Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EVACUATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Mechanistic Pathways for N 2 O Elimination from trans -R 3 Sn-O-N=N-O-SnR 3 and for Reversible Binding of CO 2 to R 3 Sn-O-SnR 3 (R = Ph, Cy)

The rate and mechanism of the elimination of N 2 O from trans-R 3 Sn-O-N=N-O-SnR 3 (R = Ph ( 1 Ph ) and R = Cy ( 1 Cy )) to form R 3 Sn-O-SnR 3 (R = Ph ( 2 Ph ) and R = Cy ( 2 Cy )) have been studied using both NMR and IR techniques to monitor the reactions in the temperature range of 39–79 °C in C 6 D 6 . Activation parameters for this reaction are ΔH ‡ = 15.8 ± 2.0 kcal·mol –1 and ΔS ‡ = –28.5 ± 5 cal·mol –1 ·K –1 for 1 Ph and ΔH ‡ = 22.7 ± 2.5 kcal·mol –1 and ΔS ‡ = –12.4 ± 6 cal·mol –1 ·K –1 for 1 Cy . Addition of O 2 , CO 2 , N 2 O, or PPh 3 to sealed tube NMR experiments did not alter in a detectable way the rate or product distribution of the reactions. Computational DFT studies of elimination of hyponitrite from trans-Me 3 Sn-O-N=N-O-SnMe 3 ( 1 Me ) yield a mechanism involving initial migration of the R 3 Sn group from O to N passing through a marginally stable intermediate product and subsequent N 2 O elimination. Reactions of 1 Ph with protic acids HX are rapid and lead to formation of R 3 SnX and trans-H 2 N 2 O 2 . Reaction of 1 Ph with the metal radical •Cr(CO) 3 C 5 Me 5 at low concentrations results in rapid evolution of N 2 O. At higher •Cr(CO) 3 C 5 Me 5 concentrations, evolution of CO 2 rather than N 2 O is observed. Addition of 1 atm or less CO 2 to benzene or toluene solutions of 2 Ph and 2 Cy resulted in very rapid reaction to form the corresponding carbonates R 3 Sn-O-C(=O)-O-SnR 3 (R = Ph ( 3 Ph ) and R = Cy ( 3 Cy )) at room temperature. Evacuation results in fast loss of bound CO 2 and regeneration of 2 Ph and 2 Cy . Variable temperature data for formation of 3 Cy yield ΔH o = –8.7 ± 0.6 kcal·mol –1 , ΔS o = –17.1 ± 2.0 cal·mol –1 ·K –1 , and ΔG o 298K = –3.6 ± 1.2 kcal·mol –1 . Furthermore, DFT studies were performed and provide additional insight into the energetics and mechanisms for the reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

In Situ Studies of Methanol Decomposition Over Cu(111) and Cu2O/Cu(111): Effects of Reactant Pressure, Surface Morphology, and Hot Spots of Active Sites

The dissociative adsorption of methanol was investigated on Cu(111) and ultrathin Cu 2 O films. We employed synchrotron-based Ambient Pressure X-ray Photoelectron Spectroscopy (AP-XPS) and Scanning Tunneling Microscopy (STM) to study the dynamics of gas–solid interactions, and calculations based on Density Functional Theory (DFT) were used to examine the reaction path. C 1s XPS spectra revealed that methanol underwent dissociative adsorption on plain Cu(111) to form methoxy (CH 3 O), formaldehyde (H 2 CO), and formate (HCOO) at a pressure range of 0.5–10 mTorr, with these species remaining on the surface after evacuation. This was accompanied by the appearance of a low coverage (~0.05 ML) of O ads in the O 1s which can be considered a highly active site for methanol activation. The high activity is apparent by a coverage of 0.8 ML of methoxy at room temperature. STM was unable to image these species at room temperature as they were highly mobile on metallic copper. In contrast, for CH 3 OH on Cu 2 O/Cu(111), STM showed clear hot spots for reaction and a complex array of adsorption structures. On the oxide substrate, there was decomposition of methanol to H 2 CO, CH 3 O, HCOO, and hydrocarbon species (CH x ) due to the subsequent interactions of methanol with lattice oxygen. Cu(111) remained entirely saturated with decomposition products under 10 mTorr of methanol (θ ≈ 0.97 ML), whereas the Cu 2 O overlayer was saturated at a much lower coverage (θ ≈ 0.30 ML). STM revealed rows and step edges of Cu 2 O decorated with decomposition products and metallic Cu islands ~5 nm in size. The difference in activity between Cu(111) and Cu 2 O/Cu(111) is attributed to the significant amount of O present on the oxide surface. Additionally, Density Functional theory (DFT) calculations described the XPS measurements well, showing a likely methanol dissociation to *CH 3 O and therefore a surface reduction. More importantly, the DFT results revealed that it was the chemisorbed oxygen on Cu 2 O/Cu(111) which oxidized the dissociated *CH 3 O to *HCOO and eventually CO 2 , while the reaction only involving upper oxygen on the Cu 2 O hexagonal ring led to the formation of H 2 CO.

36 MATERIALS SCIENCE↗
DOE OSTI2021

NO 2 Interactions with MoO 3 and CuO at Atmospherically Relevant Pressures

NO x concentrations in some geographic regions are harmful to human health. Gas filters to trap NO x and other toxic chemicals contain metal oxides, including MoO 3 and CuO. These materials are also being investigated for NO x gas sensors. In a step to understand the fundamental adsorption mechanism in sensors and the effect on binding site availability in gas filters, ambient-pressure X-ray photoelectron spectroscopy (APXPS) was used to study the interaction of NO 2 with polycrystalline MoO 3 and CuO surfaces under pressures up to 0.01 Torr (14 parts per million volume (ppmv)). Density functional theory-based computational modeling was performed to reveal the mechanisms of NO 2 interactions with the MoO 3 (010) and CuO(111) surfaces to aid interpretation of the experimental results. With pressure dependence, NO 2 interacts with reduced Mo 5+ atoms generated by oxygen vacancies and abstracts hydrogen atoms from hydroxyl groups on MoO 3 without accumulating N-containing species on the surface; vacancy-induced electronic states in the band gap are also removed, hinting toward an increase in the resistivity of the material. N-containing species begin accumulating on the CuO surface at atmospherically relevant pressures of 140 ppbv. NO 2 only decomposes at oxygen vacancy sites of CuO. The nitrogen species leave the CuO surface upon evacuation, highlighting the importance of in situ surface characterization when studying gas sensing and adsorption mechanisms. Finally, these results imply that NO 2 removes hydroxyl and O vac binding sties on these materials when used in gas filtration and sensing applications. Furthermore, the results show the key role of O vac sites in the gas sensing mechanism of MoO 3 and highlight the potential of APXPS for further studies of gas sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Competitive Sorption of H 2 O and CO 2 in Clay Mineral Interlayers

The first-reported competitive CO 2 –H 2 O sorption isotherms on a naturally occurring expandable clay mineral (saponite) exchanged with Na, K, and Cs at near ambient CO 2 concentrations (1% CO 2 ) are reported by combining ATR-FTIR spectroscopy with gravimetric sorption methods. Little CO 2 sorption was observed at high relative humidity (RH) but increased significantly at low RH. Unlike prior work where CO 2 sorption was reported on samples that were previously subjected to heating and/or evacuation treatment to remove sorbed H 2 O, this study manipulated CO 2 sorption by controlling RH. CO 2 sorption increased in the order Cs- > K- > Na-exchanged saponite and was anticorrelated with the Gibbs energy of hydration of the exchangeable cation. As expected, H 2 O sorption followed the opposite trend, with increased H 2 O sorption occurring in the order Na > K > Cs. The amount of CO 2 sorbed using 1 atm CO 2 (p/p o = 1.0) ranged from 50 to 30 mg CO 2 /g clay and from 1.25 to 0.8 mg CO2 /g clay for 1% CO 2 (p/p o = 0.01) in N 2 . The sensitivity of the ATR-FTIR measurements is demonstrated by detecting the CO 2 stretch of adsorbed CO 2 from air containing 500 ppmv CO 2 . The spectral features of sorbed CO 2 were minimally affected by the nature of the exchangeable cation or variations in H 2 O content. However, the position of the HOH bending band shifted significantly from 1638 to 1610 cm –1 as H 2 O content decreased, reflecting changes in intermolecular hydrogen bonding between H 2 O molecules in the saponite interlayer. The shift in position of the HOH bending band to lower energy was coincident with increased CO 2 sorption. CO 2 sorption in clay mineral interlayers is consistent with sorption on weakly hydrated partially hydrophobic sites found on low charge density smectites and is enhanced by lower RH and by the presence of weakly hydrated exchangeable cations like Cs + or K + . In conclusion, the greatest CO 2 sorption occurs on Cs-saponite because this is the least hydrated cation of the three used in the study and indicates that CO2 sorption occurs on the neutral portion of the siloxane surface.

Johnston, Cliff T. [Purdue Univ., West Lafayette, ↗
DOE OSTI2025

MgO Nanostructures on Au(111) as Catalysts for Low-Temperature Methane Activation and C-C Coupling

The selective conversion of methane (CH4) under mild conditions remains challenging due to strong C-H bonds and catalyst coking. We systematically investigated sub-monolayer MgO nanostructures on Au(111), where two-dimensional (2D) MgO islands with stable Mg-O-Au interfaces catalyze low-temperature CH4 activation and C-C coupling. Upon CH4 exposure at 300 K, surface-bound CHx and C2Hx intermediates formed and persisted post-evacuation, indicating robust CHx-O-Mg linkages. Temperature-programmed studies revealed that C-H activation and C-C coupling intensify with heat: the CHx signal grew continuously while the C2Hx signal reached a plateau at 400-500 K. O 1s and Mg 2p attenuation confirmed adsorption of the hydrocarbons on MgO. Catalytic tests at 500 K yielded C2H6 (70%) and C2H4 (30%) without coking, underscoring MgO's role as an active catalyst. These results offer new design principles for developing coke-resistant and low-temperature methane upgrading catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

CO 2 Hydrogenation on Pd(111): The Role of Subsurface Hydrogen and Surface Defects

Palladium-based catalysts are often used in carbon dioxide (CO 2 ) hydrogenation reactions with different possible reaction pathways producing methanol, methane, formic acid, or carbon monoxide. We used ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to understand the surface reaction mechanism of CO 2 hydrogenation on Pd(111). AP-XPS results show that the order in which the reactants are introduced yields different initial surface species. In a CO 2 and H 2 mixture, carbonaceous species (CH x , C*, PdC x ) are formed upon heating Pd(111) at 400 K and above. In addition, a Pd(111) sample pre-exposed to an elevated pressure of H 2 followed by evacuation to ultrahigh vacuum (UHV) can store enough hydrogen atoms in the subsurface and bulk to provide a hydrogen source for the CO 2 hydrogenation reaction to occur when exposed to CO 2 gas alone. In conclusion, the formation of carbonaceous species likely occurs through the decomposition of a transient CH x O intermediate facilitated by low-coordinated sites and surface defects.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Trailblazing Kr/Xe Separation: The Birth of the First Kr-Selective Material

Efficient separation of Kr from Kr/Xe mixtures is pivotal in nuclear waste management and dark matter research. Thus far, scientists have encountered a formidable challenge: the absence of a material with the ability to selectively adsorb Kr over Xe at room temperature. This study presents a groundbreaking transformation of the renowned metal–organic framework (MOF) CuBTC, previously acknowledged for its Xe adsorption affinity, into an unparalleled Kr-selective adsorbent. This achievement stems from an innovative densification approach involving systematic compression of the MOF, where the crystal size, interparticle interaction, defects, and evacuation conditions are synergistically modulated. The resultant densified CuBTC phase exhibits exceptional mechanical resilience, radiation tolerance, and notably an unprecedented selectivity for Kr over Xe at room temperature. Simulation and experimental kinetic diffusion studies confirm reduced gas diffusion in the densified MOF, attributed to its small pore window and minimal interparticle voids. The lighter Kr element demonstrates facile surface passage and higher diffusivity within the material, while the heavier Xe encounters increased difficulty entering the material and lower diffusivity. This Kr-selective MOF not only represents a significant breakthrough in Kr separation but also demonstrates remarkable processability and scalability to kilogram levels. Furthermore, the findings presented herein underscore the transformative potential of engineered MOFs in addressing complex challenges, heralding a new era of Kr separation technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Influence of 1-Butene Adsorption on the Dimerization Activity of Single Metal Cations on UiO-66 Nodes

Grafting metal cations to missing linker defect sites in zirconium-based metal–organic frameworks, such as UiO-66, produces a uniquely well-defined and homotopic catalytically active site. We present here the synthesis and characterization of a group of UiO-66-supported metal catalysts, M-UiO-66 (M = Ni, Co, Cu, and Cr), for the catalytic dimerization of alkenes. The hydrogen–deuterium exchange via deuterium oxide adsorption followed by infrared spectroscopy showed that the last molecular water ligand desorbs from the sites after evacuation at 300 °C leading to M(OH)-UiO-66 structures. Adsorption of 1-butene is studied using calorimetry and density functional theory techniques to characterize the interactions of the alkene with metal cation sites that are found active for alkene oligomerization. For the most active Ni-UiO-66, the removal of molecular water from the active site significantly increases the 1-butene adsorption enthalpy and almost doubles the catalytic activity for 1-butene dimerization in comparison to the presence of water ligands. Other M-UiO-66 (M = Co, Cu, and Cr) exhibit 1–3 orders of magnitude lower catalytic activities compared to Ni-UiO-66. The catalytic activities correlate linearly with the Gibbs free energy of 1-butene adsorption. Furthermore, density functional theory calculations probing the Cossee–Arlman mechanism for all metals support the differences in activity, providing a molecular level understanding of the metal site as the active center for 1-butene dimerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Isolation of a Terminal Cobalt Nitride in a Metal–Organic Framework

Transition metal nitrides are reactive intermediates in biological and industrial processes. Chemists have synthesized molecular model complexes of such reactive species to understand their function and electronic requirements for new applications. However, molecular chemistry can suffer from intra- and intermolecular decomposition pathways, which preclude further discovery of unknown reactive species. Metal-organic frameworks offer an opportunity for creating long-lived forms of such species with the vacuum of the pore suppressing degradation while simultaneously enabling substrate access for controlled reactivity studies. Here, in this study, we report the characterization of an elusive terminal cobalt nitride species generated through photolysis or thermolysis of a site-isolated cobalt azide within the evacuated metal-organic framework CoN 3 -MFU-4l. The first crystal structure of such a species is presented, with vibrational, X-ray absorption, and electron paramagnetic resonance spectroscopies providing further direct evidence for its formation while elucidating its electronic structure. The system additionally enables subsequent reactivity studies with selected substrates, revealing a unique ambiphilic behavior for a metal nitride species.

Börgel, Jonas [University of California, Berkeley,↗
DOE OSTI2023

Reversible transformations between the non-porous phases of a flexible coordination network enabled by transient porosity

Abstract Flexible metal–organic materials that exhibit stimulus-responsive switching between closed (non-porous) and open (porous) structures induced by gas molecules are of potential utility in gas storage and separation. Such behaviour is currently limited to a few dozen physisorbents that typically switch through a breathing mechanism requiring structural contortions. Here we show a clathrate (non-porous) coordination network that undergoes gas-induced switching between multiple non-porous phases through transient porosity, which involves the diffusion of guests between discrete voids through intra-network distortions. This material is synthesized as a clathrate phase with solvent-filled cavities; evacuation affords a single-crystal to single-crystal transformation to a phase with smaller cavities. At 298 K, carbon dioxide, acetylene, ethylene and ethane induce reversible switching between guest-free and gas-loaded clathrate phases. For carbon dioxide and acetylene at cryogenic temperatures, phases showing progressively higher loadings were observed and characterized using in situ X-ray diffraction, and the mechanism of diffusion was computationally elucidated.

Chemistry↗
DOE OSTI2022

Incorporation of free halide ions stabilizes metal–organic frameworks (MOFs) against pore collapse and renders large-pore Zr-MOFs functional for water harvesting

Chemically and hydrolytically stable MOFs have shown promising water-vapor adsorption properties. However, MOFs that can simultaneously satisfy the following three requirements for effective water harvesting from low-humidity air are quite rare: (1) high water-uptake capacity; (2) hydrolytic and mechanical stability; (3) complete uptake at ~20–30% relative humidity (RH). Here we show that incorporating free halide ions is effective for enabling a representative Zr-MOF to meet these requirements for water harvesting. As-synthesized MOF-808 initially exhibits very good capacity at RH ≥ 30%, but quickly suffers large capacity losses due to water-evacuation-induced pore collapse. Via a framework-charging and free counter-ion inclusion approach, we were able to replace node-ligated formate anions with charge-neutral aqua ligands and site desired water-sorbing free-halide ions within the large pores of MOF-808 . In this study, altered samples show increased gravimetric water uptake, show beneficial shifts of water sorption isotherms toward lower water-vapor partial pressure, eliminate undesirable sorption/desorption isotherm hysteresis, and render MOF-808-Br indefinitely recyclable for ambient-temperature uptake of water vapor and lower-temperature liquid-water release.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthesis and structural properties of a 2D Zn( II ) dodecahydroxy- closo -dodecaborate coordination polymer

Here, in this work, we discuss the synthesis and characterization of a 2D coordination polymer composed of a dianionic perhydroxylated boron cluster, [B 12 (OH) 12 2– ], coordinated to Zn( II )—the first example of a transition metal-coordinated [B 12 (OH) 12 ] 2– compound. This material was synthesized via cation exchange from the starting cesium salt and then subjected to rigorous characterization prior to and after thermal activation. Numerous techniques, including XRD, FTIR, SEM, TGA, and solid-state NMR revealed a 2D coordination polymer composed of sheets of Zn( II ) ions intercalated between planes of boron clusters. The as-synthesized material was then evacuated of solvent via thermal treatment, and atomic-level changes from this transformation were elucidated through a combination of 1D and 2D solid-state NMR analyses of 11 B and 1 H nuclei, suggesting the full removal of coordinated solvent molecules. Evidence also suggested that [B 12 (OH) 12 2– ] can adjust its coordination to Zn( II ) in the solid-state through hemilability of its numerous –OH ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Insights into dual-functional modification for water stability enhancement of mesoporous zirconium metal–organic frameworks

The stability of metal–organic frameworks (MOFs) in water affects their ability to function as chemical catalysts, their capacity as adsorbents for separations in water vapor presence, and their usefulness as recyclable water harvesters. Here, we have examined water stability of four node-modified variants of the mesoporous MOF, NU-1000, namely formate-, Acac-, TFacac-, and Facac-NU-1000, comparing these with node-accessible NU-1000. These NU-1000 variants present ligands grafted to NU-1000's hexa-Zr(IV)-oxy nodes by displacing terminal aqua and hydroxo ligands. Facac-NU-1000, containing the most hydrophobic ligands, showed the greatest water stability, being able to undergo at least 20 water adsorption/desorption cycles without loss of water uptake capacity. Computational studies revealed dual salutary functions of installed Facac ligands: (1) enhancement of framework mechanical stability due to electrostatic interactions; and (2) transformation and shielding of the otherwise highly hydrophilic nodes from H-bonding interactions with free water, presumably leading to weaker channel-stressing capillary forces during water evacuation – consistent with trends in free energies of dehydration across the NU-1000 variants. Water harvesting and hydrolysis of chemical warfare agent simulants were examined to gauge the functional consequences of modification and mechanical stabilization of NU-1000 by Facac ligands. The studies revealed a harvesting capacity of ~1.1 L of water vapor per gram of Facac-NU-1000 per sorption cycle. They also revealed retention of catalytic MOF activity following 20 water uptake and release cycles. This study provides insights into the basis for node-ligand-engendered stabilization of wide-channel MOFs against collapse during water removal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Presentation of gas-phase-reactant-accessible single-rhodium-atom catalysts for CO oxidation, via MOF confinement of an Anderson polyoxometalate

Geometric or electronic confinement of guests within nanoporous hosts holds promise for imparting catalytic functionality, including single-metal-atom catalytic functionality, to existing materials. When the nanoporous host is a metal–organic framework (MOF), single-metal-ion catalysts have typically been installed by grafting to an open site on an inorganic node, with the node effectively becoming the support for the catalyst. This approach, however, imposes compositional constraints, as the node not only needs to be receptive to grafting, but also must be capable of stabilizing the framework against solvent evacuation, chemical exposure, and heating. Here, we show that disk-like, Anderson polyoxometalate clusters (RhMo 6 O 24 n- and Mo 7 O 24 m- ; POMs) can be confined in pore-specific and orientation-specific fashion within the hierarchically porous, Zr(IV)-based MOF, NU1K. Self-limiting loading of one cluster per pore, and associated nano-confinement, serve to isolate each POM and prevent consolidation caused by sintering. Additionally, the oriented confinement serves to expose individual rhodium atoms to candidate gas-phase reactants, while enabling the rhodium atom to employ a well-defined oxy-molybdenum cluster, rather than a MOF node, as a support. Synchrotron-based difference-electron-density maps and differential pair-distribution-function analyses of scattered X-rays establish cluster siting and orientation and confirm isolation. Nanoconfined (i.e., MOF- and POM-confined) single-rhodium(III)-atoms are catalytically competent for an illustrative gas-phase reaction, CO oxidation by O 2 , with the MOF-isolated POM enormously outperforming nonporous, MOF-free, solid (NH 4 ) 3 [H 6 RhMo 6 O 24 ]·6H 2 O. This paper highlights the value of MOF-based nano-confinement and oriented isolation of planar POMs as a means of uniformly presenting and stabilizing potent single-metal-atom catalysts, in reactant-accessible form, on well-defined supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Alternate InP synthesis with aminophosphines: solution–liquid–solid nanowire growth

Indium phosphide nanowires are important components in high-speed electronics and optoelectronics, including photodetectors and photovoltaics. However, most syntheses either use high-temperature and costly vapor-phase methodology or highly toxic and pyrophoric tris(trimethylsilyl)phosphine. To expand on the success of the aminophosphine-based InP colloidal quantum dot synthesis, we developed a synthesis for thin (~11 nm) zinc blende InP nanowires at 180 °C using indium tris(trifluoroacetate) and tris(diethylamino)phosphine. A flat nanoribbon morphology was identified by transmission electron and atomic force microscopy analysis, with the stoichiometric (110) lattice plane exposed. Nanowire growth proceeded through a solution–liquid–solid mechanism from in situ-formed indium metal nanoparticles. Molecular byproducts of tris(oleylamino)phosphine oxide and N-oleyltrifluoroacetamide observed by 31 P and 19 F NMR spectroscopy inform a proposed mechanism of indium reduction by the aminophosphine. Morphological control over the nanowire product was achieved by varying the phosphorus injection to control the aspect ratio, the In : P ratio to toggle between nanowires and multipods, and the pre-hot injection evacuation step to favor a quantum dot product. Furthermore, replacing the indium precursor with indium tris(trifluoromethanesulfonate) was found to make bulk zinc blende InP nanowires with an average diameter of >250 nm and tens of microns in length.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Electric field measurements of DC-driven positive streamer coronas using the E-FISH method

This paper reports on electric field measurements, using the electric field-induced second harmonic (E-FISH) method, sampling the spatial structure and temporal development of DC-driven positive streamer coronas in atmospheric-pressure air at relevant timescales to examine the self-pulsating behavior of the discharge. The discharge is triggered from a point-to-plate geometry and consists of transient coronas, which bridge the inter-electrode gap and pulsate at about 3 kHz, superimposed with a persisting glow corona. The measurements presented challenge the phenomenological explanation for the pulsations based on field recovery at the anode driven by the evacuation of positive ions by electric drift effects and hint at a propagating wave-like feature from the plate-cathode to the tip-anode.

42 ENGINEERING↗
DOE OSTI2024

Optimization of a Lethal, Combat-Relevant Model of Sterile Inflammation in Mice for Drug Candidate Screening

ABSTRACT Introduction Extensive trauma, commonly seen in wounded military Service Members, often leads to a severe sterile inflammation termed systemic inflammatory response syndrome (SIRS), which can progress to multiple organ dysfunction syndrome (MODS) and death. MODS is a serious threat to wounded Service Members, historically causing 10% of all deaths in trauma admissions at a forward deployed combat hospital. The importance of this problem will be exacerbated in large-scale combat operations, in which evacuation will be delayed and care of complex injuries at lower echelons of care may be prolonged. The main goal of this study was to optimize an existing mouse model of lethal SIRS/MODS as a therapeutic screening platform for the evaluation of immunomodulatory drugs. Materials and Methods Male C57BL/6 mice were euthanized, and the bones and muscles were collected and blended into a paste termed tissue–bone matrix (TBX). The TBX at 12.5%–20% relative to body weight of each recipient mouse was implanted into subcutaneous pouches created on the dorsum of anesthetized animals. Mice were observed for clinical scores for up to 48 hours postimplantation and euthanized at the preset point of moribundity. To test effects of anesthetics on TBX-induced mortality, animals received isoflurane or ketamine/xylazine (K/X). In a separate set of studies, mice received TBX followed by intraperitoneal injection with 20 mg/kg or 40 mg/kg Eritoran or a placebo carrier. All Eritoran studies were performed in a blinded fashion. Results We observed that K/X anesthesia significantly increased the lethality of the implanted TBX in comparison to inhaled anesthetics. Although all the mice anesthetized with isoflurane and implanted with 12.5% TBX survived for 24 hours, 60% of mice anesthetized with K/X were moribund by 24 hours postimplantation. To mimic more closely the timing of lethal SIRS/MODS following polytrauma in human patients, we extended observation to 48 hours. We performed TBX dose–response studies and found that as low as 15%, 17.5%, and 20% TBX caused moribundity/mortality in 50%, 80%, and 100% mice, respectively, over a 48-hour time period. With 17.5% TBX, we tested if moribundity/mortality could be rescued by anti-inflammatory drug Eritoran, a toll-like receptor 4 antagonist. Neither 20 mg/kg nor 40 mg/kg doses of Eritoran were found to be effective in this model. Conclusions We optimized a TBX mouse model of SIRS/MODS for the purpose of evaluating novel therapeutic interventions to prevent trauma-related pathophysiologies in wounded Service Members. Negative effects of K/X on lethality of TBX should be further evaluated, particularly in the light of widespread use of ketamine in treatment of pain. By mimicking muscle crush, bone fracture, and necrosis, the TBX model has pleiotropic effects on physiology and immunology that make it uniquely valuable as a screening tool for the evaluation of novel therapeutics against trauma-induced SIRS/MODS.

General & Internal Medicine↗
DOE OSTI2023

A striking relationship between dust extinction and radio detection in DESI QSOs: evidence for a dusty blow-out phase in red QSOs

ABSTRACT We present the first eight months of data from our secondary target programme within the ongoing Dark Energy Spectroscopic Instrument (DESI) survey. Our programme uses a mid-infrared and optical colour selection to preferentially target dust-reddened quasi-stellar objects (QSOs) that would have otherwise been missed by the nominal DESI QSO selection. So far, we have obtained optical spectra for 3038 candidates, of which ∼70 per cent of the high-quality objects (those with robust redshifts) are visually confirmed to be Type 1 QSOs, consistent with the expected fraction from the main DESI QSO survey. By fitting a dust-reddened blue QSO composite to the QSO spectra, we find they are well-fitted by a normal QSO with up to AV ∼ 4 mag of line-of-sight dust extinction. Utilizing radio data from the LOFAR Two-metre Sky Survey (LoTSS) DR2, we identify a striking positive relationship between the amount of line-of-sight dust extinction towards a QSO and the radio detection fraction, that is not driven by radio-loud systems, redshift and/or luminosity effects. This demonstrates an intrinsic connection between dust reddening and the production of radio emission in QSOs, whereby the radio emission is most likely due to low-powered jets or winds/outflows causing shocks in a dusty environment. On the basis of this evidence, we suggest that red QSOs may represent a transitional ‘blow-out’ phase in the evolution of QSOs, where winds and outflows evacuate the dust and gas to reveal an unobscured blue QSO.

79 ASTRONOMY AND ASTROPHYSICS↗