Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Earth crust”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The impact of alkali‐ion intercalation on redox chemistry and mechanical deformations: Case study on intercalation of Li, Na, and K ions into FePO 4 cathode

Abstract Batteries made of charge carriers from Earth‐crust abundant materials (e.g., Na, K, and Mg) have received extensive attention as an alternative to Li‐ion batteries for grid storage. However, a lack of understanding of the behavior of these larger ions in the electrode materials hinders the development of electrode structures suitable for these large ions. In this study, we investigate the impact of alkali ions (Li, Na, and K) on the redox chemistry and mechanical deformations of iron phosphate composite cathodes by using electrochemical techniques and in situ digital image correlation. Na‐ion and Li‐ion intercalation demonstrate a nearly linear correlation between electrochemical strains and the state of charge and discharge. The strain development shows nonlinear dependance on the state of charge and discharge for K ions. Strain rate calculations show that K ion intercalation results in a progressive increase in the strain rate for all cycles. Li and Na intercalation induce nearly constant strain rates with the exception of the first discharge cycle of Na intercalation. When the same amount of ions are inserted into the electrode, the electrode shows the lowest strain generation upon Li intercalation compared to larger alkali ions. Na and K ions induce similar volumetric changes in the electrode when the state of charge and discharge is around 30%. Although the electrode experiences larger absolute strain generation at the end of the discharge cycles upon Na intercalation, strain rates were found to be greater for K ions. Potential‐dependent behaviors also demonstrate more sluggish redox reactions during K intercalation, compared to Li and Na. Our quantitative analysis suggests that the strain rate, rather than the absolute value of strain, is the critical factor in amorphization of the crystalline electrode.

25 ENERGY STORAGE↗

Alkaline Earth-Based Ternary Chalcogenide Nanocrystals: Cadmium- and Lead-Free Optical Materials

As some of the most abundant elements on the Earth’s crust, alkaline earths bear great potential in Cd- and Pb-free catalytic, energy conversion, and light-emitting devices. Further, because large electropositive alkaline earths (Ae) can adopt high coordination numbers, they offer structural complexity beyond the tetrahedral (c-Si, II–VI, III–V) or octahedral (IV–VI) atomic sites that─with the notable exception of halide perovskites─are ubiquitous among nanocrystalline semiconductors. Here, in this work, we present a general route to photoluminescent 6–125 nm nanocrystals of ternary AeIn 2 Ch 4 semiconductors (Ae = Sr, Ba; Ch = S, Se) featuring eight- (Ae) as well as four-coordinate (In and Ch) atomic sites. Powder X-ray diffraction, electron microscopy, optical absorption, photoluminescence, and solid-state (ss)NMR spectroscopies attest to the ternary composition and phase purity of the nanocrystals. Continuous shape measures pinpoint the degree of distortion of individual crystallographic sites from ideal coordination polyhedra, allowing us to identify two very distinct types of Se coordination environments. Based on their higher order, pseudo-3-fold rotational symmetry, we assign 77 Se ssNMR peaks with negligible chemical shift anisotropy (CSA) to pyramidalized Se sites with vacant-trigonal bipyramid-like geometries and those with larger CSA to lower symmetry Se sites with seesaw-distorted geometries. Calculations help to better understand the electronic band structure of these materials. The nanocrystals are stable at room temperature in open air for several weeks, and some compositions up to 1000 °C under Ar, making them strong candidates for practical applications.

alkaline earth↗

Deep mantle forces and the uplift of the Colorado Plateau

Since the advent of plate tectonics, it has been speculated that the northern extension of the East Pacific Rise, specifically its mantle source, has been over-ridden by the North American Plate in the last 30 Myrs. Consequently, it has also been postulated that the opening of the Gulf of California, the extension in the Basin and Range province, and the uplift of the Colorado Plateau are the resulting continental expressions of the over-ridden mantle source of the East Pacific Rise. However, only qualitative models based solely on surface observations and heuristic, simplified conceptions of mantle convection have been used in support or against this hypothesis. We introduce a quantitative model of mantle convection that reconstructs the detailed motion of a warm mantle upwelling over the last 30 Myrs and its relative advance towards the interior of the southwestern USA. The onset and evolution of the crustal uplift in the central Basin and Range province and the Colorado Plateau is determined by tracking the topographic swell due to this mantle upwelling through time. We show that (1) the extension and magmatism in the central Basin and Range province between 25 and 10 Ma coincides with the reconstructed past position of this focused upwelling, and (2) the southwestern portion of the Colorado Plateau experienced significant uplift between 10 Ma and 5 Ma that progressed towards the northeastern portion of the plateau. These uplift estimates are consistent with a young, ca. 6 Ma, Grand Canyon model and the recent commencement of mafic magmatism.

58 GEOSCIENCES↗

Nanostructured multilayered thin film barriers for Mg{sub 2}Si thermoelectric materials

The Mg{sub 2}Si-based alloys are promising candidates for thermoelectric energy conversion in the middle-high temperature range in order to replace lead compounds. The main advantages of silicide-based thermoelectrics are the nontoxicity and the abundance of their constituent elements in the earth crust. The drawback of such kind of materials is their oxygen sensitivity at high temperature that entails their use under vacuum or inert atmosphere. In order to limit the corrosion phenomena, nanostructured multilayered molybdenum silicide-based materials were deposited via RF magnetron sputtering onto stainless steel, alumina and silicon (100) to set up the deposition process and then onto Mg{sub 2}Si pellets. XRD, EDS, FE-SEM and electrical measurements at high temperature were carried out in order to obtain, respectively, the structural, compositional, morphological and electrical characterization of the deposited coatings. At the end, the mechanical behavior of the system thin film/Mg{sub 2}Si-substrate as a function of temperature and the barrier properties for oxygen protection after thermal treatment in air at high temperature were qualitatively evaluated by FE-SEM.

36 MATERIALS SCIENCE↗

Ultrahigh-energy neutrino follow-up of gravitational wave events GW150914 and GW151226 with the Pierre Auger Observatory

On September 14, 2015 the Advanced LIGO detectors observed their first gravitational wave (GW) transient GW150914. This was followed by a second GW event observed on December 26, 2015. Both events were inferred to have arisen from the merger of black holes in binary systems. Such a system may emit neutrinos if there are magnetic fields and disk debris remaining from the formation of the two black holes. With the surface detector array of the Pierre Auger Observatory we can search for neutrinos with energy Eν above 100 PeV from point like sources across the sky with equatorial declination from about -65° to +60°, and, in particular, from a fraction of the 90% confidence-level inferred positions in the sky of GW150914 and GW151226. A targeted search for highly inclined extensive air showers, produced either by interactions of downward-going neutrinos of all flavors in the atmosphere or by the decays of tau leptons originating from tau-neutrino interactions in the Earth’s crust (Earth-skimming neutrinos), yielded no candidates in the Auger data collected within ±500 s around or 1 day after the coordinated universal time (UTC) of GW150914 and GW151226, as well as in the same search periods relative to the UTC time of the GW candidate event LVT151012. As a result, from the non-observation we constrain the amount of energy radiated in ultrahigh-energy neutrinos from such remarkable events.

79 ASTRONOMY AND ASTROPHYSICS↗

Low pH Titanium Electrochemistry in the Presence of Sulfuric Acid and its Implications for Redox Flow Battery Applications

Titanium (Ti) is a promising elemental redox active species for redox flow batteries (RFBs) due to its 100x availability in the Earth crust, and 10x lower cost (compared to elemental vanadium). Furthermore, Ti salts are highly soluble in water and concentrations >5 M can be easily obtained. Seeking to harness the higher solubility (and hence energy density) of the Ti electrolyte for flow battery applications, the Ti 4+ /Ti 3+ redox couple was investigated at high concentrations (up to 5 M) relevant to RFB applications. The behavior of Ti ions in H 2 SO 4 supported electrolytes was investigated by varying the ratio of Ti redox active species to counterion. The electrochemical characteristics, transport properties, and redox kinetics of the Ti 4+ /Ti 3+ redox couple were measured and the impact of the Ti x+ to solvating ligand ratio was examined. The coordination structures around solvated Ti x+ ions were spectroscopically determined and the effect of solvation structure on the Ti 3+ /Ti 4+ redox rate constants were examined and correlated to the calculated solvation energy (hence distinguishing between inner- and outer-sphere processes) and the role of catalysts was addressed. The Ti electrolyte development guidelines presented herein will advance the development of Ti-based RFBs as a promising pathway towards cost effective, grid-scale energy storage.

Electrochemistry↗

Argonne’s global critical materials agent-based model (GCMat)

Several studies have identified rare earths as critical materials. Although reasonably abundant in the Earth’s crust, rare earths typically occur in low concentrations of mined ores. Processes for recovering rare earth concentrates from these ores are complex and capital intensive. Further, lead times for deposit development, licensing, and construction are long, with reports of 10- 15 years. China is a major player in the rare earths supply chain, both in production capacity and technology innovation. In 2017, China supplied more than 80% of global rare earth oxide demand. Rare earth elements (REEs) have unique magnetic, catalytic, and phosphorescent properties that significantly improve performance of a wide range of technologies. These technologies span aerospace, energy, telecommunications, electronics, transportation, defense, and other diverse applications. Consequently, disruptions in rare earth supply can have a significant societal impact. Estimating that impact requires understanding of the dynamics across the supply chain, from rare earth oxide extraction to end use application. This report documents Argonne’s Global Critical Materials model (GCMat), first described by Riddle et al. 2015. GCMat provides capabilities to explore supply chain dynamics and uncertainty under scenarios of demand growth or shrinkage, technology adoption, supply disruptions, and trade policies and mitigation strategies of new supply sources, product substitution, consumer thrifting, and stockpiling. Supply chain participants from rare earth mining through final demand are modeled as interacting agents who make market decisions independently as time progresses. Since the version documented in Riddle et al. 2015, GCMat has been expanded to cover additional REEs, derived products and supply chains that use these REEs, and includes new agent behaviors and modeling capabilities. Section 2 provides a summary of the GCMat model design, including the structure of the model and key assumptions, section 3 summarizes methods used for model calibration and sensitivity analysis, and section 4 provides examples of model results.

36 MATERIALS SCIENCE↗

NOvA joint $ν^{e}$ + $ν^{µ}$ oscillation results in neutrino and antineutrino modes

NOvA is an experiment devoted to studying neutrino oscillations in the NuMI neutrino beam from FNAL (USA). It is a long-baseline experiment consisting of two functionally identical, finely granulated detectors which are separated by 810 km of Earth crust and sited at 14 mrad off the beam axis. By measuring the transition probabilities P(νμ→νe \nu_\mu \rightarrow \nu_e ) and P(νμ→νμ \nu_\mu \rightarrow \nu_\mu ) NOvA is able to extract oscillation parameters: Δm232 \Delta m^2_{32} , mixing angle θ23 \theta_{23} , CP violating phase δCP \delta_{CP} and neutrino mass hierarchy. This analysis will be the first to include both neutrino (9⋅1020 9 \cdot 10^{20} POT) and antineutrino (7⋅1020 7 \cdot 10^{20} POT) data, which helps to resolve degeneracies in the oscillation probability. In this poster, the lastest NOvA oscillation results will be discussed, as well as important intermediate steps in νe \nu_e analysis like signal and background predictions, projected sensitivities in upcoming analyses will be presented.

Back, Ashley [Iowa State U.]↗

The geometrical analysis of partial fusion

Geometrical analysis of partial fusion in earth crust and mantle formation, discussing solid solution and boundaries in MgO-iron oxide- silicon dioxide system

Presnall, D. C.↗

Attempt at correlating Italian long lineaments from LANDSAT-1 satellite images with some geological phenomena. Possible use in geothermal energy research

By utilizing the images from the LANDSAT-1, in the spectral band 0.8-1.1 microns (near infrared), a photomosaic was obtained of Italian territory. From this mosaic the field of long lineaments was drawn, corresponding to fractures of the earth crust more than 100 km long. The relationship between lineaments, hot springs, volcanic areas, and earthquake epicenters is verified. There is a clear connection between long lineaments and hot springs: 78% of the springs are located on one or more lineaments, and the existence of hot lineaments was observed. A slightly weaker, but still significant, connection exists between the Pliocene-Quaternary volcanic areas and long lineaments. The relationship between earthquakes and long lineaments can only be verified in some cases. The lineaments which can be related to earthquakes have little or no connection with the other phenomena.

Barbier, E.↗

The mineralogy of global magnetic anomalies

Progress is reported in developing predictive abilities to evaluate the potential stabilities of magnetic minerals in the Earth crust and mantle by: (1) computing oxidation state profiling as a function of temperature and pressure; (2) compiling data on basalts to establish validity of the oxidation state profiles; (3) determining Fe-Ni alloys in association with magnetitie as a function of temperature and oxidation state; and (4) acquiring large chemical data banks on the mineral ilmenite which decomposes to mineral spinel in the presence of high sulfur or carbonate environments in the lower crust upper mantle. In addition to acquiring these data which are related to constraining Curie isotherm depths, an excellent correlation was found between MAGSAT anomaly data and the geology of West Africa.

Haggerty, S. E.↗

Dating Archean zircon by ion microprobe: New light on an old problem

Ion microprobe analysis of zircons from three sites (Watersmeet Dome in northern Michigan, Mount Sones in eastern Antarctica, and Mount Narryer in western Australia) is discussed. Implications of the results to Archean geochronology and early Earth crust composition are addressed.

Williams, I. S.↗