Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Contributor ORCID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Impact of toroidal rotation on the resistive ballooning modes in ASDEX Upgrade tokamak

Abstract In this work, we investigate the behavior of instabilities appearing between type-I edge localized modes (ELMs), with increasing neutral beam injection (NBI) power concomitant increase in toroidal rotation, and compare it to the modeling result of the linear magneto-hydrodynamic (MHD) code CASTOR3D. An injection of one NBI beam, increasing toroidal rotation, results in the mode slowing down from 12 kHz to 7 kHz, and its associated radial displacement decreases from 5 mm to 3.5 mm. In addition, modes shift radially outwards towards higher q , decreasing their poloidal mode numbers. The mode velocity is measured to be close to the E × B velocity with significant uncertainties. Through a set of CASTOR3D simulations with varying profiles, resistivity has been identified as the primary contributor to the growth rates. Only a small stabilizing effect due to toroidal rotation has been observed. While experimental results show a decrease of mode frequency with rotation, the opposite trend is observed in modeling. Reasons for discrepancies between modeling and experiment are discussed. Nevertheless, a main contributor to the mode frequency has been identified to be rotation velocity. CASTOR3D classifies modes as resistive ballooning modes as they do not appear unstable in ideal MHD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

RegularizedOptimization.jl: A Julia framework for regularized and nonsmooth optimization

RegularizedOptimization.jl is a Julia package that implements families of quadratic regularization and trust-region methods for solving the nonsmooth optimization problem $^{\textrm{minimize}}_{𝑥∈ℝ^𝑛}$ 𝑓(𝑥) + ℎ(𝑥) subject to 𝑐(𝑥) = 0, (1) where 𝑓 ∶ ℝ 𝑛 → ℝ and 𝑐 ∶ ℝ 𝑛 → ℝ 𝑚 are continuously differentiable, and ℎ ∶ ℝ 𝑛 → ℝ∪{+∞} is lower semi-continuous. The nonsmooth objective ℎ can be a regularizer, such as a sparsity inducing penalty, model simple constraints, such as 𝑥 belonging to a simple convex set, or can be a combination of both. All 𝑓, ℎ, and 𝑐 can be nonconvex. RegularizedOptimization.jl provides a modular and extensible framework for solving (1), and developing novel solvers. Currently, the following solvers are implemented: • Trust-region solvers TR and TRDH (Aravkin et al., 2022; Leconte & Orban, 2025) • Quadratic regularization solvers R2, R2DH and R2N (Aravkin et al., 2022; Diouane, Habiboullah, et al., 2024) • Levenberg-Marquardt solvers LM and LMTR (Aravkin et al., 2024) used when 𝑓 is a least-squares residual. • Augmented Lagrangian solver AL (De Marchi et al., 2023). All solvers rely on first derivatives of 𝑓 and 𝑐, and optionally on their second derivatives in the form of Hessian-vector products. If second derivatives are not available, quasi-Newton approximations can be used. In addition, the proximal mapping of the nonsmooth part ℎ, or adequate models thereof, must be evaluated. At each iteration, a step is computed by solving a subproblem of the form (1) inexactly, in which 𝑓, ℎ, and 𝑐 are replaced with appropriate models around the current iterate. The solvers R2, R2DH, and TRDH are particularly well suited to solve the subproblems, though they are general enough to solve (1). All solvers are allocation-free, so re-solves incur no additional allocations. To illustrate our claim of extensibility, a first version of the AL solver was implemented by an external contributor. Furthermore, a nonsmooth penalty approach, described in Diouane, Gollier, et al. (2024), is currently being developed, that relies on the library to efficiently solve the subproblems.

Gollier, Maxence [Polytechnique Montréal, QC (Cana↗
DOE OSTI2024

Exploring the relationship between deposition method, microstructure, and performance of Nb/Si-based superconducting coplanar waveguide resonators

Superconducting quantum circuits (SQC) are one of the most promising hardware platforms for quantum computing, yet their performance is currently limited by the presence of various structural defects inside the circuit's structure. Despite impressive progress in the past decade, a precise understanding of the origin of these defects from various fabrication processes and their impact on coherence is still lacking. Here, in this study, we performed a comprehensive investigation on the microstructure, superconductivity, and resonator quality factor of Nb films deposited by high-power impulse magnetron sputtering (HiPIMS) and direct current (DC) magnetron sputtering. A suite of characterization techniques, including electron microscopy with spectroscopy, secondary ion mass spectrometry, magneto-optical microscopy, and pump-probe reflectivity spectroscopy is used. We reveal that niobium (Nb) resonators fabricated using HiPIMS exhibit a smaller average grain size, thicker surface oxide with larger thickness variations (rougher surface), and a thicker amorphous Nb/Si interface layer compared to samples deposited by DC sputtering. We identified that the amorphous Nb oxides (mainly located at the Nb surface and along the grain boundaries) and Nb-Si amorphous layers (at the Nb/Si interface) are major and potential sources of two-level system (TLS), while off-stochiometric oxides and suboxides of Nb close to the surface, crystalline defects (i.e., dislocations at grain boundary, point defects introduced during deposition) are main contributors of non-TLS sources. Our findings clarify the relationship between different defects and coherence loss mechanisms, highlighting the importance of material microstructure control on performance optimization in SQC.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Correlating Protein Dynamics and Catalytic Activity of a Model Hydrogenase Using Paramagnetic and Biological Nuclear Magnetic Resonance Spectroscopy

Rational catalyst design remains a significant challenge, with electronic structure, steric, and electrostatic effects known to contribute to activity. Recently, dynamics has been recognized as another factor that impacts catalysis, though identifying and predicting these effects has remained out of reach. Nickel-substituted rubredoxin (NiRd), a protein-based mimic of a hydrogenase enzyme, serves as a model catalytic system in which dynamics can be systematically investigated with respect to activity. While over 30 secondary-sphere mutants of NiRd have been shown to be catalytically active, no significant correlation was observed between the rates and catalytic overpotential or electronic structure, prompting questions about the protein-derived factors that modulate activity. Here, in this work, NMR spectroscopy was used to investigate the roles of substrate accessibility, protein dynamics, and protein stability in controlling catalysis. Significant paramagnetic effects from the nickel center (S = 1) isolate the methylene proton resonances of the metal-coordinating cysteine residues. The sensitivity of resonance positions and linewidths to local environment offers an opportunity to study dynamical molecular changes around the metal center with high resolution. Machine learning algorithms were employed to identify correlations between the catalytic activity and the paramagnetic NMR spectra. These analyses revealed spectroscopic features of specific cysteine protons that report on catalytic overpotential and increased turnover rates, which are further supported by the results obtained using high-field NMR techniques. Collectively, these studies indicate the potential for multifrequency NMR techniques to resolve key contributors to catalytic activity and highlight the importance of local and outer-sphere dynamics.

Protein Engineering↗
DOE OSTI2025

Greenhouse Gas Emissions Associated with Pretreatment Techniques Utilized for Biosugar Production

Less carbon-intensive production of biosugars from lignocellulosic materials can lead to improved manufacturing of biofuels and bioproducts. In this study, the production of biosugars is analyzed to understand the potential of producing bioproducts from biosugars with a low carbon intensity. Life-cycle assessment is conducted on five lignocellulosic feedstocks along with seven pretreatment techniques to produce biosugars as an important platform intermediate for producing bioproducts. The production of electricity using lignin with and without heat integration was also incorporated. In addition, seven bioproducts are analyzed for the estimation of the GHG emissions budget, which represents the emissions available to convert, separate, and upgrade biosugars into bioproducts within the 70% emissions reduction target. Corn stover-deacetylation and dilute acid pretreatment (CS-DDA) provide the lowest GHG emissions for biosugar (0.03 kg CO 2 eq/kg biosugar) and thereby the highest GHG emissions budget for the case of lactic acid production (3.76 kg CO 2 eq/kg lactic acid). Natural gas and chemicals are the major contributors to all of the pretreatment techniques under study. The outcomes from this study can benefit the advancement of upcoming biobased processes that meet decarbonization targets.

Biopolymers↗
DOE OSTI2022

Efficient and interpretable graph network representation for angle-dependent properties applied to optical spectroscopy

Abstract Graph neural networks are attractive for learning properties of atomic structures thanks to their intuitive graph encoding of atoms and bonds. However, conventional encoding does not include angular information, which is critical for describing atomic arrangements in disordered systems. In this work, we extend the recently proposed ALIGNN (Atomistic Line Graph Neural Network) encoding, which incorporates bond angles, to also include dihedral angles (ALIGNN-d). This simple extension leads to a memory-efficient graph representation that captures the complete geometry of atomic structures. ALIGNN-d is applied to predict the infrared optical response of dynamically disordered Cu(II) aqua complexes, leveraging the intrinsic interpretability to elucidate the relative contributions of individual structural components. Bond and dihedral angles are found to be critical contributors to the fine structure of the absorption response, with distortions that represent transitions between more common geometries exhibiting the strongest absorption intensity. Future directions for further development of ALIGNN-d are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Decoupling first-cycle capacity loss mechanisms in sulfide solid-state batteries

Solid-state batteries (SSBs) promise more energy-dense storage than liquid electrolyte lithium-ion batteries (LIBs). However, first-cycle capacity loss is higher in SSBs than in LIBs due to interfacial reactions. The chemical evolution of key interfaces in SSBs has been extensively characterized. Electrochemically, however, we lack a versatile strategy for quantifying the reversibility of solid electrolyte (SE) redox for established and next-generation SSB electrolytes. In this work, we perform tailored electrochemical tests and operando X-ray diffraction to disentangle reversible and irreversible sources of capacity loss in positive electrodes composed of Li 6 PS 5 Cl SE, Li(Ni 0.5 Mn 0.3 Co 0.2 )O 2 (NMC), and carbon conductive additives. We leverage an atypically low voltage cutoff (2.0 V vs. Li/Li + ) to quantify the reversibility of SE redox. Using slow (5.5 mA g NMC −1 ) cycling paired with >100 h low-voltage holds, our cells achieve a surprising 96.2% first-cycle coulombic efficiency, which is higher than previously reported (mean: 72%, maximum: 91.6% across surveyed literature). We clarify that sluggish NMC relithiation kinetics have been historically mistaken for permanently irreversible capacity loss. In conclusion, through systematic decoupling of loss mechanisms, we uncover the unexpected reversibility of SE redox and isolate the major contributors to capacity loss, outlining a strategy for accurate assessment of next-generation SE materials and interface modifications.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Atomistic simulations for investigation of substrate and salt effects on lipid in-source fragmentation in secondary ion mass spectrometry: A follow-up study

In-source fragmentation (ISF) poses a significant challenge in secondary ion mass spectrometry (SIMS). These fragment ions increase the spectral complexity and can lead to incorrect annotation of fragments as intact species. The presence of salt that is ubiquitous in biological samples can influence the fragmentation and ionization of analytes in a significant manner, but their influences on SIMS have not been well characterized. To elucidate the effect of substrates and salt on ISF in SIMS, we have employed experimental SIMS in combination with atomistic simulations of a sphingolipid on a gold surface with various NaCl concentrations as a model system. Our results revealed that a combination of bond dissociation energy and binding energy between N-palmitoyl-sphingomyelin and a gold surface is a good predictor of fragment ion intensities in the absence of salt. However, ion-fragment interactions play a significant role in determining fragment yields in the presence of salt. Additionally, the charge distribution on fragment species may be a major contributor to the varying effects of salt on fragmentation. This study demonstrates that atomistic modeling can help predict ionization potential when salts are present, providing insights for more accurate interpretations of complex biological spectra.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

ORNL Package Testing Program Overview

Radioactive materials are widespread in our everyday activities which are used in many different types of industries: Consumer products, Medicine, Industry, Energy, and Defense. In the United States there is about 3 million shipments of radioactive materials per year. With radioactive material being very widespread the number of new applications to ship these quantities increases daily. As such, ensuring the safe and secure transport of these materials is paramount, necessitating stringent packaging, transportation, and certification requirements. Shipments of radioactive materials have been made from Oak Ridge National Laboratory (ORNL) for the past 65 years. Since the 1940s ORNL has been at the forefront of the early development of regulations pertaining to the transport of radioactive shipments and associated regulatory testing. The early involvement resulted in ORNL being one of the leaders in the development of regulations and testing standards pertaining to the testing and design of packages. Today all package testing activities are conducted under the Package Testing Program (PTP) at ORNL at the Package Evaluation Facility (PEF). The PTP develops and evaluates testing solutions – ensuring that they are safe, efficient, and meet regulatory requirements ORNL PTP has extensive experience in the regulatory testing of radioactive material packages, supporting certification of Type A, Type, B, Type AF, and special form packages. The PEF serves as a one-stop-shop for design, testing, and certification of a wide variety of packages needed for shipment of radioactive materials. The facility provides the space, expertise, and equipment necessary to conduct rigorous performance testing under both normal and accident conditions or transport environments including free drop, dynamic crush, puncture, penetration, compression, vibration, water spray, water immersion, and thermal test. The PTP remains a key contributor to the safety and compliance of radioactive material transportation. This presentation will provide an overview of the program’s history, capabilities, and its ongoing role in advancing regulatory standards and transportation safety.

Martinez, Oscar [ORNL] (ORCID:0000000181814046)↗
DOE OSTI2021

Protist diversity and community complexity in the rhizosphere of switchgrass are dynamic as plants develop

Abstract Background Despite their widespread distribution and ecological importance, protists remain one of the least understood components of the soil and rhizosphere microbiome. Knowledge of the roles that protists play in stimulating organic matter decomposition and shaping microbiome dynamics continues to grow, but there remains a need to understand the extent to which biological and environmental factors mediate protist community assembly and dynamics. We hypothesize that protists communities are filtered by the influence of plants on their rhizosphere biological and physicochemical environment, resulting in patterns of protist diversity and composition that mirror previously observed diversity and successional dynamics in rhizosphere bacterial communities. Results We analyzed protist communities associated with the rhizosphere and bulk soil of switchgrass (SG) plants ( Panicum virgatum ) at different phenological stages, grown in two marginal soils as part of a large-scale field experiment. Our results reveal that the diversity of protists is lower in rhizosphere than bulk soils, and that temporal variations depend on soil properties but are less pronounced in rhizosphere soil. Patterns of significantly prevalent protists groups in the rhizosphere suggest that most protists play varied ecological roles across plant growth stages and that some plant pathogenic protists and protists with omnivorous diets reoccur over time in the rhizosphere. We found that protist co-occurrence network dynamics are more complex in the rhizosphere compared to bulk soil. A phylogenetic bin-based null model analysis showed that protists’ community assembly in our study sites is mainly controlled by homogenous selection and dispersal limitation, with stronger selection in rhizosphere than bulk soil as SG grew and senesced. Conclusions We demonstrate that environmental filtering is a dominant determinant of overall protist community properties and that at the rhizosphere level, plant control on the physical and biological environment is a critical driver of protist community composition and dynamics. Since protists are key contributors to plant nutrient availability and bacterial community composition and abundance, mapping and understanding their patterns in rhizosphere soil is foundational to understanding the ecology of the root-microbe-soil system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Diode laser pumps for future inertial fusion energy systems: status and perspectives

Diode laser pumps are a critical enabling technology for inertial fusion energy (IFE), and will remain the largest contributor to facility cost, even assuming tenfold cost-reduction at high volumes. An overview of diode requirements for IFE and a technology path to achieve them are presented.

Engineering - Electronic and electrical engineerin↗
DOE OSTI2025

Predictive turbulence-driven flux model of scrape-off layer widths across confinement regimes in tokamaks

Reliable scrape-off layer (SOL) profile decay lengths predictions are needed to design and operate future tokamaks. The present manuscript describes a new model based on turbulent transport that is able to predict SOL widths for both L-mode and H-mode plasmas. The model is based upon the sheared-spectral filament paradigm (Peret et al (WEST Team) 2022 Phys. Plasmas 29 072306), however, incorporating the effects of thermal transport in order to calculate the parallel heat fluxes. The effects of magnetic shear and ExB shear on the cross-field transport are crucial to explain the shorter SOL decay lengths found in H-mode. The model is validated against a database of thousands of DIII-D L-mode and H-mode SOL profiles. We also calculate SOL decay length predictions in terms of plasma and engineer control parameters, which are in agreement with the multi-machine empirical H-mode scaling (Eich et al (ASDEX Upgrade Team and JET EFDA Contributors) 2013 Nucl. Fusion 53 093031), however, with an additional device geometry dependence. ITER SOL width predictions by the model are 3 times higher than the empirical scaling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Component-Level Analysis of Heating and Cooling Loads in the U.S. Residential Building Stock

The residential building sector accounts for a substantial portion of total energy consumption in the United States and offers a significant opportunity for energy reduction and decarbonization through improvements in energy efficiency. Heating and air conditioning are the primary contributors to residential energy usage and electricity system peak demand. However, due to the diversity of the housing stock and the complexity of factors affecting heating and cooling demand, identifying the relative contributions to heating and cooling loads poses challenges. To address this, we applied the ResStock analysis tool to simulate 550,000 building energy models, providing statistical representation of residential buildings in the contiguous United States. We introduced outputs that quantified the heating and cooling influence of different components of a home, such as air leakage, envelope components (ceilings, walls, windows, foundations), internal heat gains from people, lighting, plug loads, and duct losses and gains. Leveraging the granularity of ResStock, we present a dataset to enable deeper understanding of the contributors to heating and cooling loads as a function of housing characteristics such as location, envelope efficiency, and building type. This work aims to support prioritization of research and development and informed decision-making for residential building decarbonization.

building simulation↗
DOE OSTI2026

Defect formation and transmutation behaviors in irradiated tungsten under thermal-neutron shielded and mixed spectrum conditions

Here, this study investigates the microstructural evolution of pure tungsten irradiated under thermal-neutron shielded and mixed spectrum conditions in the High Flux Isotope Reactor (HFIR). Four samples were irradiated at temperatures from 570 °C to 1130 °C up to 0.73 dpa. Neutron spectrum significantly influenced the accumulation of transmutation products, with Re+Os content estimated at ∼0.3–0.6% under thermal-neutron shielded conditions and ∼5.2% under the mixed spectrum condition. Irradiation temperature strongly influences tungsten’s microstructure, with dislocation loops and fine voids forming at lower temperatures and only larger voids and Re/Os segregation observed at higher temperature. Under thermal-neutron shielded conditions, dislocation loops and voids were observed at 570 °C and 790 °C. At the highest irradiation temperature (1130 °C), dislocation loops were no longer observed, while larger but less dense voids remained. Re and Os segregation to void surfaces was evident at 790 °C and 1130 °C, though no precipitation was observed. In contrast, under the mixed-spectrum condition, both spherical and needle-like Re/Os-rich precipitates were observed, frequently accompanied by large voids. Dislocation loops were not observed, but loop-like contrast within the precipitates suggests they may have nucleated on pre-existing loops. Irradiation-induced hardening was assessed for the shielded samples at 570 °C and 790 °C. Dispersed barrier hardening (DBH) analysis, based on TEM-resolved defects, revealed that voids were the dominant contributors to hardening, consistent with literature results. A schematic model is proposed to describe defect and precipitate evolution in tungsten under fusion-relevant transmutation-to-dpa conditions.

Dislocation loops↗
DOE OSTI2025

Correction to “Self-Assembly of Accumulated Sphingolipids into Cytotoxic Fibrils in Globoid Cell Leukodystrophy and Their Inhibition by Small Molecules in Vitro”

Dr. Laor Bar-Yosef was significantly involved in the introduction and use of the Raman microspectroscopy part of this project. She was a major contributor to the novel conceptual use of this technology for detecting and monitoring sphingolipids in vitro and in cells. As expected from her deep involvement, Dr. Laor Bar-Yosef took part in analyzing the corresponding results.

Kumar, Sourav [Tel Aviv University (Israel)] (ORCI↗
DOE OSTI2023

Investigation of Theoretical Solutions to a Bottom-Raised Oscillating Surge Wave Energy Converter (OSWEC) Through Experimental and Parametric Studies

Experiments were conducted on a wave tank model of a bottom raised oscillating surge wave energy converter (OSWEC) model in regular waves. The OSWEC model shape was a thin rectangular flap, which was allowed to pitch in response to incident waves about a hinge located at the intersection of the flap and the top of the supporting foundation. Torsion springs were added to the hinge in order to position the pitch natural frequency at the center of the wave frequency range of the wave maker. The flap motion as well as the loads at the base of the foundation were measured. The OSWEC was modeled analytically using elliptic functions in order to obtain closed form expressions for added mass and radiation damping coefficients, along with the excitation force and torque. These formulations were derived and reported in a previous publication by the authors. While analytical predictions of the foundation loads agree very well with experiments, large discrepancies are seen in the pitch response close to resonance. These differences are analyzed by conducting a sensitivity study, in which system parameters, including damping and added mass values, are varied. The likely contributors to the differences between predictions and experiments are attributed to tank reflections, standing waves that can occur in long, narrow wave tanks, as well as the thin plate assumption employed in the analytical approach.

analytical↗
DOE OSTI2025

Rigorous incorporation of pH effects into ab initio electrochemical models

This report summarizes the work carried out with support of the United States Department of Energy under Award DE-SC0023410. The theme of this project was to update electronically grand canonical atomistic simulations to properly incorporate pH effects, on a rigorous thermodynamic basis, and to compare this to experimental findings. This project was primarily conducted by PI Andrew Peterson and his group at Brown University, with an unfunded collaboration with the Quantum Simulations Group at Lawrence Livermore National Laboratory with Dr. Joel Varley, who hosted the primary graduate student (Alexander Lackey) funded by this project and contributed to all major intellectual pursuits, utilizing the expertise and capabilities of the national laboratory to advance the project goals. Postdoctoral associate Dr. Juye Kim was also a major contributor to this project, and implementation of the final section included cooperation with several electronic-structure open-source software developers, including Colin Baker (Brown), Sandeep Sharma (CalTech), Georg Kastlunger (DTU), and Jens Jørgen Mortensen (DTU).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Toward a sustainable circular economy of multilayer plastic films: Life cycle and techno-economic assessment with a focus on end-of-life treatment and multiple recovery cycles

This study presents a life cycle assessment (LCA) and techno-economic analysis (TEA) of end-of-life technologies for treating polyethylene–polyamide barrier film waste, focusing on quality degradation across recovery cycles. Novel treatment methods are experimentally validated, while others are drawn from literature and industry consultations. A displacement approach, assuming no quality loss, is first applied. Results show that solvent-based recycling via the solvent-targeted recovery and precipitation (STRAP) process outperforms alternatives across environmental indicators, reducing global warming potential (GWP) by 40% compared to landfilling. Incineration performs worst in most categories, particularly eutrophication (80% higher than landfilling), due to nitrogen emissions. Experimentally validated downcycling (pelletizing) proves more economically viable. The assumption of infinite recoverability is overly optimistic. To address this, we propose a mathematical framework accounting for a finite number of recovery cycles. This refined model shows reduced GWP and cost savings for solvent recovery, making its benefits less pronounced than initially estimated. Sensitivity and uncertainty analyses reveal strong dependence on recovered material quality and solvent recovery efficiency, underscoring the need for optimized process design. Finally, hotspot analysis identifies greenhouse gas emissions from the polyamide supply chain as the dominant GWP contributor. In conclusion, the results underscore potential trade-offs across pathways and show that solvent-based recovery’s sustainability depends heavily on process conditions.

36 MATERIALS SCIENCE↗