Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Differential operators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Investigating Fast Scanning Calorimetry and Differential Scanning Calorimetry as Screening Tools for Thermoset Polymer Material Compatibility with Laser-Based Powder Bed Fusion

As additive manufacturing (AM) technology has developed and progressed, a constant topic of research in the area is expanding the library of materials to be used with these techniques. Among AM methods that utilize polymers, laser-based powder bed fusion (PBF-LB) has preferentially used thermoplastic polymers as its starting materials, but the deposition and material joining method employed in PBF-LB may also be compatible with powdered thermoset polymer precursors as feedstocks. To assess the compatibility of candidate thermosetting polymers and PBF-LB, characterization techniques and protocols that link fundamental material behavior to material behavior in the processing environment are needed. Therefore, the objectives of this work are to compare the curing behavior measured with two different calorimetry techniques that can operate in different heating rate regimes, differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC), and to assess the capabilities of these techniques to act as materials screening tools for PBF-LB. A commercial polyester powder coating is used as a model material to evaluate the potential of obtaining complimentary information for material screening through a combination of calorimetry methods, and its non-isothermal curing behavior is measured at heating rates between 5 °C/min and 7500 °C/min. Curing exotherms are observed with both calorimetry techniques, and comparing the enthalpy associated with curing shows that incomplete curing occurs at higher heating rates, with relative conversion values of approximately 30%. The curing data are fit with two isoconversional models, Friedman and Starink, which show a reduced activation energy at higher heating rates as well, signifying a lower barrier to curing at the conditions used in the FSC experiments. Overall, the results of this work indicate that using these two calorimetry techniques as tiered screening tools can provide valuable information about how curing may proceed in PBF-LB and inform materials selection and design activities for additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Sparsified time-dependent Fourier neural operators for fusion simulations

This paper presents a sparsified Fourier neural operator for coupled time-dependent partial differential equations (ST-FNO) as an efficient machine learning surrogate for fluid and particle-based fusion codes such as NIMROD (Non-Ideal Magnetohydrodynamics with Rotation - Open Discussion) and GTC (Gyrokinetic Toroidal Code). ST-FNO leverages the structures in the governing equations and utilizes neural operators to represent Green's function-like numerical operators in the corresponding numerical solvers. Once trained, ST-FNO can rapidly and accurately predict dynamics in fusion devices compared with first-principle numerical algorithms. In general, ST-FNO represents an efficient and accurate machine learning surrogate for numerical simulators for multi-variable nonlinear time-dependent partial differential equations, with the proposed architectures and loss functions. The efficacy of ST-FNO has been demonstrated using quiescent H-mode simulation data from NIMROD and kink-mode simulation data from GTC. The ST-FNO H-mode results show orders of magnitude reduction in memory and central processing unit usage in comparison with the numerical solvers in NIMROD when computing fields over a selected poloidal plane. The ST-FNO kink-mode results achieve a factor of 2 reduction in the number of parameters compared to baseline FNO models without accuracy loss.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Dual-frequency (Ka-band and G-band) radar estimates of liquid water content profiles in shallow clouds

The profile of the liquid water content (LWC) in clouds provides fundamental information for understanding the internal structure of clouds, their radiative effects, propensity to precipitate, and degree of entrainment and mixing with the surrounding environment. In principle, differential absorption techniques based on coincident dual-frequency radar reflectivity observations have the potential to provide the LWC profile. Previous differential frequency radar reflectivity (DFR) efforts were challenged by the fact that the measurable differential attenuation for small quantities of LWC is usually comparable to the system measurement error. This typically renders the retrieval impractical, as the uncertainty can become many times greater than the retrieved value itself. Theoretically, this drawback can be mitigated following two interconnected approaches: (1) increasing the frequency separation between the dual-frequency radar system to measure greater differential attenuation and (2) increasing the radar operating frequency to reduce the instrument measurement random error. Our recently developed 239 GHz radar was deployed during the Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE) along with a variety of collocated remote sensing and in situ instruments. We have combined Ka-band (35 GHz) and G-band (239 GHz) observations to retrieve the LWC from more than 100 vertical profiles of shallow clouds with typical amounts of LWC smaller than 1 g m -3 . We theoretically and experimentally demonstrate that the Ka-band and G-band pair of frequencies offers at least a 65 % relative improvement in the LWC retrieval sensitivity compared to previous works reported in the literature using lower-frequency radars. This new technique provides a missing capability to determine the LWC in the challenging low liquid water path (LWP) range (< 200 g m -2 ) and suggests a way forward to characterize microphysical and dynamical processes more precisely in shallow clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Explainable and Differentiable Reinforcement Learning for Multi-objective Optimization in Particle Accelerators

Operating particle accelerators involves optimizing multiple goals simultaneously, which can be challenging due to trade-offs among objectives. While evolutionary algorithms like the genetic algorithm (GA) have been used for various Multi-Objective Optimization (MOO) tasks, they are not inherently suited for complex control problems. This talk highlights two variations of Reinforcement Learning (RL) for concurrently optimizing heat load and trip rates at the Continuous Electron Beam Accelerator Facility (CEBAF). The problem involves strict constraints on individual states, actions, and overall energy requirements of the beam. First, this talk highlights how differentiability can be harnessed through a Deep Differentiable Reinforcement Learning (DDRL) approach to address MOO issues within particle accelerators. We examine the DDRL method alongside Model Free Reinforcement Learning (MFRL), GA, and Bayesian Optimization (BO). The performance of these methods is assessed by generating a Pareto-front for two objectives. Our findings indicate that DDRL excels in handling high-dimensional problems more effectively than MFRL, BO, and GA. Next, we will show integration of explainable physics-based constraints into RL algorithms to enhance trans- parency and trust in decision-making processes by enabling users to verify that agents adhere to established physical principles. This surrogate function can be modeled using neural networks or sparse dictionary mod- els. By examining the mathematical form of the learned constraint function, we are able to confirm the agent has learned to use the established physics of each environment provided but the surrogate model. In addi- tion, we find that the introduction of a mathematical functional dictionary based surrogate model enables our reinforcement learning algorithms to reliably converge for difficult high-dimensional accelerator controls environments.

Rajput, Kishansingh [Thomas Jefferson National Acc↗
DOE OSTI2025

General signals for charged lepton flavor violating decays

We explore the most general phenomenology of charged lepton flavor violating (CLFV) decays of muon and tau leptons to the three body final states ($\bar{e}ee, \bar{μ}μμ, \bar{e}μμ, \bar{μ}μe, \bar{μ}ee, \bar{e}eμ$). By constructing a complete basis of operators at each dimension, we derive the most general amplitudes for these decay processes. By considering constraints from unitarity and Large Electron-Positron Collider (LEP), we show that operators of mass dimension 6 and 7 are the most likely to be observed in next generation experiments. Focusing on these dimensions, we compute the results of unpolarized (spin-averaged) decays parametrized in terms of the invariant masses of the daughter particles. We also compute the differential decay rates for polarized decays, in anticipation of the experimental search Mu3e, which expects to have a muon beam with ∼ 90% polarization, and the chiral Belle proposal, which aims to have a 70% polarized electron beam. To determine the extent to which the operators may be distinguished experimentally, we plot the differential distributions for each operator, showing that they leave only a few possible degenerate explanations. Through a statistical analysis, we estimate the number of events needed to break the degeneracies using the angular information. These results are adapted to treat ℓ → ℓ′⁢$v\bar{v}$, where the angular distribution of the outgoing charged lepton has enhanced distinguishing power. With many Standard Model extensions predicting these CLFV decays, these results will better enable upcoming searches to identify and/or constrain physics beyond the Standard Model.

phenomenology↗
DOE OSTI2026

A tensor train-based isogeometric solver for large-scale 3D poisson problems

We introduce a three-dimensional (3D), fully tensor train (TT) assembled isogeometric analysis (IGA) framework, TT-IGA, for solving partial differential equations (PDEs). Our method reformulates IGA discrete operators into TT format, enabling efficient compression and computation. Geometry evaluations use the original NURBS description at sampling points and TT approximation is applied to geometry-derived coefficient fields and discrete operators. We demonstrate the effectiveness of the proposed TT-IGA framework on the three-dimensional Poisson equation, achieving substantial reductions in memory and computational cost without compromising solution quality.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Spurious solar-wind effects on acceleration noise in LISA Pathfinder

Spurious solar-wind effects are a potential noise source in future Laser Interferometer Space Antenna (LISA) measurements. One noise coupling mechanism is constrained by estimating solar-wind effects on acceleration noise in LISA Pathfinder (LPF). While LISA is designed for drag-free differential measurement, predicting the realistic impact both bounds the operational environment and assesses whether LISA could provide serendipitous space-weather observations. Data from NASA's Advanced Composition Explorer (ACE), situated at the L1 Lagrange point, serves as a reliable source of solar-wind data. The data sets are compared over the 114 d time period from 1 March 2016 to 23 June 2016. This period gives the longest readily-available open data set, without interference from other commissioning activities. To evaluate space weather effects, the data from both satellites are formatted, gap-filled/interpolated, and fast-Fourier transformed for amplitude spectral density and coherence comparisons. Solar wind effects are not seen in a coherence plot between LPF and ACE; modest coherence in the planned LISA observational frequency band can be attributed to chance. This result indicates that measurable correlation due to solar-wind acceleration noise over 3 month timescales will be a negligible noise source. LISA is unlikely to inform solar wind measurements routinely. Another source of noise from the Sun, solar radiation pressure, is estimated to impart greater acceleration noise, but has yet to be analyzed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

A Flux-Tunable cavity for Dark matter detection

Developing a dark matter detector with wide mass tunability is an immensely desirable property, yet it is challenging due to maintaining strong sensitivity. Resonant cavities for dark matter detection have traditionally employed mechanical tuning, moving parts around to change electromagnetic boundary conditions. However, these cavities have proven challenging to operate in sub-Kelvin cryogenic environments due to differential thermal contraction, low heat capacities, and low thermal conductivities. Instead, we develop an electronically tunable cavity architecture by coupling a superconducting 3D microwave cavity with a DC flux tunable SQUID. With a flux delivery system engineered to maintain high coherence in the cavity, we perform a hidden-photon dark matter search below the quantum-limited threshold. A microwave photon counting technique is employed through repeated quantum non-demolition measurements using a transmon qubit. With this device, we perform a hidden-photon search and constrain the kinetic mixing angle to ${\varepsilon}< 8.2\times 10^{-15}$ in a tunable band from 5.672 GHz to 5.694 GHz. By coupling multimode tunable cavities to the transmon, wider hidden-photon searching ranges are possible.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Cryogenic Testing of HL-LHC Q1/Q3 Cryo-Assemblies at Fermilab

Fermilab is conducting horizontal cryogenic testing of Q1/Q3 Cryo-Assemblies for the high-luminosity LHC upgrade (HL-LHC). Cryo-Assemblies are installed on the upgraded Fermilab horizontal test stand previously used for testing the LHC inner triplet quadrupoles. The cryogenic process requirements of these tests include controlled cool-down and warm-up with a 100 K maximum temperature differential between the two ends of the cold mass, operation of a 1.3 bar, 1.9 K bath of subcooled superfluid helium during power testing and magnetic measurements, and operation at pressures up to 18 bar with full helium recovery after a quench. This paper presents the operational experience gained from the first tests as well as improvements for subsequent tests.

Rabehl, R. [Fermilab]↗
DOE OSTI2025

Cryogenic testing of HL-LHC Q1/Q3 cryo-assemblies at Fermilab

Fermilab is conducting horizontal cryogenic testing of Q1/Q3 cryo-assemblies for the high-luminosity LHC upgrade (HL-LHC). Cryo-assemblies are installed on the upgraded Fermilab horizontal test stand previously used for testing the LHC inner triplet quadrupoles. The cryogenic process requirements of these tests include controlled cool-down and warm-up with a 100 K maximum temperature differential between the two ends of the cold mass, operation of a 1.3 bar, 1.9 K bath of subcooled superfluid helium during power testing and magnetic measurements, and operation at pressure up to 18 bar with full helium recovery after a quench. This paper presents the operational experience gained from the first tests as well as improvement for subsequent tests.

Rabehl, R. [Fermilab] (ORCID:0000000311130030)↗
DOE OSTI2025

Active Learning of Microgrid Frequency Dynamics Using Neural Ordinary Differential Equations

Accurate frequency modelling of inverter‐based resource (IBR)‐dominated power systems is crucial for ensuring stable, reliable and resilient operations, particularly given their inherent low‐inertia characteristics and fast dynamics that traditional swing equation‐based models inadequately capture. This paper explores neural ordinary differential equations (Neural ODEs) as a computationally efficient, data‐driven framework for modelling power system frequency dynamics, specifically within microgrids integrating high penetrations of distributed energy resources (DERs). The developed neural ODEs framework incorporates a neural network architecture designed to capture input dynamics. By actively perturbing the system with a known signal, the Python‐based neural ODEs framework was trained using measured system states and inputs, without the need for detailed system information. The framework, tested on a model of the Cordova, AK, microgrid, achieved a goodness of fit ranging from 60% to 99% across different state variables and maintained a mean square error in the 10 -6 p.u. range under square and step excitation signals. The proposed approach demonstrated robustness to measurement noise and initial condition variations while maintaining low computational complexity suitable for real‐time power system control applications. Furthermore, transfer learning enabled the neural ODEs model to adapt to the following changes in system topology or generator dispatch, highlighting its effectiveness for dynamic microgrids with frequently evolving configurations and diverse DERs.

Aryal, Tara [South Dakota State Univ., Brookings, ↗
DOE OSTI2024

SUNDIALS time integrators for exascale applications with many independent systems of ordinary differential equations

Many complex systems can be accurately modeled as a set of coupled time-dependent partial differential equations (PDEs). However, solving such equations can be prohibitively expensive, easily taxing the world’s largest supercomputers. One pragmatic strategy for attacking such problems is to split the PDEs into components that can more easily be solved in isolation. This operator splitting approach is used ubiquitously across scientific domains, and in many cases leads to a set of ordinary differential equations (ODEs) that need to be solved as part of a larger “outer-loop” time-stepping approach. The SUNDIALS library provides a plethora of robust time integration algorithms for solving ODEs, and the U.S. Department of Energy Exascale Computing Project (ECP) has supported its extension to applications on exascale-capable computing hardware. In this paper, we highlight some SUNDIALS capabilities and its deployment in combustion and cosmology application codes (Pele and Nyx, respectively) where operator splitting gives rise to numerous, small ODE systems that must be solved concurrently.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Separable physics-informed DeepONet: Breaking the curse of dimensionality in physics-informed machine learning

The deep operator network (DeepONet) has shown remarkable potential in solving partial differential equations (PDEs) by mapping between infinite-dimensional function spaces using labeled datasets. However, in scenarios lacking labeled data, the physics-informed DeepONet (PI-DeepONet) approach, which utilizes the residual loss of the governing PDE to optimize the network parameters, faces significant computational challenges, particularly due to the curse of dimensionality. This limitation has hindered its application to high-dimensional problems, making even standard 3D spatial with 1D temporal problems computationally prohibitive. Additionally, the computational requirement increases exponentially with the discretization density of the domain. Here, to address these challenges and enhance scalability for high-dimensional PDEs, we introduce the Separable physics-informed DeepONet (Sep-PI-DeepONet). This framework employs a factorization technique, utilizing sub-networks for individual one-dimensional coordinates, thereby reducing the number of forward passes and the size of the Jacobian matrix required for gradient computations. By incorporating forward-mode automatic differentiation (AD), we further optimize computational efficiency, achieving linear scaling of computational cost with discretization density and dimensionality, making our approach highly suitable for high-dimensional PDEs. We demonstrate the effectiveness of Sep-PI-DeepONet through three benchmark PDE models: the viscous Burgers’ equation, Biot’s consolidation theory, and a parameterized heat equation. Our framework maintains accuracy comparable to the conventional PI-DeepONet while reducing training time by two orders of magnitude. Notably, for the heat equation solved as a 4D problem, the conventional PI-DeepONet was computationally infeasible (estimated 289.35 h), while the Sep-PI-DeepONet completed training in just 2.5 h. These results underscore the potential of Sep-PI-DeepONet in efficiently solving complex, high-dimensional PDEs, marking a significant advancement in physics-informed machine learning.

Neural operator↗
DOE OSTI2025

Distinguishing fissile uranium isotopes using an active well neutron coincidence counter

Proposed thorium-based nuclear fuel cycles are likely to require quantification and verification of 233 U within nuclear material. Because of their similar fission cross sections, active neutron nondestructive assay (NDA) systems may respond similarly to 233 U and 235 U. Traditional safeguards equipment has been optimized for 235 U and 238 U quantification associated with conventional uranium/plutonium fuel cycles and may not be directly applicable to 233 U quantification when mixed with other actinides. This work used models of the large volume active well coincidence counter (LV-AWCC) at Oak Ridge National Laboratory to evaluate the performance of this neutron NDA system to differentiate fissile uranium isotopes. The models were developed to simulate NDA system performance in response to a number of triangular radiation signature training device sources within the central cavity or well. This work predicted that the LV-AWCC can effectively differentiate 233 U from 235 U in certain modes of operation. In active mode, the LV-AWCC with the cadmium liner results in different doubles count rates between the fissile isotopes for a given fissile uranium mass. Without the cadmium liner, the uranium isotopes provide a statistically indistinguishable doubles count rate response for the fissile masses considered in this work (up to approximately 150 g). The cadmium liner serves to harden the neutron interrogation spectrum, which better exploits the notable difference in the 233 U and 235 U fission cross sections at approximately 1 eV. In passive mode, the two fissile isotopes exhibit different doubles and singles count rates regardless of liner presence because the passive source strength of 233 U is approximately 2 orders of magnitude stronger than that of 235 U due to the shorter half-life and correspondingly higher (α, n) yield. We conclude that using neutron interrogation in the LV-AWCC, two measurements are needed to quantify 233 U content in mixed uranium items. The first measurement is used to determine the total fissile uranium mass using a mode that cannot distinguish fissile isotopes (i.e., where a similar response is observed for both fissile uranium isotopes such as active doubles without cadmium or using a thermal neutron interrogation source). In conclusion, the second measurement is used to determine the 233 U content by using a differentiating technique (e.g., passive doubles, passive doubles to singles ratio, active doubles with cadmium).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Structural Design and Modeling of MARVEL Primary Coolant System Using the ASME Section III, Division 5, Code

This paper presents the structural design and supporting analysis for the Microreactor Applications Research Validation and Evaluation (MARVEL) primary coolant system (PCS) using the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code Section III, Division 5, rules. MARVEL is a liquid metal–cooled microreactor intended to provide experimental capabilities for the rapid testing and development of microreactor technologies. The PCS utilizes high-temperature sodium-potassium liquid metal as the primary coolant and operates at a design temperature of 570°C, necessitating the consideration of creep-related failure mechanisms. The base metal for the PCS is 316H stainless steel, and the weldments are made with a 16-8-2 filler. The design approach incorporates the current base code rules along with ASME code cases N-924, N-861, and N-862 to address primary load, ratcheting, and creep-fatigue evaluations, respectively. The reactor’s operation involves complex thermal and mechanical interactions due to natural convective flow and differential thermal expansion between components. In conclusion, this paper discusses the structural engineering challenges encountered, such as managing thermal stresses in the distribution plenum and guard vessel, and outlines the strategies implemented to meet the code requirements, including design modifications and operational constraints.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2025

Physics-informed latent neural operator for real-time predictions of time-dependent parametric PDEs

Deep operator network (DeepONet) has shown significant promise as surrogate models for systems governed by partial differential equations (PDEs), enabling accurate mappings between infinite-dimensional function spaces. However, when applied to systems with high-dimensional input-output mappings arising from large numbers of spatial and temporal collocation points, these models often require heavily overparameterized networks, leading to long training times. Latent DeepONet addresses some of these challenges by introducing a two-step approach: first learning a reduced latent space using a separate model, followed by operator learning within this latent space. While efficient, this method is inherently data-driven and lacks mechanisms for incorporating physical laws, limiting its robustness and generalizability in data-scarce settings. Here, in this work, we propose PI-Latent-NO, a physics-informed latent neural operator framework that integrates governing physics directly into the learning process. Our architecture features two coupled DeepONets trained end-to-end: a Latent-DeepONet that learns a low-dimensional representation of the solution, and a Reconstruction-DeepONet that maps this latent representation back to the physical space. By embedding PDE constraints into the training via automatic differentiation, our method eliminates the need for labeled training data and ensures physics-consistent predictions. The proposed framework is both memory and compute-efficient, exhibiting near-constant scaling with problem size and demonstrating significant speedups over traditional physics-informed operator models. We validate our approach on a range of parametric PDEs, showcasing its accuracy, scalability, and suitability for real-time prediction in complex physical systems.

Latent representations↗
DOE OSTI2025

Self-adaptive weights based on balanced residual decay rate for physics-informed neural networks and deep operator networks

Physics-informed deep learning has emerged as a promising alternative for solving partial differential equations. However, for complex problems, training these networks can still be challenging, often resulting in unsatisfactory accuracy and efficiency. In this work, we demonstrate that the failure of plain physics-informed neural networks arises from the significant discrepancy in the convergence rate of residuals at different training points, where the slowest convergence rate dominates the overall solution convergence. Based on these observations, we propose a pointwise adaptive weighting method that balances the residual decay rate across different training points. The performance of our proposed adaptive weighting method is compared with current state-of-the-art adaptive weighting methods on benchmark problems for both physics-informed neural networks and physics-informed deep operator networks. In conclusion, through extensive numerical results we demonstrate that our proposed approach of balanced residual decay rates offers several advantages, including bounded weights, high prediction accuracy, fast convergence rate, low training uncertainty, low computational cost, and ease of hyperparameter tuning.

Balanced convergence rate↗
DOE OSTI2025

Differentiable hybrid neural network approach for enhancing reactor dynamics simulations

Reactor dynamics simulations provide essential insights into the time-dependent behavior of nuclear reactors under various operating conditions. However, high-fidelity simulations can be computationally intensive, requiring significant computational resources. Here, to address this challenge, this study employs a differentiable hybrid model that utilizes neural networks as a corrector to enhance the performance of a low-fidelity simulation, aligning its predictions with those of a high-fidelity simulation. Low-fidelity and high-fidelity simulations were obtained by adjusting the mesh size in the System Dynamics Analysis Tool. The differentiable hybrid model was trained in two approaches: time-step-wise and sequence-wise. It was then applied to simulate various transients in a molten salt reactor. Its performance was evaluated by comparing its responses to transients against those of the high-fidelity simulation. An additional approach was performed using a data-driven model to correct the low-fidelity simulation. In comparison, the differentiable hybrid model showed significant improvements in transient prediction, effectively addressing the limitations of the low-fidelity simulations. The results highlighted the robustness of the differentiable hybrid model in both training approaches. It delivered simulations that were at least 3.8 times faster than high-fidelity models. In the time-step-wise approach, it achieved at least a 39% improvement in accuracy. In the sequence-wise approach, it showed at least an 81% accuracy improvement over the full transient. This approach offers a promising path for improving computational efficiency without compromising accuracy in nuclear reactor simulations, making it suitable for real-time digital twin applications.

42 - ENGINEERING↗