SEARCH · Engineering Papers

Results for “Dimensionless Numbers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Thermodynamic effects on developed cavitation

The results of an investigation of thermodynamic effects are presented. Distributions of temperature and pressure in a developed cavity were measured for zero- and quarter-caliber ogives. A semiempirical entrainment theory was developed to correlate the measured temperature depression in the cavity. This theory correlates the maximum temperature depression expressed in dimensionless form as the Jakob number in terms of the dimensionless numbers of Nusselt, Reynolds, Froude, and Peclet, and dimensionless cavity length, L/D. The results show that in general, the temperature depression increases with L/D and temperature and the cavitation number based on measured cavity pressure is a function of L/D for a given model contour, independent of the thermodynamic effect.

Holl, J. W.↗

NASA NTRS1973

Local heat-transfer characteristics of a row of circular air jets impinging on a concave semicylindrical surface

An experimental study was made of the local heat-transfer characteristics of air jets impinging on the concave side of a right circular semicylinder. A correlation was developed for expressing individual and combined effects of a number of dimensionless variables on the normalized Nusselt number distributions. Results of the present study are in good agreement with those of other investigators.

Livingood, J. N. B.↗

NASA NTRS1971

Designing the brawny gas bearing.

Discussion of a graphic technique for matching specific groove parameters to operating conditions in order to optimize the load carrying capacity of a herringbone-grooved bearing. Details are given on the optimization of the film thickness ratio, the groove width ratio, the groove angle, and the groove length ratio to obtain a maximum radial load capacity. The effect of the dimensionless bearing number on optimal groove configuration parameters is shown in diagrams. Curves are also plotted to compare the capacities of a herringbone-grooved bearing and a plain bearing, showing the former has a higher load capacity than the latter when the dimensionless bearing number is large.

Hamrock, B. J.↗

NASA NTRS1973

Heat transfer characteristics of a single circular air jet impinging on a concave hemispherical shell

An experimental study was made of the local and average heat-transfer characteristics of a single turbulent air jet impinging on the concave surface of a hemisphere. Correlations were developed for expressing the effects of a number of dimensionless variables on the local and average Nusselt numbers. Results of the present study are compared with those from a similar study concerning a concave surface of a semicylindrical shell.

Livingood, J. N. B.↗

NASA NTRS1995

Analysis of gas absorption to a thin liquid film in the presence of a zero-order chemical reaction

The paper presents a detailed theoretical analysis of the process of gas absorption to a thin liquid film adjacent to a horizontal rotating disk. The film is formed by the impingement of a controlled liquid jet at the center of the disk and subsequent radial spreading of liquid along the disk. The chemical reaction between the gas and the liquid film can be expressed as a zero-order homogeneous reaction. The process was modeled by establishing equations for the conservation of mass, momentum, and species concentration and solving them analytically. A scaling analysis was used to determine dominant transport processes. Appropriate boundary conditions were used to solve these equations to develop expressions for the local concentration of gas across the thickness of the film and distributions of film height, bulk concentration, and Sherwood number along the radius of the disk. The partial differential equation for species concentration was solved using the separation of variables technique along with the Duhamel's theorem and the final analytical solution was expressed using confluent hypergeometric functions. Tables for eigenvalues and eigenfunctions are presented for a number of reaction rate constants. A parametric study was performed using Reynolds number, Ekman number, and dimensionless reaction rate as parameters. At all radial locations, Sherwood number increased with Reynolds number (flow rate) as well as Ekman number (rate of rotation). The enhancement of mass transfer due to chemical reaction was found to be small when compared to the case of no reaction (pure absorption), but the enhancement factor was very significant when compared to pure absorption in a stagnant liquid film. The zero-order reaction processes considered in the present investigation included the absorption of oxygen in aqueous alkaline solutions of sodiumdithionite and rhodium complex catalyzed carbonylation of methanol. Present analytical results were compared to previous theoretical results for limiting conditions, and were found to have very good agreement.

Rajagopalan, S.↗

DOE OSTI2021

Analysis of the Reactive CO 2 Surface Flux in Electrocatalytic Aqueous Flow Reactors

We study how the mass transfer of a chemical species in shear flow is suppressed by the production of a second species that partially reacts away the first species. The second species is produced at the surface with the first species as a reactant. Our work is directly motivated by electrochemical CO 2 reduction in aqueous flow reactors, where OH– molecules generated by the CO evolution reaction react away CO 2 molecules, ultimately inhibiting the mass transfer of CO 2 to the cathode surface. We derive a simple approximation of the Sherwood number, a dimensionless measure of the mass flux into the surface, as a function of the Péclet number, surface Damköhler number, and bulk Damköhler number, and we compare our approximation to numerical solutions of the governing equations. We find that in the diffusion-limited regime, the Sherwood number is well described by the classical Graetz-Lévêque result reduced by a reaction factor due to the competing bulk reaction; with the stoichiometry relevant to electrochemical CO 2 reduction, this reaction factor is 1/2. While the model problem we solve provides insight into how OH– production affects CO 2 mass transfer, experimental systems often involve more complex chemistry. We thus also show how a common buffered electrolyte, KHCO 3 , affects our results.

30 DIRECT ENERGY CONVERSION↗

NASA NTRS1999

Paramagnetic Liquid Bridge in a Gravity-Compensating Magnetic Field

Magnetic levitation was used to stabilize cylindrical columns of a paramagnetic liquid in air between two solid supports. The maximum achievable length to diameter ratio R(sub max) was approx. (3.10 +/- 0.07), very close to the Rayleigh-Plateau limit of pi. For smaller R, the stability of the column was measured as a function of the Bond number, which could be continuously varied by adjusting the strength of the magnetic field. Liquid bridges supported by two solid surfaces have been attracting scientific attention since the time of Rayleigh and Plateau. For a cylindrical bridge of length L and diameter d, it was shown theoretically that in zero gravity the maximum slenderness ratio R (identically = L/d) is pi. The stability and ultimate collapse of such bridges is of interest because of their importance in a number of industrial processes and their potential for low gravity applications. In the presence of gravity, however, the cylindrical shape of an axisymmetric bridge tends to deform, limiting its stability and decreasing the maximum achievable value of R. Theoretical studies have discussed the stability and possible shapes of axisymmetric bridges. Experiments typically are performed in either a Plateau tank, in which the bridge is surrounded by a density-matched immiscible fluid, or in a space-borne microgravity environment. It has been shown, for example, that the stability limit R can be pushed beyond pi by using flow stabilization, by acoustic radiation pressure, or by forming columns in the presence of an axial electric field. In this work, magnetic levitation was used to simulate a low gravity environment and create quasi-cylindrical liquid columns in air. Use of a magnetic field permits us to continuously vary the Bond number B identically equal to (g)(rho)d(exp 2)/4(sigma), where g is the gravitational acceleration, rho is the density of the liquid, and sigma is the surface tension of the liquid in air. The dimensionless Bond number represents the relative importance of external forces acting on the liquid column to those due to surface tension. Our central result is that in a large magnetic field gradient we could create and stabilize columns of mixtures of water and paramagnetic manganese chloride tetrahydrate (MnCl2.4H2O), achieving a length to diameter ratio very close to pi.

Mahajan, Milind P.↗

DOE OSTI2023

Kinetics and Mechanism of Tetravalent Cerium Extraction by Di-2-Ethylhexyl Isobutyramide (DEHiBA)

DEHiBA is a fully-incinerable, CHON extractant with a high selectivity for hexavalent actinides. However, as a recently-developed ligand, much remains unknown about its physical and chemical properties, including its extraction and phase disengagement rates. Here, we present data on the phase transfer kinetics of Ce(IV) extraction and stripping by both DEHiBA and TBP collected using microfluidic devices. Ce(IV) was selected as a surrogate for Pu(IV) and Np(IV) in the initial tests of the microfluidics system prior to testing with the actinides. Pseudo first-order reaction rate constants are determined for both systems, and the corresponding Damköhler numbers (Da) are calculated to establish whether the extraction and stripping processes are kinetically or diffusion controlled. The stoichiometry of the extracted Ce(IV)-DEHiBA complex is determined, and the phase disengagement properties under extraction conditions are assessed using the dimensionless dispersion number. A possible explanation for the favorable extraction of Ce(IV) by DEHiBA, which is known to poorly extract many tetravalent cations, is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1952

Experimental investigation of free-convection heat transfer in vertical tube at large Grashof numbers / E. R. G. Eckert, A. J. Diaguila

Local free-convection heat-transfer coefficients and temperature fields in the turbulent flow range were obtained within a vertical, stationary tube closed at the boom, heated along its walls, and having a length-to-diameter ratio of 5. Convective heat-transfer coefficients were correlated by the general relations for free-convection heat transfer. These coefficients, converted to dimensionless Nusselt numbers were 35 percent below known relations for vertical flat plates. Air temperature measurements within the tube indicated a thin boundary layer along the heated wall surface and unstable conditions in the air flow.

HEAT TRANSFER↗

NASA NTRS1996

Determination of Thermal State of Charge in Solar Heat Receivers

The research project at Howard University seeks to develop analytical and numerical capabilities to study heat transfer and fluid flow characteristics, and the prediction of the performance of solar heat receivers for space applications. Specifically, the study seeks to elucidate the effects of internal and external thermal radiation, geometrical and applicable dimensionless parameters on the overall heat transfer in space solar heat receivers. Over the last year, a procedure for the characterization of the state-of-charge (SOC) in solar heat receivers for space applications has been developed. By identifying the various factors that affect the SOC, a dimensional analysis is performed resulting in a number of dimensionless groups of parameters. Although not accomplished during the first phase of the research, data generated from a thermal simulation program can be used to determine values of the dimensionless parameters and the state-of-charge and thereby obtain a correlation for the SOC. The simulation program selected for the purpose is HOTTube, a thermal numerical computer code based on a transient time-explicit, axisymmetric model of the total solar heat receiver. Simulation results obtained with the computer program are presented the minimum and maximum insolation orbits. In the absence of any validation of the code with experimental data, results from HOTTube appear reasonable qualitatively in representing the physical situations modeled.

Glakpe, E. K.↗

NASA NTRS2000

The Dynamics of Miscible Interfaces: A Space Flight Experiment

Experiments as well as accompanying simulations are described that serve in preparation of a space flight experiment to study the dynamics of miscible interfaces. The investigation specifically addresses the importance of both nonsolenoidal effects as well as nonconventional Korteweg stresses in flows that give rise to steep but finite concentration gradients. The investigation focuses on the flow in which a less viscous fluid displaces one of higher viscosity and different density within a narrow capillary tube. The fluids are miscible in all proportions. An intruding finger forms that occupies a fraction of the total tube diameter. Depending on the flow conditions, as expressed by the Peclet number, a dimensionless viscosity ratio, and a gravity parameter, this fraction can vary between approximately 0.9 and 0.2. For large Pe values, a quasi-steady finger forms, which persists for a time of O(Pe) before it starts to decay, and Poiseuille flow and Taylor dispersion are approached asymptotically. Depending on the specific flow conditions, we observe a variety of topologically different streamline patterns, among them some that leak fluid from the finger tip. For small Pe values, the flow decays from the start and asymptotically reaches Taylor dispersion after a time of O(Pe). Comparisons between experiments and numerical simulations based on the 'conventional' assumption of solenoidal velocity fields and without Korteweg stresses yield poor agreement as far as the Pe value is concerned that distinguishes these two regimes. As one possibility, we attribute this lack of agreement to the disregard of these terms. An attempt is made to use scaling arguments in order to evaluate the importance of the Korteweg stresses and of the assumption of solenoidality. While these effects should be strongest in absolute terms when steep concentration fronts exist, i.e., at large Pe, they may be relatively most important at lower values of Pe. We subsequently compare these conventional simulations to more complete simulations that account for nonvanishing divergence as well as Korteweg stresses. While the exact value of the relevant stress coefficients are not known, ballpark numbers do exist, and their use in the simulations indicates that these stresses may indeed be important. We plan to evaluate these issues in detail by means of comparing a space experiment with corresponding simulations, in order to extract more accurate Korteweg stress coefficients, and to confirm or deny the importance of such stresses.

Maxworthy, Tony↗

DOE OSTI2021

A two-phase three-field modeling framework for heat pipe application in nuclear reactors

Heat pipes and two-phase thermosyphons are highly efficient heat transfer devices utilizing continuous evaporation and condensation of working fluid for two-phase heat transport in closed systems. Because of the nearly isothermal and fully passive phase-change heat transfer mechanism, heat pipes and thermosyphons have found many applications in nuclear engineering, space technologies, and other energy systems. High-temperature heat pipes are used in nuclear microreactors to remove fission power from the primary system and are coupled with power conversion systems or process heat applications. Modeling of the two-phase flow phenomena inside a heat pipe is essential to its design and safety analysis. In this study, a comprehensive one-dimensional two-phase three-field flow model has been developed for the analysis of heat pipes in normal operation conditions and transients. The conservation or field equations of mass, momentum, and energy were developed for the liquid film, vapor, and droplet. In addition, constitutive models or correlations were reviewed thoroughly and provided for the closure of the three-field equations. Specific constitutive equations regarding interfacial mass and heat transfer at two interfaces, namely film-gas interface and gas-droplet interface, were reviewed for droplet entrainment and deposition rates as well as film and droplet evaporation rates. Furthermore, mechanistic correlations of annular flow film thickness were recommended for the modeling of the thermosyphons without a wick as a critical constitutive correlation. Furthermore, experimental data needs from new experiments using a prototype working fluid or surrogate fluids for the model validation of high-temperature heat pipes in microreactors were recommended for future research.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2023

Mass transfer in catalytic depolymerization: External effectiveness factors and serendipitous processivity in stagnant and stirred melts

Several heterogeneous catalysts are being developed to recycle plastics. Most operate in viscous polymer melts, where external mass transfer effects could limit the supply of co-reactants to active sites. External mass transfer can also impede the diffusion of long chain products away from the catalyst after each cut. Product egress limitations could potentially confer unintentional processivity to catalyst operation, i.e. a tendency for the catalyst to repeatedly cut the same chain after an initial encounter. We formulate reaction–diffusion equations to quantify mass transfer effects on the co-reactant transport to the catalyst and the degree of serendipitous processivity. Results are developed for catalysts in stagnant or stirred melts, with simple expressions involving Damkohler, Peclet, and Sherwood numbers, i.e. dimensionless combinations of rate constants, catalyst particle size, polymer diffusivities, and shear rates (where applicable). In conclusion, we estimate the impact of these effects for a spherical core–shell catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Shear rate dependency on flowing granular biomass material

The commercialization of bioenergy has been significantly limited by various material handling issues due to the poor flowability of granular biomass materials. A good understanding of flow physics and robust constitutive models to predict flow behavior across multiple regimes are essential to address these issues. In this study, we investigated the multi-regime flow behavior of loblolly pine chips, a widely used bioenergy feedstock, through comprehensive inclined plane flow experiments and simulations. A quasi-static hypoplastic model and a cross-regime Drucker-Prager-µ(I) model were calibrated and validated against the physical experiments to investigate the quasi-static and dense flow behavior. The results show that for granular biomass, 1) plane flow (iso-thickness along the plane) exists within a smaller range of inclination while heap flow (varying thickness along the plane) exists within a broader range of inclination, as compared with conventional granular materials (e.g., glass beads); 2) the scaling law of granular biomass flowing on an inclined plane (Froude Number versus dimensionless thickness) forms a bi-linear trend with the turning point governed by the quasi-static and dense flow regimes; 3) the multi-regime DP-µ(I) model can capture the flow behavior in both regimes well at the cost of extra calibration. In conclusion, these findings advance the scientific understanding of the multi-regime flow behavior of granular biomass materials and shed light on formulating novel constitutive models to assist granular biomass handling in the bioenergy industry.

09 BIOMASS FUELS↗

DOE OSTI2022

Vorticity screening by dense layers

We investigate variable density layers in the presence of vortices, by analogy to line charges in the presence of a dielectric slab. We adapt solutions for dielectric layers from the literature to the variable density fluid case, obtaining exact hypergeometric expressions for flow velocities induced everywhere by a vortex in the vicinity of a finite-thickness slab of different densities. The dimensionless Atwood number, which appears naturally in other variable density phenomena, such as the Rayleigh–Taylor instability, reappears here as the natural ordering parameter for the influence of the slab, which acts primarily to screen the influence of vorticity across the slab to a lower effective circulation. The solution takes the form of scaling correction factors that might be applied to computational models or evaluated directly. Extensions, where vorticity is localized within the dense layer itself and amplified outside of it, are considered, as well as some speculative applications such as inertial confinement fusion capsule designs.

42 ENGINEERING↗

DOE OSTI2025

Spatially programmed alignment and actuation in printed liquid crystal elastomers

Liquid crystal elastomers (LCEs) exhibit reversible shape morphing behavior when cycled above their nematic-to-isotropic transition temperature. During extrusion-based 3D printing, LCE inks are subjected to coupled shear and extensional flows that can be harnessed to spatially control the alignment of their nematic director along prescribed print paths. Here, we combine experiment and modeling to elucidate the effects of ink composition, nozzle geometry, and printing parameters on director alignment. From rheological measurements, we quantify the dimensionless Weissenberg number ( Wi ) for the flow field each ink experiences as a function of printing conditions and demonstrate that Wi is a strong predictor of LCE alignment. We find that director alignment in LCE filaments printed through a tapered nozzle varies radially when Wi < 1, while it is uniform when Wi ≫ 1. Based on COMSOL simulations and in operando X-ray measurements, we show that LCE inks printed through nozzles with an internal hyperbolic geometry exhibit a more uniform director alignment for a given Wi compared to those through tapered nozzles. Concomitantly, the stiffness along the print direction and actuation strain of printed LCEs increases substantially under such conditions. By varying Wi during printing through adjusting the flow rate “on the fly”, LCE architectures with uniform composition, yet locally encoded shape morphing transitions can be realized.

36 MATERIALS SCIENCE↗

NASA NTRS1972

Optimization of self-acting step thrust bearings for load capacity and stiffness.

Linearized analysis of a finite-width rectangular step thrust bearing. Dimensionless load capacity and stiffness are expressed in terms of a Fourier cosine series. The dimensionless load capacity and stiffness were found to be a function of the dimensionless bearing number, the pad length-to-width ratio, the film thickness ratio, the step location parameter, and the feed groove parameter. The equations obtained in the analysis were verified. The assumptions imposed were substantiated by comparing the results with an existing exact solution for the infinite width bearing. A digital computer program was developed which determines optimal bearing configuration for maximum load capacity or stiffness. Simple design curves are presented. Results are shown for both compressible and incompressible lubrication. Through a parameter transformation the results are directly usable in designing optimal step sector thrust bearings.

Hamrock, B. J.↗

NASA NTRS1978

Tabulation and summary of thermodynamic effects data for developed cavitation on ogive-nosed bodies

Thermodynamic effects data for developed cavitation on zero and quarter caliber ogives in Freon 113 and water are tabulated and summarized. These data include temperature depression (delta T), flow coefficient (C sub Q), and various geometrical characteristics of the cavity. For the delta T tests, the free-stream temperature varied from 35 C to 95 C in Freon 113 and from 60 C to 125 C in water for a velocity range of 19.5 m/sec to 36.6 m/sec. Two correlations of the delta T data by the entrainment method are presented. These correlations involve different combinations of the Nusselt, Reynolds, Froude, Weber, and Peclet numbers and dimensionless cavity length.

Holl, J. W.↗