Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DI&C”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Aerospace applications of sodium batteries using novel cathode materials

Preliminary fundamental investigations aimed at evaluating sodium metal chloride systems for future aerospace applications are described. Since the sodium metal chloride systems are relatively new, the approach has been to characterize their fundamental properties in order to understand their limitations. To this end, a series of fundamental electrochemical investigations have been carried out, the results of which are reported here. The metal chloride cathodes show high exchange current densities which corroborate their good reversibility in a battery application. The reduction mechanisms appear to be complex and involve multielectron transfer steps and intermediates. Such intermediates in the reaction mechanism have already been identified in the case of FeCl2. Similar mechanisms may be operative in the case of NiCl2. CuCl2, however, exhibits a second relaxation loop in the impedance plot at low frequencies and also a sloping discharge curve, unlike FeCl2 and NiCl2, which may indicate the existence of monovalent copper in the reduction mechanism.

Ratnakumar, B. V.↗

Fabrication Of Metal Chloride Cathodes By Sintering

Transition-metal chloride cathodes for use in high-temperature rechargeable sodium batteries prepared by sintering transition-metal powders mixed with sodium chloride. Need for difficult and dangerous chlorination process eliminated. Proportions of transition metal and sodium chloride in mixture adjusted to suit specific requirements. Cathodes integral to sodium/metal-chloride batteries, which have advantages over sodium/sulfur batteries including energy densities, increased safety, reduced material and thermal-management problems, and ease of operation and assembly. Being evaluated for supplying electrical power during peak demand and electric vehicles.

Bugga, Ratnakumar V.↗

Kinetics of intercalation of lithium into NbSe3 and TiS2 cathodes

Titanium disulfide and niobium triselenide are two well-studied candidate materials for positive electrodes in rechargeable lithium cells. A comparative study of the kinetics of intercalation of lithium in both the cathodes is made here based on various electrochemical techniques, i.e., linear polarization, potentiodynamic polarization, and ac impedance under different experimental conditions such as prismatic or disk configuration of fresh, partially discharged, or cycled electrode. Further, the diffusion coefficients of lithium ions in these cathodes are estimated under these conditions using conventional techniques, i.e., ac impedance, chronocoulometry, chronoamperometry, and current pulse relaxation. Based on the values of the diffusion coefficients, the applicability of these methods for the determination of diffusion coefficients is discussed.

Ratnakumar, B. V.↗

(abstract) Studies on AB(sub 5) Metal Hydride Alloys with Sn Additives

The use of metal hydrides as negative electrodes in alkaline rechargeable cells is becoming increasingly popular, due to several advantages offered by the metal hydrides over conventional anode materials (such as Zn, Cd) in terms of specific energy environmental cycle life and compatibility. Besides, the similarities in the cell voltage pressure characteristics, and charge control methods of the Ni-MH cells to the commonly used Ni-Cd point to a projected take over of 25% of the Ni-Cd market for consumer electronics by the Ni-MH cells in the next couple of years. Two classes of metal hydrides alloys based on rare earth metals (AB(sub 5)) and titanium (AB(sub 2)) are being currently developed at various laboratories. AB(sub 2) alloys exhibit higher specific energy than the AB(sub 5) alloys but the state of the art commercial Ni-MH cells are predominately manufactured using AB(sub 5) alloys.

earth metals↗

Towards Calibrating the Vestan Regolith: Correlating the Petrology, Chemistry and Spectroscopy of Howardites

The Dawn spacecraft carries a visible and infrared mapping spectrometer (VIR) [1] that has acquired spectra for the wavelength range 0.25-5.0 μm at various spatial resolutions covering much of the vestan surface [2]. Through comparison of VIR spectra with laboratory spectra of howardite, eucrite and diogenite meteorites, the distribution of more diogenite-rich and more eucrite-rich terranes on Vesta have been mapped [3], but these maps are qualitative in nature. The available laboratory spectra are not well-integrated with detailed sample petrology or composition limiting their utility for lithologic mapping. Importantly, howardites are now recognized to come in two subtypes, regolithic and fragmental [4]. The former are breccias assembled in part from true regolith, while the latter have had much less exposure to the space environment. We are attempting to develop a more quantitative basis for mapping the distribution of lithologic types on Vesta through acquiring laboratory spectra on splits of howardites that have been petrologically and chemically characterized [5]. Noble gas analyses have been done on some allowing identification of those howardites that have been exposed in the true regolith of Vesta [6].

Mittlefehldt, D. W.↗

Solar Energetic Particle Events Observed by the PAMELA Mission

Despite the significant progress achieved in recent years, the physical mechanisms underlying the origin of solar energetic particles (SEPs) are still a matter of debate. The complex nature of both particle acceleration and transport poses challenges to developing a universal picture of SEP events that encompasses both the low-energy (from tens of keV to a few hundreds of MeV)observations made by space-based instruments and the GeV particles detected by the worldwide network of neutron monitors in ground-level enhancements (GLEs). The high-precision data collected by the Payload for Antimatter Matter Exploration and Light-nuclei Astrophysics (PAMELA) satellite experiment offer a unique opportunity to study the SEP fluxes between ∼80 MeV and a few GeV, significantly improving the characterization of the most energetic events. In particular, PAMELA can measure for the first time with good accuracy the spectral features at moderate and high energies, providing important constraints for current SEP models. In addition, the PAMELA observations allow the relationship between low and high-energy particles to be investigated, enabling a clearer view of the SEP origin. No qualitative distinction between the spectral shapes of GLE, sub-GLE and non-GLE events is observed, suggesting that GLEs are not a separate class, but are the subset of a continuous distribution of SEP events that are more intense at high energies. While the spectral forms found are to be consistent with diffusive shock acceleration theory, which predicts spectral rollovers at high energies that are attributed to particles escaping the shock region during acceleration, further work is required to explore the relative influences of acceleration and transport processes on SEP spectra.

Bruno, A.↗

Thermal Rearrangements of Polybutadienes with Different Vinyl Contents

A study was made of the loss of double bonds in equibinary (1,4-1,2) polybutadiene (EB) and in polybutadienes with 30% 1,2, 70% 1,4 (FI), and 10% 1,2, 90% 1,4 (DI) double-bond content, when heated in vacuum under nonpyrolitic conditions (temperature range 220-280 C). These polymers were found to undergo second-order loss of 1,2 unsaturation with similar activation energies (E(sub a) = 34.0 +/- 3 kcal/mole), by analogy to the previously reported thermally induced loss of double bonds in 1,2-polybutadiene (VB) (E(sub a) = 33.6 +/- 3 kcal/mole). Moreover, EB and Fl exhibited also second-order loss of 1,4 unsaturation, with E(sub a) ca. 36 and 40 kcal/mole, respectively, while DI showed negligible loss of 1,4 unsaturation below 260 C, in common with cis-1,4-polybutadiene (CB) (with 2% 1,2 double bonds) examined earlier. The loss of 1,2 double bonds in the various polybutadienes with different vinyl contents is accompanied by substantial methyl production, ranging from about one methyl group formed for every 4-5 vinyl units lost in VB, to one methyl for every two vinyls lost in EB,and to almost one methyl for each vinyl lost in DI or CB. Mechanisms are proposed for the thermally induced loss of 1,2 and 1,4 unsaturation in various polybutadienes and for the accompanying methyl production.

Golub, Morton A.↗

Multiwavelength Variability and Correlation Studies of Mrk 421 During Historically Low X-ray and Y-ray Activity in 2015–2016

We report a characterization of the multiband flux variability and correlations of the nearby (z=0.031) blazar Markarian 421(Mrk 421) using data from Mets ̈ahovi, Swift, Fermi-LAT, MAGIC, FACT, and other collaborations and instruments from 2014November till 2016 June. Mrk 421 did not show any prominent flaring activity, but exhibited periods of historically low activity above 1 TeV (F>1TeV<1.7×10−12ph cm−2s−1) and in the 2–10 keV (X-ray) band (F2−10 keV<3.6×10−11erg cm−2s−1),during which the Swift-BAT data suggest an additional spectral component beyond the regular synchrotron emission. The highest flux variability occurs in X-rays and very high-energy (E>0.1 TeV)γ-rays, which, despite the low activity, show a significant positive correlation with no time lag. The HRkeV and HRTeV show the harder-when-brighter trend observed in many blazars, but the trend flattens at the highest fluxes, which suggests a change in the processes dominating the blazar variability. Enlarging our dataset with data from years 2007 to 2014, we measured a positive correlation between the optical and the GeV emission over a range of about 60 d centred at time lag zero, and a positive correlation between the optical/GeV and the radio emission over a range of about 60 d centred at a time lag of 43+9−6d. This observation is consistent with the radio-bright zone being located about 0.2 parsec downstream from the optical/GeV emission regions of the jet. The flux distributions are better described with a lognormal function in most of the energy bands probed, indicating that the variability in Mrk 421 is likely produced by a multiplicative process.

Mrk 421↗

Diversity RF receiving system with improved phase-lock characteristics

Improved diversity receiving system automatically utilizes the combined output from its two independent receiving channels /with cross- polarized receiving antennas/ to increase the reliability of maintaining the requisite phase lock for optimum signal reception. It is adapted for use with AM, PM, or narrow band FM signals.

Di Losa, V. J.↗

Ar-40-Ar-39 and Rb-Sr age determinations on Quaternary volcanic rocks

Ages of leucite and biotite separates from samples of the potassic volcanics of the Roman Comagmatic region are derived by the stepwise degassing variant of the Ar-39-Ar-40 dating method and compared with those derived from Rb-Sr dating in order to evaluate the abilities of the methods to date Quaternary geological events. Six of the leucite separates are found to contain Ar with very high bulk 40/36 ratios and to have well correlated Ar-40 and Ar-39 contents, yielding ages of approximately 338,000 years. Two leucites observed to contain Ar with lower bulk 40/36 ratios and Ar-40/Ar-36 ratios significantly lower than atmospheric are found to have ages in substantial agreement with those of the other leucites despite the uncertainty in the composition of the trapped component. Ages obtained for the biotites are not as precise as those of the leucites, due to difficulties in obtaining a good separation of in situ radiogenic Ar-40 from trapped Ar-40. Ages determined from Rb-Sr measurements for selected tuff samples are found to be in good agreement with the Ar-40-Ar-39 ages of the leucites. Results demonstrate the possibility of attaining precisions of better than 5% in the dating of rocks 350,000 years old by both the Ar-40-Ar-39 and the Rb-Sr methods.

Radicati Di Brozolo, F.↗

A two-pyroxene thermometer

Experimentally determined pyroxene phase relations at 800-1200 C are combined with calculated phase equilibria for the Di-En and Hd-Fs joins to yield a graphical two-pyroxene thermometer that should be suitable for a wide variety of rocks from the earth, the moon, and meteorites. The thermometer can be used directly with natural pyroxenes having low contents of Al and other minor components. Samples having higher contents of 'other' components require special projection onto the Ca-Mg-Fe pyroxene quadrilateral; Wo, En, and Fs as normally calculated will not yield correct temperatures. The special projection is required to approximate the activities of those components in natural pyroxenes. Whereas the effects of pressure are nonnegligible, they can be corrected for. It is pointed out that use of the thermometer for slowly cooled rocks may pose special problems if the pyroxenes have undergone granule exsolution (coalescence of exsolved material to form separate grains).

Lindsley, D. H.↗

Communications considerations of the very long baseline interferometry demonstration using the tracking and data relay satellite system

A desire for increased angular resolution at microwave frequencies has led to the development of radio telescopes with very lage effective apertures. Very long baseline interferometry (VLBI) has made it possible to synthesize telescopes with effective dimensions of a large fraction of an earth diameter. By using a satellite-borne radio telescope as part of a VLBI array, the dimensions of the earth cease to be a limitation. A demonstration was performed to show that the orbiting VLBI (OVLBI) concept is feasible. The Tracking and Data Relay Satellite System (TDRSS) was used as the orbiting element of the VLBI demonstration. Stability tests were made before the observations to determine the suitability of the TDRSS for OVLBI use. The first successful OVLBI observations were performed using the 64-m antenna observatories of NASA's Deep Space Network in Tidbinbilla, Australia, and of the Institute for Space and Astronautical Science in Usuda, Japan in conjunction with the TDRSS.

Levy, G. S.↗

Status of the very long baseline interferometry demonstration using the tracking and data relay satellite system

Very long baseline interferometry (VLBI) has been developed to the point where angular resolution at any given wavelength is limited by the dimensions of the earth. This limitation can be removed by placing a VLBI radio telescope in orbit. A demonstration of the feasibility of this approach was arranged. The Tracking and Data Relay Satellite System was used as an orbiting observatory in conjunction with the NASA Deep Space Network 64-m telescope in Tidbinbilla, Australia, and the Institute for Space and Astronautical Science 64-m antenna in Usuda, Japan. Interferometric fringes were successfully obtained from three quasars. The longest projected baseline was 1.4 earth diameters.

Levy, G. S.↗