Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Compatibility error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Probing the Geometry and Physics of the Emission Region in Active Galactic Nuclei using hard X-ray & Gamma-ray Observations

The X-ray spectra of {approx}200 AGN collected from Swift-BAT were analyzed to test the Unified Model for AGN. Specifically, the photon indices, high energy cutoffs, and reflection components of Sy1 and Sy2 were compared. Under the Unified Model, the photon indices and reflection components for Sy1 should be larger than Sy2 and the high energy cutoffs should be the same. Fitting a simple power law model to the sample spectra proved to be insufficient. The PEXRAV model fit the spectra of the Sy1 and Sy2 significantly better, indicating that a reflection component and/or high energy cutoff exists as the Unified Model expects. Using both the simple power law and PEXRAV models it was concluded that in the population studied, Sy1 had a larger photon index than Sy2, as expected by the Unified Model. For Sy1 and Sy2, the reflection components were found to be compatible, but given the large errors, this finding cannot be said to be evidence against the Unified Model. However, it was concluded that Sy1 and Sy2 have different high energy cutoffs, which is unexpected under the Unified Model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Breast Patient Setup Error Assessment: Comparison of Electronic Portal Image Devices and Cone-Beam Computed Tomography Matching Results

Purpose: To quantify the differences in setup errors measured with the cone-beam computed tomography (CBCT) and electronic portal image devices (EPID) in breast cancer patients. Methods and Materials: Repeat CBCT scan were acquired for routine offline setup verification in 20 breast cancer patients. During the CBCT imaging fractions, EPID images of the treatment beams were recorded. Registrations of the bony anatomy for CBCT to planning CT and EPID to digitally reconstructed-radiographs (DRRs) were compared. In addition, similar measurements of an anthropomorphic thorax phantom were acquired. Bland-Altman and linear regression analysis were performed for clinical and phantom registrations. Systematic and random setup errors were quantified for CBCT and EPID-driven correction protocols in the EPID coordinate system (U, V), with V parallel to the cranial-caudal axis and U perpendicular to V and the central beam axis. Results: Bland-Altman analysis of clinical EPID and CBCT registrations yielded 4 to 6-mm limits of agreement, indicating that both methods were not compatible. The EPID-based setup errors were smaller than the CBCT-based setup errors. Phantom measurements showed that CBCT accurately measures setup error whereas EPID underestimates setup errors in the cranial-caudal direction. In the clinical measurements, the residual bony anatomy setup errors after offline CBCT-based corrections were {Sigma}{sub U} = 1.4 mm, {Sigma}{sub V} = 1.7 mm, and {sigma}{sub U} = 2.6 mm, {sigma}{sub V} = 3.1 mm. Residual setup errors of EPID driven corrections corrected for underestimation were estimated at {Sigma}{sub U} = 2.2mm, {Sigma}{sub V} = 3.3 mm, and {sigma}{sub U} = 2.9 mm, {sigma}{sub V} = 2.9 mm. Conclusion: EPID registration underestimated the actual bony anatomy setup error in breast cancer patients by 20% to 50%. Using CBCT decreased setup uncertainties significantly.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The Interstellar H Flow: Updated Analysis of SOHO/SWAN Data

We update two kinds of results obtained with the SWAN instrument on board SOHO. First, we use H cell data recorded in 2001 and derive the H flow direction in the same way the study was done at solar minimum. We again compare with the Helium flow direction and doing so correct for the coordinate system change between the Ulysses and SOHO missions. The deflection plane we obtain is compatible with our previous result within error bars, confirming the potential predominant role of the interstellar magnetic field. In a second part, we extend the computation of the interstellar H ionization as a function of heliographic latitude and time, a quantity which reflects closely the SW flux latitudinal structure. The pattern for the present solar minimum is strikingly different from the previous minimum, with a much wider slow solar wind equatorial belt which persists until at least 2008. Comparing with synoptic LASCO/C2 electron densities we infer from a preliminary study that the acceleration of the high speed solar wind occurs at a higher altitude during this minimum compared to the previous one, a difference expansion models must be able to reproduce.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Uncertainties of the Intensity of the 1130 nm Band of Water Vapor

Belmiloud, et al have recently suggested that the HITRAN line intensities in the 1130 nm water vapor band are much too weak. Giver, et at corrected unit conversion errors to make the HITRAN intensities compatible with the original measurements of Mandin, et al, but Belmiloud, et al believe that many of those line intensity measurements were too weak, and they propose the total intensity of the 1130 nm water vapor band is 38% stronger than the sum of the HITRAN line intensities in this region. We have made independent assessments of this proposal using 2 spectra obtained with the Ames 25 meter base path White cell. The first was made using the moderate resolution (8 nm) solar spectral flux radiometer (SSFR) flight instrument with a White cell absorbing path of 506 meters and 10 torr water vapor pressure. Modeling this spectrum using the HITRAN linelist gives a reasonable match, and the model is not compatible when the HITRAN line intensities are increased by 38%. The second spectrum was obtained with a White cell path of 1106 meters and 12 torr water vapor pressure, using a Bomem FTIR with near Doppler width resolution. This spectrum is useful for measuring intensities of isolated weak lines to compare with the measurements of Mandin, et al. Unfortunately, as Belmiloud et al point out, at these conditions the strong lines are much too saturated for good intensity measurements. Our measurements of the weak lines are in reasonable agreement with those of Mandin, et al. Neither of our spectra supports the proposal of Belmiloud et al for a general 38% increase of the absorption intensity in the 1130 nm water vapor band.

Giver, L. P.↗

Low-energy phenomenology of scalarless standard-model extensions with high-energy Lorentz violation

We consider renormalizable standard model extensions that violate Lorentz symmetry at high energies, but preserve CPT, and do not contain elementary scalar fields. A Nambu-Jona-Lasinio mechanism gives masses to fermions and gauge bosons and generates composite Higgs fields at low energies. We study the effective potential at the leading order of the large-N{sub c} expansion, prove that there exists a broken phase, and study the phase space. In general, the minimum may break invariance under boosts, rotations, and CPT, but we give evidence that there exists a Lorentz invariant phase. We study the spectrum of composite bosons and the low-energy theory in the Lorentz phase. Our approach predicts relations among the parameters of the low-energy theory. We find that such relations are compatible with the experimental data within theoretical errors. We also study the mixing among generations, the emergence of the CKM matrix, and neutrino oscillations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Chemical Composition of Young Stars in the Leading Arm of the Magellanic System

Chemical abundances of eight O- and B-type stars are determined from high-resolution spectra obtained with the MIKE instrument on the Magellan 6.5 m Clay telescope. The sample is selected from 42 candidates for membership in the Leading Arm (LA) of the Magellanic System. Stellar parameters are measured by two independent grids of model atmospheres and analysis procedures, confirming the consistency of the stellar parameter results. Abundances of seven elements (He, C, N, O, Mg, Si, and S) are determined for the stars, as are their radial velocities and estimates of distances and ages. Among the seven B-type stars analyzed, the five that have radial velocities compatible with membership of the LA have an average [Mg/H] of −0.42 ± 0.16, significantly lower than the average of the remaining two, [Mg/H] = −0.07±0.06, which are kinematical members of the Galactic disk. Among the five LA members, four have individual [Mg/H] abundance compatible with that in the LMC. Within errors, we cannot exclude the possibility that one of these stars has an [Mg/H] consistent with the more metal-poor, SMC-like material. The remaining fifth star has an [Mg/H] close to Milky Way values. Distances to the LA members indicate that they are at the edge of the Galactic disk, while ages are of the order of ∼50–70 Myr, lower than the dynamical age of the LA, suggesting a single star-forming episode in the LA. V {sub LSR} of the LA members decreases with decreasing Magellanic longitude, confirming the results of previous LA gas studies.

79 ASTRONOMY AND ASTROPHYSICS↗

Possible effects of the El Chichon volcanic cloud on the radiation budget of the northern tropics

A series of calculations with a one-dimensional, time-marching, radiative-convective model are performed to assess the impact of the El Chichon volcanic cloud on the radiation budget of the northern tropics during the 6-month period following the injection of volcanic material into the stratosphere. Extensive measurement of the cloud obtained from airborne, spacecraft, and ground platforms were used to define the model parameters and to test the predictions of the model. The El Chichon cloud is predicted to have caused an increase in planetary albedo of 10 percent, a decrease in total solar radiation of 2-3 percent at the ground on cloudless days, and an increase in temperature of 3.5 K at the 24-km (30-mb) level. These predictions are compatible with relevant observations, within their respective error bars.

Pollack, J. B.↗

System IDentification Programs for AirCraft (SIDPAC)

A collection of computer programs for aircraft system identification is described and demonstrated. The programs, collectively called System IDentification Programs for AirCraft, or SIDPAC, were developed in MATLAB as m-file functions. SIDPAC has been used successfully at NASA Langley Research Center with data from many different flight test programs and wind tunnel experiments. SIDPAC includes routines for experiment design, data conditioning, data compatibility analysis, model structure determination, equation-error and output-error parameter estimation in both the time and frequency domains, real-time and recursive parameter estimation, low order equivalent system identification, estimated parameter error calculation, linear and nonlinear simulation, plotting, and 3-D visualization. An overview of SIDPAC capabilities is provided, along with a demonstration of the use of SIDPAC with real flight test data from the NASA Glenn Twin Otter aircraft. The SIDPAC software is available without charge to U.S. citizens by request to the author, contingent on the requestor completing a NASA software usage agreement.

Morelli, Eugene A.↗

Protograph LDPC Codes with Node Degrees at Least 3

In this paper we present protograph codes with a small number of degree-3 nodes and one high degree node. The iterative decoding threshold for proposed rate 1/2 codes are lower, by about 0.2 dB, than the best known irregular LDPC codes with degree at least 3. The main motivation is to gain linear minimum distance to achieve low error floor. Also to construct rate-compatible protograph-based LDPC codes for fixed block length that simultaneously achieves low iterative decoding threshold and linear minimum distance. We start with a rate 1/2 protograph LDPC code with degree-3 nodes and one high degree node. Higher rate codes are obtained by connecting check nodes with degree-2 non-transmitted nodes. This is equivalent to constraint combining in the protograph. The condition where all constraints are combined corresponds to the highest rate code. This constraint must be connected to nodes of degree at least three for the graph to have linear minimum distance. Thus having node degree at least 3 for rate 1/2 guarantees linear minimum distance property to be preserved for higher rates. Through examples we show that the iterative decoding threshold as low as 0.544 dB can be achieved for small protographs with node degrees at least three. A family of low- to high-rate codes with minimum distance linearly increasing in block size and with capacity-approaching performance thresholds is presented. FPGA simulation results for a few example codes show that the proposed codes perform as predicted.

low density parity check (LDPC)↗

Magnetic Structure Determination Using Polarised Resonant X-ray Scattering

Full polarisation analysis of resonantX-ray magnetic scattering (RXMS) is shown to advance the determination of magnetic moment directions of complex magnetic structures within single crystals. Key features of this novel method are the variation of the incident beam polarisation through the use of an X-ray phase plate, and the measurement of the scattered beam polarisation in terms of Poincare-Stokes parameters. Contrary to the established method, no azimuthal rotation is required. Thus, the major sources of systematic error are eliminated, and the method is compatible with exotic and complex sample environments. The technique is demonstrated with the example of TbMn2O5. The RXMS theory briefly outlined in this paper was fitted to the data, and the local and delocalized, band-specific moment directions associated with the magnetic order of the resonating species was refined with a high degree of accuracy.

36 MATERIALS SCIENCE↗

Correcting errors in a quantum gate with pushed ions via optimal control

We analyze in detail the so-called pushing gate for trapped ions, introducing a time-dependent harmonic approximation for the external motion. We show how to extract the average fidelity for the gate from the resulting semiclassical simulations. We characterize and quantify precisely all types of errors coming from the quantum dynamics and reveal that slight nonlinearities in the ion-pushing force can have a dramatic effect on the adiabaticity of gate operation. By means of quantum optimal control techniques, we show how to suppress each of the resulting gate errors in order to reach a high fidelity compatible with scalable fault-tolerant quantum computing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bayesian inference of nuclear symmetry energy from measured and imagined neutron skin thickness in Sn 116 , 118 , 120 , 122 , 124 , 130 , 132 , Pb 208 , and Ca 48

The neutron skin thickness Δr np in heavy nuclei has been known as one of the most sensitive terrestrial probes of the nuclear symmetry energy E sym (ρ) around $\frac{2}{3}$ of the saturation density ρ 0 of nuclear matter. Existing neutron skin data mostly from hadronic observables suffer from large uncertainties and their extraction from experiments are often strongly model dependent. While waiting eagerly for the promised model-independent and high-precision neutron skin data for 208 Pb and 48 Ca from the parity-violating electron scattering experiments (PREX-II and CREX at JLab as well as MREX at MESA), within the Bayesian statistical framework using the Skyrme-Hartree-Fock model we infer the posterior probability distribution functions (PDFs) of the slope parameter L of the nuclear symmetry energy at ρ 0 from imagined Δr np ( 208 Pb)=0.15, 0.20, and 0.30 fm with a 1σ error bar of 0.02, 0.04, and 0.06 fm, respectively, as well as Δr np ( 48 Ca)=0.12, 0.15, and 0.25 fm, with different 1σ error bar of 0.01 and 0.02 fm, respectively. The results are compared with the PDFs of L inferred using the same approach from the available Δr np data for 116, 118, 120, 122, 124, 130, 132 Sn from hadronic probes. They are also compared with results from a recent Bayesian analysis of the radius and tidal deformability data of canonical neutron stars from GW170817 and NICER. The neutron skin data for Sn isotopes gives L = 45.5 $^{+ 26.5}_{-21.6}$ MeV surrounding its mean value or L = 53 . 4 $^{+ 18.6}_{ -29.5}$ MeV surrounding its maximum a posteriori value, respectively, with the latter smaller than but consistent with the L = 66 $^{+ 12}_{-20}$ MeV from the neutron star data within their 68% confidence intervals. We found that Δr np = 0.17 –0.18 fm in 208 Pb with an error bar of about 0.02 fm leads to a PDF of L compatible with that from analyzing the Sn data. To provide additionally useful information on L extracted from the Δr np of Sn isotopes, the experimental error bar of Δr np in 208 Pb should be at least smaller than 0.06 fm aimed by some current experiments. In addition, the Δr np ( 48 Ca) needs to be larger than 0.15 fm but smaller than 0.25 fm to be compatible with the Sn and/or neutron star results. To further improve our current knowledge about L and distinguish its PDFs in the examples considered, even higher precisions leading to significantly less than ±20 MeV error bars for L at 68% confidence level are necessary.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Transverse spin effects at COMPASS

The COMPASS experiment at the CERN SPS has a broad physics program focused on the nucleon spin structure and on hadron spectroscopy, using both muon and hadron beams. One of the main objectives for the spin program with the muon beam is the measurement of transverse spin effects in semi inclusive deep inelastic scattering. A longitudinally polarized 160 GeV/c muon beam is impinging on a transversely polarized target: from 2002 to 2004 a {sup 6}LiD(deuteron) target has been used, while during 2007 data taking a NH{sub 3}(proton) target was put in place. All measured transverse asymmetries on deuteron have been found to be small, and compatible with zero, within the few percent statistical errors. These results, which are currently used as input for global fits, can be interpreted as cancellation between u and d quark contribution in the deuteron. The first results for the Collins and Sivers asymmetries for charged hadrons from the 2007 proton COMPASS data are also presented and discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SCOPe: Structural Classification of Proteins—extended, integrating SCOP and ASTRAL data and classification of new structures

Structural Classification of Proteins—extended (SCOPe, http://scop.berkeley.edu) is a database of protein structural relationships that extends the SCOP database. SCOP is a manually curated ordering of domains from the majority of proteins of known structure in a hierarchy according to structural and evolutionary relationships. Development of the SCOP 1.x series concluded with SCOP 1.75. The ASTRAL compendium provides several databases and tools to aid in the analysis of the protein structures classified in SCOP, particularly through the use of their sequences. SCOPe extends version 1.75 of the SCOP database, using automated curation methods to classify many structures released since SCOP 1.75. We have rigorously benchmarked our automated methods to ensure that they are as accurate as manual curation, though there are many proteins to which our methods cannot be applied. SCOPe is also partially manually curated to correct some errors in SCOP. SCOPe aims to be backward compatible with SCOP, providing the same parseable files and a history of changes between all stable SCOP and SCOPe releases. SCOPe also incorporates and updates the ASTRAL database. The latest release of SCOPe, 2.03, contains 59 514 Protein Data Bank (PDB) entries, increasing the number of structures classified in SCOP by 55% and including more than 65% of the protein structures in the PDB.

59 BASIC BIOLOGICAL SCIENCES↗

The fortedata R package: open-science datasets from a manipulative experiment testing forest resilience

The fortedata R package is an open data notebook from the Forest Resilience Threshold Experiment (FoRTE) – a modeling and manipulative field experiment that tests the effects of disturbance severity and disturbance type on carbon cycling dynamics in a temperate forest. Package data consist of measurements of carbon pools and fluxes and ancillary measurements to help analyze and interpret carbon cycling over time. Currently the package includes data and metadata from the first three FoRTE field seasons, serves as a central, updatable resource for the FoRTE project team, and is intended as a resource for external users over the course of the experiment and in perpetuity. Further, it supports all associated FoRTE publications, analyses, and modeling efforts. This increases efficiency, consistency, compatibility, and productivity while minimizing duplicated effort and error propagation that can arise as a function of a large, distributed and collaborative effort. More broadly, fortedata represents an innovative, collaborative way of approaching science that unites and expedites the delivery of complementary datasets to the broader scientific community, increasing transparency and reproducibility of taxpayer-funded science. The fortedata package is available via GitHub: https://github.com/FoRTExperiment/fortedata (last access: 19 February 2021), and detailed documentation on the access, used, and applications of fortedata are available at https://fortexperiment.github.io/fortedata/ (last access: 19 February 2021). The first public release, version 1.0.1 is also archived at https://doi.org/10.5281/zenodo.4399601 (Atkins et al., 2020b). All data products are also available outside of the package as .csv files: https://doi.org/10.6084/m9.figshare.13499148.v1 (Atkins et al., 2020c).

97 MATHEMATICS AND COMPUTING↗

Soil, water, and vegetation conditions in south Texas

The author has identified the following significant results. Software development for a computer-aided crop and soil survey system is nearing completion. Computer-aided variety classification accuracies using LANDSAT-1 MSS data for a 600 hectare citrus farm were 83% for Redblush grapefruit and 91% for oranges. These accuracies indicate that there is good potential for computer-aided inventories of grapefruit and orange citrus orchards with LANDSAT-type MSS data. Mean digital values of clouds differed statistically from those for crop, soil, and water entities, and those for cloud shadows were enough lower than sunlit crop and soil to be distinguishable. The standard errors of estimate for the calibration of computer compatible tape coordinate system (pixel and record) to earth coordinate system (longitude and latitude) for 6 LANDSAT scenes ranged from 0.72 to 1.50 pixels and from 0.58 to 1.75 records.

Wiegand, C. L.↗

Building a new multiphysics workflow in MOOSE: application to tritium migration, trapping and advection in TMAP8

Fusion devices are anticipated to produce and consume several kilograms of tritium per year. This rare fuel resource is both highly mobile and radioactive, making tracking inventories a priority for operation and safety. The fusion safety program at the Idaho National Laboratory has been developing the Tritium Migration and Analysis Program (TMAP), of which the latest version is a MOOSE-based application. TMAP8 is verified against its predecessors and possesses additional multi-dimensional tritium migration modeling capabilities. As we extend its capabilities towards both whole device (in multiple dimensions) and whole plant (with multiple components) simulations, the syntax of inputs must become compact, descriptive, compatible with quality assurance processes, and as error-proof as achievable. The new Physics system developed MOOSE can set up equations and instantiating them on plant components. The system permits the automatic definition of complex discretization with a consistency between object parameters achieved programmatically. The Physics system can currently instantiate the equations for heat conduction and Navier Stokes weakly compressible flow. In MOOSE-terms, it automates the definition of kernels, boundary conditions, and several core and helper materials and fields. As part of this effort, Physics classes were developed for tritium migration, trapping and advection within either a multi-dimensional Navier Stokes fluid dynamics simulation, or a 1D thermal hydraulics piping system. In this presentation, we will showcase the new syntax, its application to several verification and validation cases which were already studied using the classical TMAP8 syntax, and a demonstration of the new coupling capabilities for the migration of tritium into blanket coolant channels and the subsequent advection into the coolant loop.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lateral shearing interferometry for high-NA EUV wavefront metrology

Copyright © 2018 SPIE. We present a lateral shearing interferometer suitable for high-NA EUV wavefront metrology. In this interferometer, a geometric model is used to accurately characterize and predict systematic errors that come from performing interferometry at high NA. This interferometer is compatible with various optical geometries, including systems where the image plane is tilted with respect to the optical axis, as in the Berkeley MET5. Simulation results show that the systematic errors in tilted geometries can be reduced by aligning the shearing interferometer grating and detector parallel to the image plane. Subsequent residual errors can be removed by linear fitting.

Zhu, Wenhua↗