Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Contact thermodynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

In-situ formation of stable interface towards Li-in anode for halide solid-state electrolyte

Halide-based solid-state electrolytes (SSEs) are promising candidates for next-generation all-solid-state lithium batteries (ASSLBs) due to their high ionic conductivity and chemical stability. However, their poor interfacial compatibility with lithium metal anode and Li-In alloy significantly hinder practical application due to the requirement for a protective interlayer. In this study, a novel approach to overcome this limitation is presented by introducing iron (Fe) doping into Li 3 InCl 6 (LIC), which enables direct and stable contact with lithium-indium (Li-In) metal without a protective interlayer. Thermodynamic and computational analyses identified Fe 3+ as a suitable dopant based on its similar reduction potential to In 3+ and structural compatibility within the halide lattice. The synthesized 10 at. % Fe-doped LIC exhibits high phase purity, retained ionic conductivity, and notably improved interfacial stability. Full-cell tests using Fe-LIC achieve over 300 cycles with 80 % capacity retention. At the same time, symmetric Li-In/ Fe-LIC/ Li-In cells sustain over 500 h of operation, representing the first reported long-term cycling of LIC-based ASSLB without a protective interlayer. In conclusion, this work establishes Fe doping as an effective strategy to stabilize halide SSEs of In system against Li-In alloy, thereby simplifying cell architecture and advancing the development of safer, high-performance halide-based solid-state electrolytes.

Halide-based solid-state electrolytes↗
DOE OSTI2021

Leveraging slow $\mathrm{DOTA}$ f-element complexation kinetics to enable separations by kinetic design

The design of metal-concerned solvent extraction systems frequently leverages thermodynamically derived differences in selectivity. An alternative approach, leveraging kinetic control, has been considered much less seriously. Our recent manuscript describing DOTA (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid) complexation kinetics across the lanthanide series shows the observed rate constant steadily increases across the series, with some non-monotonic behavior observed at terbium and thulium. This contrasts the thermodynamic stability constant trend, where lanthanide-DOTA stability constants initially increase and then plateau as a function of ionic radii after samarium. To leverage the kinetic differences of DOTA with the lanthanides across the series, kinetically based separations must be utilized. Since DOTA has very slow complexation kinetics, a separations system must expedite DOTA-metal complexation to allow a separation approximating practical application. Here in this report, a DOTA-based solvent extraction system, where DOTA is the aqueous holdback reagent and bis-2,4,4-trimethylpentylphosphinic acid (Cyanex 272) is the organic phase extractant, is demonstrated and compares the separations chemistry of Nd, Eu and Am. The slowness of DOTA complexation was addressed by heating the system. Results showed, in general, separation between metals is better during early phase contact, and diminishes under longer contact times. Under all conditions, separations are better than would be predicted based on a thermodynamic basis. This report suggests that while slowly complexing ligands classically used for biological applications may not be appropriate for thermodynamically designed metal separations, their use for kinetically based systems may be appropriate and enable a new design basis for f-element separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Hydration and transport properties of cesium hydroxide and mixed cesium hydroxide–sodium nitrite aqueous solutions

Here, this study explores the hydration and transport properties of aqueous cesium hydroxide (CsOH) solution, with or without 1 molar (M) sodium nitrite (NaNO 2 ). Historic studies of electrolyte solutions indicate that Cs + ions decrease viscosity and increase diffusion rates, whereas OH − ions have the opposite effect. Here, the influence of OH − was dominant in CsOH solutions, leading to increased viscosity and reduced diffusion rates. There was a linear relationship between diffusion coefficients and water activity, emphasizing the significant role of ion–water interactions in determining transport properties. This may be because the interaction between Cs + and the anions is weak even when they are in direct contact with each other. The weakness of the ion-pairing was established through thermodynamic analysis. The findings suggest that ion-pairing is not the only important interaction controlling transport properties when ion-pairing is weak. Nonetheless, ion-pairing or obstructions did result in more sluggish transport properties as electrolyte concentrations increased. Overall, the research enhances the understanding of the complexities underlying ion interactions in multicomponent solutions.

Reynolds, Jacob G. [Hanford Site (HNF), Richland, ↗
DOE OSTI2023

Thermal Stability of Schottky Contacts and Rearrangement of Defects in β ‐Ga 2 O 3 Crystals

Abstract The thermal stability of different Schottky contacts (Au, Pt, and Ni) on (100) β ‐Ga 2 O 3 single crystals grown by the Czochralski method is investigated. Besides the examination of the Schottky barrier parameters, contact‐dependent defect levels are investigated by deep‐level transient spectroscopy (DLTS) in a 100–650 K (ramp‐up) and 650–100 K (ramp‐down) temperature cycle. Several defect levels are detected below the conduction band minimum at 0.41, 0.60, 0.77, 0.96, and 1.17 eV. In the temperature ramp‐down DLTS, the 1.17 eV level disappears, and the 0.60 eV level appears for all Schottky contacts. DFT calculations suggest that rearrangement and dissociation of a single hydrogen from a doubly‐hydrogenated Ga─O divacancy complex occurs during the temperature sweep under bias. The trap level at 0.96 eV only appears after the thermal load for the Ni contact, in contrast to Au and Pt, where it is present without a thermal budget. Temperature‐dependent leakage current (at −4 V) measurements indicate oxidation of Ni, and further thermodynamic analysis suggests alloying of Au‐Ga atoms at the Au/ β ‐Ga 2 O 3 interface. These studies provide insight into the behavior induced by these common Schottky contacts and the alteration associated with temperature cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Weak scaling of the contact distance between two fluctuating interfaces with system size

A pair of flat parallel surfaces, each freely diffusing along the direction of their separation, will eventually come into contact. If the shapes of these surfaces also fluctuate, then contact will occur when their centers-of-mass remain separated by a nonzero distance ℓ. An example of such a situation is the motion of interfaces between two phases at conditions of thermodynamic coexistence, and in particular the annihilation of domain wall pairs under periodic boundary conditions. Here we present a general approach to calculate the probability distribution of the contact distance ℓ and determine how its most likely value ℓ* depends on the surfaces' lateral size L. Using the Edward-Wilkinson equation as a model for interfaces, we demonstrate that ℓ* scales weakly with system size, i.e., the dependence of ℓ* on L for both (1+1)- and (2+1)-dimensional interfaces is such that lim L→∞ (ℓ*/L) = 0. In particular, for (2+1)-dimensional interfaces ℓ* is an algebraic function of logL, a result that is confirmed by computer simulations of slab-shaped domains formed under periodic boundary conditions. Overall, this weak scaling implies that such domains remain topologically intact until ℓ becomes very small compared to the lateral size of the interface, contradicting expectations from equilibrium thermodynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1981

Thermodynamic limits for solar energy conversion by a quantum-thermal hybrid system

The limits are presented fo air mass 1.5 conditions. A maximum conversion efficiency of 74 percent is thermodynamically achievable for the quantum device operating at 3500 K and the heat engine in contact with a reservoir at 0 K. The efficiency drops to 56 percent for a cold reservoir at approximately room temperature conditions. Hybrid system efficiencies exceed 50 percent over receiver temperatures ranging from 1400 K to 4000 K, suggesting little benefit is gained in operating the system above 1400 K. The results are applied to a system consisting of a photovoltaic solar cell in series with a heat engine.

Byvik, C. E.↗
DOE OSTI2020

Temperature-Dependence of Corrosion of Ni-Based Superalloys in Hot CO 2 -Rich Gases Containing SO 2 Impurities

Future power plants will require Ni-based superalloys resistant to high-temperature corrosion in CO 2 -rich environments containing impurities. In this work, several commercially available Ni-based alloys (617, 230, 625, 263, 740H) were exposed at 600°C, 650°C, 750°C and 1 atm to 95% CO 2 , 4% H 2 O, 1% O 2 without/with 0.1% SO 2 to simulate compositions expected in a direct-fired supercritical CO 2 power cycle. The results indicate no effect of SO 2 at 750°C, a small negative effect at 650°C, and a large negative effect at 600°C. Alloys exposed at the higher temperatures (650–750°C) formed thin Cr-rich oxide scales, whereas the lowest temperature (600°C) resulted in thicker scales consisting of non-protective oxides and sulfates. Thermodynamic analysis indicates this increased corrosion is associated with a transition in the stable compounds in contact with the gas. Understanding the factors that affect this transition will aid in the selection or design of alloys for future CO 2 -based power systems.

36 MATERIALS SCIENCE↗
NASA NTRS2017

Dual-Mode Free-Jet Combustor

The dual-mode free-jet combustor concept, pictured in figure 1, is described. It was introduced in 2010 as a wide- operating-range propulsion device using a novel supersonic free-jet combustion process. The unique feature of the free-jet combustor pictured in figure 1a, is supersonic combustion in an unconfined free-jet that traverses a larger subsonic combustion chamber to a variable nozzle. During this mode of operation, the propulsive stream is not in contact with the combustor walls, and equilibrates to the combustion chamber pressure. To a first order, thermodynamic efficiency is similar to that of a traditional scramjet under the assumption of constant-pressure combustion. Qualitatively, a number of possible benefits to this approach are obvious.

supersonic combustion↗
NASA NTRS2017

Dual-Mode Free-Jet Combustor

The dual-mode free-jet combustor concept, pictured in figure 1, is described. It was introduced in 2010 as a wide- operating-range propulsion device using a novel supersonic free-jet combustion process. The unique feature of the free-jet combustor pictured in figure 1a, is supersonic combustion in an unconfined free-jet that traverses a larger subsonic combustion chamber to a variable nozzle. During this mode of operation, the propulsive stream is not in contact with the combustor walls, and equilibrates to the combustion chamber pressure. To a first order, thermodynamic efficiency is similar to that of a traditional scramjet under the assumption of constant-pressure combustion. Qualitatively, a number of possible benefits to this approach are obvious.

hypersonic propulsion↗
DOE OSTI2025

Effect of Propagating Dopant Reactivity on Lattice Oxygen Loss in LLZO Solid Electrolyte Contacted with Lithium Metal

Lithium lanthanum zirconium oxide (LLZO) is widely known as the most stable solid electrolyte against lithium metal electrodes. This thermodynamic stability can be lost by the presence of dopants which are required to stabilize the cubic phase of LLZO and can be reduced by lithium metal. However, the role of oxygen in such reactions is taken for granted. In this work, the reduction of Nb-substituted LLZO (Nb-LLZO) is explored by Li metal and shows that interfacial reactions propagate and lead to the decomposition with substantial Nb 5+ reduction deep into the bulk electrolyte. Scanning Transmission Electron Microscopy with Energy Dispersive X-ray Spectroscopy and thermogravimetric analyses show much of the reduction is due to oxygen vacancies formed, leading to increased electronic conductivity mapped with conductive Atomic Force Microscopy. Density functional theory calculations indicate oxygen release is favored by increased excess lithiation of Nb-LLZO. Electrochemical impedance of polycrystalline Nb-LLZO shows the continuous evolution of ionically resistive interphases near the lithium metal interface with Nb-LLZO while single crystals show little reactivity at room temperature and self-limiting reduction at 60°C. This work underlines the role of grain boundaries in propagating destructive solid electrolyte reactions and highlights previously unseen mechanisms involving lattice oxygen in LLZO.

Li metal, solid-state electrolytes↗
DOE OSTI2026

Stabilization of Miscible Aqueous Phases via Diffusion‐Controlled Multifunctional Nanoparticle‐Ligand Complexation

Liquid‐in‐liquid structuring by harnessing miscible aqueous domains can be achieved by inducing thermodynamically defined phase separation using aqueous solutions of incompatible solutes, where immiscibility is dictated by the concentrations of the solutes. For instance, in aqueous two‐phase systems (ATPSs), the interfacial tension between the two different aqueous solutions is so small that it stabilizes the phase‐separated domains, but not their shape, thus falling short of designing tunable, robust structures. Here, we introduce a diffusion‐controlled strategy that enables liquid‐in‐liquid compartmentalization absent a thermodynamically defined interface or bulk liquid‐liquid phase separation using a barrier formed in situ at the initial contact boundary of an aqueous dispersion of multifunctional nanoparticles and a solution of multifunctional ligands in pure water or a water/alcohol mixture. The nanoparticles and ligands are entropically driven to disperse uniformly but interact at the initial contact boundary more rapidly than bulk mixing, forming a layer that establishes a barrier akin to a semi‐permeable membrane and allows the formation of tubular compartments. A wealth of opportunities is enabled by the proposed technique, where examples in separations, soft electronic devices, and ultralight porous electromagnetic shielding materials are shown.

cryogels↗
DOE OSTI2020

Energetic Tug-of-War between Pt and Leaky TiO 2 : Positive and Negative Effects on the Function of Molecularly-Modified p -Si(111)|TiO 2 |Pt Photocathodes

Photoelectrochemical solar energy conversion to chemical products is a promising avenue towards renewable fuels, and TiO 2 deposition on semiconductor photocathodes is a widespread surface protection strategy. However, the electronic, thermodynamic, and kinetic effects of protection layers on interfacial energetics remains poorly understood. Here, electrochemical data (photocurrent onset and flatband potentials) of p-Si(111)|TiO 2 |Pt is collected in contact with an outer-sphere redox couple. We find that onset potentials shift negatively as a function of increasing oxide thickness, but this effect is not reflected in the flatband potentials. This reveals the mechanism of these shifts is kinetic rather than thermodynamic,and suggests that hole leakage through the TiO 2 is responsible. When Pt nanoparticles are deposited onto the TiO 2 , positive shifts in both the onset and flatband potentials are observed, revealing Pt catalysts are beneficial for more than just increased catalytic rates. These results highlight the importance of understanding the effects of surface modifications on the energetics at the interface in both catalytic and simple electron transfer systems.

14 SOLAR ENERGY↗
NASA NTRS1990

Kinetics and thermodynamics of ceramic/metal interface reactions related to high T(sub c) superconducting applications

Superconducting ceramic materials, no matter what their form, size or shape, must eventually make contact with non-superconducting materials in order to accomplish current transfer to other parts of a real operating system, or for testing and measurement of properties. Thus, whether the configuration is a clad wire, a bulk superconducting disc, tape, or a thick or thin superconducting film on a substrate, the physical and mechanical behavior of interface (interconnections, joints, etc.) between superconductors and normal conductor materials of all kinds is of extreme importance to the technological development of these systems. Fabrication heat treatments associated with the particular joining process allow possible reactions between the superconducting ceramic and the contact to occur, and consequently influence properties at the interface region. The nature of these reactions is therefore of great broad interest, as these may be a primary determinant for the real capability of these materials. Research related both to fabrication of composite sheathed wire products, and the joining contacts for physical property measurements, as well as, a review of other related literature in the field are described. Comparison are made between 1-2-3, Bi-, and Tl-based ceramic superconductors joined to a variety of metals including Cu, Ni, Fe, Cr, Ag, Ag-Pd, Au, In, and Ga. The morphology of reaction products and the nature of interface degradation as a function of time will be highlighted.

Notis, Michael R.↗
NASA NTRS1986

Feasibility analysis of reciprocating magnetic heat pumps

The conceptual design selected for detailed system analysis and optimization is the reciprocating gadolinium core in a regenerative fluid column within the bore of a superconducting magnet. The thermodynamic properties of gadolinium are given. A computerized literature search for relevant papers was conducted and is being analyzed. Contact was made with suppliers of superconducting magnets and accessories, magnetic materials, and various types of hardware. A description of the model for the thermal analysis of the core and regenerator fluids is included.

Larson, A. V.↗
DOE OSTI2020

Thermodynamics of spin-orbit-coupled bosons in two dimensions from the complex Langevin method

We investigate the thermal properties of interacting spin-orbit-coupled bosons with contact interactions in two spatial dimensions. To that end, we implement the complex Langevin method, motivated by the appearance of a sign problem, on a square lattice with periodic boundary conditions. We calculate the density equation of state nonperturbatively in a range of spin-orbit couplings and chemical potentials. In this work, our results show that mean-field solutions tend to underestimate the average density, especially for stronger values of the spin-orbit coupling. Additionally, the finite nature of the simulation volume induces the formation of pseudocondensates. These have been observed to be destroyed by the spin-orbit interactions.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Photosynthetic Biohybrid System for Enhanced Abiotic N 2 -to-NH 3 Conversion under Ambient Conditions

Photosynthetic biohybrid systems (PBSs) offer an eco-friendly approach to transforming solar energy into value-added products by integrating biological entities with inorganic semiconductors. However, the chemical conversion capacity of most PBSs has inherent limitations, as whole-cell bacteria and isolated enzymes require fine-tuning of environmental conditions. Here, in this study, we report a new PBS developed by introducing free-standing ceria nanoparticles into the purple membrane (PM) of Halobacterium salinarum archaea, which can unidirectionally transfer charge carriers in response to incident photons, even after separation from living archaea at various conditions. Our microscopy, spectroscopy, and synchrotron X-ray scattering analyses confirm that the electrostatic assembly between ceria and PM creates seamless interfacial contact, thereby enhancing the photocatalytic capacity of ceria. Although the conversion of dinitrogen (N 2 ) to ammonia (NH 3 ) is thermodynamically challenging due to the triple bond in N 2 and a series of charge-transfer reactions, our PM–ceria (PMC) hybrid nanoparticle efficiently produces NH 3 by reducing N 2 using solar energy even under atmospheric pressure and room temperature while simultaneously converting glycerol into value-added derivatives. Additionally, our PMC nanoparticle involves neither toxic/precious metals nor bioengineering processes to achieve enhanced photocatalytic N 2 -to-NH 3 conversion. This study sheds light on the new aspect of PBSs by employing PM to potentially resolve the global energy and environmental challenges posed by the conventional Haber–Bosch process.

Jang, Jinhyeong [Argonne National Laboratory (ANL)↗
DOE OSTI2022

Understanding What Limits the Voltage of Polycrystalline CdSeTe Solar Cells

The origin of voltage deficits in polycrystalline cadmium selenide telluride (CdSeTe) solar cells is unclear. Here, we present a comprehensive voltage loss analysis performed on state-of-the-art CdSeTe devices - fabricated at Colorado State University and First Solar - using photoluminescence techniques, including external radiative efficiency (ERE) measurements. More specifically, we report the thermodynamic voltage limit Voc,ideal, internal voltage iVoc and external voltage Voc of partially and fully finished cells fabricated with different dopant species, dopant concentrations and back contacts. Arsenic-doped aluminium-oxide-passivated cells made at Colorado State University present remarkably high ERE (>1%) - translating into iVoc above 970 mV - but suffer from poor back-contact selectivity. On the other hand, arsenic-doped devices from First Solar present almost perfect carrier selectivity (Voc=iVoc), leading to Voc above 840 mV, and are limited by recombination in various parts of the device. Thus, development of contact structures that are both passivating and selective in combination with highly luminescent absorbers is key to reducing voltage losses.

CdSeTe devices↗