning strike of 10 KJ (at a peak current of 150 kA), and the composite with the intercalated graphite exhibited less damage.

Jaworske, Donald A.↗
NASA NTRS1974

Surface electrical properties experiment, part 1

The work is reported which was performed on the Surface Electrical Properties Experiment Data Acquisition System. Areas discussed include: data handling and processing, installation and external signal application, operation of the equipment, and digital output. Detailed circuit descriptions are included.

Strangway, D. W.↗
NASA NTRS1990

Electrical properties of the middle atmosphere

Probe techniques have been utilized extensively to measure middle atmospheric electrical properties such as the polar components of conductivity, ion mobility and density. The most variable of these parameters is conductivity, which is dependent on both charge mobility and concentration. Overall conductivity variations, attributable to different geophysical conditions, can exceed several orders of magnitude at some altitudes. Also, measurements of conductivity over the 20 to 90 km region indicate a general exponential increase with altitude, exceeding seven orders of magnitude during certain conditions. Gerdien condensers, on occasion, have measured very low-mobility positive ions in addition to the more commonly observed molecular species. These smaller mobility values appear to indicate the presence of very large ions at some altitudes, possibly charged particulates, having mass sizes greater than those identifiable by presently flown mass spectrometers. The presence of these large ions is of importance to middle atmospheric electrodynamics as a potential causal mechanism for measured large electric fields.

Mitchell, John D.↗
NASA NTRS1994

Optical and Electrical Properties of Reactively Sputtered TiN, ZrN, and HfN Thin Films

Thin films of titanium, zirconium, and hafnium nitride are prepared by DC magnetron reactive sputtering at room temperature on fused silica, optical glass, and silicon substrates. Deposition parameters are investigated in order to obtain stoichiometric films. The optical and electrical properties of the films as a function of nitrogen partial pressure are determined. The results show that an inverse correlation exists between the optical reflectance and the electrical resistivity of the films. Ellipsometer data for all three films show that their refractive index in the visible spectrum is decreased by increasing the film thickness while the extinction coefficient is unchanged. Thin films of TiN have the lowest room temperature resistivity relative to ZrN and HfN thin films.

Reactive↗
NASA NTRS1973

Surface electrical properties experiment study phase, volume 1

The evolution of a conceptual design of the flight hardware for the surface electrical properties experiment (SEP), the definition of requests for proposals, the analysis of proposals submitted by prospective flight hardware subcontractors, and recommendations for the flight configuration to be implemented are discussed. Initial efforts were made to assess the electromagnetic environment of the SEP experiment. An EMI receiver and tri-loop antenna were constructed and tests of opportunity were performed with a lunar roving vehicle (LRV). Initial analyses were made of data from these tests with support from this contract, analyses which were continued in depth under the hardware contract.

Meyer, J. W.↗
NASA NTRS1989

Surface morphologies and electrical properties of molecular beam epitaxial InSb and InAs(x)Sb(1-x) grown on GaAs and InP substrates

Surface morphologies and electrical properties of molecular beam epitaxial InSb and InAs(x)Sb(1-x) grown on GaAs and InP substrates are discussed. The crystals are all n-type at 300 K and lower temperatures. The surface morphology and electrical characteristics are strongly dependent on Sb(4)/In flux ratio and substrate temperature. The highest mobilities in InSb on InP are 70,000 at 300 K and 110,000 cm(2)/V.s (n=3x10(15) cm(-3)) at 77 K. The mobilities in the alloys also increase monotonically with lowering of temperature. Good quality InAs(x)Sb(1-x) was grown directly on InP substrates by molecular beam epitaxy.

Oh, J. E.↗
NASA NTRS1972

Theoretical analyses on Apollo lunar surface electrical properties experiment transmitter antenna.

The purpose of this study is to investigate the characteristics of the transmitter antenna of lunar surface electrical properties experiment. It is desirable to evaluate the current distribution, far-field radiation pattern and input impedance of the transmitter antenna in order to determine the electromagnetic sounding effects from the lunar subsurface. The analysis is based on the treatise of the long wire antenna with passive loadings. Both cases of the antenna placed in free space and in a dissipative medium are taken into consideration.-

Yu, I.-P.↗
NASA NTRS1998

A Study of the Electrical Properties and Mineralogy of the Surface of Venus

This final report contains a listing of published papers and abstracts which address the electrical properties and minerology of the surface of Venus. The topics of these papers include: Subduction on the margins of coronae on Venus: Evidence from radiothermal emissivity measurements; The weathering process on Venus takes 2-3 hundred million years: Evidence from radiothermal emissivity signatures at coronae; SO2 and CH4 levels in the Venusian atmosphere, measured by Pioneer Venus: Caused by plinian-style volcanic activity at Maat Mons?; Magellan reveals Venus; Recent volcanic activity on Venus: Evidence from radiothermal emissivity signatures; Occurrences of low-emissivity surface material at low altitudes on Venus: A window to the past; Must the Venus surface material contain hematite?; Rock weathering on the surface of Venus; and Comment on "The Rate of Pyrite Decomposition on the Surface of Venus."

Wood, John A.↗
NASA NTRS1997

A Study of the Electrical Properties and Mineralogy of the Surface of Venus

This annual progress report is a list of papers on a study of the electrical properties and mineralogy of the surface of Venus. These papers were written by P. I. Wood and C. A. Robinson. Titles include: Subduction on the margins of coronae on Venus: Evidence from radiothermal emissivity measurements; The weathering process on Venus takes 2-3 hundred million years: Evidence from radiothermal emissivity signatures at coronae; SO2 and CH4 levels in the Venusian atmosphere, measured by Pioneer Venus: Caused by plinian-style volcanic activity at Maat Mons; Magellan reveals Venus; Recent volcanic activity on Venus: Evidence from radiothermal emissivity signatures; Occurrences of low-emissivity surface material at low altitudes on Venus: A window to the past; Must the Venus surface material contain hematite; Rock weathering on the surface of Venus; Comment on "The Rate of Pyrite Decomposition on the Surface of Venus-by J. A. Wood, and R. Brett; and Complex dielectric constants and magnetic permeabilities of mineral mixtures-by De Roo, R.D, C.A. Robinson, F.T. Ulaby, and J.A. Wood.

Wood, John A.↗
NASA NTRS1983

Interfacial electrical properties of ion-beam sputter deposited amorphous carbon on silicon

Amorphous, 'diamond-like' carbon films have been deposited on Si substrates, using ion-beam sputtering. The interfacial properties are studied using capacitance and conductance measurements. Data are analyzed using existing theories for interfacial electrical properties. The density of electronic states at the interface, along with corresponding time constants are determined.

Khan, A. A.↗
NASA NTRS1972

Engineering support activities for the Apollo 17 Surface Electrical Properties Experiment.

Description of the engineering support activities which were required to ensure fulfillment of objectives specified for the Apollo 17 SEP (Surface Electrical Properties) Experiment. Attention is given to procedural steps involving verification of hardware acceptability to the astronauts, computer simulation of the experiment hardware, field trials, receiver antenna pattern measurements, and the qualification test program.

Cubley, H. D.↗