Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Composite particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Saturn's rings - Particle composition and size distribution as constrained by observations at microwave wavelengths. II - Radio interferometric observations

Theoretical models are presented of the brightness of Saturn's rings at microwave wavelengths (0.34-21.0 cm) including both intrinsic ring emission and diffuse scattering by the rings of the planetary emission. In addition, several previously existing sets of interferometric observations of the Saturn system at 0.83, 3.71, 6.0, 11.1, and 21.0 cm wavelengths are analyzed. A comparison of models and experimental data make it possible to establish improved constraints on the properties of the rings. In particular, it is found that (1) the maximum optical depths in the rings is 1.5 + or - 0.3 referred to visible wavelengths; (2) a significant decrease in ring optical depths from 3.7 to 21.0 cm makes it possible to rule out the possibility that more than 30% of the cross section of the rings is composed of particles larger than about a meter; and (3) the ring particles cannot be primarily of silicate composition (independently of particle size), and the particles cannot be primarily smaller than about 0.1 cm, independently of composition.

Cuzzi, J. N.↗

Neutron detector using lithiated glass-scintillating particle composite

A neutron detector composed of a matrix of scintillating particles imbedded in a lithiated glass is disclosed. The neutron detector detects the neutrons by absorbing the neutron in the lithium-6 isotope which has been enriched from the natural isotopic ratio to a commercial ninety five percent. The utility of the detector is optimized by suitably selecting scintillating particle sizes in the range of the alpha and the triton. Nominal particle sizes are in the range of five to twenty five microns depending upon the specific scintillating particle selected.

47 OTHER INSTRUMENTATION↗

Effect of carbonyl iron particles composition on the physical characteristics of MR grease

Magnetorheological (MR) grease is an extension of the study of magnetorheological materials. The MR grease can help to reduce the particles sedimentation problem occurred in the MR fluids. Within this study, an effort has been taken to investigate the effect of different weight compositions of carbonyl iron particles on the physical and chemical characteristics of the MR grease under off-state condition (no magnetic field). The MR grease is prepared by mixing carbonyl iron particles having a size range of 1 to 10 µm with commercial NPC Highrex HD-3 grease. Characterizations of MR grease are investigated using Vibrating Sample Magnetometer (VSM), Environmental Scanning Electron Microscopy (ESEM), Differential Scanning Calorimeter (DSC) and rheometer. The dependency of carbonyl iron particles weight towards the magnetic properties of MR grease and other characterizations are investigated.

36 MATERIALS SCIENCE↗

Solar particle composition, spectra, and frequency of occurrence

The astrophysical mechanisms involved in solar particle events (SPEs) and the effects of SPEs on the equipment and crews of space missions in earth orbit are reviewed. The major features of class I (radio type III and V) and class II (radio type II and IV) SPEs are summarized; the relative abundances of electrons, protons, and heavier particles in the two SPE classes are discussed; and published observational data showing the contributions of different SPE particle populations to the background radiation are presented in graphs.

Reames, D. V.↗

Energetic particle composition variations during the March 1991 events measured with the Ulysses EPAC instrument

Energetic particle measurements are reported which were obtained with the EPAC instrument on board the Ulysses spacecraft during March 1991 when a series of important flares occurred at the sun. The time interval March 22 through March 29 is studied in three periods with different ion compositions. At a quasi-perpendicular shock on March 23, shock-drift acceleration of protons, helium and electrons was observed. Thirteen hours after this shock the energetic ion composition changed dramatically by almost two orders of magnitude, signaling the arrival of a coronal mass ejection or driver gas. This driver gas was still present at the spacecraft when a second quasi-perpendicular shock passed the spacecraft. The ratio Fe/O increased from 0.6 to 1.0 indicative of a connection to solar particles for about six hours after the second shock. The second shock did not accelerate ions as well and electrons not at all. Six hours after this shock the same oxygen and ion composition was observed as before, indicating that the second shock did not alter the energetic ion composition. A third ion composition was observed before the driver gas disappeared which was significantly different from those observed before the first and between the two shocks.

Krupp, N.↗

Saturn's rings: Particle composition and size distribution as constrained by microwave observations. I - Radar observations

The radar backscattering characteristics of compositional and structural models of Saturn's rings are calculated and compared with observations of the absolute value, wavelength dependence, and degree of depolarization of the rings' radar cross section (reflectivity). The doubling method is used to calculate reflectivities for systems that are many particles thick using optical depths derived from observations at visible wavelengths. If the rings are many particles thick, irregular centimeter- to meter-sized particles composed primarily of water ice attain sufficiently high albedos and scattering efficiencies to explain the radar observations. In that case, the wavelength independence of radar reflectivity implies the existence of a broad particle size distribution; a narrower size distribution is also a possibility. Particles of primarily silicate composition are ruled out by the radar observations. Purely metallic particles may not be ruled out on the basis of existing radar observations. A monolayer of very large ice 'particles' that exhibit multiple internal scattering may not yet be ruled out.

Cuzzi, J. N.↗

Calcium-silicate-based porous particles, composition, method of making and use thereof

A method for synthesizing calcium-silicate-based porous particles (CSPPs) is described. Control over CSPP morphology and pore size is achieved through a refined solution-based synthesis, allowing loading of a variety of sealants. These particles, upon external stimuli, release the loaded sealant into the surrounding material. Methods of loading the CSPPs with loading sealant are described. The CSPPs may be used in pure form or mixed with another material to deliver self-healing, sealing and multi-functional properties to a physical structure. The composition of the CSPPs is described, along with methods of use of the CSPPs.

Shahsavari, Rouzbeh↗

Incident-Energy Dependent Quenching of the Analyzing Power in Pre-Equilibrium Composite Particle Emission

The proton-induced pre-equilibrium process in the energy range of 100 to 160 MeV, which leads to emission of composite ejectiles such as {sup 3}He and {alpha}-particles, is discussed. New cross section and analyzing power measurements for the (p,{sup 3}He) reaction on {sup 93}Nb at an incident energy of 160 MeV are presented, and these are found to be in agreement with the prediction of a statistical multistep theoretical formulation. The observed quenching of the analyzing power is also reproduced well by the theory. The results are consistent with earlier work at lower incident energies and other nuclear species.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Indirect morphological analysis of particles in polymer particle composites via non-destructive permittivity measurements

We report polymers with specific properties (e.g. electrical, optical or mechanical) are commonly obtained via the addition of additives. The composites final properties rely on the preservation of these additives during embedding, which is, in particular, challenging for high aspect ratio particles, like shear-sensitive flaky particles (ssFP). Thus, in cases of ssFP off- or in-line monitoring is required. This study addresses the lack of suitable non-destructive monitoring methods appropriate for ssFP possessing a thickness below 1um and an area equivalent diameter of several 10 um. An elegant method was developed to validate the integrity of ssFP within composites, which is based on the measurement of the composite's permittivity and applying precise micro-structure property correlations to indirectly determine their morphological features. The main hypothesis tested was that a reduction of the particle’s aspect ratio by a factor of larger than 5 can be detected by the measurement of the composite's permittivity. In this study,the matrix polymer polyethylene or an epoxy resin together with mica-based ssFP with a mean area equivalent diameter of 42 um were used. The micro-structure property correlation presented by G. Ondracek [Z. f. Werkstofftechnik, 8:280-287, 1977] provided the necessary theoretical backbone to indirectly infer geometrical changes to the ssFP from permittivity measurements. An excellent match was obtained between the indirectly and the directly determined particle aspect ratios. This preliminary study established the presented technique as a promising non-destructive test method to monitor the integrity of ssFPs embedded in a polymer. In principle this technique is adaptable for in-line process monitoring.

36 MATERIALS SCIENCE↗

Quantum partition functions of composite particles in a hydrogen-helium plasma via path integral Monte Carlo

We compute two- and three-body cluster functions that describe contributions of composite entities, like hydrogen atoms, ions H{sup −}, H{sub 2}{sup +}, and helium atoms, and also charge-charge and atom-charge interactions, to the equation of state of a hydrogen-helium mixture at low density. A cluster function has the structure of a truncated virial coefficient and behaves, at low temperatures, like a usual partition function for the composite entity. Our path integral Monte Carlo calculations use importance sampling to sample efficiently the cluster partition functions even at low temperatures where bound state contributions dominate. We also employ a new and efficient adaptive discretization scheme that allows one not only to eliminate Coulomb divergencies in discretized path integrals, but also to direct the computational effort where particles are close and thus strongly interacting. The numerical results for the two-body function agree with the analytically known quantum second virial coefficient. The three-body cluster functions are compared at low temperatures with familiar partition functions for composite entities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetospheric particle composition experiment

Thin foils of aluminum and platinum were mounted on the exterior of the Skylab spacecraft where they were bombarded by particles that penetrate to the 400-km spacecraft altitude, including auroral particles precipitating from the earth magnetosphere. These foils have a high trapping efficiency for both charged and neutral particles above 1 keV and a decreasing but appreciable efficiency below that energy. Some sections of the foils were double layered to obtain an estimate of the energy of the entrapped particles. The foils were retrieved and returned for analysis in an ultrahigh-vacuum mass spectrometer. So far, the noble gas components of the entrapped particles have been analyzed in selected sections of two foils. Helium-4, helium-3, neon-20, and neon-22 have been detected.

Geiss, J.↗

AMPTE/CCE energetic particle composition measurements during the September 4, 1984 magnetic storm

The results of measurements for the magnetic-storm period of September 4-7, 1984 from the medium-energy particle analyzer (MEPA) on the CCE spacecraft are presented. It is shown that within L-shells of about 2.5 to 5 in the dusk sector near the equatorial plane, the enhancement factor in the fluxes for the CNO group is greater than that of helium, which is greater than that of protons. The flux ratios of helium and CNO over all ions at the same total energy show considerable increases in the same L-shell ranges. For the particle population measured by MEPA, a local current-density enhancement of about 0.5 nA/sq m is found over the L range of 3.5 to 6 during the magnetic storm. It is found that the total current density is dominated by the pressure-gradient current of the protons.

Mcentire, R. W.↗

Solubility of methanol in low-temperature aqueous sulfuric acid and implications for atmospheric particle composition

Using traditional Knudsen cell techniques, we find well-behaved Henry's law uptake of methanol in aqueous 45 - 70 wt% H2SO4 solutions at temperatures between 197 and 231 K. Solubility of methanol increases with decreasing temperature and increasing acidity, with an effective Henry's law coefficient ranging from 10(exp 5) - 10(exp 8) M/atm. Equilibrium uptake of methanol into sulfuric acid aerosol particles in the upper troposphere and lower stratosphere will not appreciably alter gas-phase concentrations of methanol. The observed room temperature reaction between methanol and sulfuric acid is too slow to provide a sink for gaseous methanol at the temperatures of the upper troposphere and lower stratosphere. It is also too slow to produce sufficient quantities of soluble reaction products to explain the large amount of unidentified organic material seen in particles of the upper troposphere.

Iraci, Laura T.↗

Effective Thermoelasticity of Polymer-Bonded Particle Composites with Imperfect Interfaces and Thermally Expansive Interphases

A micromechanical model for the thermoelasticity of polymer-bonded composites is presented. The model is particularly aimed at describing materials where the polymeric binder phase undergoes non-negligible thermal expansion affecting the overall thermoelastic response. Constitutive choices for modeling a mixed binder-void interphase layer are proposed, and an associated decomposition of total eigenstrains into classical, elastic imperfection (damage), and binder thermal expansivity parts is examined within the context of imperfect inter-particle interfaces. A novel temperature dependent modified Eshelby tensor is identified, making possible the development of a temperature dependent modified self-consistent homogenization scheme—what we call the M θ-SCH model. A method for distinguishing between dispersed and isolated parts of the binder and void phases in the model is also provided, along with a description of particle coating (or interphase) thickness derived from particle morphology and mesoscale effective properties. Finally, although the theory is general, its development is motivated by the need to model anisotropic and highly nonlinear observed thermal expansion behavior of the polymer bonded explosive PBX 9502, for which model simulations are performed and compared with existing measurements.

36 MATERIALS SCIENCE↗

Colloid Science of Metal Nanoparticle Catalysts in 2D and 3D Structures. Challenges of Nucleation, Growth, Composition, Particle Shape, Size Control and their Influence on Activity and Selectivity

Recent breakthroughs in synthesis in nanosciences have achieved control of size and shapes of nanoparticles that are relevant for catalyst design. In this article, we review the advance of synthesis of nanoparticles, fabrication of two and three dimensional model catalyst system, characterization, and studies of activity and selectivity. The ability to synthesize monodispersed platinum and rhodium nanoparticles in the 1-10 nm range permitted us to study the influence of composition, structure, and dynamic properties of monodispersed metal nanoparticle on chemical reactivity and selectivity. We review the importance of size and shape of nanoparticles to determine the reaction selectivity in multi-path reactions. The influence of metal-support interaction has been studied by probing the hot electron flows through the metal-oxide interface in catalytic nanodiodes. Novel designs of nanoparticle catalytic systems are discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗