Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOLOMITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Secondary Ion Mass Spectrometry Bias on Isotope Ratios in Dolomite-Ankerite, Part II: δ 13 C Matrix Effects

Here, this study is Part II of a series that documents the development of a suite of calibration reference materials for in situ SIMS analysis of stable isotope ratios in Ca-Mg-Fe carbonates. Part I explored the effects of Fe 2+ substitution on SIMS δ18O bias measured from the dolomite–ankerite solid solution series [CaMg(CO3)2–CaFe(CO 3 ) 2 ], whereas this complementary work explores the compositional dependence of SIMS δ 13 C bias (calibrated range: Fe# = 0.004–0.789, where Fe# = molar Fe/(Mg+Fe)). Under routine operating conditions for carbonate δ 13 C analysis at WiscSIMS (CAMECA IMS 1280), the magnitude of instrumental bias increased exponentially by 2.5–5.5‰ (session-specific) with increasing Fe-content in the dolomite structure, but appeared insensitive to minor Mn substitution [< 2.6 mole % Mn/(Ca+Mg+Fe+Mn)]. The compositional dependence of bias (i.e., the matrix effect) was expressed using the Hill equation, yielding calibration residual values ≤ 0.3‰ relative to CRM NBS-19 for eleven carbonate reference materials (6-μm-diameter spot size measurements). Based on the spot-to-spot repeatability of a drift monitor material that ‘bracketed’ each set of ten sample-spot analyses, the analytical precision was ± 0.6–1.2‰ (2s, standard deviations). The analytical uncertainty for individual sample analyses was approximated by combining the precision and calibration residual values (propagated in quadrature), suggesting an uncertainty of ± 1.0–1.5‰ (2s).

58 GEOSCIENCES↗

Crystallographic orientation of uniaxial calcite and dolomite determined using reflection generalized ellipsometry

In this study, using the two-modulator generalized ellipsometry microscope (2-MGEM), it is shown that it is possible to determine the direction of the optic axis of crystallites of the high birefringence materials calcite and dolomite. 2-MGEM measurements are performed in reflection at near-normal incidence, so sample preparation requires only an optically polished surface. For uniaxial materials, the 2-MGEM measures the direction of the fast axis and the diattenuation, which can then be related to the tilt angle of the optic axis with respect to the surface normal once the maximum diattenuation is known. The optical resolution of the present instrument is 4-6 μm, and areas as large as 1 cm 2 can be measured without distortion. Additionally, the 2-MGEM measures the depolarization, which is a measure of the quality of the data. Using this information, an optical pole figure can be determined. The 2-MGEM results are compared with electron backscatter diffraction (EBSD) measurements on the same samples. Lastly, additional standard spectroscopic generalized ellipsometry measurements at a large angle of incidence were performed on single crystal calcite and dolomite to determine the spectroscopic ordinary and extraordinary refractive indices from 220 nm to 850 nm from which the maximum diattenuation can be determined.

36 MATERIALS SCIENCE↗

High-pressure elastic properties of dolomite melt supporting carbonate-induced melting in deep upper mantle

Deeply subducted carbonates likely cause low-degree melting of the upper mantle and thus play an important role in the deep carbon cycle. However, direct seismic detection of carbonate-induced partial melts in the Earth’s interior is hindered by our poor knowledge on the elastic properties of carbonate melts. Here we report the first experimentally determined sound velocity and density data on dolomite melt up to 5.9 GPa and 2046 K by in-situ ultrasonic and sink-float techniques, respectively, as well as first-principles molecular dynamics simulations of dolomite melt up to 16 GPa and 3000 K. Using our new elasticity data, the calculated V P /V S ratio of the deep upper mantle (~180–330 km) with a small amount of carbonate-rich melt provides a natural explanation for the elevated V P /V S ratio of the upper mantle from global seismic observations, supporting the pervasive presence of a low-degree carbonate-rich partial melt (~0.05%) that is consistent with the volatile-induced or redox-regulated initial melting in the upper mantle as argued by petrologic studies. This carbonate-rich partial melt region implies a global average carbon (C) concentration of 80–140 ppm. by weight in the deep upper mantle source region, consistent with the mantle carbon content determined from geochemical studies.

58 GEOSCIENCES↗

The Role of Chromohalobacter on Transport of Lanthanides and Cesium in the Dolomite Mineral System

The chemical behavior of actinide series elements and fission products is a concern for the Waste Isolation Pilot Plant repository due to their uncertain mobility in the subsurface salt formation. In this work, we are observing the behavior of the halophilic bacterium, Chromohalobacter, and its effect on the mobility of lanthanides and cesium in the presence of dolomite. Batch and minicolumn experiments were conducted with Cs + and lanthanides (Nd 3+ , Eu 3+ ) to quantify potential transport with bacteria. Preliminary results show that Cs does not interact strongly with dolomite or Chromohalobacter, while the lanthanides can interact strongly with both minerals and bacteria depending on which the Ln contacts first.

54 ENVIRONMENTAL SCIENCES↗

Multispectral analysis of limestone, dolomite, and granite, Mill Creek, Oklahoma

Spectral reflectance and thermal emission data were collected at the Mill Creek, Oklahoma test site during NASA missions 132 and 133 in June 1970. The data were collected by three aircraft flown several times during the diurnal cycle at altitudes of 150 to 17,000 m above mean terrain. Reflectance of the main rock types (limestone, dolomite, and granite) was determined from the data collected using a 12-channel multispectral scanner during mission 133 and from thermal infrared images recorded during mission 132 on an RS-7 scanner from 17,000 m above terrain. A preliminary rock recognition map was generated automatically using data collected from 900 m above terrain. The discrimination provided by the map is reasonably accurate. Misidentification occurred in areas of unusually high dolomite reflectivity. High altitude thermal infrared (10 to 12 micrometers) images show regional folds and faults distinguished by the presence of thermally contrasting materials. Linear and curvilinear structural features two to three times smaller than the nominal 17 m resolution could be detected.

Rowan, L. C.↗

Self-diffusion of carbon and oxygen in dolomite.

Self-diffusion of carbon and oxygen in dolomite was measured by isotopic exchange with CO2 at 645-785 C at 120-935 bars pressure. Several runs were also made with calcite under comparable experimental conditions. The principal findings of this study are that (1) the self-diffusion coefficients of both carbon and oxygen in dolomite are approximately 100 times larger than the values in calcite over the temperature range investigated and (2) oxygen self-diffusion in calcite is accelerated by high CO2 pressure.

Anderson, T. F.↗

Stratigraphic Subdivision of the Transvaal Dolomite from ERTS imagery

ERTS imagery has revealed the presence of broad stratigraphic subdivisions in the previously undifferentiated Transvaal Dolomite of the western Tranvaal, Republic of South Africa. While detailed field mapping in areas of good outcrop, as well as borehole logging has recently led to the recognition of a stratigraphy in the Transvaal Dolomite of the central Transvaal, poor outcrop in the western Transvaal has to date prevented this. The ERTS-imagery, however, clearly reveals the presence of six, and in the far west seven, distinct stratigraphic zones extending along strike for a distance of at least 200 km. The investigation clearly demonstrates the potential applications of ERTS-imagery in geological studies, even in a country where the geology is supposedly well known.

Grootenboer, J.↗

Paleobiology of distinctive benthic microfossils from the upper Proterozoic Limestone-Dolomite "Series," central East Greenland

Populations of Polybessurus bipartitus Fairchild ex Green et al., a large morphologically distinctive microfossil, occur in silicified carbonates of the Upper Proterozoic (700-800 Ma) Limestone-Dolomite "Series," central East Greenland. Large populations of well-preserved individuals permit reconstruction of P. bipartitus as a coccoidal unicell that "jetted" upward from the sediment by the highly unidirectional secretion of extracellular mucopolysaccharide envelopes. Reproduction by baeocyte formation is inferred on the basis of clustered envelope stalks produced by small cells. Sedimentological evidence indicates that P. bipartitus formed surficial crusts locally within a shallow peritidal carbonate platform. Among living microorganisms a close morphological, reproductive, and behavioral counterpart to Polybessurus is provided by populations of an as yet underscribed cyanobacterium found in coastal Bahamian environments similar to those in which the Proterozoic fossils occur. In general morphology and "jetting" behavior, this population resembles species of the genus Cyanostylon, Geitler (1925), but reproduces via baeocyte formation. Polybessurus is but one of the more than two dozen taxa in the richly fossiliferous biota of the Limestone-Dolomite "Series." This distinctive population, along with co-occurring filamentous cyanobacteria and other microfossils, contributes to an increasingly refined picture of ecological heterogeneity in late Proterozoic oceans.

NASA Discipline Exobiology↗

Treating tar sands formations with dolomite

Methods for treating a tar sands formation are described herein. The tar sands formation may include dolomite and hydrocarbons. Methods may include providing heat at less than the decomposition temperature of dolomite from one or more heaters to at least a portion of the formation. At least some of the hydrocarbon fluids are mobilized in the formation. At least some of the hydrocarbon fluids may be produced from the formation.

04 OIL SHALES AND TAR SANDS↗

Autogenous formation and smart behaviors of nitrite- and nitrate-intercalated layered double hydroxides (LDHs) in Portland cement-metakaolin-dolomite blends

In this work, the influence of sodium nitrite (NaNO{sub 2}) and sodium nitrate (NaNO{sub 3}) corrosion inhibitors on the composition, structure, and chloride binding behaviors of layered double hydroxides (LDHs) formed in ternary ordinary Portland cement-metakaolin-dolomite (OPC-MK-DM) systems is studied. The results show that the nitrite and nitrate anions are preferably intercalated in the CaAl LDHs (AFm phases), but not in the MgAl LDHs (hydrotalcite-type phases) due to its limited formation in these ternary cementitious systems cured at ambient temperature. The autogenously formed nitrate- and nitrite-AFm phases are decomposed upon chloride exposure accompanied by Friedel's salts formation, potentially releasing corrosion inhibitive ions to the pore solution in a progressive manner. The NaNO{sub 2} and NaNO{sub 3} incorporation in ternary OPC-MK-DM binders marginally lowers chloride binding capacity but reduces its penetration resistance mainly due to pore coarsening. Nevertheless, a strong linear correlation can be established between the water-soluble and total chloride contents in ternary OPC-MK-DM systems, regardless of OPC replacement level and corrosion inhibitor incorporation.

36 MATERIALS SCIENCE↗

Evolution of Strain in Heteroepitaxial Cadmium Carbonate Overgrowths on Dolomite

The evolution and accommodation of lattice strain in an epitaxial mineral film grown on an isostructural substrate were observed as a function of film thickness. Cadmium carbonate films (approximately CdCO 3 (otavite) in composition) were grown on the (104) surface of CaMg(CO 3 ) 2 (dolomite) from aqueous solutions that were supersaturated with respect to both pure otavite and Cd-rich (Cd 1-x Ca x )CO 3 . Specular and non-specular X-ray reflectivity (XR) revealed that the structure and strain of the otavite overgrowths evolved in a manner that is fully consistent with a Stranski-Krastanov growth mode. Otavite films initially grew as coherently strained films, up to an average thickness of ~15 Å, with lateral compressive strains and an expansion of the vertical film lattice spacing resulting in a unit cell volume consistent with pure otavite. Thicker films (>15 Å) became incommensurate with the substrate, having lattice parameters that are indistinguishable from pure otavite. These results indicate that the evolution of these mineral films is controlled by epitaxy and are consistent with the growth of essentially pure otavite films. Lastly, these results provide a foundation for understanding the stability of thin-film overgrowths in the natural environment.

36 MATERIALS SCIENCE↗

A relationship between d 104 value and composition in the calcite-disordered dolomite solid-solution series

This paper is about using different concentrations of dissolved sulfide to synthesize high-Mg calcite and disordered dolomite in the Ca-Mg-carbonate solid solution series. We built a new empirical curve that correlate X-ray diffraction results with composition of the Ca-Mg-carbonate. Several linear relationships were used in carbonate mineralogy community for decades. Our new curve (not linear) integrates composition, Ca-Mg-ordering degree and inter-planar d-spacing together.

58 GEOSCIENCES↗

Study of the Reed Dolomite Aided by Remotely Sensed Imagery, Central White-Inyo Range, Easternmost California

Remote-sensing methods are of great value in assessing the stratigraphy and geologic structure of inaccessible terrains, especially where lithologic contrasts are marked. In this report, we show that such techniques can be successfully applied to a massive carbonate unit, the Reed Dolomite, exposed in the Wacuoba Mountain, Blanco Mountain, and Mount Barcroft quadrangles of east-central California.

Remote-sensing stratigraphy geology lithologic con↗

Functional activity and functional gene diversity of a Cu-contaminated soil remediated by aided phytostabilization using compost, dolomitic limestone and a mixed tree stand

Trace elements (TEs) availability, biochemical activity and functional gene diversity was studied in a Cu-contaminated soil, revegetated for six years with a mixed stand of willow, black poplar, and false indigo-bush, and amended or not with compost plus dolomitic limestone (OMDL). The OMDL amendment significantly reduced Cu and As availability and soil toxicity, and increased the biochemical activity and microbial functional diversity assessed with the GEOCHIP technique, as compared to the unamended soil (Unt). The OMDL soil showed significantly higher abundance of 25 functional genes involved in decomposition organic compounds, and 11, 3 and 11 functional genes involved in the N, P and S biogeochemical cycles. Functional gene abundance was positively correlated with nutrient contents but negatively correlated with Cu availability and soil toxicity. The abundance of microbial functional genes encoding for resistance to various TEs also increased, possibly due to the microbial proliferation and lower Cu exposure in the presence of high total soil Cu concentration. Genes encoding for antibiotic resistance due to the co-occurrence of TEs and antibiotic resistant genes on genetic mobile elements. Finally, overall, phytomanagement confirmed its potential to restore the biological fertility and diversity of a severely Cu-contaminated soil, but the increase of TEs and antibiotic resistant gene abundances deserve attention in future studies.

54 ENVIRONMENTAL SCIENCES↗

Dissolution Kinetics of Epitaxial Cadmium Carbonate Overgrowths on Dolomite

Thin films grown on mineral surfaces can immobilize toxic metals in natural systems, but the effects of epitaxy and film thickness on dissolution rates of the overgrowth are typically unknown. To explore these effects, otavite (CdCO 3 ) films were grown on dolomite (104) surfaces from aqueous solutions containing [Cd] = [Ca] = [CO 3 ] = 0.2 mM for 1–48 h and then dissolved in deionized water. Films of various thicknesses and strain states were obtained by varying the growth reaction time. Growth for up to 3 h produced strained thin films with Cd coverages of <4.3 ± 0.6 equivalent monolayers (ML) (corresponding to a thickness of up to 17 Å), whereas reaction times of up to 48 h produced thicker films with as many as 114 ± 14 equivalent ML of Cd. Intrinsic dissolution rates were measured as a function of otavite film thickness by a combination of synchrotron X-ray fluorescence, specular X-ray reflectivity, and atomic force microscopy. As a result, the initial dissolution rates for unstrained films were comparable to those reported for synthetic otavite powders, whereas the thinnest films (<3.1 ± 1.1 ML) dissolved at a 50% slower rate, indicating that epitaxial strain effectively enhanced their stability. We discuss potential reasons for this difference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of irradiation on the atomic structure and chemical durability of calcite and dolomite

When exposed to irradiation—e.g., in nuclear power plant environments—minerals may experience alterations in their atomic structure which, in turn, result in changes in their physical and chemical properties. Herein, we mimic via Ar + implantation the effects of neutron irradiation on calcite (CaCO 3 ) and dolomite (CaMg(CO 3 ) 2 ) – two carbonate minerals that often find use as aggregates in concrete: a material that is extensively used in the construction of critical structural and safety components in nuclear power plants. By a pioneering combination of nanoscale quantifications of mineral dissolution rates (i.e., a proxy for chemical durability) in alkaline solutions, vibrational (infrared and Raman) spectroscopy, and molecular simulations, we find that irradiation minimally affects the atomic structure and properties of these carbonate minerals. This insensitivity to radiation arises from the predominantly ionic nature of the interatomic bonds in these minerals which can relax and recover their initial configuration, thus ensuring minimal damage and permanent alterations to these minerals following radiation exposure. The outcomes have significant implications on the selection, use, and specification of mineral aggregates for use in nuclear concrete construction.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Distribution and diagenesis of microfossils from the lower Proterozoic Duck Creek Dolomite, Western Australia

Two distinct generations of microfossils occur in silicified carbonates from a previously undescribed locality of the Lower Proterozoic Duck Creek Dolomite, Western Australia. The earlier generation occurs in discrete organic-rich clasts and clots characterized by microquartz anhedra; it contains a variety of filamentous and coccoidal fossils in varying states of preservation. Second generation microfossils consist almost exclusively of well-preserved Gunflintia minuta filaments that drape clasts or appear to float in clear chalcedony. These filaments appear to represent an ecologically distinct assemblage that colonized a substrate containing the partially degraded remains of the first generation community. The two assemblages differ significantly in taxonomic frequency distribution from previously described Duck Creek florules. Taken together, Duck Creek microfossils exhibit a range of assemblage variability comparable to that found in other Lower Proterozoic iron formations and ferruginous carbonates. With increasing severity of post-mortem alteration, Duck Creek microfossils appear to converge morphologically on assemblages of simple microstructures described from early Archean cherts. Two new species are described: Oscillatoriopsis majuscula and O. cuboides; the former is among the largest septate filamentous fossils described from any Proterozoic formation.

NASA Discipline Number 52-30↗