Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Discriminant Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Muon Time-of-Flight studies for cosmic background rejection in the Short Baseline Near Detector

The Short-Baseline Neutrino (SBN) program at Fermilab is a cutting-edge project in experimental neutrino physics. One of its main goals is to systematically investigate the possible existence of eV-scale sterile neutrinos. This phenomenon has been hypothesized to explain some anomalies found in short-range experiments and, if confirmed, would imply a substantial extension of the Standard Model. SBN also offers an important opportunity to deepen the understanding of neutrino-nucleus interactions in the GeV energy range, through the use of Liquid Argon Time Projection Chambers (LArTPC) detectors, a fundamental technology also for the future DUNE experiment. The SBN experimental infrastructure consists of three detectors aligned along the Booster Neutrino Beamline at Fermilab. Among them, the detector located closest to the neutrino source, SBND (Short-Baseline Near Detector), positioned approximately 110 meters from the target, plays a key role in directly characterizing the initial neutrino flux. This allows for a direct comparison with the measurements from the far detector, ICARUS, located about 600 meters from the source, in order to search for potential signs of anomalous neutrino oscillations. My master's thesis focuses on the commissioning and characterization activities of the SBND detector, with particular reference to the Cosmic Ray Tagger (CRT). The CRT is a subsystem for identifying and rejecting events produced by cosmic rays, which constitute the main source of background for surface experiments like SBND. The activity began with the commissioning of the final components of the detector, as well as their validation to verify their correct functioning and signal acquisition. A central part of my work involved studying the veto efficiency of the CRT system, analyzing the rate of cosmic ray-induced events to quantify any loss of neutrino-induced events caused by cosmic background. This allowed for a more precise evaluation of the systematic impact of the CRT on the useful physics sample. A further phase of my analysis involved an in-depth study of the temporal correlation between the CRT signals and those acquired by the LArTPC's internal photodetector system, consisting of photomultiplier tubes and X-ARAPUCA devices. The objective is to explore the possibility of using combined temporal information as an additional criterion for discriminating between cosmic signals and signals genuinely due to neutrino interaction. Preliminary results indicate the presence of characteristic temporal signatures that could be exploited to improve event selection and increase the purity of the neutrino-induced sample. These methodologies will certainly contribute to the optimization of SBND analysis strategies and, more generally, to a better understanding of background mechanisms in next-generation LArTPC experiments.

Corallo, Annalea [Ferrara U.]↗
DOE OSTI2025

Comparative analysis of new crystal and plastic scintillators for fast and thermal neutron detection

This paper considers scintillation and physical properties of efficient organic scintillators tested as single crystals and as components of plastics with pulse shape discrimination (PSD). For the first time, single crystals of 9,9-dimethyl-2-phenyl-9H-fluorene (PhF) were grown for studies of the basic scintillation properties of this new compound. Comparison to classical organic crystals, like anthracene, trans-stilbene, and p-terphenyl, and to more recently introduced organic glass showed that the new crystal belongs to a group of the most efficient scintillators, with light output exceeding that of trans-stilbene and PSD comparable to that of p-terphenyl. Furthermore, additional studies were conducted to evaluate scintillation performance and physical properties, like hardness and dye leaching, of plastic scintillators prepared with PhF, organic glass, and liquid diisopropylnaphthalene (DIPN) that were considered as examples for potential replacement of PPO (2,5-diphenyloxazole) in current commercial PSD plastic scintillators. Comparison of the highest performing plastic scintillators prepared with these dyes shows that PhF formulations produced a record light output (LO) increase of 69 % relative to EJ-200. Similar improvements obtained with 6 Li-loaded formulations showed that future development of PSD plastics should not be limited to use of PPO but must involve the search and exploration of new efficient dyes that may lead to discovery of much brighter organic scintillators with improved physical properties required for fast and thermal neutron detection, fast neutron spectroscopy, and antineutrino detection applications.

9,9-dimethyl-2-phenyl-9H-fluorene↗
DOE OSTI2025

Unraveling Hydrogen Induced Geochemical Reaction Mechanisms through Coupled Geochemical Modeling and Machine Learning

Underground hydrogen storage (UHS) provides a promising large-scale, long-term energy storage solution. A reasonable recovery of stored hydrogen is critical for a successful storage scheme. However, in subsurface reservoirs hydrogen is subject to active geochemical reactions that might result in hydrogen loss. In this study, we implemented a geochemical modeling approach coupled with an unsupervised machine learning technique called non-negative matrix factorization (NMF) to unravel the complex brine-rock-H 2 geochemical processes responsible for hydrogen losses, with particular focus on sulfate reduction reactions. NMF is applied to modeled mineral evolution and fluid component profiles to retrieve profiles that can be interpreted to more easily assess competing processes. NMF decouples simulated competing equilibrium reactions. This facilitates separation of overlapping reaction profiles from redox processes, dissolution fronts, and secondary precipitation while considering the effects of simulation parameters such as salinity, temperature, and total H 2 pressure. NMF successfully discriminates these competing effects in nonlinear ways, allowing robust interpretation. In addition, NMF reveals subtle coupled mineral associations and reaction fronts that are invisible to conventional model analysis. This integrated approach strengthens the conceptual understanding of complex nonlinear hydrogen-brine-rock interactions and advances geochemical research on UHS systems to resolve complexities in modeled geochemical systems without the need for direct experiments or prior knowledge. Furthermore, this study highlights the efficacy of combining geochemical modeling with machine learning techniques to enhance the interpretability of the intricate geochemical simulation output through deciphering the overlapping reaction path that cannot be achieved only using conventional analysis of geochemical models alone.

08 HYDROGEN↗
DOE OSTI2026

Morphological descriptors of nanoparticles: The link between atomistic structures and x-ray absorption spectra

Understanding and quantifying the morphology of nanoparticles are essential for linking their atomic structure to diverse applications and verifying theoretical models. While experimental information on the structure of nanoparticles in the size range below ∼5 nm can be extracted from x-ray absorption spectroscopy using a small number of descriptors—most commonly coordination numbers—developing an understanding of morphology descriptors from experimental data remains a challenge. Here, in this study, we introduce NanoGene, a genetic algorithm-based method for generating structurally diverse nanoparticle models guided by user-defined descriptors. We establish correlations among structural, size-related, and morphological descriptors and demonstrate how experimentally accessible parameters, such as coordination numbers, can be leveraged to infer otherwise inaccessible ones, such as the generalized coordination number or particle oblateness. Principal component and clustering analyses reveal the relative importance of descriptors, with the number of atoms emerging as a key discriminant of the nanoparticle structure. By providing both the methodology and an extensive dataset of nanoparticle geometries, this work offers a practical foundation for descriptor-based analysis and interpretation of experimental observations, bridging the gap between local atomic coordinates and global morphological characterization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Timing reconstruction utilising multiple detection subsystems at the Short-Baseline Near Detector experiment

The Short-Baseline Near Detector (SBND) is the near detector of the Short-Baseline Neutrino Program, located only 110 m away from the Booster Neutrino Beam (BNB) target at Fermilab (Illinois, USA). SBND employs key detection technologies: a 112-ton Liquid Argon Time Projection Chamber for ionisation electrons, an advanced Photon Detection System (PDS) made up of photomultiplier tubes and X-ARAPUCAs for scintillation light, and a 4π coverage of Cosmic Ray Taggers (CRTs) for cosmic muons. This setup offers an exceptional energy, spatial and timing reconstruction of neutrino interactions. In this poster, we present ongoing timing reconstruction efforts of the PDS and CRTs, as well as combining complementary information across multiple detection subsystems to improve the timing resolution. This results in nanosecond level timing information that can be leveraged as an analysis tool, including the reconstruction of the BNB substructure to accept or reject signals detected in-between neutrino bunches as well as a timing-based discrimination for cosmic rejection.

Corallo, Annalea [INFN, Ferrara]↗
DOE OSTI2024

Kinetic Separation of Siloxanes in Metal–Organic Frameworks

We present an in silico assessment of metal–organic frameworks (MOFs) for the kinetic separation of linear and cyclic siloxanes. We employed molecular dynamics simulations investigating both rigid and flexible 1D MOF frameworks to identify a specific range of pore parameters that enables the diffusion of linear siloxanes but leads to slow diffusion of cyclic siloxanes. We then extended our analysis to flexible 3D MOFs to select adsorbents for the kinetic separation of cyclic and linear siloxanes. Based on synthesizability metrics we identified four 3D MOFs capable of discriminating between cyclic and linear siloxanes. One of the MOFs with structure code WIYFAM stood out with the ability to distinguish between cyclic and linear siloxanes and facilitate the diffusion of all linear siloxanes investigated in this study. One of the other MOFs, IRMOF-6, is found to be capable of not only discriminating between cyclic and linear siloxanes, but even between shorter and longer linear siloxanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Measurements of radioxenon activities during periods of gaseous release from an advanced gas-cooled reactor

Activities of radioxenon isotopes are reported from an Advanced Gas-cooled Reactor (AGR) during periods of gaseous release. Xenon isotopes are relevant to the monitoring regime of the Comprehensive Nuclear-Test-Ban Treaty (CTBT). These releases may affect detections from the International Monitoring System (IMS) by influencing the radioxenon background. Time series activity plots have been produced from both in-core monitoring and direct measurement at the point of release using a stack monitor system. Ratio plots using both data sets have been produced with results compared with a commonly chosen nuclear explosion “discrimination line.” The reported results improve the understanding of radionuclide emissions from civil nuclear power plants. This work is being performed as part of the Xenon Environmental Nuclide Analysis at Hartlepool (XENAH) collaboration between the Atomic Weapons Establishment (AWE, UK), EDF Energy (UK), Pacific Northwest National Laboratory (PNNL, USA), and the Swedish Defence Research Agency (FOI).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

FNCL Enhancements Implementation (FY25 Annual Report)

The FNCL investigations team at Lawrence Livermore National Laboratory (LLNL) has completed research and development of hardware, signal processing, and analysis tools to enhance the measurement capabilities of both the current CAEN SyS VeryFuel Fast Neutron Collar (FNCL) instrument and a next-generation FNCL prototype. The team successfully built and commissioned the LLNL Demonstrator System: a fully integrated, three-panel detector system featuring higher segmentation, plastic scintillators (EJ-276D), Silicon Photomultipliers (SiPMs), no high-voltage requirement, a reduced electronic footprint, and the LLNL-developed Gaussian Mixture Model Pulse Shape Discrimination (GMM-PSD) signal processing. An extensive experimental campaign was conducted at LLNL’s Inherently Safe Subcritical Assembly (ISSA) facility using both the baseline FNCL and the LLNL Demonstrator. The campaign results validated system performance, calibration stability, and the effectiveness of advanced signal processing and analysis algorithms in a relevant environment.

and physical protection↗
DOE OSTI2024

Application of Partial Least Squares Approaches to Pyroprocessing ER Data

Multivariate approaches show promise for application to process monitoring for safeguards of pyroprocessing. Past MPACT work explored the application of Principal Component Analysis (PCA) to detect off-normal conditions in pyroprocessing electrorefiner (ER) data from in the Hot Fuel Examination Facility (HFEF) at Idaho National Laboratory (INL) known as the Scalable Pyrochemical Recycling testbed (SPyRe) ER. PCA, however, does not consider the output variables. In FY24, multivariate analysis was extended from PCA to Partial Least Squares (PLS) analysis. PLS maximizes the variance between both the input signals and output variables. In the case of this work, PLS was applied in two different manners: Predictive PLS and Discriminant PLS. Predictive PLS maximizes the covariance between the process variables of the ER and the measured U concentration from in-situ voltammetry. Discriminant PLS maximizes the covariance between the process variables and a set of training process “states” such as known off-normal conditions. By projecting into the latent variable space in PLS, the process variables can be regressed onto the outputs and predictions can be made for new data sets. In this work, by applying predictive PLS, a penalized non-linear PLS approach was able to make predictions of concentration based on test and training data and detect when operations were off-normal. However, the predictive PLS does not classify the signals to which off-normal operations are attributable. Discriminant PLS can be used to classify off-normal operations but is inadequate to properly classify specific off-normal classes like power supply faults when the Discriminant PLS model is only specifically trained to detect that off-normal class. When all faults are trained against the observation data, all three operational classes are accurately classified and distinguished. Thus, future application of latent variable techniques should not select any given method, but should use a mixture of PCA, Predictive PLS, and Discriminant PLS.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Characterization of Infrasonic Signatures of Earth-Grazing Fireballs as Analogues to Hypersonic Vehicles (Final Report)

Accurate detection, discrimination, and characterization of high-altitude hypersonic events using infrasonic monitoring are critical to planetary defense and global strategic surveillance. This report synthesizes recent advances achieved through rigorous analysis of infrasonic signatures from natural meteoroids, emphasizing shallow entry-angle meteoroids as essentially proxies for artificial hypersonic systems. Meteoroids naturally encompass diverse velocities, trajectories, altitudes, and fragmentation behaviors, enabling systematic validation of empirical period–yield relationships, waveform morphology classifiers, and trajectory-induced back-azimuth deviation models. Integration of adaptive array-processing enhancements within Cardinal software further extends infrasonic detection sensitivity and signal classification reliability. Collectively these advances, based solely on infrasonic signatures or limited optical data, offer robust methodologies for distinguishing natural from artificial hypersonic sources, significantly reducing event geolocation uncertainties and refining source-function determination. The outcomes detailed herein lay foundational groundwork for improved global hypersonic event-surveillance frameworks, supporting improved security preparedness and informing strategic monitoring and defense policies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Photon classification with Gradient Boosted Trees at CLAS12

Dihadron semi-inclusive deep inelastic scattering (SIDIS) of 10.6 GeV longitudinally polarized electrons off the proton has been measured using the CLAS12 detector at Jefferson Lab. Two separate channels, π + π 0 and π - π 0 , were analyzed, requiring the reconstruction of diphoton pairs. Here, in this analysis, we addressed the problem of false neutral particles being reconstructed by CLAS12's event builder, polluting the otherwise physical combinatorial background underneath the π 0 peak. A photon classifier using a Gradient Boosted Trees (GBTs) architecture was trained with Monte Carlo simulations to reduce the amount of background π 0 's. We show that the nearest-neighbor features learned by the model lead to a substantial increase in signal vs. background discrimination compared to previous CLAS12 π^0 analyses. The machine learning approach recovers several times more dihadron statistics for the dataset.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Variational autoencoders for at-source data reduction and anomaly detection in high energy particle detectors

Detectors in next-generation high-energy physics experiments face several daunting requirements, such as high data rates, damaging radiation exposure, and stringent constraints on power, space, and latency. To address these challenges, machine learning in readout electronics can be leveraged for smart detector designs, enabling intelligent inference and data reduction at-source. Variational autoencoders (VAEs) offer a variety of benefits for front-end readout; an on-sensor encoder can perform efficient lossy data compression while simultaneously providing a latent space representation that can be used for anomaly detection. Results are presented from low-latency and resource-efficient VAEs for front-end data processing in a futuristic silicon pixel detector. Encoder-based data compression is found to preserve good performance of off-detector analysis while significantly reducing the off-detector data rate as compared to a similarly sized data filtering approach. Furthermore, the latent space information is found to be a useful discriminator in the context of real-time sensor defect monitoring. Together, these results highlight the multifaceted utility of autoencoder-based front-end readout schemes and motivate their consideration in future detector designs.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

DESI Spectroscopy of HETDEX Emission-line Candidates. I. Line Discrimination Validation

The Hobby–Eberly Dark Energy Experiment (HETDEX) is an untargeted spectroscopic galaxy survey that uses Lyα-emitting galaxies (LAEs) as tracers of 1.9 < z < 3.5 large-scale structure. Most detections consist of a single emission line, whose identity is inferred via a Bayesian analysis of ancillary data. To determine the accuracy of these line identifications, HETDEX detections were observed with the Dark Energy Spectroscopic Instrument (DESI). In two DESI pointings, high-confidence spectroscopic redshifts are obtained for 1157 sources, including 982 LAEs. The DESI spectra are used to evaluate the accuracy of the HETDEX object classifications and tune the methodology to achieve the HETDEX science requirement of ≲2% contamination of the LAE sample by low-redshift emission-line galaxies, while still assigning 96% of the true Lyα emission sample with the correct spectroscopic redshift. We compare emission-line measurements between the two experiments assuming a simple Gaussian line fitting model. Fitted values for the central wavelength of the emission line, the measured line flux, and line widths are consistent between the surveys within uncertainties. Derived spectroscopic redshifts, from the two classification pipelines, when both agree as an LAE classification, are consistent to within $\langle$Δz/(1 + z)$\rangle$ = 6.9 × 10 −5 with an rms scatter of 3.3 × 10 −4 . Data are available at https://data.desi.lbl.gov/desi/public/dr1/vac/dr1/hetdex.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Machine Learning Correlation of Electron Micrographs and ToF-SIMS for the Analysis of Organic Biomarkers in Mudstone

The spatial distribution of organics in geological samples can be used to determine when and how these organics were incorporated into the host rock. Mass spectrometry (MS) imaging can rapidly collect a large amount of data, but ions produced are mixed without discrimination, resulting in complex mass spectra that can be difficult to interpret. Here, we apply unsupervised and supervised machine learning (ML) to help interpret spectra from time-of-flight-secondary ion mass spectrometry (ToF-SIMS) of an organic-carbon-rich mudstone of the Middle Jurassic of England (UK). It was previously shown that the presence of sterane molecular biomarkers in this sample can be detected via ToF-SIMS (Pasterski, M. J. et al., Astrobiology 2023, 23, 936). We use unsupervised ML on scanning electron microscopy–electron dispersive spectroscopy (SEM-EDS) measurements to define compositional categories based on differences in elemental abundances. We then test the ability of four ML algorithms─k-nearest neighbors (KNN), recursive partitioning and regressive trees (RPART), eXtreme gradient boost (XGBoost), and random forest (RF)─to classify the ToF-SIM spectra using (1) the categories assigned via SEM-EDS, (2) organic and inorganic labels assigned via SEM-EDS, and (3) the presence or absence of detectable steranes in ToF-SIMS spectra. In terms of predictive accuracy and balanced accuracy, KNN was the best performing model and RPART the worst. The feature importance, or the specific features of the ToF-SIM spectra used by the models to make classifications, cannot be determined for KNN, preventing posthoc model interpretation. Nevertheless, the feature importance extracted from the other models was useful for interpreting spectra. In conclusion, we determined that some of the organic ions used to classify biomarker containing spectra may be fragment ions derived from kerogen which is abundant in this mudstone sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The imprint of cosmic voids from the DESI Legacy Survey DR9 Luminous Red Galaxies in the Planck 2018 lensing map through spectroscopically calibrated mocks

The cross-correlation of cosmic voids with the lensing convergence (κ) map of the Cosmic Microwave Background (CMB) fluctuations provides a powerful tool to refine our understanding of the current cosmological model. However, several studies have reported a moderate tension (up to ∼2σ) between the lensing imprint of cosmic voids on the observed CMB and the ΛCDM signal predicted by simulations. To address this “lensing-is-low” tension and to obtain new, precise measurements of the signal, we exploit the large DESI Legacy Survey Luminous Red Galaxy (LRG) data set, covering approximately 19 500 deg 2 of the sky and including about 10 million LRGs at z < 1.05. Our ΛCDM template was created using the Buzzard mocks, which we specifically calibrated to match the clustering properties of the observed galaxy sample by exploiting more than one million DESI spectra. We identified our catalogs of 3D voids in the range 0.35 < z < 0.95 and cross-correlated them through a stacking methodology, dividing the sample into bins according to the redshift and λv values of the voids. For the full void sample, we report a 14σ detection of the lensing signal, with A κ = 1.016 ± 0.054, which increases to 17σ when considering the void-in-void (A κ = 0.944 ± 0.064) and the void-in-cloud (A κ = 0.975 ± 0.060) populations individually, the highest detection significance for studies of this kind. We observe a full agreement between observations and ΛCDM mocks across all redshift bins, sky regions, and void populations considered. In addition to these findings, our analysis highlights the importance of accurately matching sparseness and redshift error distributions between mocks and observations, as well as the role of λ v in enhancing the signal-to-noise ratio through void population discrimination.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

New Constraints on the Melting Temperature and Phase Stability of Shocked Iron up to 270 GPa Probed by Ultrafast X-Ray Absorption Spectroscopy

Studying the properties and phase diagram of iron at high-pressure and high-temperature conditions has relevant implications for Earth’s inner structure and dynamics and the temperature of the inner core boundary (ICB) at 330 GPa. Also, a hexagonal-closed packed to body-centered cubic (bcc) phase transition has been predicted by many theoretical works but observed only in a few experiments. The recent coupling of high-power laser with advanced x-ray sources from synchrotrons allows for novel approaches to address these issues. Here, we present a study on shock compressed iron up to 270 GPa and 5800 K probed by single-pulse (100 ps FWHM) x-ray absorption spectroscopy (XAS). Based on the analysis of the XAS spectra, we provide structural identification and bulk temperature measurements along the Hugoniot up to the melting. These results rule out the predicted transition to a high-temperature bcc phase and allow one to discriminate among existing equations of state models and melting curves. In particular, we report the first bulk temperature measurement in shock compressed iron on the melting plateau at 240(20) GPa and 5345(600) K. The melting curve resulting from our work extrapolates to a temperature of 6202(514) K at 330 GPa and represents a refined upper bound for the ICB temperature. Published by the American Physical Society 2024

Balugani, S.↗
DOE OSTI2025

Environmental Conditions Affecting Global Mesoscale Convective System Occurrence

Abstract The ERA5 environments of mesoscale convective systems (MCSs), tracked from satellite observations, are assessed over a 20-yr period. The use of a large set of MCS tracks allows us to robustly test the sensitivity of the results to factors such as region, latitude, and diurnal cycle. We aim to provide novel information on environments of observed MCSs for assessments of global atmospheric models and to improve their ability to simulate MCSs. Statistical analysis of all tracked MCSs is performed in two complementary ways. First, we investigate the environments when an MCS has occurred at different spatial scales before and after MCS formation. Several environmental variables are found to show marked changes before MCS initiation, particularly over land. The vertically integrated moisture flux convergence shows a robust signal across different regions and when considering MCS initiation diurnal cycle. We also found spatial scale dependence of the environments between 200 and 500 km, providing new evidence of a natural length scale for use with MCS parameterization. In the second analysis, the likelihood of MCS occurrence for given environmental conditions is evaluated, by considering all environments and determining the probability of being in an MCS core or shield region. These are compared to analogous non-MCS environments, allowing discrimination between conditions suitable for MCS and non-MCS occurrence. Three environmental variables are found to be useful predictors of MCS occurrence: total column water vapor, midlevel relative humidity, and total column moisture flux convergence. Such relations could be used as trigger conditions for the parameterization of MCSs, thereby strengthening the dependence of the MCS scheme on the environment. Significance Statement Large storm systems called mesoscale convective systems form across Earth. These are collections of thunderstorms, with associated high-level clouds that produce substantial, lighter rainfall and modulate Earth’s energy balance. They produce hazardous weather conditions, such as floods and high winds, and are responsible for a high percentage of rainfall in many regions globally. We investigate the environmental conditions under which they form, so that we can understand the spatial extent of the environment which is important for their formation, and also where and when the effects of these storms might be felt. The novel information generated here should help improve the representation of these storms in weather and climate models, improving the prediction of rainfall, thunderclouds, and high-level clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Position-Specific Carbon Isotope Fingerprinting of Fluorinated Organics and Degradation Products

Fluorinated organic compounds are of growing environmental and forensic relevance due to their widespread use in pharmaceuticals, agrochemicals, and consumer products, their environmental persistence, and potential ecological and human health impacts. Elucidating their sources and transformation pathways is therefore a major focus of current research. Stable carbon isotope analysis provides a powerful approach for tracing molecular origins and linking parent compounds to degradation products. Recent isotope measurements have largely relied on mass-spectrometry techniques, which provide only an average isotope ratio across a compound. In this work, we employ a novel nuclear magnetic resonance (NMR) spectroscopy tool to determine position-specific carbon isotope ratios ( 13 C/ 12 C) in organofluorine compounds and their degradation products. This approach enables isotope measurements without combustion or extensive purification and, crucially, resolves ratios at individual carbon positions rather than bulk averages. The resulting intramolecular isotope fingerprints are unique to a molecule’s source. Applied to selected pharmaceuticals and pesticides, these fingerprints allow discrimination of chemically identical compounds. Moreover, we show that the 13 C/ 12 C signature at the fluorinated carbon persists through degradation, demonstrated for lansoprazole and fipronil. The 19 F NMR data produced for the 13 C/ 12 C analyses are also well suited for impurity profiling, providing an additional dimension for fingerprinting fluorinated organics. These findings suggest that position-specific isotope analysis can serve as part of a broader suite of tools for source characterization of organofluorine compounds and their breakdown derivatives, with potential applications in product validation, forensics, and linking these compounds to their breakdown products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗