Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Composition B”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

In Situ High-Temperature Structural Analysis of High-Entropy Rare-Earth Sesquioxides

High-entropy rare-earth (RE) sesquioxides (RE 2 O 3 ) containing five cations in equimolar amounts have been investigated for a variety of applications, but little is known about their polymorphic behavior and coefficient of thermal expansion. Here, in this work, we evaluate the effect of the average ionic radius (AIR) on the polymorphism of high-entropy RE 2 O 3 . Powder samples of compositions 1 (Lu,Y,Ho,Nd,La) 2 O 3 (AIR = 0.938 Å) and 2 (Gd,Eu,Sm,Nd,La) 2 O 3 (AIR = 0.982 Å) were synthesized via a wet chemical method, and bead samples were prepared for aerodynamic levitation by melting the powders in a copper hearth. Structural transitions were monitored upon cooling from the melt to 1000 °C via in situ X-ray diffraction on aerodynamically levitated samples. The phase evolution was liquid, hexagonal H-type, and monoclinic B-type for composition 1 and liquid, cubic X-type, H-type, and B-type for composition 2. Based on their AIR, the general polymorphic transformations of the high-entropy RE 2 O 3 follow the trend of single-RE RE 2 O 3 , but the transition temperatures differ from those of single-RE RE 2 O 3 . The coefficient of thermal expansion values of the B-type phase of compositions 1 and 2 are similar to those of Gd 2 O 3 and previously published high-entropy RE 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tribological Evaluation of Candidate Coatings

This SPP project with Novus was to investigate tribological properties of candidate ceramic composites. Systematic tribological bench tests and surface characterization were performed to determine composition-property relationships of several Zr-Ti-B based ceramic composites of different compositions. The lowest friction coefficient was measured with Ti0.6Zr0.4B2 composition tested in the hydraulic oil. Surface characterization suggests a formation of ZDDP tribofilm in the worn region when tested with a hydraulic oil. In all experiments, the ceramic composites did not have measurable wear, but caused material loss of the steel countersurface.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evolutionary Variation in MADS Box Dimerization Affects Floral Development and Protein Abundance in Maize

Interactions between MADS-box transcription factors are critical in the regulation of floral development, and shifting MADS-box protein-protein interactions are predicted to have influenced floral evolution. However, precisely how evolutionary variation in protein-protein interactions affects MADS-box protein function remains unknown. To assess the impact of changing MADS-box protein-protein interactions on transcription factor function, we turned to the grasses, where interactions between B-class MADS-box proteins vary. We tested the functional consequences of this evolutionary variability using maize as an experimental system. We found that differential B-class dimerization was associated with subtle, quantitative differences in stamen shape. In contrast, differential dimerization resulted in large-scale changes to downstream gene expression. Differential dimerization also affected B-class complex composition and abundance, independent of transcript levels. This indicates that differential B-class dimerization affects protein degradation, revealing an important consequence for evolutionary variability in MADS-box interactions. Our results highlight complexity in the evolution of developmental gene networks - changing protein-protein interactions could affect not only the composition of transcription factor complexes, but also their degradation and persistence in developing flowers. Here, our results also show how coding change in a pleiotropic master regulator could have small, quantitative effects on development.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

High-pressure high-temperature synthesis and characterization of B 10 C

The boron-rich boron carbide materials have been traditionally synthesized by adding boron powder to B 4 C material and subjecting it to hot pressing sintering for materials composition containing 8.8–20 at. % carbon in boron (composition range of B 10.4 C to B 4 C). Our study explores a synthesis route for B 10 C starting from high-purity boron and carbon and direct conversion under high pressure and high temperature (HPHT) conditions of 2000 °C and 6–8 GPa. Synthesis was verified via x-ray diffraction analysis, showing the conversion of the high-purity boron and carbon powder mixture into a hexagonal B 10 C structure (R-3m space group) with lattice parameters of a = b = 5.6115 Å and c = 12.197 Å. The concentration of boron was measured through x-ray photoelectron spectroscopy, confirming the B 10 C ratio. The measured nanoindentation mean hardness of B 10 C was 40 GPa. Raman spectroscopy of the HPHT synthesized sample shows characteristic vibrational breathing modes of boron icosahedron and an additional intense band at a vibrational frequency of 380 cm –1 . This Raman band, which appears notably weaker in earlier studies and B 4 C samples, is assigned to the linear chain of B–B–B and attributed to the maximal incorporation of boron within the hexagonal structure.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Passivation Mechanisms in Locally Etched P-Type Poly-Si on Silicon Nitride/Silicon Oxide Stack

Tunneling oxide passivated contacts are quickly becoming the industry standard for high-efficiency c-Si based photovoltaic cells. Further development of these structures is essential to enable higher efficiencies and better reliability of cells. By utilizing poly-Si/SixNy/SiOx stacks, very high efficiencies have been demonstrated on small area cells. In this work we investigate the cause of the excellent passivation seen by these structures and show that the primary reason of the excellent passivation seen is the blocking B diffusion to the SiOx/c -Si interface. We also show that the interface between the silicon nitride and polysilicon affects B diffusion through to the c-Si interface. Finally, we demonstrate that the composition of the nitride used is of great importance, and that an incorrect nitride composition leads to B diffusion, and is directly correlated to poor passivation performance.

industries↗
DOE OSTI2020

Mathematical model of broadly reactive plasma cell production

Strain-specific plasma cells are capable of producing neutralizing antibodies that are essential for clearance of challenging pathogens. These neutralizing antibodies also function as a main defense against disease establishment in a host. However, when a rapidly mutating pathogen infects a host, successful control of the invasion requires shifting the production of plasma cells from strain-specific to broadly reactive. In this study, we develop a mathematical model of germinal center dynamics and use it to predict the events that lead to improved breadth of the plasma cell response. We examine scenarios that lead to germinal centers that are composed of B-cells that come from a single strain-specific clone, a single broadly reactive clone or both clones. We find that the initial B-cell clonal composition, T-follicular helper cell signaling, increased rounds of productive somatic hypermutation, and B-cell selection strength are among the mechanisms differentiating between strain-specific and broadly reactive plasma cell production during infections. Understanding the contribution of these factors to emergence of breadth may assist in boosting broadly reactive plasma cells production.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Review of Potential Wigner Effect Impacts on the Irradiated Graphite in Decommissioned Hanford Reactors

This review of is motivated by the need to consider future disposal of the nine surplus Hanford Site production reactors (B, C, D, DR, F, H, KE, KW, and N) that are decommissioned as part of the Hanford Site Composite Analysis. The B Reactor has been designated as a museum. The other eight reactors will be evaluated in a future performance assessment before a final disposal facility can be authorized to construction or to receive this waste form. After a performance assessment is available, then the Hanford Site Composite Analysis would be updated to account for this additional source term. Disposal is currently assumed to occur in calendar year 2070 by one-piece removal to a projected disposal facility in the 200 West Area of the Hanford Site Central Plateau. The N Reactor core may also be disposed analogously to the single-pass reactors. It will further assume that the B Reactor will remain a museum permanently. The U.S. Department of Energy studied at least five decommissioning alternatives for long-term, safe management of radionuclide-contaminated materials inside the eight single-pass reactors (DOE/EIS-0119-FEIS, Decommissioning of Eight Surplus Production Reactors at the Hanford Site, Richland, Washington).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Chronology of alkali anorthosite 14304 clast “b” records basin forming impact at ~3.95 Ga

Alkali-suite rocks constitute one of three major suites of lunar crustal rocks. As such, constraining their formation timescales and petrogenesis is important for understanding the earliest magmatic history of the Moon. However, the magmatic history of alkali-suite rocks is partly obscured by superimposed effects of major basin-forming impact events on the lunar nearside. Consequently, unambiguous crystallization ages of samples from this suite of rocks have not been determined. Here, the aim of this study is to better understand the petrogenetic history of the alkali-suite and the potential superimposed effects of impact metamorphism by determining Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar ages for an alkali anorthosite clast from Apollo 14 lithic breccia 14304 termed clast “b”. The new chronologic measurements of clast “b” yield concordant Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar ages of 3947 ± 13 Ma, 3975 ± 34 Ma, and 3937 ± 37 Ma respectively, resulting in a weighted mean age of 3949 ± 11 Ma. This age is not interpreted to date an igneous event related to production of the lunar highlands crust and instead the chronology and petrography of clast “b” are most readily explained by an impact event at ~3.95 Ga that caused near-complete isotopic re-equilibration of the Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar chronometers. The weighted mean age of 3949 ± 11 Ma of clast “b” is several hundred Ma younger than 4.3–4.4 Ga ages typically determined for samples of other crustal rock suites but in very good agreement with independent estimates for the formation of Imbrium basin ejecta and other marginally older impact events which are thought to have been sampled at the Apollo 14 landing site. Thus, although petrologic and geochemical examination suggest that clast “b” is a pristine igneous clast, its age likely records an impact event at the Apollo 14 landing site. Whereas the various determined ages of clast “b” do not reflect the timescales of alkali-suite magmatism, the relatively low initial Sr and Nd isotopic compositions of clast “b” indicate that its protolith evolved with very low 147 Sm/ 144 Nd and 87 Rb/ 86 Sr that are distinct from estimates for urKREEP but similar to that of lunar plagioclase. This implies that the igneous protolith of clast “b” derived from a plagioclase-dominated KREEP-rich source that must have formed after the formation of the urKREEP source at ~4.35 Ga but well before the impact event recorded by clast “b” at ~3.95 Ga.

58 GEOSCIENCES↗
DOE OSTI2021

Rate-dependent strength and deformation heterogeneity of B4C-reinforced Al composite: Time-resolved imaging with synchrotron X-rays

Dynamic (up to 5500 s -1 ) and quasi-static compression tests are conducted on a 15 wt% B4C particle-reinforced Al (B 4 C/Al) composite. In situ, high-speed synchrotron X-ray phase contrast imaging and digital image correlation are employed to map mesoscale deformation fields at μm and μs scales. The bulk stress–strain curves show significant strain and strain-rate hardening under dynamic compression. The strain-rate sensitivity exponent is an order of magnitude higher at high strain rates (> 10 3 s -1 ) than that at low strain rates (< 10 -2 s -1 ). Strain field mapping demonstrates distinct compressive strain localizations for both quasi-static and dynamic loading. Nevertheless, compressive strain localizations appear denser in spacing under dynamic loading, owing to spontaneous dislocation nucleation in both weak and strong zones. This results in a higher density of geometrically necessary dislocations, which contributes to the higher strain and strain-rate hardening of B 4 C/Al under dynamic loading. Additionally, the ratio of the maximum local strain to the bulk average is 1.5, and the local strain-rate enhancement cannot explain the increased rate sensitivity of B 4 C/Al under dynamic loading. Therefore, the rate-dependent deformation heterogeneity dominates the strain-rate hardening of B 4 C/Al. Postmortem analyses help correlate deformation features to particle- and grain-scale microstructures, yielding consistent results with mesoscale strain fields.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Photoreactive Capture and Conversion of Dilute Carbon Dioxide into Synthetic Natural Gas

This study introduces a photoreactive system that integrates the capture of dilute CO 2 streams with their catalytic conversion to synthetic natural gas (CH 4 ), utilizing a Ru nanoparticle (NP)-doped TiO 2 composite loaded with linear polyethylenimine (L-PEI) and enhanced with plasmonic titanium nitride (TiN). This light-driven approach mitigates challenges that have plagued traditional thermal reactive carbon capture (RCC) methods, such as CO 2 slip and amine degradation. We demonstrate that L-PEI enables stable CO 2 capture and conversion, achieving ~70% conversion of captured CO 2 to CH 4 across multiple reaction cycles using nonflammable forming gas (~5% H 2 ) as the reductant. In contrast, branched PEI (B-PEI)-loaded composites exhibited significant catalyst deactivation after several RCC cycles. Scanning transmission electron microscopy (STEM) imaging confirms that significant sintering of the Ru NPs occur in the B-PEI sample under RCC conditions, whereas their size remains stable in more rigid L-PEI composites. Technoeconomic analysis (TEA) estimates that CH 4 production using this system could cost less than $\$$5/kg based on current electrocatalytic H 2 prices. These results represent one of the most promising demonstrations of amine-based RCC employing dilute CO 2 sources to date.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Product Consistency Test Results for the Environmental Management Headquarters (EMHQ) Low-Activity Waste (LAW) Glasses

This report provides the results of the Product Consistency Test leachates from the Environmental Management Headquarters Low-Activity Waste glasses, a series of simulated nuclear waste glasses designed and fabricated at the Pacific Northwest National Laboratory. The series included quenched versions of the glasses. These data will be used in the development, validation, and implementation of enhanced property/composition models for waste glass vitrification at Hanford. The measured concentrations of the analytes in the test blank samples were below detection limits. The measured concentrations of B, Li, Na, and Si in the Approved Reference Material-1 samples included with the Product Consistency Tests fell within control chart values indicating proper test performance. The measured glass compositions for the study glasses were close to target values: therefore, little difference was seen when evaluating the normalized values using the targeted or measured glass compositions. The $NC_B$, $NC_{Na}$, and $NC_{Si}$ values were less than the Hanford Tank Waste Treatment and Immobilization Plant low-activity waste constraint of 4 g/L for all glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Polystyrene-block-Polydimethylsiloxane as a Potential Silica Substitute for Polysiloxane Reinforcement

We report here on microphase-separated poly(styrene-block-dimethylsiloxane) (PS-b-PDMS) as a reinforcing filler in PDMS thermosets that overcomes the long-standing problem of aging in the processing of silica-reinforced silicone. Surprisingly, PS-b-PDMS reinforced composites display comparable mechanical performance to silica-modified analogs, even though the modulus of PS is much smaller than that of silica and there is no evidence of percolation with respect to the rigid PS domains. We have found that a few unique characteristics contribute to the reinforcing performance of PS-b-PDMS. The strong self-assembly behavior promotes batch-to-batch repeatability by having well-dispersed fillers. The structure and size of the fillers depend on the loading and characteristics of both filler and matrix, along with the shear effect. The reinforcing effect of PS-b-PDMS is mostly brought by the entanglements between the corona layer of the filler and the matrix, rather than the hydrodynamic reinforcement of the PS phase.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Atmospheric CO 2 estimates for the Miocene to Pleistocene based on foraminiferal $δ^{11}$B at Ocean Drilling Program Sites 806 and 807 in the Western Equatorial Pacific

Constraints on the evolution of atmospheric CO 2 levels throughout Earth's history are foundational to our understanding of past variations in climate. Despite considerable effort, records vary in their temporal and spatial coverage and estimates of past CO 2 levels do not always converge, and therefore new records and proxies are valuable. Here we reconstruct atmospheric CO 2 values across major climate transitions over the past 16 million years using the boron isotopic composition (δ 11 B) of planktic foraminifera from 89 samples obtained from two sites in the West Pacific Warm Pool, Ocean Drilling Program (ODP) Sites 806 and 807, measured using high-precision multi-collector inductively coupled plasma mass spectrometry. We compare our results to published data from ODP Site 872, also in the Western Equatorial Pacific, that goes back to 22 million years ago. These sites are in a region that today is near equilibrium with the atmosphere and are thought to have been in equilibrium with the atmosphere for the interval studied. We show that δ 11 B data from this region are consistent with other boron-based studies. The data show evidence for elevated pCO 2 during the Middle Miocene and Early to Middle Pliocene, and reductions in pCO 2 of ~200 ppm during the Middle Miocene Climate Transition, ~250 ppm during Pliocene Glacial Intensification and ~50 ppm during the Mid-Pleistocene Climate Transition. During the Mid-Pleistocene Transition there is a minimum pCO 2 at marine isotopic stage (MIS) 30. Our results are consistent with a coupling between pCO 2 , temperature and ice sheet expansion from the Miocene to the late Quaternary.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Autonomous phase mapping of gold nanoparticles synthesis with differentiable models of spectral shape

Autonomous experimentation–or self-driving labs–offers a systematic approach to accelerate materials discovery by integrating automated synthesis, characterization, and data-driven decision-making. We present a closed-loop workflow for the on-demand synthesis and structural characterization of colloidal gold nanoparticles, enabling direct mapping from composition to nanoscale structure. Our framework leverages differentiable models of spectral shape to address two central tasks in self-driving labs: (a) phase mapping, or identifying compositional regions with distinct structural behavior; and (b) material retrosynthesis, or optimizing compositions for target structure. Using functional data analysis, we develop a data-driven model with generative pre-training, active learning, and high-throughput experiments to predict spectral responses across composition space. We demonstrate the approach on seed-mediated growth of gold nanoparticles, showcasing its ability to extract design rules, reveal secondary interactions, and efficiently navigate morphology space. Gradient-based optimization of the models enables inverse design, making this a unified platform.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Active learning of ternary alloy structures and energies

Abstract Machine learning models with uncertainty quantification have recently emerged as attractive tools to accelerate the navigation of catalyst design spaces in a data-efficient manner. Here, we combine active learning with a dropout graph convolutional network (dGCN) as a surrogate model to explore the complex materials space of high-entropy alloys (HEAs). We train the dGCN on the formation energies of disordered binary alloy structures in the Pd-Pt-Sn ternary alloy system and improve predictions on ternary structures by performing reduced optimization of the formation free energy, the target property that determines HEA stability, over ensembles of ternary structures constructed based on two coordinate systems: (a) a physics-informed ternary composition space, and (b) data-driven coordinates discovered by the Diffusion Maps manifold learning scheme. Both reduced optimization techniques improve predictions of the formation free energy in the ternary alloy space with a significantly reduced number of DFT calculations compared to a high-fidelity model. The physics-based scheme converges to the target property in a manner akin to a depth-first strategy, whereas the data-driven scheme appears more akin to a breadth-first approach. Both sampling schemes, coupled with our acquisition function, successfully exploit a database of DFT-calculated binary alloy structures and energies, augmented with a relatively small number of ternary alloy calculations, to identify stable ternary HEA compositions and structures. This generalized framework can be extended to incorporate more complex bulk and surface structural motifs, and the results demonstrate that significant dimensionality reduction is possible in thermodynamic sampling problems when suitable active learning schemes are employed.

Chemistry↗
DOE OSTI2020

A Lanthanum‐Filled Carbon–Boron Clathrate

Abstract We report a carbon‐boron clathrate with composition 2 La@B 6 C 6 (LaB 3 C 3 ). Like recently reported SrB 3 C 3 , [1] single‐crystal X‐ray diffraction and computational modelling indicate that the isostructural La member crystallizes in the cubic bipartite sodalite structure (Type‐VII clathrate) with La atoms encapsulated within truncated octahedral cages composed of alternating carbon and boron atoms. The covalent nature of the B−C bonding results in a hard, incompressible framework, and owing to the balanced electron count, La 3+ [B 3 C 3 ] 3− exhibits markedly improved pressure stability and is a semiconductor with an indirect band gap predicted near 1.3 eV. A variety of different guest atoms may potentially be substituted within Type‐VII clathrate cages, presenting opportunities for a large family of boron‐stabilized, carbon‐based clathrates with ranging physical properties.

Strobel, Timothy A.↗