Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CsCl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

49 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Magnetic terahertz resonances above the Néel temperature in the frustrated kagome antiferromagnet averievite

Time-domain magneto-THz spectroscopy is utilized to study the frustrated magnet averievite Cu 5–x Zn x V 2 O 10 (CsCl). Pronounced THz resonances are observed in unsubstituted samples (x = 0) when cooling below the onset of short-range magnetic correlations. The influence of external magnetic effects confirms the magnetic origin of these resonances. Increasing Zn substitution suppresses the resonances, as frustration effects dominate, reflecting the nonmagnetic phases for x > 0.25 compounds. The temperature evolution of the THz spectra is complemented with electron spin resonance spectroscopy. This comparison allows a direct probe of the different contributions from magnetic order, frustration, and structural properties in the phase diagram of averievite. Furthermore, our results illustrate the effect of magnetic interactions in THz spectra of frustrated magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Lattice instabilities and phonon thermal transport in TlBr

Materials with simple crystal structure usually exhibit substantial lattice thermal conductivity ( κ latt ) due to a scarcity of strong phonon-phonon scattering channels. Yet here we find simple CsCl-structure TlBr to have an extremely low room temperature κ latt ~ 0.5 W / m-K , while at low temperature we find a high κ latt of 155 W / m-K . This extreme range of conductivity behavior results from lattice-instability-related anharmonicity, effective only at temperatures above ~ 30 K . Manipulating these instabilities (e.g., pressure, strain) may yield a pathway to ultralow thermal conductivity via intrinsic phonon resistance in similar materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Influence of Ga doping on magnetic properties, magnetocaloric effect, and electronic structure of pseudobinary GdZn 1 - x Ga x ( x = 0 - 0.1 )

Here, we explore the impact of introducing IIIA-group element Ga in place of IIB-group element Zn in binary intermetallic GdZn on its magnetic and magnetocaloric properties, as well as explicate the modified electronic band structure of the compound. The magnetic transition temperature of the compound decreases with the increase of Ga concentration in GdZn 1-x ⁢Ga x ⁢(x = 0–0.1) while the crystal structure (CsCl prototype) and lattice parameters remain unchanged. Our detailed analysis of magnetization and magnetocaloric data conclusively proves that long-ranged magnetic ordering exists in the sample, despite the magnetic interaction considerably weakening with the increase of Ga. The experimental data are rationalized using both a theoretical machine-learning model and first-principle density functional theory. The electronic band structure of GdZn is manifested with some unusual complex features which gradually diminish with Ga doping and the conventional sinusoidal feature of Ruderman-Kittel-Kasuya-Yosida-type interactions also disappears. A mean-field theory model is developed and can successfully describe the overall magnetocaloric behavior of the GdZn 1-x⁢ Ga x series of samples.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In vitro evidence that the vasorelaxant effects of 2‐nitro‐1‐phenyl‐1‐propanol on rat coronary arteries involve cyclic nucleotide pathways

Abstract The synthetic nitro‐alcohol 2‐nitro‐1‐phenyl‐1‐propanol (NPP) has endothelium‐independent relaxing properties in isolated preparations of rat aorta and mesenteric artery. In this study, we investigated whether the vasodilator effects occur in coronary vessels and explored whether hyperpolarization is involved in the underlying mechanism of NPP‐induced smooth muscle relaxation. The relaxing responses were studied in isolated preparations of the left anterior descending coronary (ADC) and the septal coronary (SC) arteries, which had been previously maintained under sustained contraction induced by the thromboxane A 2 analogue U‐46619. Administered cumulatively, NPP elicited concentration‐dependent vasorelaxation with similar potency in both vessels. The relaxant effect remained unaffected by the nitric oxide synthase inhibitor L‐NAME, the protein kinase C inhibitor bisindolylmaleimide IV and the Rho‐associated protein kinase inhibitor Y‐27632. However, it was significantly diminished by the adenylyl cyclase inhibitor MDL‐12,330A, the guanylyl cyclase inhibitor ODQ, as well as the K + channel inhibitors tetraethylammonium and CsCl. In ADC preparations impaled with intracellular micropipettes, NPP hyperpolarized the vascular preparation. When the isolated preparation was precontracted by 5‐hydroxytryptamine or 80 mM KCl, NPP‐induced relaxation with lower pharmacological potency compared to the vessels contracted by U‐46619. In conclusion, NPP exhibits vasorelaxant effects on rat coronary arteries, likely involving pathways that include cyclic nucleotide production and membrane hyperpolarization.

Vasconcelos‐Silva, Alfredo Augusto↗
DOE OSTI2024

B1-B2 transition in shock-compressed MgO

Magnesium oxide (MgO) is a major component of the Earth’s mantle and is expected to play a similar role in the mantles of large rocky exoplanets. At extreme pressures, MgO transitions from the NaCl B1 crystal structure to a CsCl B2 structure, which may have implications for exoplanetary deep mantle dynamics. In this study, we constrain the phase diagram of MgO with laser-compression along the shock Hugoniot, with simultaneous measurements of crystal structure, density, pressure, and temperature. We identify the B1 to B2 phase transition between 397 and 425 gigapascal (around 9700 kelvin), in agreement with recent theory that accounts for phonon anharmonicity. From 425 to 493 gigapascal, we observe a mixed-phase region of B1 and B2 coexistence. The transformation follows the Watanabe-Tokonami-Morimoto mechanism. Our data are consistent with B2-liquid coexistence above 500 gigapascal and complete melting at 634 gigapascal. This study bridges the gap between previous theoretical and experimental studies, providing insights into the timescale of this phase transition.

58 GEOSCIENCES↗
DOE OSTI2020

Thermoelasticity Model for Lithium Fluoride

Lithium fluoride (LiF) is a typical ionic solid, and at the same time a typical polymorphic (multi-phase) material. Its phase diagram contains two solid phases, B1 (rock salt) and B2 (CsCl), which are typical of ionic solids. The phase diagram of LiF was suggested by Smirnov. We have carried out extensive study of the properties of LiF using one of the most recent versions of VASP (Vienna Ab initio Simulation Package) which allows one to carry out calculations on ionic solids; more detail will be presented elsewhere.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Evaluation of the Generation-2 Dechlorination Apparatus for Treating Salt Wastes

This document satisfies the requirements for two milestones, i.e., M2FT-21PN030103021 and M3FT-21PN030103026, which are described in detail below. Also, details for the work package at the Pacific Northwest National Laboratory (PNNL) are provided below. The goal of this milestone was to demonstrate the generation-2 dechlorination apparatus (G2DA) for removing Cl from chloride-based electrochemical salt simulants. The two salts chosen for this initial study were KCl to simulate a component from the eutectic salt (LiCl is harder to detect with analytical instruments) and CsCl to simulate a fission product chloride that might be present in these types of waste streams. The overall scope of this work included receiving, installing, and testing the G2DA. This new system was designed to address several shortcomings identified with the generation-1 apparatus (G1DA), which are described in detail within this document. The G2DA was designed to address all of these shortcomings. The studies presented in here show that the G2DA worked as intended and will help provide scaled-up batches for additional testing at Argonne National Laboratory.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

FY21 Status Report on the Molten Salt Thermal Properties Database (MSTDB) Development

This report describes the thermodynamic assessments for the ZrF 4 -BeF 2 , AlCl 3 -NaCl, AlCl3-KCl and the PuCl 3 -CsCl pseudo-binary subsystems. Calculation results are compared to the inputs used to optimize the adjustable model parameters. The data came from experimental studies reported in the open literature, from the MSR research community, and/or computational results generated within the NEAMS program and from collaborators. The models from the thermodynamic assessment of these salt systems are integrated into the MSTDB-TC (Molten Salt Thermal Properties Database-Thermochemical). A brief description of the companion MSTDB-TP (Molten Salt Thermal Properties Database-Thermophysical) is given along with an overview of the approach for predicting both thermodynamic and thermophysical property behavior of multicomponent systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

History and Future of Isotope Production

Operations at the IPF were initiated in October 1976. LAMPF was delivering 800 MeV protons at a current of 300 µA. Initially, only pure-metal targets were selected for irradiation. These included Mo, Ni, Ta, Si, V, Al and Cu, which ranged in mass from a few to several hundred g. One program required a multi-Ci quantity of 88 Y that necessitated the irradiation and processing of more than 5 kg of Mo metal. As experience was gained, it was learned that oxide and salt targets could safely be irradiated, and eventually the sweeping and cold trapping of radioxenon gas from a molten CsCl during irradiation. Operations ended in 1992.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Lower-length-scale modeling of chemical additions, corrosion and fission products in select MSR base salts

Molten salts play a crucial role in advancing Generation IV nuclear energy technology, with chloride-based salts like NaCl-UCl 3 garnering significant attention due to their distinctive properties. However, the corrosive nature of molten salts causes the dissolution of chromium (Cr), leading to the formation of CrCl 2 and CrCl 3 species in molten chlorides. Moreover, the radioactive decay of nuclear fuel gives rise to fission products, including Cs, Sr, and I chlorides. The first part of this report presents a comprehensive study utilizing ab initio molecular dynamics (AIMD) simulations to investigate the properties of eutectic NaCl-UCl 3 molten salt in the presence of corrosion products (CrCl 2 and CrCl 3 ) and fission product (CsCl). The study focuses on essential structural and thermophysical properties such as density, mixing energy, coordination numbers (CN), and Radial Distribution Functions (RDF) of the salts with varying compositions of corrosion products and fission product, covering a range from 0% to 13.5%. The results offer valuable insights into the behavior of corrosion and fission products in uranium-based molten salts, providing essential data that can be used as input to the MTDB-TC and MSTDB-TP property databases being developed by the NEAMS program. Due to their favorable characteristics such as low melting points, high boiling points, and low costs, MgCl 2 +NaCl+KCl (MNK) eutectic salts have recently attracted attention as high-temperature heat transfer fluids. The incorporation of LiCl into MNK salts can further reduce their melting points and increase their specific heat capacities, which is de- sirable for high-temperature heat transfer applications. The second part of this report presents the development and validation of a new shell-model potential for the MgCl 2 +NaCl+KCl+LiCl system, which captures the polarization of Cl anions. The extensive comparison with experimental data and AIMD simulations demonstrates the accuracy and reliability of the potential. Furthermore, using this potential, we elucidate the intricate network structure in MNK eutectic salts that is formed through polyhedron sharing. This research contributes to a fundamental understanding of the atomic structures and thermophysical properties of multi-component molten salts, which is crucial for future development of heat transfer fluids for applications in molten salt reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Melt Crystallization of CsF from Alkali Fluorides

Fractional melt-crystallization is a technique used to separate components in a multicomponent liquid mixture through controlled cooling. In fiscal year (FY) 2023, this technique was successfully used to separate CsCl from LiCl-KCl. This demonstrated a potential route for concentrating electrorefiner fission product waste streams in pyrochemical fuel cycles, building on previous work that developed the melt-crystallization system for fission product removal from LiCl-based electrolytes used for oxide reduction. This work investigated whether a thermally controlled process of a solid-liquid separation process could effectively remove CsF from LiF-NaF-KF (FLiNaK)-CsF salt for MSR fuel cycle applications. The designed process aimed to recover purified LiF-NaF-KF salt as solid precipitates while concentrating CsF to a remaining salt heel. This concentrated CsF can then be immobilized during a salt waste stream treatment operation, minimizing waste volume.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hydrochlorination of Uranium Dioxide in a Molten Salt Mixture - Phase 1: Tube Furnace Cross Flow Experiments

In 2023, Metatomic® Inc., a South Carolina based company, was awarded a Gateway for Advanced Innovation in Nuclear (GAIN) research voucher for a proposed series of experiments aimed at demonstrating the viability of a spent nuclear fuel (SNF) recycling process patented by Met atomic® Inc. For the GAIN voucher, Metatomic® Inc. selected Savannah River National Laboratory (SRNL) as a partner in executing the proposed proof-of-concept experiments. This report outlines the proof-of-concept experiments performed by SRNL for Metatomic® Inc. during Phase 1 (of 2) experimentation. The Phase 1 hydrochlorination experiments consisted of weighing UO2 into alumina crucibles with a eutectic mixture of NaCl and CsCl, heating the uranium/salt mixture to a varied temperature (550, 650, or 750 °C), and flowing anhydrous hydrogen chloride (AHCl) gas across the surface of the uranium-bearing molten salt mixture. The hydrochlorination process conditions were maintained for 4-5 hours and the percent conversion for each batch of UO2 was determined using a suite of analytical characterization techniques. The degree of UO2 conversion was found to be greatest at the highest tested temperature, ultimately achieving 32.9% conversion of UO2 to water soluble uranium-chloro species (e.g., UO2Cl2, UCl4) after exposure to AHCl for 4.25 hours at 750 °C.

Nguyen, Vinh T. [Savannah River National Laborator↗