Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DTA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

A DTA/GC for the in Situ Identification of the Martian Surface Material

The composition and mineralogy of the Martian surface material remain largely unknown. To determine its composition and mineralogy, several techniques are being considered for in situ analyses of the Martian surface material during missions to Mars. We have successfully developed, constructed, and tested a laboratory DTA/GC. The DTA is a Dupont model 1600 high temperature DTA coupled with a GC equipped with a MID detector. The system is operated by a Sun Sparc 11 workstation. When gas evolves during a thermal chemical event, it is shunted into the GC and the temperature is recorded in association with the specific thermal event. We have used this laboratory instrument to define experimental criteria necessary for determining the composition and mineralogy of the Martian surface in situ (e.g., heating of sample to 1100 C to distinguish clays). Our studies indicate that DTA/GC will provide a broad spectrum of mineralogical and evolved gas data pertinent to exobiology, geochemistry, and geology.

Mancinelli, R. L.↗
NASA NTRS1994

Magnetite: What it reveals about the origin of the banded iron formations

Magnetite, Fe3O4 is produced abiotically and biotically. Abiotically, magnetite is a late magmatic mineral and forms as a consequence of the cooling of iron rich magma. Biotically, magnetite is produced by several organisms, including magnetotactic bacteria. Hematite, Fe2O3, is also produced abiotically and biotically. Abiotically, hematite rarely occurs as a primary mineral in igneous rocks, but is common as an alteration product, fumarole deposit, and in some metamorphosed Fe-rich rocks. Biotically, hematite is produced by several types of microorganisms. Biologically-produced magnetite and hematite are formed under the control of the host organism, and consequently, have characteristics not found in abiotically produced magnetite and hematite crystals. To determine if the magnetite and hematite in the Banded Iron Formation was biologically or abiotically produced, the characteristics of biologically-produced magnetite and hematite (concentrated from Aquaspirillum magnetotacticum) and abiotically-produced magnetite and hematite obtained from Wards Scientific Supply Company, were compared with characteristics of magnetite and hematite concentrated from the Gunflint Banded Iron Formation (Ontario, Canada) using thermal and crystallographic analytical techniques. Whole rock analysis of the Gunflint Banded Iron Formation by x-ray diffraction (XRD) and differential thermal analysis (DTA) revealed the presence of quartz, hematite, siderite and dolomite as the major minerals, and magnetite, greenalite, pyrite, pyrrhotite and apatite as the minor minerals. Analysis of a crude magnetic fraction of the Gunflint showed the minerals quartz, hematite, siderite, dolomite, and magnetite. Analysis of the crude magnetic fraction from Aquaspirillum magnetotacticum revealed organic compounds plus hematite and magnetite. The mineral identification and particle size distribution data obtained from the DTA along with XRD data indicate that the magnetite and hematite from the Gunflint BIF share some similarities with biologically formed magnetite and hematite.

Schwartz, D. E.↗
NASA NTRS1995

The role of silver in the processing and properties of Bi-2212

The influence of the silver content and the oxygen partial pressure on the solidus temperature and the weight loss during melting of Bi2Sr2Ca1Cu2O(x) has been examined by means of DTA and TGA. By decreasing the oxygen partial pressure the solidus is lowered (e.g. del T = 59 C by decreasing pO2 from 1 atm to 0.001 atm) and the weight loss is increased. The addition of silver causes two effects: (1) the solidus is further decreased (e.g. 2 wt% Ag lower T (solidus) by up to 25 C, depending on the oxygen partial pressure); and (2) the weight loss during melting is reduced. Thick films (10-20 micron in thickness) with 0 and 5 wt% silver and bulk samples with) and 2.7 wt% silver were melt processed in flowing oxygen on a silver substrate in the DTA, allowing the observation of the melting process and a good temperature control. The critical current densities are vigorously dependent on the maximum processing temperature. The highest j(sub c) in thick films (8000 A/sq cm at 77 K, O T) was reached by melting 7 C above the solidus temperature. The silver addition shows no significant effect on the processing parameters or the superconducting properties. The highest j(sub c) for bulk samples (1 mm in thickness) was obtained by partial melting at 900 C or 880 C, depending on the silver content of the powder (0 or 2.7 wt%). The j(sub c) of the samples is slightly enhanced from 1800 A/sq cm (at 77 K, O T) to 2000 A/sq cm by the silver addition. To be able to reach at least 80% of the maximum critical current density, the temperature has to be controlled in a window of 5 C for thick films and 17 C for bulk samples.

Lang, TH.↗
NASA NTRS1995

A Preliminary Investigation of the Cr3Si-Mo Pseudo-Binary Phase Diagram

An investigation was undertaken to study the phase relations in Cr3Si alloyed with Mo varying from 10 to 83.5 wt. % of the material. Specimens were prepared from arc-melted buttons that were subsequently heat treated at 1673 K for 200 h and air quenched to room temperature to structures. Alloys containing more than 20 wt. % MO were primarily two-phase materials of M3Si and M5Si3, where M is (Cr,Mo). Three alloys contained less than 5% of a third phase, which also had the M5Si3 crystal structure. Differential thermal analysis (DTA) was performed on several specimens at temperatures up to 2073 K in order to determine a solidus curve for the M3Si phase. Since only one DTA peak was observed in each alloy, the M5Si3 phase must melt above 2073 K, the maximum temperature examined. A preliminary pseudo-binary phase diagram for (Cr,Mo)3Si and a portion of the 1673 K isothermal section of the Cr-Mo-Si ternary phase diagram are presented.

Dickerson, R. M.↗
NASA NTRS1996

Non-Isothermal Calorimetric Studies of the Crystallization of Lithium Disilicate Glass

The influence of preannealing treatments on the polymorphic crystallization of lithium disilicate glasses is examined. As expected, glasses heated at different rates through the temperature range where there is significant nucleation develop widely different numbers of nuclei. This can dramatically influence the stability and transformation characteristics of the annealed glass. Non-isothermal differential scanning calorimetry (DSC) and differential thermal analysis (DTA) measurements are demonstrated to be useful to probe the nucleation behavior. The first systematic investigations of particle size effects on the non-isothermal transformation behavior are presented and discussed. Based on DTA and microscopy experiments, we show that small particles of lithium disilicate glasses crystallize primarily by surface crystallization. The relative importance of surface versus volume crystallization is examined by varying particle size, by introducing nucleating agents and by exposing glasses to atmospheres of different water content. These data are analyzed quantitatively using a numerical model developed in a second paper following in this volume.

Ray, C. S.↗
NASA NTRS1998

Differential Thermal Analysis of Hg(1-x)Mn(x)Te Alloys in the X=0 to 0.3 Range

Understanding the experimental conditions necessary for the development of radial and axial compositional homogeneity in directionally solidified Hg(0.89)Mn(0.11)Te(MMT) crystals has been difficult due to the lack of segregation coefficient data on the Hg(1-x)Mn(x)Te alloy system in the X = 0 to 0.3 composition range. Determining segregation coefficient data from the available Hg(1-x)Mn(x)Te alloy phase equilibria data is not practical due to discrepancies in the shape of the reported solidus and liquidus curves in the X = 0 to 0.3 range. To resolve these discrepancies and to obtain segregation coefficient data which can be used to understand homogeneity in directionally solidified MMT crystals, the solidus and liquidus temperatures of seven Hg(1-x)Mn(x)Te alloys in the X = 0 to 0.3 range were determined using differential thermal analysis (DTA). The Hg(1-x)Mn(x)Te phase diagram constructed for the X = 0 to 0.3 range of this alloy system from the DTA measurements clarifies the shape of the solidus and liquidus curves in this range. The segregation coefficient for the Hg(1-x)Mn(x)Te system was found to vary from 5 to 4.4 as the solidus composition increased from 0-30 atomic percent MnTe. This information will be useful in the analysis of axial and radial homogeneity of directionally solidified MMT crystals.

Price, M. W.↗
NASA NTRS2005

Crystallization Kinetics of a Solid Oxide Fuel Cell Seal Glass by Differential Thermal Analysis

Crystallization kinetics of a barium calcium aluminosilicate glass (BCAS), a sealant material for planar solid oxide fuel cells, have been investigated by differential thermal analysis (DTA). From variation of DTA peak maximum temperature with heating rate, the activation energy for glass crystallization was calculated to be 259 kJ/mol. Development of crystalline phases on thermal treatments of the glass at various temperatures has been followed by powder x-ray diffraction. Microstructure and chemical composition of the crystalline phases were investigated by scanning electron microscopy and energy dispersive spectroscopic (EDS) analysis. BaSiO3 and hexacelsian (BaAl2Si2O8) were the primary crystalline phases whereas monoclinic celsian (BaAl2Si2O8) and (Ba(x), Ca(y))SiO4 were also detected as minor phases. Needle-shaped BaSiO3 crystals are formed first, followed by the formation of other phases at longer times of heat treatments. The glass does not fully crystallize even after long term heat treatments at 750 to 900 C.

Bansal, Narottam P.↗
NASA NTRS2005

Mars Geochemical Instrument (MarGI): An instrument for the analysis of the Martian surface and the search for evidence of life

The Mars Geochemical Instrument, MarGI, was developed to provide a comprehensive analysis of the rocks and surface material on Mars. The instrument combines Differential Thermal Analysis (DTA) with miniature Gas Chromatography-Ion Mobility Spectrometry (GC-IMS) to identify minerals, the presence and state of water, and organic compounds. Miniature pyrolysis ovens are used to both, conduct DTA analysis of soil or crushed rocks samples, and pyrolyze the samples at temperatures up to 1000 degrees C for GC-IMS analysis of the released gases. This combination of analytical processes and techniques, which can characterize the mineralogy of the rocks and soil, and identify and quantify volatiles released during pyrolysis, has applications across a wide range of target sites including comets, planets, asteroids, and moons such as Titan and Europa. The MarGI analytical approach evolved from the Cometary Ice and Dust Experiment (CIDEX) selected to fly on the Comet Rendezvous Asteroid Flyby Mission (CRAF).

Kojiro, Daniel R.↗
NASA NTRS2018

Gas-Granular Simulation Framework for Spacecraft Landing Plume-Surface Interaction and Debris Transport Analysis

The Gas-Granular Flow Solver (GGFS) multi-phase flow computational framework has been developed to enable simulations of particle flows complex extra-terrestrial regolith materials. Particle flows of interest include the damage of unprepared landing sites from rocket plume impingement on Moon, Mars, and asteroids. The flow solver implements an Eulerian-Eulerian two-fluid model with fluid representation of the gas phase and granular phase to avoid the need to model billions of particle interactions. The granular phase is modeled as an Eulerian fluid with constituent physics closure models derived from first-principle Discrete Element Model (DEM) particle interaction simulations that capture the complex, non-linear granular particle interaction effects. Granular phase constituent models have been developed and integrated that address the complex, non-linear granular material mechanics complexities resulting from both: the irregular, jagged particle shapes and poly-disperse mixture effects encountered in extra-terrestrial regolith, with lunar regolith as the extreme. The GGFS capabilities are being integrated into a proven NASA plume-surface interaction and debris transport simulation framework featuring the Loci/CHEM CFD program and Debris Transport Analysis (DTA) post-processing tools for applications in robotic and human Moon and Mars lander development. Integration of the three simulation tool components. Loci/CHEM, GGFS, and DTA, into a coordinated simulation framework will enable time-accurate spacecraft landing simulations that account for the alteration of the landing surface through plume-induced cratering and the resulting redirection of plume impingement flow and debris transport. Initial implementation of this simulation framework and application examples will be presented.

Liever, Peter A.↗
DOE OSTI2025

INL_Intern_Poster_ColeBailey [Poster]

Understanding the thermophysical properties of molten salts is crucial for the advancement of nuclear fuels. This project presents the design of a custom differential thermal analyzer (DTA) that utilizes non-contact ultrasonic mixing to agitate samples and prevent supercooling. The supercooling effect occurs when a liquid is below its freezing point without solidifying. This can be observed when a liquid in a freezer instantly transitions to its solid phase upon disturbance. By avoiding this effect, accurate transition temperatures of molten salts can be gathered for future applications. Initial mixing results were promising, leading to further refinement of the waveguides using ABAQUS to maximize input energy into the fluid. Future work will focus on integrating both mixing and cooling in conjunctions to observe the avoided effect.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
NASA NTRS2015

Crystallization Kinetics of Calcium-magnesium Aluminosilicate (CMAS) Glass

The crystallization kinetics of a calcium-magnesium aluminosilicate (CMAS) glass with composition relevant for aerospace applications, like air-breathing engines, were evaluated using differential thermal analysis (DTA) in powder and bulk forms. Activation energy and frequency factor values for crystallization of the glass were evaluated. X-ray diffraction (XRD) was used to investigate the onset of crystallization and the phases that developed after heat treating bulk glass at temperatures ranging from 690 to 960 deg for various times. Samples annealed at temperatures below 900 deg remained amorphous, while specimens heat treated at and above 900 deg exhibited crystallinity originating at the surface. The crystalline phases were identified as wollastonite (CaSiO3) and aluminum diopside (Ca(Mg,Al) (Si,Al)2O6). Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were employed to examine the microstructure and chemical compositions of crystalline phases formed after heat treatment.

X-ray diffraction (XRD)↗
DOE OSTI2019

Correlation between Antimicrobial Activity and Bioactivity of Na-Mica and Na-Mica/Fluorapatite Glass and Glass-Ceramics and Their Corrosion Protection of Titanium in Simulated Body Fluid

The improvement in bioactivity of titanium (Ti) surface was achieved via coating it with Na-mica and Na-mica/fluorapatite glass and glass-ceramic using the low-cost electrophoretic deposition technique. Two compositions from pure Na-mica (M) and 80 Na-mica/20 fluorapatite glasses (MF) were prepared in the system SiO{sub 2}-Al{sub 2}O{sub 3}-MgO-MgF{sub 2}-Na{sub 2}O-B{sub 2}O{sub 3} using melting–quenching technique. Characterization of the as-prepared glasses and their counterpart glass-ceramics was studied using differential thermal analysis (DTA), x-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Fourier Transform-IR (FTIR) spectroscopy techniques. The bioactivity behavior was proved by studying the XRD, FTIR and SEM after immersing both glass and glass-ceramic samples in simulated body fluid (SBF). Both M and MF glasses and glass-ceramics showed high microhardness measurements and good antibacterial behavior. In vitro biodegradation was studied by using electrochemical corrosion behavior of the prepared glass- and glass-ceramic-coated Ti in SBF. The prepared coated Ti showed good corrosion resistance in SBF at 37 °C using potentiodynamic polarization technique, and the impedance data fitting explained the structure of the coating and the adsorption of SBF ions on the Ti surface. The MFGC provides the best corrosion-resistant coating, especially after sintering it.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental and computational studies of melting of the spinel phase in the Fe–Al–O ternary system

The melting behavior of spinel in the Fe–Al–O system at high temperatures (1500–1800 °C) was studied by a combination of experimental and computational investigations. Differential thermal analysis (DTA) at ultra-high temperatures coupled with cooling traces on CO 2 laser-heated levitated samples provided melting temperatures and the heats of fusion of (Fe,Al) 3 O 4 spinel phases. The experimental results are in fair agreement with the predictions using a published CALPHAD description and areas for modeling improvement are identified. New insights into the melting of defect spinel are provided.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hybrid bilayered vanadium oxide electrodes with large and tunable interlayer distances in lithium-ion batteries

The interlayer distances in layered electrode materials, influenced by the chemical composition of the confined interlayer regions, have a significant impact on their electrochemical performance. Chemical preintercalation of inorganic metal ions affects the interlayer spacing, yet expansion is limited by the hydrated ion radii. Herein, we demonstrate that using varying concentrations of decyltrimethylammonium (DTA + ) and cetyltrimethylammonium (CTA + ) cations in chemical preintercalation synthesis followed by hydrothermal treatment, the interlayer distance of hybrid bilayered vanadium oxides (BVOs) can be tuned between 11.1 Å and 35.6 Å. Our analyses reveal that these variations in interlayer spacing are due to different amounts of structural water and alkylammonium cations confined within the interlayer regions. Increased concentrations of alkylammonium cations not only expand the interlayer spacing but also induce local bending and disordering of the V-O bilayers. Electrochemical cycling of hybrid BVO electrodes in non-aqueous lithium-ion cells show that specific capacities decrease as interlayer regions expand, suggesting that the densely packed alkylammonium cations obstruct intercalation sites and hinder Li + ion transport. Furthermore, we found that greater layer separation facilitates the dissolution of active material into the electrolyte, resulting in rapid capacity decay during extended cycling. In conclusion, this study emphasizes that layered electrode materials require both spacious interlayer regions as well as high structural and chemical stabilities, providing guidelines for structural engineering of organic–inorganic hybrids.

25 ENERGY STORAGE↗
DOE OSTI2019

Structural characterization of ZnSO 4 -K 2 SO 4 -NaCl glasses

Glasses with compositions xNaCl-(50-x/2)K 2 SO 4 -(50-x/2)ZnSO 4 , x = 0 to 30 (in mol%), were characterized via vibrational spectroscopy and X-ray pair distribution function (xPDF) analysis. The xPDF's were modeled using Empirical Potential Structure Refinement (EPSR). From the modeled xPDF, the deconvoluted xPDFs were obtained along with cation-anion coordination numbers. The sulfate environment was elucidated through analysis of the vibrational spectroscopy paired with xPDFs. As determined via these techniques, the SO 4 2– oxyanions remain as distinct tetrahedra and dominate the overall structure of these ionic glasses, even with up to 30 mol% addition of NaCl. Addition of NaCl lowers the glass transition temperature (T g ) of these materials and increases the temperature between T g and the first crystallization temperature upon heating, as determined by differential thermal analysis (DTA). As a result, the composition-dependent xPDFs indicate that chloride ions are distributed equally and increasingly around Zn, K, and Na cations as x increases.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A large-scale, agent-based simulation of metropolitan freight movements with passenger and freight market interactions

This study summarizes the first stage in the implementation of an agent-based freight modeling system that has a global representation of agents and detailed modeling of a large-scale transportation network. The model is used to evaluate the transportation and energy impacts of goods movement across urban and national scales. The framework is implemented within POLARIS, a C++-based Planning and Operations Language for Agent-based Regional Integrated Simulation, which consists of an activity-based modeling (ABM) and dynamic traffic assignment (DTA) system that has robust features for passenger travel. This platform provides a tool to model interactions among consumers, producers, and the transportation system. The main objective of this initial implementation is to implement a freight model within POLARIS following an agent-based paradigm with behavioral and simulation methods. This paper presents the initial framework and illustrates the application of the model. Building upon earlier works, a parcel location assignment algorithm for business establishments in the population is documented, along with a method for estimating establishment production and consumption volumes. In addition to population generation, other features of the model include push-pull supply chains, multimodal path choice, choice of transportation logistics node, and dynamic traffic assignment. A module with e-commerce supply and demand was also developed to analyze the effects of e-commerce delivery on last-mile energy use and congestion.

agent-based freight↗
DOE OSTI2020

Formation and energetics of amorphous rare earth (RE) carbonates in the RE 2 O 3 –CO 2 –H 2 O system

Amorphous materials are of interest in the genesis of crystalline solids. They are often the first to precipitate from supersaturated solutions and are in the nanometer size range, transforming into a nanocrystalline metastable phase, and then to thermodynamically stable phases. One must seek knowledge of the composition, structure, thermodynamics, kinetics, and reaction pathways that relate the amorphous and crystalline phases. The subject of this study is the amorphous phases in the system RE 2 O 3 -CO 2 –H 2 O (RE- La, Nd, Dy,Yb). They were synthesized via direct precipitation and urea hydrolysis, and characterized by powder XRD, DTA with mass spectrometric analysis of the evolved gases. Phases have the non-stoichiometric composition RE 2 O 3 ·xCO 2 ·yH 2 O (1 < x < 3, 3 < y <7), which is different from that of crystalline simple carbonates and hydroxycarbonates. Thus we consider them to be amorphous precursors, rather than amorphous carbonates. High temperature oxide melt solution calorimetry in molten sodium molybdate solvent was used to derive their enthalpies of formation from oxides and elements. Increase of energetic stability per mole of RE 2 O 3 compounds occurs in the order: RE 2 O 3 → 2RE(OH)3→ 2REO(OH) → RE 2 O 2 CO 3 → Amorphous precursor → 2(REOHCO 3 ) → RE 2 (CO 3 ) 3 ·yH 2 O. We calculated the enthalpies of possible transformations of amorphous precursors to crystalline phases and conclude that thermodynamics determines the dependence of the crystallizing products on the temperature and partial pressure of CO 2 and H 2 O. Amorphous precursors are clearly intermediate in the synthesis, and ternary phases containing both H 2 O and CO 2 compete with each other in terms of thermodynamic stability. The energy landscape obtained here will allow one to directly synthesize specific products and control their functionality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hydrogen-Bonded Organic Frameworks: A Rising Class of Porous Molecular Materials

Hydrogen-bonded organic frameworks (HOFs) are a class of porous molecular materials that rely on the assembly of organic building blocks by means of hydrogen-bonding interactions to form two-dimensional (2D) and three-dimensional (3D) crystalline networks. The reversible nature of the hydrogen-bond formation endows HOFs with the attributes of solution processability and simple regeneration. High-quality single crystals of HOFs can be grown easily for unambiguous superstructure determination by single-crystal X-ray diffraction, which is crucial for the elucidation of superstructure–property relationships. During the past decade, considerable progress has been achieved in realizing stable HOFs with permanent porosities by focusing on the design of molecular building blocks in order to introduce rigidity, auxiliary [π···π] interactions, and interpenetration of their frameworks to sustain the extended networks. The applications of HOFs are far-reaching, spanning catalysis, energy, and biomedical products as well as the storage and separation of fine chemicals. In this paper, we, first of all, provide an overview of the chronological development of HOFs, starting from the seminal work by Marsh and Duchamp in 1969 on the crystal superstructure of the hydrogen-bonded networks of trimesic acid. We identify the development of novel hydrogen-bonding motifs such as diaminotriazine (DTA), the introduction of the concept of molecular tectonics, and the establishment of permanent porosity in HOFs as being some of the milestones, which incentivized the current burgeoning research endeavors on developing HOFs as multifunctional materials. This Account is focused primarily on surveying the strategies for constructing porous 3D HOFs based on organic building blocks with peripheral carboxyl groups. These strategies are presented in the following categories: (1) the polycatenation of 2D networks by trigonal building blocks to form global 3D frameworks, (2) the utilization of building blocks with 3D geometries—tetrahedral and trigonal prismatic—that are predisposed to form 3D networks, and (3) the docking by shape-fitting of geometrically labile building blocks. We emphasize how the molecular geometry of the building blocks plays an important role in modulating the superstructures of extended frameworks so as to address specific applications. Recognizing that the in silico design of HOFs is the ultimate goal of researchers in this field, we also discuss the recent advances in superstructure prediction that lead to the formation of porous supramolecular crystals and assess the complications in implementing computational methods for HOFs with complex superstructures. We hope this Account will inspire the development of new supramolecular designs and creative approaches to crystal engineering that aid and abet the assembly of multifunctional HOFs with customizable properties.

36 MATERIALS SCIENCE↗