SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A review of major ride-quality criteria used in the design of commercial helicopters, some of the limitations of these criteria, research programs conducted to better define these criteria, and some recommended research programs is presented. Primary emphasis is given to the question of noise and vibration criteria for passenger acceptance and comfort.
Wind data measured on a 444-m tower located near Oklahoma City, Oklahoma, were used to investigate the structure of wind and turbulence in the height interval from 150 m to 1 km. The structure of wind and turbulence in the layer not encompassed by the existing design criteria was researched and ways for unifying the ground and inflight criteria were investigated. Steady state vertical wind profiles, directional wind component envelopes, wind shear, wind direction change, gust factor, and turbulence spectra are encompassed. A method is proposed for the specification of steady state wind profiles and shear envelopes for use in the region between 150 m and 1 km without altering in any way the existing design criteria. The data analyzed did not indicate a need for changing the existing criteria in regards to wind direction change, gust factor, or spectra of turbulence.
A method for predicting the probable course of fire development in an enclosure is presented. This fire modeling approach uses a graphic plot of five fire development constraints, the relative energy release criteria (RERC), to bound the heat release rates in an enclosure as a function of time. The five RERC are flame spread rate, fuel surface area, ventilation, enclosure volume, and total fuel load. They may be calculated versus time based on the specified or empirical conditions describing the specific enclosure, the fuel type and load, and the ventilation. The calculation of these five criteria, using the common basis of energy release rates versus time, provides a unifying framework for the utilization of available experimental data from all phases of fire development. The plot of these criteria reveals the probable fire development envelope and indicates which fire constraint will be controlling during a criteria time period. Examples of RERC application to fire characterization and control and to hazard analysis are presented along with recommendations for the further development of the concept.
Resin selection criteria are derived using a structured methodology consisting of an upward integrated mechanistic theory and its inverse (top-down structured theory). These criteria are expressed in a 'criteria selection space' which can be used to identify resin bulk properties for improved composite 'toughness'. The resin selection criteria correlate with a variety of experimental data including laminate strength, elevated temperature effects and impact resistance.
Resin selection criteria are derived using a structured methodology consisting of an upward integrated mechanistic theory and its inverse (top-down structured theory). These criteria are expressed in a "criteria selection space" which are used to identify resin bulk properties for improved composite "toughness". The resin selection criteria correlate with a variety of experimental data including laminate strength, elevated temperature effects and impact resistance.
Transient vibration test criteria, developed for spacecraft hardware, provide a test rationale to verify the capability of the hardware to withstand the low and mid frequency transient vibration environments induced by launch vehicle events. A test method, consisting of a series of discrete frequency, limited cycle, modulated sine wave pulses, was developed to avoid the slow swept sine drawbacks, yet provide a repeatable test that would excite all frequencies. The shape of the waveform is that of the classic response of the mass of a one degree of freedom system when it is base-excited by an exponentially decayed sine wave transient. Criteria were developed to define pulse amplitudes, shapes, and center frequencies from spacecraft loads analyses. Test tolerance criteria were also developed and specified. The transient vibration test criteria were implemented on spacecraft flight hardware and provided a more realistic test simulation (i.e., less conservative) for qualification of spacecraft hardware without risk of undertest.
Design criteria have been developed for bypass diodes in p-n and Schottky barrier in photovoltaic applications. A test method for assessing conformity to the design criteria is described. Junction temperatures are defined in terms of expected worst-case field conditions, including ambient temperature and solar irradiance on the photovoltaic module. The rating criteria address the maximum allowable current and heat-sink characteristics of diodes mounted inside or outside the photovoltaic module. The method establishes worst-case module-to-diode thermal interfaces and may be adapted for laboratory or field-site experiments. A list of the design criteria is given.
Work accomplished under a series of study tasks for the Flying Qualities and Flight Control Systems Design Criteria Experiment (OFQ) of the Shuttle Orbiter Experiments Program (OEX) is summarized. The tasks involved review of applicability of existing flying quality and flight control system specification and criteria for the Shuttle; identification of potentially crucial flying quality deficiencies; dynamic modeling of the Shuttle Orbiter pilot/vehicle system in the terminal flight phases; devising a nonintrusive experimental program for extraction and identification of vehicle dynamics, pilot control strategy, and approach and landing performance metrics, and preparation of an OEX approach to produce a data archive and optimize use of the data to develop flying qualities for future space shuttle craft in general. Analytic modeling of the Orbiter's unconventional closed-loop dynamics in landing, modeling pilot control strategies, verification of vehicle dynamics and pilot control strategy from flight data, review of various existent or proposed aircraft flying quality parameters and criteria in comparison with the unique dynamic characteristics and control aspects of the Shuttle in landing; and finally a summary of conclusions and recommendations for developing flying quality criteria and design guides for future Shuttle craft.
This paper traces the evolution of gust design criteria in the U.S. particularly from the standpoint of research that was used in the substantiation for the various versions in the evolution. The mathematical models of airplanes and of atmospheric turbulence and their rationale are described. Emphasis is given to the revisions and refinements made starting in the 1920's up to the present time. The major steps, beginning with the sharp edged gust formula, are traced through the modified formula specifying ramp-platform gusts and later to one-minus-cosine gusts and finally to criteria for continuous gust analyses. The influence of aircraft design developments on design criteria development needs is also addressed. A brief summary of military criteria is included. Significant discussion is devoted to measurements that have been made, including onboard recordings, to provide an extensive data base of (1) atmospheric turbulence experienced in routine flight operations, (2) specially-instrumented research aircraft measurements to provide atmospheric characterization for various flight and meteorological conditions, and (3) comparisons of measured and calculated aircraft responses in turbulence. Some features of the instrumentation used will be depicted.
Many different failure criteria have been suggested for mixed mode delamination toughness, but few sets of mixed mode data exist that are consistent over the full mode I opening to mode II shear load range. The mixed mode bending (MMB) test was used to measure the delamination toughness of a brittle epoxy composite, a state of the art toughened epoxy composite, and a tough thermoplastic composite over the full mixed mode range. To gain insight into the different failure responses of the different materials, the delamination fracture surfaces were also examined. An evaluation of several failure criteria which have been reported in the literature was performed, and the range of responses modeled by each criterion was analyzed. A new bilinear failure criterion was analyzed. A new bilinear failure criterion was developed based on a change in the failure mechanism observed from the delamination surfaces. The different criteria were compared to the failure criterion. The failure response of the tough thermoplastic composite could be modeled well with the bilinear criterion but could also be modeled with the more simple linear failure criterion. Since the materials differed in their mixed mode failure response, mixed mode delamination testing will be needed to characterize a composite material. A critical evaluation is provided of the mixed mode failure criteria and should provide general guidance for selecting an appropriate criterion for other materials.
The NASA philosophy and criteria for the design and flight of scientific balloons are set forth and discussed. The thickness of balloon films is standardized at 20.3 microns to isolate potential film problems, and design equations are given for specific balloon parameters. Expressions are given for: flight-stress index, total required thickness, cap length, load-tape rating, and venting-duct area. The balloon design criteria were used in the design of scientific balloons under NASA auspices since 1986, and the resulting designs are shown to be 95 percent effective. These results represent a significant increase in the effectiveness of the balloons and therefore indicate that the design criteria are valuable. The criteria are applicable to four balloon volume classes in combination with seven payload ranges.
Criteria for Past Life: To be confident that any sample contains evidence of past life or biogenic activity, one must determine beyond a shadow of a doubt that certain well-established features or biomarker signatures are present in the sample. In the case of martian samples, the criteria for past life have not been established because if life existed on the planet, we have no way of knowing its detailed characteristics. Lacking independent evidence about the nature of possible past life on Mars, the scientific community must use, for the time being, the criteria established for ancient samples from the Earth: (1) Do we know the geologic context of the sample? Is it compatible with past life? (2) Do we know the age of the sample and its stratigraphic location? Are they understood enough to relate possible life to geologic history? (3) Does the sample contain evidence of cellular morphology? (4) What structural remains of colonies or communities exist within the samples? (5) Is there any evidence of biominerals showing chemical or mineral disequilibria? (6) Is there any evidence of stable isotope patterns unique to biology? (7) Are there any organic biomarkers present? (8) Are the features indigenous to the sample? For acceptance of past life in a geologic sample, essentially all of these criteria must he met.
The Global Modeling Initiative (GMI) Team developed objective criteria for model evaluation in order to identify the best representation of the stratosphere. This work created a method to quantitatively and objectively discriminate between different models. In the original GMI study, 3 different meteorological data sets were used to run an offline chemistry and transport model (CTM). Observationally-based grading criteria were derived and applied to these simulations and various aspects of stratospheric transport were evaluated; grades were assigned. Here we report on the application of the GMI evaluation criteria to CTM simulations integrated with a new assimilated wind data set and a new general circulation model (GCM) wind data set. The Finite Volume Community Climate Model (FV-CCM) is a new GCM developed at Goddard which uses the NCAR CCM physics and the Lin and Rood advection scheme. The FV-Data Assimilation System (FV-DAS) is a new data assimilation system which uses the FV-CCM as its core model. One year CTM simulations of 2.5 degrees longitude by 2 degrees latitude resolution were run for each wind data set. We present the evaluation of temperature and annual transport cycles in the lower and middle stratosphere in the two new CTM simulations. We include an evaluation of high latitude transport which was not part of the original GMI criteria. Grades for the new simulations will be compared with those assigned during the original GMT evaluations and areas of improvement will be identified.
A new set of six failure criteria for fiber reinforced polymer laminates is described. Derived from Dvorak's fracture mechanics analyses of cracked plies and from Puck's action plane concept, the physically-based criteria, denoted LaRC03, predict matrix and fiber failure accurately without requiring curve-fitting parameters. For matrix failure under transverse compression, the fracture plane is calculated by maximizing the Mohr-Coulomb effective stresses. A criterion for fiber kinking is obtained by calculating the fiber misalignment under load, and applying the matrix failure criterion in the coordinate frame of the misalignment. Fracture mechanics models of matrix cracks are used to develop a criterion for matrix in tension and to calculate the associated in-situ strengths. The LaRC03 criteria are applied to a few examples to predict failure load envelopes and to predict the failure mode for each region of the envelope. The analysis results are compared to the predictions using other available failure criteria and with experimental results. Predictions obtained with LaRC03 correlate well with the experimental results.
A set of three-dimensional failure criteria for laminated fiber-reinforced composites, denoted LaRC04, is proposed. The criteria are based on physical models for each failure mode and take into consideration non-linear matrix shear behaviour. The model for matrix compressive failure is based on the Mohr-Coulomb criterion and it predicts the fracture angle. Fiber kinking is triggered by an initial fiber misalignment angle and by the rotation of the fibers during compressive loading. The plane of fiber kinking is predicted by the model. LaRC04 consists of 6 expressions that can be used directly for design purposes. Several applications involving a broad range of load combinations are presented and compared to experimental data and other existing criteria. Predictions using LaRC04 correlate well with the experimental data, arguably better than most existing criteria. The good correlation seems to be attributable to the physical soundness of the underlying failure models.
Selecting a communications and network architecture for future manned space flight requires an evaluation of the varying goals and objectives of the program, development of communications and network architecture evaluation criteria, and assessment of critical architecture trades. This paper uses Cx Program proposed exploration activities as a guideline; lunar sortie, outpost, Mars, and flexible path options are described. A set of proposed communications network architecture criteria are proposed and described. They include: interoperability, security, reliability, and ease of automating topology changes. Finally a key set of architecture options are traded including (1) multiplexing data at a common network layer vs. at the data link layer, (2) implementing multiple network layers vs. a single network layer, and (3) the use of a particular network layer protocol, primarily IPv6 vs. Delay Tolerant Networking (DTN). In summary, the protocol options are evaluated against the proposed exploration activities and their relative performance with respect to the criteria are assessed. An architectural approach which includes (a) the capability of multiplexing at both the network layer and the data link layer and (b) a single network layer for operations at each program phase, as these solutions are best suited to respond to the widest array of program needs and meet each of the evaluation criteria.
The Spaceport Processing Systems Branch at NASA Kennedy Space Center has developed and deployed a software agent to monitor the Space Shuttle's ground processing telemetry stream. The application, the Launch Commit Criteria Monitoring Agent, increases situational awareness for system and hardware engineers during Shuttle launch countdown. The agent provides autonomous monitoring of the telemetry stream, automatically alerts system engineers when predefined criteria have been met, identifies limit warnings and violations of launch commit criteria, aids Shuttle engineers through troubleshooting procedures, and provides additional insight to verify appropriate troubleshooting of problems by contractors. The agent has successfully detected launch commit criteria warnings and violations on a simulated playback data stream. Efficiency and safety are improved through increased automation.
Approach and landing is the most common phase of flight for aviation accidents, accounting annually for approximately 65 percent of all accidents. A Flight Safety Foundation study of 16 years of runway excursions determined that 83 percent could have been avoided with a decision to go around. In other words, 54 percent of all accidents could potentially be prevented by going around. A critical industry policy designed to help prevent such accidents is the go-around policy. However, the collective industry performance of complying with go-around policies is extremely poor and only about three percent of unstable approaches result in a go-around. Improving the go-around compliance rate holds tremendous potential in reducing approach and landing accidents. There are many reasons for flight crews ignoring go-around policies related to pilot judgement and company policies. Examples are the collective industry norm to accept the noncompliance of go-around policies, management being disengaged from go-around noncompliance, and pilot fatigue and lack of situational awareness. One of the biggest factors is that pilots see current stabilized-approach criteria as too complex and restrictive for the operational environment. Following the American Airlines 1420 accident (Little Rock, 1999), where the aircraft overran the runway upon landing and crashed, the National Transportation Safety Board (NTSB) recommended that the Federal Aviation Administration (FAA) define detailed parameters for a stabilized approach, and develop detailed criteria indicating when a go-around should be performed. The experiment discussed in this presentation is the first step towards developing these go-around criteria for commercial transport aircraft.