Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Discretization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Discrete Data Qualification System and Method Comprising Noise Series Fault Detection

A Sensor Data Qualification (SDQ) function has been developed that allows the onboard flight computers on NASA s launch vehicles to determine the validity of sensor data to ensure that critical safety and operational decisions are not based on faulty sensor data. This SDQ function includes a novel noise series fault detection algorithm for qualification of the output data from LO2 and LH2 low-level liquid sensors. These sensors are positioned in a launch vehicle s propellant tanks in order to detect propellant depletion during a rocket engine s boost operating phase. This detection capability can prevent the catastrophic situation where the engine operates without propellant. The output from each LO2 and LH2 low-level liquid sensor is a discrete valued signal that is expected to be in either of two states, depending on whether the sensor is immersed (wet) or exposed (dry). Conventional methods for sensor data qualification, such as threshold limit checking, are not effective for this type of signal due to its discrete binary-state nature. To address this data qualification challenge, a noise computation and evaluation method, also known as a noise fault detector, was developed to detect unreasonable statistical characteristics in the discrete data stream. The method operates on a time series of discrete data observations over a moving window of data points and performs a continuous examination of the resulting observation stream to identify the presence of anomalous characteristics. If the method determines the existence of anomalous results, the data from the sensor is disqualified for use by other monitoring or control functions.

Fulton, Christopher↗
NASA NTRS2022

Discrete Aurora on the Nightside of Mars: Occurrence Location and Probability

This paper represents the first attempt to predict the occurrence location and probability of discrete electron aurora on the nightside of Mars. We run a 3-D time-dependent magnetohydrodynamic model to characterize the spatial and temporal dynamics of magnetic field and plasma distributions over the course of one planetary rotation. We perform eight simulation cases under solar minimum quiet-solar-wind conditions (four equinox/solstice seasons, each with two interplanetary magnetic field polarities) and in an actual interplanetary coronal mass ejection (ICME) case to assess quiet and space weather situations, respectively. The occurrence of detectable discrete aurora is subject to the combination of the probabilities that (a) the ionosphere is magnetically connected with high altitudes through open field lines and (b) precipitating energy fluxes of >30 eV electrons exceed 0.1 erg/cm2/s. Our results show that during quiet solar activity, discrete aurora occurs likely on small-scale patches embedded inside strong crustal magnetic field regions (with a magnitude greater than 50 nT at 150 km), and the overall chance across the globe is ∼0.77%. The higher probability over strong crustal field regions is attributed to the stronger magnetic field convergence. Modeling shows the occurrence probability dramatically increases during the ICME event, particularly by more than an order of magnitude in weak crustal field regions. Our model results reasonably agree with NASA Mars Atmosphere and Volatile EvolutioN and Mars Express observations. Our study suggests that nightside discrete electron aurora is not caused by the direct entry of magnetosheath plasma in a cusp-like process but due to the recycling of nightside magnetospheric electrons.

Xiaohua Fang↗
NASA NTRSDate not supplied

Discretization Error Estimation and Control for Farfield Acoustic Signatures

We investigate the utility of adjoint-based error estimates for sonic boom farfield simulations governed by solutions of the augmented Burgers’ equation. Solution of this nonlinear system uses operator splitting with a second-order finite volume discretization in space and second-order Runge-Kutta time marching, while the absorption and molecular relaxation are solved using second-order central differencing. The discretization error in selected ground sonic boom cost functionals is estimated using the method of adjoint-weighted residuals. Key elements of the implementation process are emphasized with details provided on the practical aspects as appliedto the sonic boom farfield propagation. We establish the accuracy of the adjoint solutions usingcomplex step and finite difference approaches, and examine the accuracy of the error estimates using analytical N-wave solutions. We then apply it to a pressure waveform corresponding to the X-59 research aircraft. The investigations demonstrate that the method of adjoint-weighted residuals accurately predicts the level of discretization error present in sonic boom farfield simulations while offering insight into which features of the near field signal are the primary drivers of ground noise metrics. The numerical results indicate that at sampling frequencies as low as50kHz, discretization error in the propagation is under 0.01 dB[A] for realistically complex examples.

CST↗
NASA NTRS2020

Spectral Spherical Harmonics Discrete Ordinate Method

A new method for modeling the radiative transfer in inhomogeneous three-dimensional media illuminated by a Gaussian beam is described. This approach, called the Spectral Spherical Harmonics Discrete Ordinate Method (SSHDOM), uses the Fourier expansion method to transform the three-dimensional radiative transfer into an one-dimensional equation in the spectral domain, and the Spherical Harmonics Discrete Ordinate Method (SHDOM) for its solution. Specifically, (i) the source function is represented in the spectral domain through a spherical harmonic expansion, (ii) the spectral one-dimensional radiative transfer equation is integrated along discrete ordinates through a spatial grid, and (iii) the solution method is based on the Picard iteration. Both SSHDOM and SHDOM algorithms are implemented in a common computer code.

Gaussian beam↗
NASA NTRS1971

Comparison of a discrete steepest ascent method with the continuous steepest ascent method for optimal programing

A discrete steepest ascent method which allows controls which are not piecewise constant (for example, it allows all continuous piecewise linear controls) was derived for the solution of optimal programming problems. This method is based on the continuous steepest ascent method of Bryson and Denham and new concepts introduced by Kelley and Denham in their development of compatible adjoints for taking into account the effects of numerical integration. The method is a generalization of the algorithm suggested by Canon, Cullum, and Polak with the details of the gradient computation given. The discrete method was compared with the continuous method for an aerodynamics problem for which an analytic solution is given by Pontryagin's maximum principle, and numerical results are presented. The discrete method converges more rapidly than the continuous method at first, but then for some undetermined reason, loses its exponential convergence rate. A comparsion was also made for the algorithm of Canon, Cullum, and Polak using piecewise constant controls. This algorithm is very competitive with the continuous algorithm.

Childs, A. G.↗
NASA NTRS1972

Design of non-interacting multivariable discrete time systems

The theory of decoupling a multivariable system with the help of state variable feedback is applied to discrete time systems. The system differential equations in the continuous time domain are converted to a discrete time representation. A discrete time controller is designed to control the overall input to the system such that a specified desired decoupled output response is obtained. The decoupled system behaves as a set of single-input, single-output systems and state variable techniques can be easily applied to control each output individually. Control is achieved by periodically sampling the inputs and all the states and feeding them back through a controller. For linear time invariant systems the control is time invariant. The basic theory of decoupling involves feeding back all the states twice, first to decouple the system and then to achieve a desired response. The states of the system are computed with the help of a state estimator which calculates all the present states of the system so that on-line control can be applied to real time systems. The theory is applied to a model of a nuclear rocket engine.

Agrawal, B. L.↗
NASA NTRS1972

Fixed interval smoothing with discrete measurements.

Smoothing equations for a linear continuous dynamic system with linear discrete measurements, derived from the discrete results of Rauch, Tung, and Striebel (1965), (R-T-S), are used to extend, through recursive updating, the previously published results of Bryson and Frazier (1963), (B-F), and yield a modified Bryson and Frazier, (M-B-F), algorithm. A comparison of the (M-B-F) and (R-T-S) algorithms leads to the conclusion that the former is to be preferred because it entails less computation, less storage, and less instability. It is felt that the presented (M-B-F) smoothing algorithm is a practical mechanization and should be of value in smoothing discretely observed dynamic linear systems.

Bierman, G. J.↗
NASA NTRS1975

A subvortex technique for the close approach to a discretized vortex sheet

The close-approach problem associated with flow calculation methods based on vortex-lattice theory was examined numerically using two-dimensional discretized vortex sheets. The analysis first yields a near-field radius of approximately the distance apart of the vortices in the lattice; only within this distance from the sheet are the errors arising from the discretization significant. Various modifications to the discrete vortices are then considered with the objective of reducing the errors. This leads to a near-field model in which a vortex splits into an increasing number of subvortices as it is approached. The subvortices, whose strengths vary linearly from the vortex position, are evenly distributed along an interpolated curve passing through the basic vortices. This subvortex technique can be extended to the three-dimensional case and is efficient because the number of vortices is effectively increased, but only where and when needed.

Maskew, B.↗
NASA NTRS1977

Comparison of continuous and discrete adaptive identification algorithms

Discretization of a popular continuous-time control algorithm is effected and an equivalent discrete-time identification law developed and compared to a published discrete identification algorithm developed from Lyapunov Theory. Results are compared as regards asymptotic stability as insured using Lyapunov theory. Some analysis and design guidelines are proposed as regards implementation and practical utility.

Colburn, B. K.↗
NASA NTRS1977

Generalized computer-aided discrete time domain modeling and analysis of dc-dc converters

A generalized discrete time domain modeling and analysis technique is presented for all types of switching regulators using any type of duty-cycle controller, and operating in both continuous and discontinuous inductor current. State space techniques are employed to derive an equivalent nonlinear discrete time model that describes the converter exactly. The system is linearized about its equilibrium state to obtain a linear discrete time model for small signal performance evaluations, such as stability, audiosusceptibility and transient response. The analysis makes extensive use of the digital computer as an analytical tool. It is universal, exact and easy to use.

Lee, F. C.↗
NASA NTRS1979

The computation of isentropic atmospheric trajectories using a 'discrete model' formulation

An explicit technique for calculating atmospheric trajectories is presented as an alternative method to the standard implicit scheme of Danielsen (1961). The technique uses the inviscid equations of motion and the discrete model formulation derived by Greenspan (1972, 1973) to compute trajectories on isentropic surfaces, assuming adiabatic flow. The discrete model formulation is designed specifically for a Lagrangian system and objectively accounts for the geostrophic departures, local psi-tendencies, and the subsequent accelerations along the entire length of the trajectory. Application of the discrete formulation to a diagnostic case study yielded favorable results.

Petersen, R. A.↗
NASA NTRS1982

Systematic generation of nonlinear discretized dynamic equilibrium equations of spinning cantilevers

General nonlinear discretized governing equations of motion of spinning elastic solids and structures are adjusted for the case of a spinning cantilever with initial geometric imperfections. Consideration is given to second degree nonlinearities in the strain-displacement and velocity-displacement relationships. Parameters of the discretization are developed to include the type and number of the coordinate functions used in the admissible trial solution in order to unify the discretization approaches associated with stationarity principles. The coordinate functions comprise both sets of continuous and piecewise continuous functions employed in the Rayleigh-Ritz and the finite element methods, respectively. Coefficient matrices are provided which contain the energy density expressions and which are adaptable to computer programming.

El-Essawi, M.↗
NASA NTRS1982

Discrete-time stability of continuous-time controller designs for large space structures

In most of the stable control designs for flexible structures, continuous time is assumed. However, in view of the implementation of the controllers by on-line digital computers, the discrete-time stability of such controllers is an important consideration. In the case of direct-velocity feedback (DVFB), involving negative feedback from collocated force actuators and velocity sensors, it is not immediately apparent how much delay due to digital implementation of DVFB can be tolerated without loss of stability. The present investigation is concerned with such questions. A study is conducted of the discrete-time stability of DVFB, taking into account an employment of Euler's method of approximation of the time derivative. The obtained result gives an indication of the acceptable time-step size for stable digital implementation of DVFB. A result derived in connection with the consideration of the discrete-time stability of stable continuous-time systems provides a general condition under which digital implementation of such a system will remain stable.

Balas, M. J.↗
NASA NTRS1986

An analytical treatment of discretely varying constraints and inertial properties in multi-body dynamics

A computerized procedure is presented for calculating instantaneous velocity changes due to discrete imposition of constraints, impact or discrete inertial changes. Such discrete changes are impulsive in nature, involve wave propagation and therefore usually require detailed modeling for accurate prediction. It is demonstrated that when modeling is coarse, physically unrealistic results can be produced. The present procedure, which concentrates on finite element analysis, reduces the need for detailed modeling by assuming that only those velocities in the neighborhood of grid points involved in the constraint or those rigidly connected to grid points involved in the constraint need be considered in calculating velocity changes. The procedure utilizes Newton's second law and as such conserves momentum where valid. Sample problems are provided.

Housner, J. M.↗
NASA NTRS1987

Approximation of discrete-time LQG compensators for distributed systems with boundary input and unbounded measurement

The approximation of optimal discrete-time linear quadratic Gaussian (LQG) compensators for distributed parameter control systems with boundary input and unbounded measurement is considered. The approach applies to a wide range of problems that can be formulated in a state space on which both the discrete-time input and output operators are continuous. Approximating compensators are obtained via application of the LQG theory and associated approximation results for infinite dimensional discrete-time control systems with bounded input and output. Numerical results for spline and modal based approximation schemes used to compute optimal compensators for a one dimensional heat equation with either Neumann or Dirichlet boundary control and pointwise measurement of temperature are presented and discussed.

Gibson, J. S.↗
NASA NTRS1986

Discrete Dirac equation on a finite half-integer lattice

The formulation of the Dirac equation on a discrete lattice with half-integer spacing and periodic boundary conditions is investigated analytically. The importance of lattice formulations for problems in field theory and quantum mechanics is explained; the concept of half-integer Fourier representation is introduced; the discrete Dirac equation for the two-dimensional case is derived; dispersion relations for the four-dimensional case are developed; and the spinor formulation for the Dirac fields on the half-integer lattice and the discrete time variable for the four-dimensional time-dependent Dirac equation are obtained. It is argued that the half-integer lattice, because it takes the Dirac Lagrangian into account, is more than a mere relabeling of the integer lattice and may have fundamental physical meaning (e.g., for the statistics of fermions). It is noted that the present formulation does not lead to species doubling, except in the continuum limit.

Smalley, L. L.↗
NASA NTRS1987

A method for nonlinear optimization with discrete design variables

A numerical method is presented for the solution of nonlinear discrete optimization problems. The applicability of discrete optimization to engineering design is discussed, and several standard structural optimization problems are solved using discrete design variables. The method uses approximation techniques to create subproblems suitable for linear mixed-integer programming methods. The method employs existing software for continuous optimization and integer programming.

Olsen, Gregory R.↗