A Rigorous Comparison of the D-Wave 2X QPU to Established B-QP Solution Methods [Slides]
This document compares the D-wave 2X QPU to other B-QP solution methods for use in optimization applications.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This document compares the D-wave 2X QPU to other B-QP solution methods for use in optimization applications.
Recent developments in the techniques of ultrafast pump-probe photoemission have made possible the search for collective modes in strongly correlated systems out of equilibrium. Including inelastic scattering processes and a retarded interaction, we simulate time- and angle-resolved photoemission spectroscopy (trARPES) to study the amplitude mode of a d-wave superconductor, a collective mode excited through the nonlinear light-matter coupling to the pump pulse. We find that the amplitude mode oscillations of the d-wave order parameter occur in phase at a single frequency that is twice the quasi-steady-state maximum gap size after pumping. As a result, we comment on the necessary conditions for detecting the amplitude mode in trARPES experiments.
Unravelling competing orders emergent in doped Mott insulators and their interplay with unconventional superconductivity is one of the major challenges in condensed matter physics. Here, to explore the possible superconducting state in a doped Mott insulator, we study the square-lattice t-J model with both the nearest-neighbor and next-nearest-neighbor electron hoppings and spin interactions. By using the state-of-the-art density matrix renormalization group calculation with imposing charge U(1) and spin SU(2) symmetries on the six-leg cylinders, we establish a quantum phase diagram including three phases: a stripe charge density wave phase, a superconducting phase without static charge order, and a superconducting phase coexistent with a weak charge stripe order. Crucially, we demonstrate that the superconducting phase has a power-law pairing correlation that decays much slower than the charge density and spin correlations, which is a quasi-1D descendant of the uniform d-wave superconductor in two dimensions. These findings reveal that enhanced charge and spin fluctuations with optimal doping is able to produce robust d-wave superconductivity in doped Mott insulators, providing a foundation for connecting theories of superconductivity to models of strongly correlated systems.
We determine the mean-field ground state of the three-dimensional rotationally symmetric d-wave (ℓ = 2) superconductor at weak coupling. It is a noninert state, invariant under the symmetry C 2 only, which breaks time-reversal symmetry almost maximally, and features a high but again less-than-maximal average magnetization. The state obtained by minimization of the expanded sixth-order Ginzburg–Landau free energy is found to be an excellent approximation to the true ground state. Here, the coupling to a parasitic s-wave component has only a minuscule quantitative and no qualitative effect on the ground state.
Abstract The possibility of using quantum computers for electronic structure calculations has opened up a promising avenue for computational chemistry. Towards this direction, numerous algorithmic advances have been made in the last five years. The potential of quantum annealers, which are the prototypes of adiabatic quantum computers, is yet to be fully explored. In this work, we demonstrate the use of a D-Wave quantum annealer for the calculation of excited electronic states of molecular systems. These simulations play an important role in a number of areas, such as photovoltaics, semiconductor technology and nanoscience. The excited states are treated using two methods, time-dependent Hartree–Fock (TDHF) and time-dependent density-functional theory (TDDFT), both within a commonly used Tamm–Dancoff approximation (TDA). The resulting TDA eigenvalue equations are solved on a D-Wave quantum annealer using the Quantum Annealer Eigensolver (QAE), developed previously. The method is shown to reproduce a typical basis set convergence on the example $$\hbox {H}_2$$ H 2 molecule and is also applied to several other molecular species. Characteristic properties such as transition dipole moments and oscillator strengths are computed as well. Three potential energy profiles for excited states are computed for $$\hbox {NH}_3$$ NH 3 as a function of the molecular geometry. Similar to previous studies, the accuracy of the method is dependent on the accuracy of the intermediate meta-heuristic software called qbsolv.
The superconducting state is formed by the condensation of Cooper pairs and protected by the superconducting gap. The pairing interaction between the two electrons of a Cooper pair determines the gap function. Thus, it is pivotal to detect the gap structure for understanding the mechanism of superconductivity. In cuprate superconductors, it has been well established that the gap may have a d-wave function. This gap function has an alternative sign change in the momentum space. It is however hard to visualize this sign change. Here we report the measurements of scanning tunneling spectroscopy in Bi 2 Sr 2 CaCu 2 O 8+δ and conduct the analysis of phase-referenced quasiparticle interference (QPI). We see the seven basic scattering vectors that connect the octet ends of the banana-shaped contour of Fermi surface. The phase-referenced QPI clearly visualizes the sign change of the d -wave gap. Lastly, our results illustrate an effective way for determining the sign change of unconventional superconductors.
Quantum chemistry is regarded to be one of the first disciplines that will be revolutionized by quantum computing. Although universal quantum computers of practical scale may be years away, various approaches are currently being pursued to solve quantum chemistry problems on near-term gate-based quantum computers and quantum annealers by developing the appropriate algorithm and software base. This work implements the general Quantum Annealer Eigensolver (QAE) algorithm to solve the molecular electronic Hamiltonian eigenvalue-eigenvector problem on a D-Wave 2000Q quantum annealer. The approach is based on the matrix formulation, efficiently uses qubit resources based on a power-of-two encoding scheme and is hardware-dominant relying on only one classically optimized parameter. We demonstrate the use of D-Wave hardware for obtaining ground and excited electronic states across a variety of small molecular systems. The approach can be adapted for use by a vast majority of electronic structure methods currently implemented in conventional quantum-chemical packages. The results of this work will encourage further development of software such as qbsolv which has promising applications in emerging quantum information processing hardware and has expectation to address large and complex optimization problems intractable for classical computers.
In the last decade, the Angle Resolved Photoemission Spectroscopy (ARPES) has achieved important advances in both energy and angular resolutions, providing a direct measurement of the single-particle dispersion relation and superconducting gap. These dispersion relation data allow a full determination of the self-energy, first and second neighbor parameters in the Hubbard model. This model and its generalizations offer a simple and general way to describe the electronic correlation in solids. In particular, the parameters of correlated hopping interactions, responsible of the d-wave superconductivity in the generalized Hubbard model, are determined from ARPES data and the critical temperature within the mean-field approximation. In this work, we determine the model parameters for Bi{sub 2}Sr{sub 2−x}La{sub x}CuO{sub 6+δ} and study its d-wave superconducting gap as a function of temperature by solving numerically two coupled integral equations. Finally, the calculated electronic specific heat is compared with experimental results.
The discovery of superconductivity in infinite-layer nickelates established another category of unconventional superconductors that shares structural and electronic similarities with cuprates. However, key issues of the superconducting pairing symmetry, gap amplitude and superconducting fluctuations are yet to be addressed. Here we utilize static and ultrafast terahertz spectroscopy to address these. We demonstrate that the equilibrium terahertz conductivity and non-equilibrium terahertz responses of an optimally Sr-doped nickelate film (superconducting transition temperature of T c = 17 K) are in line with the electrodynamics of d-wave superconductivity in the dirty limit. The gap-to-T c ratio (2Δ/k B T c ) is found to be 3.4, indicating that the superconductivity falls in the weak coupling regime. In addition, we observed substantial superconducting fluctuations near T c that do not extend into the deep normal state as the optimally hole-doped cuprates do. In conclusion, our results support a d-wave system that closely resembles the electron-doped cuprates.
We discuss a new mechanism of microwave absorption in s- and d-wave superconductors, which arises in the presence of a dc supercurrent in the system. It produces a contribution to the ac conductivity that is proportional to the inelastic quasiparticle relaxation time. This contribution also determines the supercurrent dependence of the conductivity. It may significantly exceed the conventional contribution because in typical superconductors the inelastic relaxation time is several orders of magnitude longer than the elastic one. We show that the aforementioned contribution to the conductivity may be expressed in terms of the single particle density of states in superconductors in the presence of a dc supercurrent. Our results may enable determination of the inelastic relaxation time in superconductors from microwave absorption measurements.
We show how dissipative dynamics can give rise to pairing for two-component fermions on a lattice. In particular, we construct a parent Liouvillian operator so that a BCS-type state of a given symmetry, e.g., a d-wave state, is reached for arbitrary initial states in the absence of conservative forces. The system-bath couplings describe single-particle, number-conserving and quasilocal processes. The pairing mechanism crucially relies on Fermi statistics. We show how such Liouvillians can be realized via reservoir engineering with cold atoms representing a driven dissipative dynamics.
We have recently reexamined the problem of calculating the positions and widths of the lowest-lying S- and P-state resonances in the Ps+H scattering system. The resonances are generated by bound Rydberg states in the closed rearranged channel (e(+)+H(-)), shifted somewhat by coupling with the open scattering channel. This picture had been successfully applied for S-waves, but more recent results showed unexpectedly large shifts in both P- and D-wave resonances. Our recalculation for the S- and P-waves showed that the series of resonances begins with the second Rydberg state, giving rise to an apparent large shift. Now we have extended the calculations to D states. Here we find the expected results: The 3D Rydberg state produces a resonance very close to the result of Yan and Ho, and inclusion of the 4D state gives a second resonance only slightly shifted.
Restricted Boltzmann Machine (RBM) is an energy-based, undirected graphical model. It is commonly used for unsupervised and supervised machine learning. Typically, RBM is trained using contrastive divergence (CD). However, training with CD is slow and does not estimate the exact gradient of the log-likelihood cost function. In this work, the model expectation of gradient learning for RBM has been calculated using a quantum annealer (D-Wave 2000Q), where obtaining samples is faster than Markov chain Monte Carlo (MCMC) used in CD. Training and classification results of RBM trained using quantum annealing are compared with the CD-based method. The performance of the two approaches is compared with respect to the classification accuracies, image reconstruction, and log-likelihood results. The classification accuracy results indicate comparable performances of the two methods. Image reconstruction and log-likelihood results show improved performance of the CD-based method. It is shown that the samples obtained from quantum annealer can be used to train an RBM on a 64-bit “bars and stripes” dataset with classification performance similar to an RBM trained with CD. Though training based on CD showed improved learning performance, training using a quantum annealer could be useful as it eliminates computationally expensive MCMC steps of CD.
We calculate the {pi}, {rho}, {omega}, and {gamma} coupling constants between the heavy meson doublets (1{sup -},2{sup -}) and (0{sup -},1{sup -})/(0{sup +},1{sup +}) within the framework of the light-cone QCD sum rule at the leading order of heavy quark effective theory. Most of the sum rules are stable with the variations of the Borel parameter and the continuum threshold. Then we calculate the strong and electromagnetic decay widths of the (1{sup -},2{sup -}) D-wave heavy mesons. Their total widths are around several tens of MeV, which is helpful in the future experimental search.
We revisit the evidence for quantum annealing in the D-Wave One device (DW1) based on the study of random Ising instances. Using the probability distributions of finding the ground states of such instances, previous work found agreement with both simulated quantum annealing (SQA) and a classical rotor model. Thus the DW1 ground state success probabilities are consistent with both models, and a different measure is needed to distinguish the data and the models. Here in this paper we consider measures that account for ground state degeneracy and the distributions of excited states, and present evidence that for these new measures neither SQA nor the classical rotor model correlate perfectly with the DW1 experiments. We thus provide evidence that SQA and the classical rotor model, both of which are classically efficient algorithms, do not satisfactorily explain all the DW1 data. A complete model for the DW1 remains an open problem. Using the same criteria we find that, on the other hand, SQA and the classical rotor model correlate closely with each other. To explain this we show that the rotor model can be derived as the semiclassical limit of the spin-coherent states path integral. We also find differences in which set of ground states is found by each method, though this feature is sensitive to calibration errors of the DW1 device and to simulation parameters.
We report the synthesis and magnetic characterization of WFeB and identify it as a metallic d-wave altermagnet representative of a broader TiNiSi-type family. Neutron diffraction, Mössbauer spectroscopy, and magnetometry establish a collinear altermagnetic ordering confirmed by first-principles calculations. The electronic structure shows a nonrelativistic spin splitting of approximately 100 meV, but it also supports a strong spin-splitter transport response. This demonstrates that efficient spin-current generation can occur even with such modest band splitting. Symmetry analysis shows that selected film orientations permit deterministic switching of the Néel vector by current-induced staggered torques, enabling electrical control of a perpendicular spin-splitter response. These results establish WFeB and related TiNiSi-type antiferromagnets as a platform for electrically switchable charge-to-spin conversion driven by altermagnetic symmetry.
The nature of the pairing symmetry of the first heavy fermion superconductor CeCu 2 Si 2 has recently become the subject of controversy. While CeCu 2 Si 2 was generally believed to be a d-wave superconductor, recent low-temperature specific heat measurements showed evidence for fully gapped superconductivity, contrary to the nodal behavior inferred from earlier results. Here, we report London penetration depth measurements, which also reveal fully gapped behavior at very low temperatures. To explain these seemingly conflicting results, we propose a fully gapped d + d band-mixing pairing state for CeCu 2 Si 2 , which yields very good fits to both the superfluid density and specific heat, as well as accounting for a sign change of the superconducting order parameter, as previously concluded from inelastic neutron scattering results.