Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Display Devices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Analysis of hopping conduction in semiconducting and metallic carbon nanotube devices

Single-walled carbon nanotube field-effect transistors were irradiated with 20 keV electrons using an e-beam lithography exposure method. Analysis of conduction data in the temperature range from 25 to 300 K indicated the creation of insulating regions containing traps along the nanotube channel. Further analysis of semiconducting and metallic nanotube devices shows dramatic differences in the effect of the electron exposure on the hopping defect barrier heights. Barriers for metallic nanotubes saturate at significantly larger values than semiconducting nanotubes due to shorter localization lengths. The limited and near constant density of states at the Fermi level induces a larger hopping length to localization length ratio, further limiting current and increasing measured trap heights. Poole-Frenkel hopping with an adjustment for electron localization is utilized to explain the inconsistencies. n-type and p-type barriers in the nanotube devices displayed exponential dependence on applied gate voltage bias, with the peak barrier height in the metallic device defining a switch of majority carrier.

36 MATERIALS SCIENCE↗

Transparent photostable ZnO nonvolatile memory transistor with ferroelectric polymer and sputter-deposited oxide gate

We report on the fabrication of transparent top-gate ZnO nonvolatile memory thin-film transistors (NVM-TFTs) with 200 nm thick poly(vinylidene fluoride/trifluoroethylene) ferroelectric layer; semitransparent 10 nm thin AgO{sub x} and transparent 130 nm thick indium-zinc oxide (IZO) were deposited on the ferroelectric polymer as gate electrode by rf sputtering. Our semitransparent NVM-TFT with AgO{sub x} gate operates under low voltage write-erase (WR-ER) pulse of {+-}20 V, but shows some degradation in retention property. In contrast, our transparent IZO-gated device displays very good retention properties but requires anomalously higher pulse of {+-}70 V for WR and ER states. Both devices stably operated under visible illuminations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomic layer deposition of Al{sub 2}O{sub 3} for single electron transistors utilizing Pt oxidation and reduction

This work describes the fabrication of single electron transistors using electron beam lithography and atomic layer deposition to form nanoscale tunnel transparent junctions of alumina (Al{sub 2}O{sub 3}) on platinum nanowires using either water or ozone as the oxygen precursor and trimethylaluminum as the aluminum precursor. Using room temperature, low frequency conductance measurements between the source and drain, it was found that devices fabricated using water had higher conductance than devices fabricated with ozone. Subsequent annealing caused both water- and ozone-based devices to increase in conductance by more than 2 orders of magnitude. Furthermore, comparison of devices at low temperatures (∼4 K) showed that annealed devices displayed much closer to the ideal behavior (i.e., constant differential conductance) outside of the Coulomb blockade region and that untreated devices showed nonlinear behavior outside of the Coulomb blockade region (i.e., an increase in differential conductance with source-drain voltage bias). Transmission electron microscopy cross-sectional images showed that annealing did not significantly change device geometry, but energy dispersive x-ray spectroscopy showed an unusually large amount of oxygen in the bottom platinum layer. This suggests that the atomic layer deposition process results in the formation of a thin platinum surface oxide, which either decomposes or is reduced during the anneal step, resulting in a tunnel barrier without the in-series native oxide contribution. Furthermore, the difference between ozone- and water-based devices suggests that ozone promotes atomic layer deposition nucleation by oxidizing the surface but that water relies on physisorption of the precursors. To test this theory, devices were exposed to forming gas at room temperature, which also reduces platinum oxide, and a decrease in resistance was observed, as expected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A nano-structured ZnO film as diagnostic X-ray sensor

Currently some international organizations such as WHO and IAEA have shown concerns about the quality of diagnostic services in clinics and hospitals that use ionizing radiation. In fact, the IAEA recommend that the characteristics of the X-ray beam must be adjusted to obtain the highest quality of the radiographic image with the minimum exposure to the patient. Several types of detectors may be used for monitoring X-ray beams, such as: ionization chamber, photodiode, phototransistor, among others. Recently nano-structured films made of various types of metal oxide materials have been used for various technological applications. Accordingly, the purpose of this paper is to present a sort of device based on a nano-structured zinc oxide (ZnO) to operate as a diagnostic X-ray sensor. By depositing a thin film on the glass substrate some ZnO semiconductor samples were built by sputtering techniques and then mounted in a BNC type connector to perform the electrical characterization. To test the device, we choose a standard X-Ray beam, the RQR9 radiation quality, which is normally used as the tool and condition for calibrating diagnostic X-Ray instruments in the energy range of computed tomography, in accordance with the stated requirements of IEC 61267. A 6430 sub-femto-ammeter, Keithley, was used as electrometer to perform the output readings and simultaneously bias the ZnO sensor. Analysis of the angular dependence and the dose rate were performed to evaluate how the device responds under the RQR9 radiation spectra. Although the results have shown that the ZnO film presents a certain angular dependence, if an angle of incidence of photons is selected, the device displays reproducibility as X-ray sensor and has the feature of radiation hardness unlike other types of semiconductor electronic devices typically used as an X-ray detector. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Suppressing Co-Crystallization of Halogenated Non-Fullerene Acceptors for Thermally Stable Ternary Solar Cells

While photovoltaic blends based on non-fullerene acceptors are touted for their thermal stability, this type of acceptor tends to crystallize, which can result in a gradual decrease in photovoltaic performance and affects the reproducibility of the devices. Two halogenated indacenodithienothiophene-based acceptors that readily co-crystallize upon mixing are studied, which indicates that the use of an acceptor mixture alone does not guarantee the formation of a disordered mixture. The addition of the donor polymer to the acceptor mixture readily suppresses the crystallization, which results in a fine-grained ternary blend with nanometer-sized domains that do not coarsen due to a high T g ≈ 200 °C. As a result, annealing at temperatures of up to 170 °C does not markedly affect the photovoltaic performance of ternary devices, in contrast to binary devices that suffer from acceptor crystallization in the active layer. The results indicate that the ternary approach enables the use of high-temperature processing protocols, which are needed for upscaling and high-throughput fabrication of organic solar cells. Further, ternary devices display a stable photovoltaic performance at 130 °C for at least 205 h, which indicates that the use of acceptor mixtures allows to fabricate devices with excellent thermal stability.

14 SOLAR ENERGY↗

Implementation of nitrogen-doped titanium-tungsten tunable heater in phase change random access memory and its effects on device performance

Nitrogen-doped titanium-tungsten (N-TiW) was proposed as a tunable heater in Phase Change Random Access Memory (PCRAM). By tuning N-TiW's material properties through doping, the heater can be tailored to optimize the access speed and programming current of PCRAM. Experiments reveal that N-TiW's resistivity increases and thermal conductivity decreases with increasing nitrogen-doping ratio, and N-TiW devices displayed (∼33% to ∼55%) reduced programming currents. However, there is a tradeoff between the current and speed for heater-based PCRAM. Analysis of devices with different N-TiW heaters shows that N-TiW doping levels could be optimized to enable low RESET currents and fast access speeds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

All-solid-state asymmetric supercapacitor based on porous cobalt selenide thin films

As a significant semiconductor material, cobalt selenide has enormous potential and extensive application prospects in the field of solar cells, photocatalysis and supercapacitor. In this paper, porous CoSe thin films were successfully fabricated on stainless-steel sheet using a facile, effective electrodeposition technique. Electrochemical tests reveal that the specific capacitance reaches as high as 510 F g –1 at the current density of 1 A g –1 with the capacitance retention of 91% over 5000 cycles. An asymmetric all-solid-state supercapacitor is fabricated using CoSe thin film as the positive electrode and activate carbon as the negative electrode. The combined solid device displays a high area specific capacitance of 18.1 mF cm –2 accompanied with good cycling stability, outstanding flexibility and satisfactory mechanical stability. Furthermore, the solid devices connected in series can power the red light-emitting diodes. Here, the results show great potential for preparing large scale high energy density storage systems.

25 ENERGY STORAGE↗

Methods of visualizing graphs

Methods for visualizing a graph by automatically drawing elements of the graph as labels are disclosed. In one embodiment, the method comprises receiving node information and edge information from an input device and/or communication interface, constructing a graph layout based at least in part on that information, wherein the edges are automatically drawn as labels, and displaying the graph on a display device according to the graph layout. In some embodiments, the nodes are automatically drawn as labels instead of, or in addition to, the label-edges.

Wong, Pak C↗

Quantum Dot Light-Emitting Devices: Beyond Alignment of Energy Levels

Multinary semiconductor nanoparticles such as CuInS 2 , AgInS 2 , and the corresponding alloys with ZnS hold promise for designing future quantum dot light-emitting devices (QLED). The QLED architectures require matching of energy levels between the different electron and hole transport layers. In addition to energy level alignment, conductivity and charge transfer interactions within these layers determine the overall efficiency of QLED. By employing CuInS 2 -ZnS QDs we succeeded in fabricating red-emitting QLED using two different hole-transporting materials, polyvinylcarbazole and poly(4- butylphenyldiphenylamine). Despite the similarity of the HOMO-LUMO energy levels of these two hole transport materials, the QLED devices exhibit distinctly different voltage dependence. The difference in onset voltage and excited state interactions shows the complexity involved in selecting the hole transport materials for display devices.

quantum dots, LED, light-emitting devices, hole-tr↗

A photo-driven dual-frequency addressable optical device of banana-shaped molecules

We propose a photonic switch employing a blend of host banana-shaped liquid crystalline molecules and guest photoisomerizable calamitic molecules. The material exhibits a change in the sign of the dielectric anisotropy switching from positive to negative, at a certain crossover frequency of the probing field. The consequent change in electric torque can be used to alter the orientation of the molecules between surface-determined and field-driven optical states resulting in a large change in the optical transmission characteristics. Here, we demonstrate the realization of this feature by an unpolarized UV beam, the first of its kind for banana-shaped molecules. The underlying principle of photoisomerization eliminates the need for a second driving frequency. The device also acts as a reversible conductance switch with an order of magnitude increase of conductivity brought about by light. Possible usage of this for optically driven display devices and image storage applications is suggested.

36 MATERIALS SCIENCE↗

Photoresponsive properties of ultrathin silicon nanowires

Functional silicon nanowires (SiNWs) are promising building blocks in the design of highly sensitive photodetectors and bio-chemical sensors. We systematically investigate the photoresponse properties of ultrathin SiNWs (20 nm) fabricated using a size-reduction method based on e-beam lithography and tetramethylammonium hydroxide wet-etching. The high-quality SiNWs were able to detect light from the UV to the visible range with excellent sensitivity (∼1 pW/array), good time response, and high photoresponsivity (R ∼ 2.5 × 10{sup 4 }A/W). Improvement of the ultrathin SiNWs' photoresponse has been observed in comparison to 40 nm counter-part nanowires. These properties are attributable to the predominance surface-effect due to the high surface-to-volume ratio of ultrathin SiNWs. Long-term measurements at different temperatures in both the forward and reverse bias directions demonstrated the stability and reliability of the fabricated device. By sensitizing the fabricated SiNW arrays with cadmium telluride quantum dots (QDs), hybrid QD SiNW devices displayed an improvement in photocurrent response under UV light, while preserving their performance in the visible light range. The fast, stable, and high photoresponse of these hybrid nanostructures is promising towards the development of optoelectronic and photovoltaic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of aluminum–boron co-doped ZnO nanostructures

Graphical abstract: In this paper, we have reported the development of aluminum boron co-doped ZnO (AZB) nanostructures deposited by sol–gel method using spin coating technique. The structure of AZB nanostructure films has been found to exhibit the hexagonal wurtzite structure. The shape of nanostructures has been changed from seed structure to tetra-pods, tetra-pods to nanorods and finally nanorods to nanofiber with variation in Al concentration. The structural, electrical and optical properties of AZB nanostructures are tuned with shape and size of the nanostructures. The effect of Al concentration on the resistivity (ρ), carrier concentration (n) and mobility (μ) of nanostructure films is shown in graph below. A minimum resistivity of 6.8 × 10{sup −4} Ω cm is obtained in AZB films at doping concentration of B 0.6 at.% and Al 0.4 at.% with a sheet resistance of 24 Ω/□ and transmittance of ∼88% for nanorods structure. These nanostructures could be applicable for a various nano-regime devices such as photovolatics, gas sensing and field emission device. Display Omitted Highlights: ► Synthesis of Al and B co-doped ZnO (AZB) nanostructures. ► Minimum resistivity (ρ) of 6.8 × 10{sup −4} Ω cm in AZB films. ► Minimum sheet resistance (R{sub s}) 24 Ω/□ in nanorods (NRs). ► Maximum transmittance ∼88% in NRs. ► Application in nano-electronic devices. -- Abstract: In this paper, we have reported the development of aluminum boron co-doped ZnO (AZB) nanostructures deposited by sol–gel method using spin coating technique. The structure of AZB nanostructure films has been found to exhibit the hexagonal wurtzite structure. The shape of AZB nanostructures has changed from seed structure to tetra-pods, tetra-pods to nanorods and finally to nanofibers with increase in aluminum concentration. The structural, electrical and optical properties of AZB films are tuned with shape and size of the nanostructures. These AZB nanostructures could be applicable for various nano-regime devices such as photovoltaic cells, gas sensors and field emission devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of an Open Smart Energy Gateway for Smart Meter Data Management

With the widespread deployment of electronic interval meters, commonly known as smart meters, came the promise of real-time data on electric energy consumption. Recognizing an opportunity to provide consumers access to their near real-time energy consumption data directly from their installed smart meter, we designed a mechanism for capturing those data for consumer use via an open smart energy gateway (OpenSEG). By design, OpenSEG provides a clearly defined boundary for equipment and data ownership. OpenSEG is an open-source data management platform to enable better data management of smart meter data. Effectively, it is an information architecture designed to work with the ZigBee Smart Energy Profile 1.x (SEP 1.x). It was specifically designed to reduce cyber-security risks and provide secure information directly from smart meters to consumers in near real time, using display devices already owned by the consumers. OpenSEG stores 48 hours of recent consumption data in a circular cache using a format consistent with commonly available archived (not real-time) consumption data such as Green Button, which is based on the Energy Services Provider Interface (ESPI) data standard. It consists of a common XML format for energy usage information and a data exchange protocol to facilitate automated data transfer upon utility customer authorization. Included in the design is an application program interface by which users can acquire data from OpenSEG for further post processing. A sample data display application is included in the initial software product. The data display application demonstrates that OpenSEG can help electricity use data to be retrieved from a smart meter and ported to a wide variety of user-owned devices such as cell phones or a user-selected database. This system can be used for homes, multi-family buildings, or small commercial buildings in California.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Multimodal emissions from Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate glass: Upconversion, downshifting and quantum cutting

This paper reports the optical properties of Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate (LB) glass prepared by melt quench method. The absorption spectrum of the Yb{sup 3+} doped LB glass contains intense NIR band centered at 976 nm due to {sup 2}F{sub 7/2}→{sup 2}F{sub 5/2} transition. The emission spectra of the prepared glasses have been monitored on excitation with 266, 355 and 976 nm. The Yb{sup 3+} doped glass emits a broad NIR band centered at 976 nm whereas the Tb{sup 3+} doped glass gives off visible bands on excitations with 266 and 355 nm. When the Tb{sup 3+} and Yb{sup 3+} ions are co-doped together, the emission intensity in the visible region decreases whereas it increases in the NIR region significantly. The increase in the emission intensity in the NIR region is due to efficient cooperative energy transfer (CET) from Tb{sup 3+} to Yb{sup 3+} ions. The quantum cutting efficiency for Tb{sup 3+}/Yb{sup 3+} co-doped glass has been calculated and compared for 266 and 355 nm excitations. The quantum cutting efficiency is larger for 355 nm excitation (137%). The Tb{sup 3+}/Yb{sup 3+} co-doped LB glass also emits upconverted visible bands on excitation with 976 nm. The mechanisms involved in the energy transfer have been discussed using schematic energy level diagram. The Tb{sup 3+}/Yb{sup 3+} co-doped LB glass may be used in the optical devices and in solar cell for solar spectral conversion and behaves as a multi-modal photo-luminescent material. - Graphical abstract: The Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate (LB) glass prepared by melt quench method emits upconverted visible emissions through upconversion CET from Yb{sup 3+} to Tb{sup 3+} ions and quantum cutting emissions through downconversion CET from Tb{sup 3+} to Yb{sup 3+} ions. Therefore, the Tb{sup 3+}/Yb{sup 3+} co-doped LB glass may find applications in optical devices and solar cell and behaves as a multi-modal photo-luminescent material. - Highlights: • The Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate (LB) glass prepared by melt quench method. • The Tb{sup 3+}/Yb{sup 3+} co-doped glass gives QC emissions upon 266 and 355 nm excitations. • The Tb{sup 3+}/Yb{sup 3+} co-doped glass also emits intense green color on excitation with 976 nm. • The quantum cutting efficiency is larger for 355 nm excitation (137%). • The Tb{sup 3+}/Yb{sup 3+} co-doped glass may be used in solar cell and display devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dimer Acceptor Adopting a Flexible Linker for Efficient and Durable Organic Solar Cells

Abstract Organic solar cells (OSCs) have advanced rapidly due to the development of new photovoltaic materials. However, the long‐term stability of OSCs still poses a severe challenge for their commercial deployment. To address this issue, a dimer acceptor ( d T9TBO) with flexible linker is developed for incorporation into small‐molecule acceptors to form molecular alloy with enhanced intermolecular packing and suppressed molecular diffusion to stabilize active layer morphology. Consequently, the PM6 : Y6 : d T9TBO‐based device displays an improved power conversion efficiency (PCE) of 18.41 % with excellent thermal stability and negligible decay after being aged at 65 °C for 1800 h. Moreover, the PM6 : Y6 : d T9TBO‐based flexible OSC also exhibits excellent mechanical durability, maintaining 95 % of its initial PCE after being bended repetitively for 1500 cycles. This work provides a simple and effective way to fine‐tune the molecular packing with stabilized morphology to overcome the trade‐off between OSC efficiency and stability.

Chemistry↗

Synthesis, Characterization and Comparative Luminescence Studies of Rare-Earth-Doped Gd{sub 2}O{sub 3} Nanoparticles

A facile direct precipitation method was used for the synthesis of luminescence nanomaterial. Gd{sub 2}O{sub 3} doped with rare earth element Eu{sup 3+} is synthesized by polyol route. The synthesized nanoparticles show their characteristic red emission. The nanoparticles are characterized by x-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and photoluminescence (PL) study. The synthesized nanoparticles are spherical particles with ~ 30 nm size. The photoluminescence studies show the characteristic Eu{sup 3+} red emission. The PL study shows the intensity of the magnetic dipole transition ({sup 5}D{sub 0}→ {sup 7}F{sub 1}) at 592 nm compared to that of the electronic dipole transition ({sup 5}D{sub 0}→ {sup 7}F{sub 2}) at 615 nm. The nanomaterials can show significant application in various display devices and biomedical applications for tracking.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Exploring thermal state in mixed immersive virtual environments

Combining immersive virtual environment (IVE) with a controlled environment is a potential solution for analyzing human thermal experience during building design. Existing studies in this field have not adequately analyzed scenarios involving stabilized comfortable and uncomfortable temperature conditions using both thermal state votes and physiological responses, or the influence of the seasons. By combining IVE with a climate chamber, called mixed IVE (MIVE) in this study, experiments were conducted to test the hypothesis that participants' virtual experience did not significantly alter their thermal experience compared to their in-situ experience. Response variables were the control temperature distribution, the thermal state vote (at temperature steps 18.3 °C, 23.8 °C, and 29.4 °C), and physiological responses (heart rate and skin temperature). The results show that the first two response variables were not significantly different between the MIVE and in-situ settings (except for one case). Due to the heat development of the head mounted display device, the mean forehead skin temperature in the MIVE experiments was significantly higher than that in the in-situ experiments in most cases. Furthermore, such difference in skin temperature did not seem to affect general thermal state votes. In addition, significant skin temperature differences at some locations were also observed between the MIVE and in-situ settings.

42 ENGINEERING↗

Frequency upconversion in Er{sup 3+} doped Y{sub 2}O{sub 3} nanophosphor:Yb{sup 3+} sensitization and tailoring effect of Li{sup +} ion

Graphical abstract: - Highlights: • Dual mode luminescence behavior of Er{sup 3+} in oxide phosphor. • Sensitization through Yb{sup 3+} codoping, and tailoring effect of lithium ion. • Phosphors for lighting and display applications. - Abstract: Er{sup 3+} doped Y{sub 2}O{sub 3} nanophosphor has been synthesized using solution combustion technique and further characterized for structure and optical properties. Optical properties of Er{sup 3+} ion have been studied both through frequency upconversion (UC) as well as through fluorescence (excitation, emission, and CIE co-ordinate analysis) processes. Further to enhance the UC emission of Er{sup 3+} ions, a two step process has been used. In the first step, Yb{sup 3+} ion has been co-doped, which acts as the sensitizer for Er{sup 3+} through energy transfer process. In the second step, different concentrations of Li{sup +} ions have been co-doped in the Er{sup 3+}/Yb{sup 3+}:Y{sub 2}O{sub 3} system. Fourier transform infrared analysis, and X-ray diffraction (XRD) followed by Le-Bail refinement of the XRD data reveal that the co-doping of Li{sup +} ion decreases unit cell parameter, increases the particle size, and removes the quenching centers (like OH, NO{sub x}, etc.), which all together causes a significant enhancement in UC emission. Optimum UC luminescence is attained for 5 mol% Li{sup +} doping concentration beyond which a quenching in UC emission is observed. This combined approach, i.e. Yb{sup 3+} sensitization and Li{sup +} ion tailoring simultaneously enhances the UC emission intensity of Er{sup 3+} several times in yttria matrix effectively. The strategy can be generalized in other hosts also which could help in the development of efficient photonic materials for lighting and display devices.

36 MATERIALS SCIENCE↗