Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Climate specialization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Throughfall-Reduction Drying Effects on Soil Moisture and Soil Temperature at 30-Minute Intervals Four Lowland Panamanian Forests

Objectives: Climatic drying is predicted for many tropical forests, yet effects on soil properties across moisture and soil gradients within tropical forests remain poorly characterized, hampering predictions of forest-climate feedbacks. We hypothesized that drying would suppress soil CO2 fluxes (i.e., respiration) in already-drier tropical forests by further reductions in soil moisture, but increases CO2 fluxes in wetter tropical forests by alleviating anaerobiosis and soil saturation. We measured soil CO2 fluxes, soil moisture, soil temperature, and forest floor biomass during wet-dry cycles (2015 – 2022) in four Panamanian forests that vary in rainfall and soil fertility. We also surveyed all tree species and identified to species in 2018 and 2019.Results: We found that soil moisture peaked in the wet season and declined in the dry season. Measured soil CO2 fluxes declined in the dry season and peaked in the early wet season ahead of peak soil moisture, resulting in a lower soil moisture optimum for respiration than previously modeled. Chronic throughfall exclusion also suppressed soil moisture across the four forests, and also initially suppressed soil CO2 fluxes across forests. There was sustained suppression of soil CO2 fluxes after four years in the wettest forest only (-28 ± 4% during the dry season), but elevated soil CO2 fluxes in a fertile forest after four years (+75 ± 28% during the late wet season). The unexpected negative drying effect in the wettest, most infertile forest could have resulted from reduced vertical flushing of nutrients into soils, as the drying effect increased with time. Including hydro-nutrient interactions in ecosystem models could improve predictions of tropical forest-climate feedbacks (Cusack et al. 2023). Datasets included: Datasets here include .csv and .xls files for volumetric soil moisture (volume/volume) and soil temperature (°C). Data were taken at 30-minute intervals at 5cm and 20cm depths using permanent probes and data loggers (see methods). Data presented are from 2018-2019. There is also a .kml file that includes coordinates for all 32 plots included in the study of four forests (n = 4 throughfall reduction and n = 4 control plots per site). No special software is needed to open these files.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Foreward: Advancing the U.S. Offshore Renewable Energy Industry through Marine Renewable and Offshore Wind Energy Development

Foreward to special issue of MTSJ Journal: Energy security … it’s what everyone is talking about, and for good reason. Against the backdrop of a changing climate in which nearly two-thirds of electricity generation is credited to fossil fuels (IEA, 2019a), countries around the world are diversifying their energy portfolios, suppliers, and energy routes to reduce vulnerabilities to energy security risks (U.S. Chamber of Commerce, 2020). Energy security concerns are related to fuel supply chains, electricity generation, transmission, distribution, energy market functionality, and energy system resiliency (DOE, 2017). These concerns demonstrate the need for well-functioning and competitive energy markets and diverse sources and routes of energy supply (DOE, 2017). In addition, environmental protection, efficiency and infrastructure improvements, energy innovation, emergency response, and resilience are also needed (DOE, 2017). Renewable energy generation is, and will continue to be, a major contributor in energy portfolio diversification, which will reduce reliance on foreign energy sources (IEA, 2019b; Aslantürk & Kiprizli, 2020) and support global decarbonization (Sims, 2004; Rockström et al., 2017; Arabzadeh et al., 2020).

marine renewable energy (MRE), offshore wind energ↗
DOE OSTI2021

Heat Transfer, Refrigeration and Heat Pumps

The Special Issue entitled “Heat Transfer, Refrigeration and heat Pumps” accepted papers covering a wide range of topics related to heat pumps, thermal energy storage, and low-Global Warming Potential (GWP) alternative refrigerants. Heat pumps play a vital role in providing space conditioning and water heating while utilizing the energy of the environment. Since heat pumps use renewable thermal energy from the environs to provide the desired utility, they contribute to the portfolio of technologies that mitigate carbon footprint. The heat pump may be considered a truly renewable technology if the electricity it uses comes entirely from a renewable source. More accurately, a heat pump is a “low carbon technology”. These perspectives make heat pumps an indispensable option for the future in order to reduce the nocuous human impact on the environment. More efficient heat pumping technologies are being developed for the residential, commercial, and industrial sectors of the economy. Another R&D thrust is heat pumps for cold climates. Hardware components, use of low-GWP refrigerants, and identification of systemic inefficiencies are active research areas. This article is a synopsis of the papers submitted to the Special Issue.

42 ENGINEERING↗
DOE OSTI2023

Climate change–induced stress disrupts ectomycorrhizal interaction networks at the boreal–temperate ecotone

The interaction networks formed by ectomycorrhizal fungi (EMF) and their tree hosts, which are important to both forest recruitment and ecosystem carbon and nutrient retention, may be particularly susceptible to climate change at the boreal–temperate forest ecotone where environmental conditions are changing rapidly. Here, we quantified the compositional and functional trait responses of EMF communities and their interaction networks with two boreal ( Pinus banksiana and Betula papyrifera ) and two temperate ( Pinus strobus and Quercus macrocarpa ) hosts to a factorial combination of experimentally elevated temperatures and reduced rainfall in a long-term open-air field experiment. The study was conducted at the B4WarmED (Boreal Forest Warming at an Ecotone in Danger) experiment in Minnesota, USA, where infrared lamps and buried heating cables elevate temperatures (ambient, +3.1 °C) and rain-out shelters reduce growing season precipitation (ambient, ~30% reduction). EMF communities were characterized and interaction networks inferred from metabarcoding of fungal-colonized root tips. Warming and rainfall reduction significantly altered EMF community composition, leading to an increase in the relative abundance of EMF with contact-short distance exploration types. These compositional changes, which likely limited the capacity for mycelial connections between trees, corresponded with shifts from highly redundant EMF interaction networks under ambient conditions to less redundant (more specialized) networks. Further, the observed changes in EMF communities and interaction networks were correlated with changes in soil moisture and host photosynthesis. Collectively, these results indicate that the projected changes in climate will likely lead to significant shifts in the traits, structure, and integrity of EMF communities as well as their interaction networks in forest ecosystems at the boreal–temperate ecotone.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The status and prospects of materials for carbon capture technologies

In order to combat climate change, carbon dioxide (CO 2 ) emissions from industry, transportation, buildings, and other sources need to be captured and long-term stored. Decarbonization of these sources requires special types of materials that have high affinities for CO 2 . Potassium hydroxide is a benchmark aqueous sorbent that reacts with CO 2 to convert it into K 2 CO 3 and subsequently precipitated as CaCO 3 . Another class of carbon capture materials is solid sorbents that are usually functionalized with amines or have natural affinities for CO 2 . The next wave of materials for carbon capture under investigation includes activated carbon, metal–organic frameworks, zeolites, carbon nanotubes, and ionic liquids. In this issue of MRS Bulletin, some of these materials are highlighted, including solvents and sorbents, membranes, ionic liquids, and hydrides. Other materials that can capture CO2 from low concentrations of gas streams, such as air (direct air capture) are also discussed. Also covered in this issue are machine learning-based computer algorithms developed with the goal to speed up the progress of carbon capture materials development, and to design advanced materials with high CO 2 capacity, improved capture and release kinetics, and improved cyclic durability.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Climate Impact of Primary Plastic Production

Plastics show the strongest production growth of all bulk materials over the last decade. The industry’s current growth trajectory is exponential and plastic production is expected to double or triple by 2050. The rapidly increasing production of plastics and the continued reliance on fossil fuels for production, have contributed to numerous environmental problems and health harms. As a result, plastic pollution has become an increasing threat to natural ecosystems, human health and climate. However, there is a lack of granularity on the contribution of the primary plastics specifically to greenhouse gas (GHG) emissions and their impact on the remaining global carbon budget needed to stay below a 1.5°C or 2°C global average temperature rise. In this report, we explore the contribution of primary plastic production to climate change disaggregated by polymer and technology. To this end, we have developed comprehensive bottom-up modeling of GHG emissions from global primary plastic production, with a special focus on polymer value chains. We have analyzed the results under various growth scenarios in the context of carbon budgets compatible with a 1.5°C global trajectory. Modeling includes the material flows of all production stages, processes and technologies used in primary plastic production value chains, including from the extraction of fossil fuels required for production to shaping the final product. We specifically focus on nine major types of fossil fuelbased plastic polymers that are produced and consumed in large quantities: three types of polyethylene (PE) – low-density (LDPE), linear low-density (LLDPE), and high-density (HDPE) – as well as polypropylene (PP); polyethylene terephthalate (PET); polyvinyl chloride (PVC); polystyrene (PS) and other key styrene-based plastics such as styrene acrylonitrile (SAN) and acrylonitrile butadiene styrene (ABS), and polyurethane (PU). Together these account for about 80% of plastics production.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Climate Impact of Primary Plastic Production

Plastics show the strongest production growth of all bulk materials over the last decade. The industry’s current growth trajectory is exponential and plastic production is expected to double or triple by 2050. The rapidly increasing production of plastics and the continued reliance on fossil fuels for production, have contributed to numerous environmental problems and health harms. As a result, plastic pollution has become an increasing threat to natural ecosystems, human health and climate. However, there is a lack of granularity on the contribution of the primary plastics specifically to greenhouse gas (GHG) emissions and their impact on the remaining global carbon budget needed to stay below a 1.5°C or 2°C global average temperature rise. In this report, we explore the contribution of primary plastic production to climate change disaggregated by polymer and technology. To this end, we have developed comprehensive bottom-up modeling of GHG emissions from global primary plastic production, with a special focus on polymer value chains. We have analyzed the results under various growth scenarios in the context of carbon budgets compatible with a 1.5°C global trajectory. Modeling includes the material flows of all production stages, processes and technologies used in primary plastic production value chains, including from the extraction of fossil fuels required for production to shaping the final product. We specifically focus on nine major types of fossil fuel-based plastic polymers that are produced and consumed in large quantities: three types of polyethylene (PE) – low-density (LDPE), linear low-density (LLDPE), and high-density (HDPE) – as well as polypropylene (PP); polyethylene terephthalate (PET); polyvinyl chloride (PVC); polystyrene (PS) and other key styrene-based plastics such as styrene acrylonitrile (SAN) and acrylonitrile butadiene styrene (ABS), and polyurethane (PU). Together these account for about 80% of plastics production.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Integration of Electrolysis Systems Into Isolated Microgrid Systems at Extreme Cold Climates

Isolated microgrid systems are generally used to power communities in remote locations where transmission line installations are cost prohibitive. These systems are usually powered by diesel generators, delivering expensive energy with high carbon emissions. However, most of these communities have special geographic access to renewable energy. These special conditions make it interesting to investigate the deployment of renewable energies and storage solutions. Within this scope, this paper analyses the integration of water electrolysis systems into off-grid communities, simulating the electrolyzer as well as the whole electrical grid in real time.

digital real-time simulation↗
DOE OSTI2023

Wind Energy Accomplishments and Year-End Performance Report: Fiscal Year 2023

As the United States' largest source of renewable energy, wind is already playing a vital role in the nation's shift to electricity generated from sustainable resources. Scientists, engineers, and analysts at the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) are propelling our country closer to this clean energy future with new efficient, reliable, and cost-competitive wind technologies and deployment strategies. In Fiscal Year 2023 (FY 2023), NREL received national acclaim for recent wind technology breakthroughs, applauded sustained decades of progress in wind energy research, and heralded new initiatives to support the next generation of wind development. This report and NREL's achievements of the last year set the stage for innovative research to come. Two NREL software innovations used to assess wind technology options were recognized with R&D 100 Awards. The Renewable Energy Potential (reV) model helps planners, developers, and researchers calculate wind energy capacity, generation, and cost for specific facilities, fleets and scenarios. NREL's Simulation and Emulation for Advanced Systems validates transmission and distribution solutions to minimize implementation risks. Both of these tools can be applied to a range of renewable solutions to cut costs and improve the reliability of systems in even the most remote locations. The laboratory commemorated landmark anniversaries for wind energy research facilities and programs managed by NREL. The National Wind Technology Center (NWTC) celebrated 30 years as a world-class hub for renewable energy research. An important component of the NWTC on NREL's Flatirons Campus, the one-of-a-kind 7-megawatt (MW) Controllable Grid Interface wind energy research apparatus, turned 10 this year. The Collegiate Wind Competition completed its tenth annual competition in May 2023. Six years after the grand challenges in wind energy science were first compiled, NREL brought together more than 100 wind energy experts from 15 countries to revisit the field's most pressing research needs. Other key new research initiatives examined ways to simultaneously address the needs for skilled wind energy workers and equitable job opportunities. NREL released the first national-level report evaluating offshore wind industry workforce gaps and ways to build a large, diverse pool of job candidates. The lab also co-hosted the International Partnering Forum's Offshore Wind Workforce Summit as part of its ongoing efforts to address the special challenges of that industry sector. NREL research and development (R&D) for the DOE Wind Energy Technologies Office (WETO) continues to build momentum in its efforts to combat climate change, create clean energy jobs, and promote energy justice. This report provides more detail on these top achievements and other accomplishments made by NREL and its partners during FY 2023 (between Oct. 1, 2022, and Sept. 30, 2023).

accomplishments↗
DOE OSTI2024

Importance of viewing angle: Hotspot effect improves the ability of satellites to track terrestrial photosynthesis

The product of near-infrared reflectance of vegetation and photosynthetic active radiation (NIRvP) is a new tool for monitoring gross primary productivity (GPP) dynamics in terrestrial ecosystems, due to the discovered linear correlation between NIRvP and GPP. While remote sensing-based NIRvP is considerably influenced by sensor geometry, such geometry impacts on the NIRvP-GPP relationship remain underexplored. In this study, we calculate NIRvP using observations from the Deep Space Climate Observatory (DSCOVR) that provide unique hotspot observation geometry in which the sensor viewing angle coincides with the sun direction. We evaluated the linear correlation between NIRvP and GPP in both the common nadir direction and the special hotspot direction. The results indicate that NIRvP in the hotspot direction significantly outperforms that in the nadir direction for tracking GPP variations across different ecosystems from diurnal to daily scales. This conclusion is further supported by data from the MODerate resolution Imaging Spectroradiometer (MODIS) and simulations using the Soil Canopy Observation Photosynthesis Energy (SCOPE) model. Finally, our research highlights the value of using the unconventional hotspot-based sun-tracking satellite observations for a more accurate characterization of GPP dynamics in terrestrial ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Accomplishments and Year-End Performance Report; Wind Energy Program: Fiscal Year 2021

The National Wind Technology Center (NWTC), located at the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) Flatirons Campus, has been a driving force in advancing wind energy technology research worldwide since its designation as a DOE national research center in 1992. Enabled by the Flatirons Campus's world-class facilities, scientists, engineers, analysts, and researchers are pushing the frontiers of science to pursue wind energy innovation. In Fiscal Year (FY) 2021, NREL continued to provide the technical expertise, research capabilities, and industry understanding to support DOE's ambitious climate action and research goals by advancing technology, addressing market and deployment barriers, and driving down costs with more efficient, reliable, and predictable wind energy systems. One of several highlights, NREL received an R&D 100 Special Recognition Award for its Thermoplastic Resin System for Wind Turbine Blades. This breakthrough in the wind turbine manufacturing process will enable the production of recyclable blades that are stronger, longer, and less expensive, while increasing energy capture, decreasing energy and transportation costs, and increasing blade reliability. In a year when the entire U.S. economy struggled to address workforce gaps, an NREL study compared wind industry needs, training programs, and hiring practices with perspectives from students and recent college graduates. Researchers hope that, by pinpointing areas of disconnect, the expectations of employers who have difficulty filling entry-level jobs can better align with the preparation of the potential applicants who find it hard to break into the field. The lab also made numerous new data and modeling resources available in FY 2021. Recent NREL releases include a modeling tool for predicting the power performance and structural loads of wind turbines within a wind farm (FAST.Farm), a computational framework for modeling golden eagle behavior near wind farms, and 20 years of offshore wind data. Updates were also made to the widely used Wind Plant Integrated Systems Design and Engineering Model (WISDEM), which couples engineering and cost models to examine system-level trade-offs. Now, bolstered by a renewed national commitment to tackle climate change and revitalize the U.S. economy through increased investment in clean energy - particularly in offshore wind energy - NREL stands poised to lead the way to a sustainable future that powers the United States with significant levels of reliable, low-cost, accessible wind energy. This report provides an overview of the achievements NREL made on behalf of DOE's Wind Energy Technologies Office (WETO) and other partners during FY 2021 (between Oct. 1, 2020, and Sept. 30, 2021).

Flatirons Campus↗
DOE OSTI2022

Albedo-Induced Global Warming Impact at Multiple Temporal Scales within an Upper Midwest USA Watershed

Land surface albedo is a significant regulator of climate. Changes in land use worldwide have greatly reshaped landscapes in the recent decades. Deforestation, agricultural development, and urban expansion alter land surface albedo, each with unique influences on shortwave radiative forcing and global warming impact (GWI). Here, we characterize the changes in landscape albedo-induced GWI (GWI Δα ) at multiple temporal scales, with a special focus on the seasonal and monthly GWI Δα over a 19-year period for different land cover types in five ecoregions within a watershed in the upper Midwest USA. The results show that land cover changes from the original forest exhibited a net cooling effect, with contributions of annual GWI Δα varying by cover type and ecoregion. Seasonal and monthly variations of the GWI Δα showed unique trends over the 19-year period and contributed differently to the total GWI Δα . Cropland contributed most to cooling the local climate, with seasonal and monthly offsets of 18% and 83%, respectively, of the annual greenhouse gas emissions of maize fields in the same area. Urban areas exhibited both cooling and warming effects. Cropland and urban areas showed significantly different seasonal GWI Δα at some ecoregions. The landscape composition of the five ecoregions could cause different net landscape GWI Δα .

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Arctic extreme precipitation changes from 1980 to 2022 in response to sea ice decline and enhanced atmospheric rivers

Arctic extreme precipitation (EP) broadly impacts permafrost degradation, glacier and snow cover changes, and ice sheet mass balance as well as ecosystems. However, investigation of EP spatiotemporal variations over the Arctic remains challenging, and their primary drivers are still poorly understood. Performance estimation of three state-of-the-art reanalysis products (Climate Forecast System Reanalysis (CFSR), European Centre for Medium-Range Weather Forecasts Reanalysis version 5 (ERA-5), and Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2)) against gauge-based precipitation observations reveals that MERRA-2 outperforms other reanalysis for Arctic EP changes. Based on MERRA-2 data, both annual EP amount and occurrence days averaged over the Arctic show statistically significant positive trends during 1980–2022 (3.37 ± 1.03 mm dec −1 and 0.42 ± 0.17 d dec −1 , respectively), with the most pronounced increase in the autumn. Spatial heterogeneity in annual and seasonal EP trends is found across the Arctic, with the largest positive annual trends of 30 mm dec −1 over the Bering Sea and the Denmark Strait. The significant EP increase is closely associated with intensified atmospheric rivers (ARs) and widespread decline in sea ice concentration (SIC). Specially, SIC and ARs are responsible for 12% and 50% of Arctic EP inter-annual variance, respectively, while ARs directly contribute 28.3% of the total annual EP amounts. These findings explain the mechanistic controls on Arctic EP, providing critical insights for projecting polar weather and climate extremes and their impacts on the Arctic environment.

atmospheric rivers↗
DOE OSTI2024

Recent Advances in Assessing Environmental Effects of Marine Renewable Energy Around the World

Marine renewable energy (MRE) is increasingly of interest to coastal nations as a source of renewable energy that can support climate change mitigation goals as well as provide secure locally-produced energy for coastal and island communities. MRE extracts power from tidal streams, waves, ocean currents, run of rivers, and gradients in the ocean, with specialized devices developed and tested for each energy resource. Alongside development of MRE technologies and systems, first in Europe and then in North America, Australia, Asia, and other regions, it has been universally recognized that there is also a need to examine potential effects on marine animals, habitats, ecosystem processes, local communities and other sea users, to ensure that the MRE industry can be developed in a responsible and sustainable manner. This paper looks at the status of assessment and monitoring for potential environmental effects associated with MRE projects around the world. Over 80 projects were identified worldwide as having been tested, demonstrated, or commercially deployed with associated environmental monitoring. Five of the projects that represent tidal stream, wave, and run of river projects are examined in more detail to determine the types of data and information collected for those projects, the outputs of the monitoring campaigns, and the actions taken as a result of the data collection and analysis. Recommendations are provided for standardization of the monitoring approaches, instruments, and analysis methods at MRE project sites worldwide.

marine renewable energy, environmental effects, ri↗
DOE OSTI2022

Ideas and perspectives: Enhancing research and monitoring of carbon pools and land-to-atmosphere greenhouse gases exchange in developing countries

Carbon (C) and greenhouse gas (GHG) research has traditionally required data collection and analysis using advanced and often expensive instruments, complex and proprietary software, and highly specialized research technicians. Partly as a result, relatively little C and GHG research has been conducted in resource-constrained developing countries. At the same time, these are often the same countries and regions in which climate change impacts will likely be strongest and in which major science uncertainties are centered, given the importance of dryland and tropical systems to the global C cycle. Increasingly, scientific communities have adopted appropriate technology and approach (AT&A) for C and GHG research, which focuses on low-cost and low-technology instruments, open-source software and data, and participatory and networking-based research approaches. Adopting AT&A can mean acquiring data with fewer technical constraints and lower economic burden and is thus a strategy for enhancing C and GHG research in developing countries. However, AT&A can have higher uncertainties; these can often be mitigated by carefully designing experiments, providing clear protocols for data collection, and monitoring and validating the quality of obtained data. For implementing this approach in developing countries, it is first necessary to recognize the scientific and moral importance of AT&A. At the same time, new AT&A techniques should be identified and further developed. All these processes should be promoted in collaboration with local researchers and through training local staff and encouraged for wide use and further innovation in developing countries.

Kim, Dong-Gill↗
DOE OSTI2021

Process Systems Engineering Perspective on the Design of Materials and Molecules

This paper aims to provide an overview of the current state of the art in molecule and material design and a perspective on open questions. First, we discuss the interplay between process design and the design of molecules and materials and then present the basic trade-offs and interdependencies that need to be considered in this integrated design problem. Second, we introduce methods and open questions in the area of processing materials, with special emphasis placed on heterogeneous catalysts due to their importance in the chemical industry. Finally, we discuss materials for photovoltaic cells as one example of a chemical product that is likely to help supply sustainable energy and address climate change concerns. This information presented here is based on presentations and discussions during the FIPSE-4 meeting in June 2018 (https://www.fi-in-pse.org/fipse-4- 2018).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Path Properties of Atmospheric Transitions: Illustration with a Low-Order Sudden Stratospheric Warming Model

Many rare weather events, including hurricanes, droughts, and floods, dramatically impact human life. To accurately forecast these events and characterize their climatology requires specialized mathematical techniques to fully leverage the limited data that are available. Here we describe transition path theory (TPT), a framework originally developed for molecular simulation, and argue that it is a useful paradigm for developing mechanistic understanding of rare climate events. TPT provides a method to calculate statistical properties of the paths into the event. As an initial demonstration of the utility of TPT, we analyze a low-order model of sudden stratospheric warming (SSW), a dramatic disturbance to the polar vortex that can induce extreme cold spells at the surface in the midlatitudes. SSW events pose a major challenge for seasonal weather prediction because of their rapid, complex onset and development. Climate models struggle to capture the long-term statistics of SSW, owing to their diversity and intermittent nature. We use a stochastically forced Holton–Mass-type model with two stable states, corresponding to radiative equilibrium and a vacillating SSW-like regime. In this stochastic bistable setting, from certain probabilistic forecasts TPT facilitates estimation of dominant transition pathways and return times of transitions. These “dynamical statistics” are obtained by solving partial differential equations in the model’s phase space. With future application to more complex models, TPT and its constituent quantities promise to improve the predictability of extreme weather events through both generation and principled evaluation of forecasts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Powering the Blue Economy: Foundational Research and Development

With increased use of the oceans for transportation, extraction of food, fibre, and minerals, recreation and tourism, and other blue economy industries, there is a need for additional power at sea. In the face of climate change, the increased power must come from renewable sources; often marine energy is the most energy-dense power source available. But we have little experience with adapting wave and tidal devices from large scale grid power to the specialized and small devices needed to power blue economy applications, nor the engineering solutions to support codesign of emerging marine industries. As directed by the U.S. Department of Energy (DOE), two DOE national laboratories have developed foundational research and development projects to replace conventional power or batteries at sea (ocean observation platforms), emerging industry power needs (offshore aquaculture operations), as well as examining common challenges for using marine power (efficient power systems, minimizing interference, optimizing materials and manufacturing).

marine energy↗