Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diversity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Comparison of the Microbial Diversity and Abundance Between the Freshwater Land-Locked Lakes of Schirmacher Oasis and the Perennially Ice-Covered Lake Untersee in East Antarctica

Extreme conditions such as low temperature, dryness, and constant UV-radiation in terrestrial Antarctica are limiting factors of the survival of microbial populations. The objective of this study was to investigate the microbial diversity and enumeration between the open water lakes of Schirmacher Oasis and the permanently ice-covered Lake Untersee. The lakes in Schirmacher Oasis possessed abundant and diverse group of microorganisms compared to the Lake Untersee. Furthermore, the microbial diversity between two lakes in Schirmacher Oasis (Lake L27C and L47) was compared by culture-based molecular approach. It was determined that L27Chad a richer microbial diversity representing 5 different phyla and 7 different genera. In contrast L47 consisted of 4 different phyla and 6 different genera. The difference in microbial community could be due to the wide range of pH between L27C (pH 9.1) and L47 (pH 5.7). Most of the microbes isolated from these lakes consisted of adaptive biological pigmentation. Characterization of the microbial community found in the freshwater lakes of East Antarctica is important because it gives a further glimpse into the adaptation and survival strategies found in extreme conditions.

Huang, Jonathan↗

Comet Dust: The Diversity of "Primitive" Particles and Implications

Comet dust is primitive and shows significant diversity. Our knowledge of the properties of primitive particles has expanded significantly through microscale investigations of cosmic dust samples ( IDP's(Interplanetary Dust Particles) and AMM's (Antarctic Micrometeorites)) and of comet dust samples (Stardust and Rosetta's COSIMA), as well as through remote sensing (spectroscopy and imaging) via Spitzer and via spacecraft encounters with 103P/Hartley 2 and 67P/Churyumov-Gerasimenko. Microscale investigations show that comet dust and cosmic dust are particles of unequilibrated materials, including aggregates of materials unequilibrated at submicron scales. We call unequilibrated materials "primitive" and we deduce they were incorporated into ice-rich (H2O-, CO2-, and CO-ice) parent bodies that remained cold, i.e., into comets, because of the lack of aqueous or thermal alteration since particle aggregation; yet some Stardust olivines suggest mild thermal metamorphism. Primitive particles exhibit a diverse range of: structure and typology; size and size distribution of constituents; concentration and form of carbonaceous and organic matter; D-, N-, and O- isotopic enhancements over solar; Mg-, Fe-contents of the silicate minerals; the compositions and concentrations of sulfides, and of less abundant mineral species such as chondrules, CAIs and carbonates. The uniformity within a group of samples points to: aerodynamic sorting of particles and/or particle constituents; the inclusion of a limited range of oxygen fugacities; the inclusion or exclusion of chondrules; a selection of organics. The properties of primitive particles imply there were disk processes that resulted in different comets having particular selections of primitive materials. The diversity of primitive particles has implications for the diversity of materials in the protoplanetary disk present at the time and in the region where the comets formed.

Wooden, Diane H.↗

Braving Diversity

In 2020, staff at the Lunar and Planetary Institute (LPI) initiated discussions on diversity and inclusion topicssuch as microaggressions, power imbalances, and personal identity, with the goal of nurturing and sustaining an inclusive workplace climate. Authors Shupla, Filiberto, Rivera-Valentín, and Svambera determined that rather than conducting a single workshop, holding a series of seminars that they titled “Braving Diversity” on assorted topics would be more meaningful. These seminar and discussion sessions are intentionally designed to supplement, not replace, traditional trainings and workshops on unconscious bias, bystander intervention, harassment, and other topics.Braving Diversity is a series of LPI staff discussions, coordinated by and open to all staff on the challenges related to maintaining an inclusive and accessible environment. The vision is to hold these hour-long sessions, which include current research on diversity and inclusion and facilitated dialogue, several times each year.

C. Shupla↗

Hydraulic Diversity of Forests Regulates Ecosystem Resilience During Drought

Plants influence the atmosphere through fluxes of carbon, water and energy, and can intensify drought through land–atmosphere feedback effects. The diversity of plant functional traits in forests, especially physiological traits related to water (hydraulic) transport, may have a critical role in land–atmosphere feedback, particularly during drought. Here we combine 352 site-years of eddy covariance measurements from 40 forest sites, remote-sensing observations of plant water content and plant functional-trait data to test whether the diversity in plant traits affects the response of the ecosystem to drought. We find evidence that higher hydraulic diversity buffers variation in ecosystem flux during dry periods across temperate and boreal forests. Hydraulic traits were the predominant significant predictors of cross-site patterns in drought response. By contrast, standard leaf and wood traits, such as specific leaf area and wood density, had little explanatory power. Our results demonstrate that diversity in the hydraulic traits of trees mediates ecosystem resilience to drought and is likely to have an important role in future ecosystem–atmosphere feedback effects in a changing climate.

Climate and Earth system modelling↗

Diversity and Inclusion in Spacecraft Science Teams: What Do We Know and What Can We Do About It?

Introduction: Not only does the planetary science community lack diversity [1-3], the subset of the community that participates on spacecraft science team is even less diverse than the community as a whole [1, 4]. Results of 2020 Workforce Survey: Previous studies of the diversity of members of spacecraft science teams made incorrect assumptions about the nature of the data before collecting the data. Those analyses assumed a binary gender and ignored the existence of planetary scientists who are neither men nor women [4-6]. We present here results where demographic data was collected without assumptions; each individual surveyed supplied their own answers to demographic questions. The April 2020 survey of Planetary Scientists, which was conducted by the Statistical Research Center of the American Institute of Physics (AIP) and funded by the American Astronomical Society (AAS)’s Division of Planetary Science (DPS) asked participants their gender with 4 possible responses: Woman, Man, Another identify (please specify if you wish), and Prefer not to answer. 32% of respondents chose Woman, 67% chose Man and 1% chose Another gender identity [1]. The survey also asked demographic questions on race, ethnicity, LGBTQ+ identity, and disability. For a full list of questions, see https://dps.aas.org/sites/dps.aas.org/files/reports/2020/survey2020_questionnaire.pdf. In addition to demographic questions, the 2020 Workforce survey asked how many times respondents had been involved in Mission proposals as a Principal Investigator (PI) and, separately, as a Co-Investigator (CoI) [1]. Answers to questions about mission involvement were correlated with answers to demographic questions and the results show that members of historically underrepresented groups (non-white scientists, women, members of the LGBTQ+ community, and disabled scientists) were less likely to be involved in spacecraft mission proposals than were members of historically overrepresented groups [1]. The figures below show the correlated responses for four different axes of underrepresentation [1]. Note that while the figure on gender shows only Women and Men (due to the small percentage of folks answering “Another gender”), non-binary respondents are included in the LGBTQ+ community figure. Conclusion: Being part of a spacecraft science team is a goal for many planetary scientists. With it comes brand new data, more stable funding, and a sense of awe and exploration. It can lead to a cascade of opportunities from conference and public presentations, to membership in subsequent mission teams, and prestige in the community [4]. As a result, participation in spacecraft teams can be used a measure of success within the field. From the survey results, we see that members of historically excluded groups, even after they have overcome barriers to participating in the field, are still experiencing barriers to success within the field itself. Why?: The diminishing percentage of members of underrepresented groups as a career progresses has been referred to as a “leaky pipeline”. However, this fails to adequately capture the experiences of the members of these underrepresented groups as it implies a passive process. In order to capture the active processes (bias, discrimination, harassment, and other exclusionary behaviors) that contribute to low retention in the workforce, the term “Hostile Obstacle Course” is more useful [7,8]. It is these processes that need to be addressed in order to retain valued members of our community. Moving Forward: In order to broaden participation in planetary science, particularly mission science teams, we need to address conditions that create hostile workplace climates. What can mission teams and other groups do to address these conditions? First, each group/team needs to evaluate their own members to determine what specific barriers exist in their own interactions. One tool to accomplish this would be an anonymous survey designed to understand how team members feel about working within the group. Working with professionals who know how to create and analyze such surveys (often called “climate surveys” when applied to University students, for example) would ensure that the survey meets its goals and does not make assumptions that counter the meaningfulness of the results. Such professionals in EDIA (Equity, Diversity, Inclusion, and Accessibility) and workplace culture can make suggestions for policy changes that would eliminate hostile workplace conditions. Policy changes that are often suggested include instituting professional EDIA training for the team and/or for team leadership, instituting and following a code of conduct [9], including more interactive group activities in group meetings, etc. Training and information on EDIA is available for all members of the planetary science community. The first place to look would be in your University or Institution’s EDIA or human resources offices. Bystander Intervention is often offered as part of other meetings [10]. A newer offering is a Workshop on EDIA for Leaders in Planetary Science led by Julie Rathbun (first author of this abstract) and JA Grier (https://edialps.psi.edu/). This 3-day workshop gives participants the tools they need to enact positive change in their personal and professional spheres. The first workshop was help in November 2022 and another workshop will take place in the late spring 2023 with exact dates to be announced soon.

J. A. Rathbun↗

A 15.3 GHz satellite-to-ground diversity propagation experiment using a terminal separation of 4 kilometers

The performance of a path diversity satellite-to-ground millimeter wave link with two ground terminals separated by 4 km is discussed. At this separation distance the duration of fades below 6 dB was decreased by at least a factor of 10 when using path diversity and the cumulative crosscorrelation between the attenuations observed at the two terminals during rain events was approximately 0.45. Narrow beam radiometers directed along the propagation paths were also utilized to relate the path radiometric temperature to the path attenuation. An analysis of downlink propagation data for generating diversity link performance statistics is included.

Grimm, K. R.↗

A 15.3 GHz satellite-to-ground diversity experiment utilizing the ATS-5 satellite

During 1970 and 1971 the characteristics of a diversity satellite-to-ground communication link were measured using the ATS-5 15.3 GHz downlink. These data were gathered at two ground receiving terminals spaced 4 km apart during 1970 and 8 km apart during 1971 in the vicinity of Columbus, Ohio. These data have been subsequently analyzed to determine the improvement in link performance resulting from the use of space diversity. The results of this analysis have shown that substantial improvements in link performance may be gained through the use of space diversity on satellite-to-ground paths. For example, the durations of fades having depths exceeding 10 dB were reduced by more than two orders of magnitude for both the 4 and 8 km site separation distances.

Hodge, D. B.↗

A 15.3 GHz satellite-to-ground path-diversity experiment utilizing the ATS-5 satellite

During several months in 1970 and 1971, the characteristics of a diversity satellite-to-ground communication link were measured using the ATS-5 15.3 GHz downlink. These data were gathered at two ground receiving terminals spaced 4 km apart during 1970 and 8 km apart during 1971 in the vicinity of Columbus, Ohio. These data have subsequently been analyzed to determine the improvement in link performance resulting from the use of space diversity. The results of this analysis have shown that substantial improvements in link performance may be gained through the use of space diversity on satellite-to-ground paths. For example, the durations of fades having depths exceeding 10 dB were reduced by more than two order of magnitude for both the 4 and 8 km site separation distances.

Hodge, D. B.↗

Space diversity performance prediction for earth-satellite paths using radar modeling techniques

Space diversity performance is examined on the basis of radar modeling techniques. Radar-derived joint probability distributions are calculated for determining path attenuation and statistical formulation. The computational aspects of the model are discussed in terms of the data base, determining path length and converting statistics to other path angles. The results are presented in terms of prediction accuracy, predicted joint probability distributions, diversity gain, and the autocorrection function. When compared to other models, this model's rain-derived relative diversity gain shows good agreement.

Goldhirsh, J.↗

Strategies for FH/MFSK signaling with diversity in worst-case partial-band noise

Optimum diversity and worst-case partial-band noise jamming conditions have been derived for noncoherent energy detection of frequency-hopped (FH) M-ary frequency-shift keyed (MFSK) signals using a soft-chip decision suboptimum linear combining metric with perfect jamming-state side information. However, the assumption implicit in previous publications is that the error is first maximized over the jammer's partial-band duty factor for arbitrary diversity, and the result is then minimized over the amount of diversity. This paper shows that if the order of optimization is reversed, different conditions and performance are produced; that is, the previous solution is not a saddlepoint. This introduces some game-theoretic considerations for the communicator and the jammer, the risks and advantages of which are explored.

Levitt, B. K.↗

Conceptual test of frequency diversity lidar

The present consideration of the estimation accuracy of lidar-backscattered signals in atmospheric remote sensing proposes a method that can furnish additional uncorrelated data within the atmospheric decorrelation time, with enhanced energy efficiency. This frequency-diversity method recognizes that additional uncorrelated data from a given illuminated region is obtainable by changing the frequency of the incoming radiation. The mathematical analysis of the frequency-diversity concept by Wallace (1953) confirms the physical scenario employed. A simple version of a coherent lidar system incorporating the frequency-diversity concept is included to illustrate the design principles involved.

Schotland, Richard M.↗

Data diversity: An approach to software fault tolerance

Data diversity is described, and the results of a pilot study are presented. The regions of the input space that cause failure for certain experimental programs are discussed, and data reexpression, the way in which alternate input data sets can be obtained, is examined. A description is given of the retry block which is the data-diverse equivalent of the recovery block, and a model of the retry block, together with some empirical results is presented. N-copy programming which is the data-diverse equivalent of N-version programming is considered, and a simple model and some empirical results are also given.

Ammann, Paul E.↗

Image understanding and interpretation in microwave diversity imaging

The authors investigate microwave imaging of metallic objects using a diversity method and interpret and predict the reconstructed image from an approach based on analysis of the scattering mechanism and a back-projection algorithm used in image retrieval. The connection between the various scattering mechanisms and the reconstructed images is discussed, what the images represent is interpreted, and a prediction is made as to what the image will look like over given spectral and angular windows. A brief description is given of the microwave diversity imaging system and the formulation of the microwave diversity imaging based on the physical optics approximation. The scattering mechanism of a complex shaped metallic object is then briefly reviewed and an alternate approach to interpreting the reconstructed image based on the understanding of the scattering mechanism and the reconstruction algorithm is given. Several numerical and experimental examples are included to support this interpretation approach.

Li, Hsueh-Jyh↗

Soft-decision Viterbi decoding with diversity combining

Diversity combining methods for convolutional coded and soft-decision Viterbi decoded channels in mobile satellite communications systems are evaluated and it is clarified that the pre-Viterbi-decoding maximal ratio combining shows better performance than other methods in Rician fading channels by computer simulation. A novel practical technique for maximal ratio combining is proposed, in which the coefficients for weighting are derived from soft-decision demodulated signals only. The proposed diversity combining method with soft-decision Viterbi decoding requires simple hardware and shows satisfactory performance with slight degradation of 0.3 dB in Rician fading channels compared with an ideal weighting scheme. Furthermore, this diversity method is applied to trellis coded modulation and significant Pe performance improvement is achieved.

Sakai, T.↗

Narrow Angle Diversity using ACTS Ka-band Signal with Two USAT Ground Stations

Two ultra small aperture terminal (USAT) ground stations, separated by 1.2 km in a narrow angle diversity configuration, received a continuous Ka-band tone sent from Cleveland Link Evaluation Terminal (LET). The signal was transmitted to the USAT ground stations via NASA's Advanced Communications Technology Satellite (ACTS) steerable beam. Received signal power at the two sites was measured and analyzed. A dedicated datalogger at each site recorded time-of-tip data from tipping bucket rain gauges, providing rain amount and instantaneous rain rate. WSR-88D data was also obtained for the collection period. Eleven events with ground-to-satellite slant-path precipitation and resultant signal attenuation were observed during the data collection period. Fade magnitude and duration were compared at the two sites and diversity gain was calculated. These results exceeded standard diversity gain model predictions by several decibels. Rain statistics from tipping bucket data and from radar data were also compared to signal attenuation. The nature of Florida's subtropical rainfall, specifically its impact on signal attenuation at the sites, was addressed.

Kalu, A.↗

Limits to randomness in paleobiologic models: the case of Phanerozoic species diversity

The question of how random, or unconstrained, paleobiologic models should be is examined with a case study: Signor's (1982, 1985) inverse calculation of levels of marine species diversity through the Phanerozoic. His calculation involved an ingenious model that estimated species numbers and species abundances in the world oceans of the past by correcting known numbers of fossil species for variations in sedimentary rocks available for sampling and in effort paleontologists might devote to sampling. The model proves robust to changes in possible shapes of species-abundance distributions, but it is sensitive to alterations in the assumption that paleontologists collect fossils at random. If it is assumed that ease of collecting varies with age of sediment (with the Cenozoic offering easy sampling) or that paleontologists tend to seek out rarer fossils, results of the inverse calculation change. In particular, the magnitude of the calculated Cenozoic diversity increase always declines from the factor of about seven as originally reported to something considerably smaller. This leaves open the problem of the magnitude of Cenozoic increase in marine species diversity, awaiting better empirical data and, perhaps, more exacting models, random or otherwise.

Non-NASA Center↗

Biotic transitions in global marine diversity

Long-term transitions in the composition of Earth's marine biota during the Phanerozoic have historically been explained in two different ways. One view is that they were mediated through biotic interactions among organisms played out over geologic time. The other is that mass extinctions transcended any such interactions and governed diversity over the long term by resetting the relative diversities of higher taxa. However, a growing body of evidence suggests that macroevolutionary processes effecting biotic transitions during background times were not fundamentally different from those operating during mass extinctions. Physical perturbations at many geographic scales combined to produce the long-term trajectory of Phanerozoic diversity.

Non-NASA Center↗

Wavefront Sensing With Switched Lenses for Defocus Diversity

In an alternative hardware design for an apparatus used in image-based wavefront sensing, defocus diversity is introduced by means of fixed lenses that are mounted in a filter wheel (see figure) so that they can be alternately switched into a position in front of the focal plane of an electronic camera recording the image formed by the optical system under test. [The terms image-based, wavefront sensing, and defocus diversity are defined in the first of the three immediately preceding articles, Broadband Phase Retrieval for Image-Based Wavefront Sensing (GSC-14899-1).] Each lens in the filter wheel is designed so that the optical effect of placing it at the assigned position is equivalent to the optical effect of translating the camera a specified defocus distance along the optical axis. Heretofore, defocus diversity has been obtained by translating the imaging camera along the optical axis to various defocus positions. Because data must be taken at multiple, accurately measured defocus positions, it is necessary to mount the camera on a precise translation stage that must be calibrated for each defocus position and/or to use an optical encoder for measurement and feedback control of the defocus positions. Additional latency is introduced into the wavefront sensing process as the camera is translated to the various defocus positions. Moreover, if the optical system under test has a large focal length, the required defocus values are large, making it necessary to use a correspondingly bulky translation stage. By eliminating the need for translation of the camera, the alternative design simplifies and accelerates the wavefront-sensing process. This design is cost-effective in that the filterwheel/lens mechanism can be built from commercial catalog components. After initial calibration of the defocus value of each lens, a selected defocus value is introduced by simply rotating the filter wheel to place the corresponding lens in front of the camera. The rotation of the wheel can be automated by use of a motor drive, and further calibration is not necessary. Because a camera-translation stage is no longer needed, the size of the overall apparatus can be correspondingly reduced.

Dean, Bruce H.↗