Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Chain rigidity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Simulation of spacecraft attitude dynamics using TREETOPS and model-specific computer Codes

The simulation of spacecraft attitude dynamics and control using the generic, multi-body code called TREETOPS and other codes written especially to simulate particular systems is discussed. Differences in the methods used to derive equations of motion--Kane's method for TREETOPS and the Lagrangian and Newton-Euler methods, respectively, for the other two codes--are considered. Simulation results from the TREETOPS code are compared with those from the other two codes for two example systems. One system is a chain of rigid bodies; the other consists of two rigid bodies attached to a flexible base body. Since the computer codes were developed independently, consistent results serve as a verification of the correctness of all the programs. Differences in the results are discussed. Results for the two-rigid-body, one-flexible-body system are useful also as information on multi-body, flexible, pointing payload dynamics.

Cochran, John E.↗
NASA NTRS1999

Dynamics of Single Chains of Suspended Ferrofluid Particles

We present an experimental study of the dynamics of isolated chains made of super-paramagnetic particles under the influence of a magnetic field. The motivation of this work is to understand if the chain fluctuations exist and, if it does, how does the fluctuation affect chain aggregation. We find that single chains strongly fluctuate and that the characteristic frequency of their fluctuations is inversely proportional to the magnetic field strength. The higher the field the lower the characteristic frequency of the chain fluctuations. In the high magnetic field limit, chains behave like rigid rods without any internal motions. In this work, we used ferrofluid particles suspended in water. These particles do not have any intrinsic magnetization. Once a magnetic field is applied, a dipole moment is induced in each particle, proportional to the magnetic field. A dipolar magnetic interaction then occurs between particles. If dipole-dipole magnetic energy is higher than the thermal energy, the result is a structure change inside the dipolar fluid. The ratio of these two energies is expressed by a coupling constant lambda as: lambda = (pi(a(exp 3))(chi(exp 2))(mu(sub 0))(H(sub 0))(exp 2))/18kT Where a is the particle radius, mu(sub 0) is the vacuum magnetic permeability, H(sub 0) the applied magnetic field, k the Boltzmann constant and T the absolute temperature. If lambda > 1, magnetic particles form chains along the field direction. The lateral coalescence of several chains may form bigger aggregates especially if the particle volume fraction is high. While many studies and applications deal with the rheological properties and the structural changes of these dipolar fluids, this work focuses on the understanding of the chain dynamics. In order to probe the chain dynamics, we used dynamic light scattering (DLS) in self-beating mode as our experimental technique. The experimental geometry is such that the scattering plane is perpendicular to the magnetic field. Therefore, only motions in this plane are probed. A very dilute sample of a ferrofluid emulsion with a particle volume fraction of 10(exp -5) is used in this experiment. We chose such a low volume fraction to avoid multiple light scattering as well as lateral chain-chain aggregation. DLS measures the dynamic structure factor S(q,t) of the sample (q is the scattering wave vector, t is the time). In the absence of the magnetic field, identical particles of ferrofluid droplets are randomly distributed and S(q,t) reduces to exp(-q(exp 2)2D(sub 0)t). D(sub 0)=(kT/(6(pi)(eta)(a)) is the diffusion coefficient of Brownian particles (where Xi = (6(pi)(eta)(a)) is the Stokes frictional coefficient of a spherical particle in a fluid of viscosity eta). If interactions or polydispersity can not be ignored, an effective diffusion coefficient is introduced. Formally, D(sub eff) is defined as: D(sub eff) = - q(exp -2) partial derivative of (ln(S(q,t)) with respect to time, as t goes to 0. D(sub eff) reduces to D(sub 0) if no interactions and only a few particles size are present. Therefore, we can use DLS to measure particle size. The particle radius was found to be a=0.23 mu m with 7% of polydispersity. In this case, if we vary the scattering angle theta (and so q) we do not have any change in the measured diffusion coefficient: it is q-independent. When a magnetic field is applied, particles aggregate into chains if lambda > 1. We first studied the kinetics of the chain formation when lambda = 406. At a fixed scattering angle, we measured diffusion coefficient D(sub eff) as a function of time. Experimentally, we find that D(sub eff) decreases monotonously with time. Physically, this means that chains are becoming longer and longer. Since we are only sensitive to motions in the scattering plane and since chains have their main axis perpendicular to this plane, the measured diffusion coefficient is the trans-verse diffusion coefficient. We can relate D(sub eff) to the mean number of particles per chain N(t) at a given time and to the diffusion coefficient of an isolated particle D(sub 0) as D(sub eff)=f(N(t))D(sub 0). Since f(N) is known from other recent work, N can be expressed as a function of the time. We found a square root dependency: N(t) proportional to the square root of t. As expected for very low volume fraction, this behavior is characteristic of a diffusion-limited aggregation as suggested by several authors and by our previous work. In this study, we focus on the dependence of the effective diffusion coefficient on the scattering angle and the magnetic field strength. After the magnetic field is applied (lambda = 406) for a long time, typically 6 hours, kinetics of chain formation becomes very slow. Chain size does not vary much over the next hour period. Thus, we can perform different interesting experiments. First, at a fixed magnetic field, we measure the effective diffusion coefficient as a function of the scattering angle (from 5 to 130 deg). Our results show that the measured diffusion coefficient increases linearly with the scattering angle: D(sub eff) proportional to q. If we do the same experiment for different lambda values, D(sub eff) depends on lambda as D(sub eff) proportional to lambda(exp -1/2). We also find for different lambda values that the same asymptotic D(sub eff) value is obtained when q approaches zero. The angle dependency of D(sub eff) suggests that an additional motion exists besides chain drifting. Chain size is constant during experiment, which was verified by measuring the same diffusion coefficient at the beginning and at the end of the angle switching. If chains are rigid, D(sub eff) is independent of q. Therefore, we found that D(sub eff) not only measures the motion of the entire chain but also its internal fluctuations. These internal motions are the fluctuations of the particles in the chain. To understand the q dependency of D(sub eff), let us look at the probing length used. In our study, the characteristic length scale probed is l=2pi/q which is in the range of 0.9<l/a<20. When l is much larger than the particle radius (l/a going to infinity) we are mainly sensitive to the center of mass diffusion of the chain. D(sub eff) is then the diffusion of the entire chain and depends only on N but not on q and lambda. The value D(sub eff) allows us to obtain the number of particles per chain N. In the opposite limit (i.e. l/a < 1), we are sensitive to motions on the size of individual particles. The main contributions to the measured diffusion coefficient come from internal motions of the chains (i.e. particles' fluctuations inside the chain). We investigated also the effect of the chain size on D(sub eff). For the same value of the magnetic interaction lambda and different chain sizes, we found that the slope of D(sub eff) versus q decreases when N increases as a power law D(sub eff) proportional to N(exp -0.7). This is an important behavior because this means that the longer the chain the slower its internal fluctuations besides the whole chain motion.

Cutillas, S.↗
DOE OSTI2024

Quasi-elastic neutron scattering study on dynamically asymmetric polymer blends

Compatibility between polymers with different glass transition temperatures controls the thermomechanical properties of blends. This work explores the segmental dynamics of poly(methyl acrylate) (PMA) chains when they are blended with polymers of different rigidities and miscibility. Inspired by the intriguing dynamic asymmetry of chains within the interfacial layer of nanoparticles, this study aims to understand dynamic heterogeneity in dynamically asymmetric blends of PMA/poly(methyl methacrylate) (PMMA), PMA/polystyrene (PS), and PMA/poly(ethylene oxide) (PEO) using the differential scanning calorimetry (DSC) and quasi-elastic neutron scattering (QENS) measurements below and above the glass transition temperature of PMMA or PS. Further, results revealed that the segmental jump distance of PMA increased on blending due to volume enhancement. The reduced effective diffusivity of PMA in PMMA is attributed to PMMA's enhanced flexibility (lower characteristic ratio, C ∞ ) and superior interaction (lower ) when compared with the PS environment. The results demonstrate that the chain rigidity and miscibility affect the free volume, interchain cooperativity, and segmental dynamics in dynamically asymmetric blends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Robust chain aggregation of low-entropy rigid ladder polymers in solution

Conjugated polymers have been widely investigated where ladder-type conjugated polymers receive more attention due to their rigid backbones and extraordinary properties. However, the understanding of how the rigid conformation of ladder polymers translates to material properties is still limited. Here, we systematically investigated the solution aggregation properties of a carbazole-derived conjugated ladder polymer (LP) and its analogous non-ladder control polymer (CP) via light scattering, neutron scattering, and UV-vis absorption spectroscopy characterization techniques, revealing a highly robust, temperature-insensitive aggregation behavior of the LP. The experimental findings were further validated by computational molecular dynamics simulations. Here we found that the peak positions and intensities of the UV spectra of the LP remained constant between 20 °C and 120 °C in chlorobenzene solution. The polymer also showed a stable hydrodynamic radius measured by dynamic light scattering from 20 °C to 70 °C in the chlorobenzene solution. Using small-angle neutron scattering, no Guinier region was reached in the measured q range down to 0.008 Å –1 , even at elevated temperature. In contrast, the non-ladder control polymer CP was fully soluble in the chlorobenzene solvent without the observation of any notable aggregates. The Brownian dynamics simulation showed that during polymer aggregation, the entropy change of the LP was significantly less negative than that of the non-ladder control polymer. These findings revealed the low entropy nature of rigid conjugated ladder polymers and the low entropy penalty for their aggregation, which is promising for highly robust intermolecular interactions at high temperatures. Such a unique thermodynamic feature of rigid ladder polymers can be leveraged in the design and application of next-generation electronic and optoelectronic devices that function under unconventional high temperature conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A statistical mechanics framework for polymer chain scission, based on the concepts of distorted bond potential and asymptotic matching

To design increasingly tough, resilient, and fatigue-resistant elastomers and hydrogels, the relationship between controllable network parameters at the molecular level (bond type, non-uniform chain length, entanglement density, etc.) to macroscopic quantities that govern damage and failure must be established. Many of the most successful constitutive models for elastomers have been rooted in statistical mechanical treatments of polymer chains. Typically, such constitutive models have used variants of the freely jointed chain model with rigid links. However, since the free energy state of a polymer chain is dominated by enthalpic bond distortion effects as the chain approaches its rupture point, bond extensibility ought to be accounted for if the model is intended to capture chain rupture. To that end, a new bond potential is supplemented to the freely jointed chain model (as derived in the u FJC framework of Buche and Silberstein (2021) and Buche et al. (2022)), which we have extended to yield a tractable, closed-form model of single chain behavior that should be amenable to continuum-level constitutive model development. Inspired by the asymptotically matched u FJC model response in both the low/intermediate chain force and high chain force regimes, a simple, quasi-polynomial bond potential energy function is derived. This bond potential exhibits harmonic behavior near the equilibrium state and anharmonic behavior for large bond stretches tending to a characteristic energy plateau (akin to the Lennard-Jones and Morse bond potentials). Using this bond potential, approximate yet highly-accurate analytical functions for bond stretch and chain force dependent upon chain stretch are established. Then, using this polymer chain model, a stochastic thermal fluctuation-driven chain rupture framework is developed. This framework is based upon a force-modified tilted bond potential that accounts for distortional bond potential energy, allowing for the derivation and subsequent calculation of the dissipated chain scission energy. Here, the cases of rate-dependent and rate-independent scission are accounted for throughout the rupture framework. The impact of Kuhn segment number on chain rupture behavior is also investigated. The model is fit to single chain mechanical response data collected from atomic force microscopy tensile tests for validation and to glean deeper insight into the molecular physics taking place. Due to their analytical nature, this polymer chain model and the associated rupture framework can in the future be implemented in finite element models accounting for fracture and fatigue in polydisperse elastomer networks.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Structure and dynamics of ILs-based gel polymer electrolytes and its enhanced conductive properties with the incorporation of Al 2 O 3 nanofibers

Here, this work reports the enhanced mobility of ions in ionic liquid (IL)-based gel polymer electrolytes (GPEs) with the incorporation of Al 2 O 3 nanofibers. A combination of PVDF-HFP, EMIMTFSI and LiTFSI with 3 wt% Al 2 O 3 nanofibers has been prepared through solution casting technique. The room temperature ionic conductivity of PVDF-HFP: ILs electrolyte (45:55, weight ratio of 0.82) (GPE) is found to be 2.7 × 10 –5 S cm –1 , which increases up to 7.8 × 10 –5 S cm –1 in Al 2 O 3 containing GPE (Al-GPE). Pulsed field gradient (PFG) NMR results validate the increased ionic conductivity observed in Al-GPE. We found that the diffusivity of Li + , TFSI – and EMIM + increases when Al 2 O 3 nanofibers are well-distributed in the GPE matrix. The surface morphology and the amorphicity of GPEs are examined through SEM and XRD analyses. Lastly, the local structure of Al 2 O 3 fibers and the molecular-level interactions of ions with polymer, and their effect on the diffusivity of ions are established through solid-state NMR detecting 27 Al, 1 H, 13 C, 19 F nuclei including 2D 13 C{ 1 H} HETCOR NMR experiments. The 13 C DPMAS and CPMAS experiments highlight the dynamic heterogeneity associated with the ions that are embedded in the rigid and the mobile phase of GPEs. While some of the ionic species strongly interact with polymer chains in the rigid environment, the majority of them reside in the mobile phase and contribute to the overall increased conductivity. Most importantly, Al 2 O 3 nanofibers significantly affect the dynamics of ionic species that are present in the mobile phase between the polymer chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

n ‐Type Rigid Semiconducting Polymers Bearing Oligo(Ethylene Glycol) Side Chains for High‐Performance Organic Electrochemical Transistors

Abstract N‐type conjugated polymers as the semiconducting component of organic electrochemical transistors (OECTs) are still undeveloped with respect to their p‐type counterparts. Herein, we report two rigid n‐type conjugated polymers bearing oligo(ethylene glycol) (OEG) side chains, PgNaN and PgNgN, which demonstrated an essentially torsion‐free π‐conjugated backbone. The planarity and electron‐deficient rigid structures enable the resulting polymers to achieve high electron mobility in an OECT device of up to the 10 −3 cm 2 V −1 s −1 range, with a deep‐lying LUMO energy level lower than −4.0 eV. Prominently, the polymers exhibited a high device performance with a maximum dimensionally normalized transconductance of 0.212 S cm −1 and the product of charge‐carrier mobility μ and volumetric capacitance C* of 0.662±0.113 F cm −1 V −1 s −1 , which are among the highest in n‐type conjugated polymers reported to date. Moreover, the polymers are synthesized via a metal‐free aldol‐condensation polymerization, which is beneficial to their application in bioelectronics.

Chen, Xingxing↗
DOE OSTI2019

Helical side chain chemistry of a peptoid‐based SP‐C analogue: Balancing structural rigidity and biomimicry

Abstract Surfactant protein C (SP‐C) is an important constituent of lung surfactant (LS) and, along with SP‐B, is included in exogenous surfactant replacement therapies for treating respiratory distress syndrome (RDS). SP‐C's biophysical activity depends upon the presence of a rigid C‐terminal helix, of which the secondary structure is more crucial to functionality than precise side‐chain chemistry. SP‐C is highly sequence‐conserved, suggesting that the β‐branched, aliphatic side chains of the helix are also important. Nonnatural mimics of SP‐C were created using a poly‐ N ‐substituted glycine, or “peptoid,” backbone. The mimics included varying amounts of α‐chiral, aliphatic side chains and α‐chiral, aromatic side chains in the helical region, imparting either biomimicry or structural rigidity. Biophysical studies confirmed that the peptoids mimicked SP‐C's secondary structure and replicated many of its surface‐active characteristics. Surface activity was optimized by incorporating both structurally rigid and biomimetic side chain chemistries in the helical region indicating that both characteristics are important for activity. By balancing these features in one mimic, a novel analogue was created that emulates SP‐C's in vitro surface activity while overcoming many of the challenges related to natural SP‐C. Peptoid‐based analogues hold great potential for use in a synthetic, biomimetic LS formulation for treating RDS.

Brown, Nathan J.↗
DOE OSTI2020

First observation of excited states in the 154 Ce 96 nucleus: Rigid rotation at Z = 58

We report new analysis of the data from measurements of γ radiation following spontaneous fission of 248 Cm and 252 Cf, performed using Eurogam2 and Gammashpere arrays, respectively, has revealed, for the first time, excited states in the neutron-rich nucleus, 154 Ce 96 . Using these fission data we have also improved uncertainties on γ-ray energies in the ground-state bands of several neutron-rich nuclei of the A≈150 mass region. The improved data provided precise systematics of the E exc (4+)/E exc (2+) ratio in the region, which indicates that in the Ce isotopic chain the rigid-rotation limit is reached at the neutron number N=96, two neutrons “later” than in the chain of Nd isotopes. The new results suggest the involvement of the proton 9/2 + [404] extruder orbital in generating nuclear deformation in the A≈150 region, analogous to the known role played by the neutron 11/2 – [505] extruder in this region. The catalytic-type action of both extruders is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Multiscale Modeling of Vinyl-Addition Polynorbornenes: The Effect of Stereochemistry

Vinyl-addition polynorbornenes are candidates for designing high-performance polymers due to unique characteristics, which include a high glass transition temperature associated with a rigid backbone. Recent studies have established that the processability and properties of these polymers can be fine-tuned by using targeted substitutions. However, synthesis with different catalysts results in materials with distinct properties, potentially due to the presence of various stereoisomers that are difficult to quantify experimentally. Herein, we develop all-atom models of polynorbornene oligomers based on classical force fields and density functional theory. To establish the relationship between chemical architecture, chain conformations, and melt structure, we perform detailed molecular dynamics simulations with the fine-tuned atomistic force field and propose simpler coarse-grained descriptions to address the high molecular weight limit. All-atom simulations of oligomers suggest high glass transition temperatures in the range of 550–600 K. In the melt state (800 K), meso chains form highly rigid extended coils (C∞≈11) with amorphous structural characteristics similar to the X-ray diffraction data observed in the literature. In contrast, simulations with racemo chains predict highly helical tubular chain conformations that could promote assembly into crystalline structures.

Polymer Science↗
DOE OSTI2018

Anomalous interlayer vibrations in strongly coupled layered PdSe 2

In this work, we show unusual effects of strong interlayer coupling on low-frequency (LF) Raman scattering in exfoliated PdSe 2 crystals with different number of layers. Unlike many other layered materials, it is found that the measured frequencies of the breathing modes cannot be simply described by a conventional linear chain model (LCM) that treats each layer as a single rigid object. By using first-principles calculations, we show that strong deviations from layer rigidity can occur for the LF breathing vibrations of PdSe 2 , which accounts for the observed disagreement with the conventional LCM. The layer non-rigidity and strong interlayer coupling could also explain the unusual strong intensities of the LF breathing modes that are comparable with those of the high-frequency Raman modes. These strong intensities allowed us to use a set of the measured LF Raman lines as unique fingerprints for a precise assignment of the layer numbers. The assignment of the layer numbers was further confirmed using second harmonic generation that appeared only in the noncentrosymmetric even-layer PdSe 2 crystals. In conclusion, this work thus demonstrates a simple and fast approach for the determination of the number of layers in 2D materials with strong interlayer coupling and non-rigid interlayer vibrations.

2D materials↗
DOE OSTI2014

Conformation-independent structural comparison of macromolecules with ProSMART

The Procrustes Structural Matching Alignment and Restraints Tool (ProSMART) has been developed to allow local comparative structural analyses independent of the global conformations and sequence homology of the compared macromolecules. This allows quick and intuitive visualization of the conservation of backbone and side-chain conformations, providing complementary information to existing methods. The identification and exploration of (dis)similarities between macromolecular structures can help to gain biological insight, for instance when visualizing or quantifying the response of a protein to ligand binding. Obtaining a residue alignment between compared structures is often a prerequisite for such comparative analysis. If the conformational change of the protein is dramatic, conventional alignment methods may struggle to provide an intuitive solution for straightforward analysis. To make such analyses more accessible, the Procrustes Structural Matching Alignment and Restraints Tool (ProSMART) has been developed, which achieves a conformation-independent structural alignment, as well as providing such additional functionalities as the generation of restraints for use in the refinement of macromolecular models. Sensible comparison of protein (or DNA/RNA) structures in the presence of conformational changes is achieved by enforcing neither chain nor domain rigidity. The visualization of results is facilitated by popular molecular-graphics software such as CCP4mg and PyMOL, providing intuitive feedback regarding structural conservation and subtle dissimilarities between close homologues that can otherwise be hard to identify. Automatically generated colour schemes corresponding to various residue-based scores are provided, which allow the assessment of the conservation of backbone and side-chain conformations relative to the local coordinate frame. Structural comparison tools such as ProSMART can help to break the complexity that accompanies the constantly growing pool of structural data into a more readily accessible form, potentially offering biological insight or influencing subsequent experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Slow Magnetic Relaxation of Co( II ) Single Chains Embedded within Metal–Organic Superstructures

We report two coordination polymers of the type Co(BPDC)(N-ox), with BPDC being 4,4'-biphenyldicarboxylate and N-ox being pyridine N-oxide (PNO) or isoquinoline N-oxide (IQNO), have been synthesized and characterized. The compounds feature 2D and 3D metal–organic networks that encapsulate Co(II)-based chains in a rigid superstructure. The dc and ac magnetic properties of these Co(BPDC)(N-ox) materials have been investigated alongside those of a related Co(BDC)(PNO) compound (where BDC is 1,4-benzenedicarboxylate), which contains a smaller dicarboxylate linker. These Co(II)-containing coordination polymers exhibit slow magnetic relaxation, as observed by ac susceptibility measurements. The observed magnetic behavior of all compounds is consistent with an antiferromagnetic interaction between canted Co spins along the 1D skeleton, resulting in single-chain magnet behavior. In the case of Co(BPDC)(IQNO), weak interchain magnetic interactions yield 3D antiferromagnetic order while the inherent magnetic behavior stemming from the chain component is maintained. The combination of these effects in this material puts it at the frontier between single-chain magnets and classical bulk antiferromagnets. This work contributes to the limited group of materials featuring the organization of single-chain magnets within a coordination polymer superstructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2005

Momentum-Based Dynamics for Spacecraft with Chained Revolute Appendages

An efficient formulation is presented for a sub-class of multi-body dynamics problems that involve a six degree-of-freedom base body and a chain of N rigid linkages connected in series by single degree-of-freedom revolute joints. This general method is particularly well suited for simulations of spacecraft dynamics and control that include the modeling of an orbiting platform with or without internal degrees of freedom such as reaction wheels, dampers, and/or booms. In the present work, particular emphasis is placed on dynamic simulation of multi-linkage robotic manipulators. The differential equations of motion are explicitly given in terms of linear and angular momentum states, which can be evaluated recursively along a serial chain of linkages for an efficient real-time solution on par with the best of the O(N3) methods.

Queen, Steven↗
DOE OSTI2019

Polymers with Side Chain Porosity for Ultrapermeable and Plasticization Resistant Materials for Gas Separations

Polymer membranes with ultrahigh CO 2 permeabilities and high selectivities are needed to address some of the critical separation challenges related to energy and the environment, especially in natural gas purification and postcombustion carbon capture. However, very few solution-processable, linear polymers are known today that access these types of characteristics, and all of the known structures achieve their separation performance through the design of rigid backbone chemistries that concomitantly increase chain stiffness and interchain spacing, thereby resulting in ultramicroporosity in solid-state chain-entangled films. Herein, the separation performance of a porous polymer obtained via ring-opening metathesis polymerization is reported, which possesses a flexible backbone with rigid, fluorinated side chains. This polymer exhibits ultrahigh CO 2 permeability (>21 000 Barrer) and exceptional plasticization resistance (CO 2 plasticization pressure > 51 bar). Compared to traditional polymers of intrinsic microporosity, the rate of physical aging is slower, especially for gases with small effective diameters (i.e., He, H 2 , and O 2 ). Overall, this structural design strategy, coupled with studies on fluorination, demonstrates a generalizable approach to create new polymers with flexible backbones and pore-forming side chains that have unexplored promise for small-molecule separations.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effect of Nonconjugated Spacers on Mechanical Properties of Semiconducting Polymers for Stretchable Transistors

Abstract Nonconjugated segments in polymer semiconductors have been utilized to improve the processability of semiconducting polymers. Recently, several reports have described the improvement of stretchability of polymer semiconductors by incorporating nonconjugated spacers. However, the effect of relative flexibility of such conjugation breakers on mechanical and electrical properties has not yet been studied systematically. Here, conjugation breakers with different chain length and rigidity are incorporated into the backbone of diketopyrrolopyrrole‐based semiconductors. Interestingly, it is observed that the longer and more flexible conjugation breakers result in greater ductility and lower elastic modulus without significantly affecting mobility. The enhancement of stretchability is attributed to the reduced modulus and the decrease in crystallinity, as confirmed by X‐ray diffraction. With this newly established molecular design, transistors are prepared with a semiconducting polymer containing dodecyl segments as conjugation breakers. It is observed that this polymer retains a mobility of >0.36 cm 2 V −1 s −1 at 100% strain, and after 100 cycles at 50% strain. Finally, its high stability against strain is also observed with a fully stretchable transistor fabricated. Taken together, the above results indicate that molecular engineering of conjugated polymers, i.e., by incorporating suitable conjugation breakers, can effectively tune mechanical properties without significantly compromising their electrical properties.

Mun, Jaewan↗
DOE OSTI2020

Mechanically robust and superior conductive n-type polymer binders for high-performance micro-silicon anodes in lithium-ion batteries

Compared with nanostructured silicon (Si), the Si microparticle (SiMP) has more commercial prospects due to its low cost. However, SiMPs suffer from unavoidable fracture during electrochemical cycling owing to their significant volume change. Here we develop a series of novel n-type conductive polymer binders (CPBs) for SiMP anodes in lithium-ion batteries owing to their superior properties. Extraordinary electrochemical performance of cells with such unique binders could be achieved, which is because these designed polymers contain electron-withdrawing oxadiazole ring groups and easily ionizable sulfonate polar groups, exhibiting excellent ionic conductivity, outstanding wettability to the electrolyte, and improved electronic conductivity after doping. Moreover, the coexistence of rigid and flexible chains enables them to have exceptional strength and ductility. Besides, a unique electrochromic approach has been utilized to investigate the energy gap of the CPBs in n-doping states. The ionic and electronic conductivities of prepared CPBs in an eigenstate and n-doping state have been systematically studied by the electrochemical method, filling the current research gap in this field. Due to the high conductivity of b-POD, the capacity of SiMPs (4200 mA h g –1 ) can be almost entirely released during the first cycle of discharge, while the SiMP anodes prepared with the PAALi or CMC binder show a much lower initial capacity. Here, the high conductivity of b-POD also endows it with better cycling performance than non-conductive binders especially at high current densities, demonstrating its excellent fast-charging ability. More essentially, this work provides polymer binders without any intricate structural designs to obtain high-performance SiMP batteries, significantly enhancing their practical applications.

25 ENERGY STORAGE↗
DOE OSTI2016

Why many polymers are so fragile: A new perspective

Many polymers exhibit much steeper temperature dependence of their structural relaxation time (higher fragility) than liquids of small molecules, and the mechanism of this unusually high fragility in polymers remains a puzzle. To reveal additional hints for understanding the underlying mechanism, we analyzed correlation of many properties of polymers to their fragility on example of model polymer polystyrene with various molecular weights (MWs). Here, we demonstrate that these correlations work for short chains (oligomers), but fail progressively with increase in MW. Our surprising discovery is that the steepness of the temperature dependence (fragility) of the viscosity that is determined by chain relaxation follows the correlations at all molecular weights. These results suggest that the molecular level relaxation still follows the behavior usual for small molecules even in polymers, and its fragility (chain fragility) falls in the range usual for molecular liquids. It is the segmental relaxation that has this unusually high fragility. We also speculate that many polymers cannot reach an ergodic state on the time scale of segmental dynamics due to chain connectivity and rigidity. This leads to sharper decrease in accessible configurational entropy upon cooling and results in steeper temperature dependence of segmental relaxation. Our proposed scenario provides a new important insight into the specifics of polymer dynamics: the role of ergodicity time and length scale. At the end, we suggest that a similar scenario can be applicable also to other molecular systems with slow intra-molecular degrees of freedom and to chemically complex systems where the time scale of chemical fluctuations can be longer than the time scale of structural relaxation.

36 MATERIALS SCIENCE↗