Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cadmium selenide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Resilience of High-Efficiency CdSeTe:As and CdSeTe:Cu Solar Cells to Proton Irradiation

Power generation in space is currently dominated by expensive III-V multi-junction photovoltaic (PV) devices and cheap crystalline silicon (c-Si) PV devices. Both of these technologies degrade rapidly in proton-radiation-rich space environments, such as the Van Allen belt. The present study of cadmium selenide telluride- (CdSeTe-) based PV devices exposed to 150-to-1500 keV proton irradiation with fluences up to 9 x 1013 cm-2 reveal a more radiation-hard alternative to III-V and c-Si PV technologies. We report on measurement and analysis of current density vs voltage (JV), external quantum efficiency (EQE), external radiative efficiency, and capacitance vs voltage (CV) characteristics. JV characteristics of As-doped CdSeTe devices show 80% remaining power conversion efficiency (PCE) relative to unexposed controls when exposed to 650 keV protons at a fluence of 1012 cm-2. Under these same irradiation conditions, Cu-doped CdSeTe devices demonstrate an even better 95% PCE retention compared with unirradiated control devices. Evidence of radiation-induced absorber p-type doping compensation is observed in the glass-side EQE at 0 V and CV characteristics of most of the irradiated CdSeTe:As devices, but clear compensation is evident only for the most heavily irradiated CdSeTe:Cu devices. Elevated blue-green photocurrent in the film-side 0 V EQE suggests a buried junction in the most heavily irradiated CdSeTe:As devices. Although CdSeTe:Cu devices are the more resilient of the CdSeTe structures, both CdSeTe-based technologies are radiation-hard when compared to c-Si and III-V multi-junction PV.

14 SOLAR ENERGY↗
DOE OSTI2023

A composite electrodynamic mechanism to reconcile spatiotemporally resolved exciton transport in quantum dot superlattices

Quantum dot (QD) solids are promising optoelectronic materials; further advancing their device functionality requires understanding their energy transport mechanisms. The commonly invoked near-field Förster resonance energy transfer (FRET) theory often underestimates the exciton hopping rate in QD solids, yet no consensus exists on the underlying cause. In response, we use time-resolved ultrafast stimulated emission depletion (STED) microscopy, an ultrafast transformation of STED to spatiotemporally resolve exciton diffusion in tellurium-doped cadmium selenide–core/cadmium sulfide–shell QD superlattices. We measure the concomitant time-resolved exciton energy decay due to excitons sampling a heterogeneous energetic landscape within the superlattice. The heterogeneity is quantified by single-particle emission spectroscopy. This powerful multimodal set of observables provides sufficient constraints on a kinetic Monte Carlo simulation of exciton transport to elucidate a composite transport mechanism that includes both near-field FRET and previously neglected far-field emission/reabsorption contributions. Uncovering this mechanism offers a much-needed unified framework in which to characterize transport in QD solids and additional principles for device design.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quantum Dot Based Solid-State Radiation Detectors

The detection and accurate identification of nuclear material is critical to the advancement of national security, medical technology, and environmental prosperity. The gold standard solid-state detector HPGe, suffers from high manufacturing costs and the need to operate at cryogenic temperatures to ensure reliable energy resolution. The other most common solid-state detector, cadmium zinc telluride (CZT), has the ability to operate at room temperature, but the grow process results in impurities decreasing performance. In this paper we have developed a continuous flow synthesis able to mass produce targeted size cadmium selenide quantum dots. The implementation of these QDs in QD/MEH-PPV composites has the ability to rival HPGe energy resolution at room temperature.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1965

Photoelectric sensor output controlled by eyeball movements

The difference between the infrared absorption of the iris and infrared reflectivity of the eyeball controls the operation of a device consisting of an infrared source and amplifier, a cadmium selenide infrared sensor, and an infrared filter.

Source record↗
NASA NTRS1979

A procedure for determining the optical characteristics of a device for measuring illumination in the atmosphere of Venus

A procedure is described for obtaining the calibration, angular and spectral characteristics of a broad band photometer used on Venera 9 and 10 spacecraft to measure the illuminance regime in five spectral intervals with respect to three directions. The photometer has three identical groups of photoreceivers on which light falls through fiber light guides. Each group contains three cadmium sulfide photoresistors with light filters, a cadmium selenide photoresistor and a silicon photodiode. The temperature of the photoreceivers is measured by thermistors installed in series with the receivers.

Golovin, Y. M.↗
DOE OSTI2023

A comprehensive material study of CdSeTe films deposited with differing selenium compositions

The addition of selenium into CdTe to create the ternary alloy CdSeTe has been one of the most impactful advancements to CdTe-based photovoltaics in the last decade. CdSeTe/CdTe bilayer device structures have enabled a gain in short-circuit current due to the narrower bandgap of the alloy, with minimal to no loss in voltage. Intensity of photoluminescence and time-resolved photoluminescence measurements suggest this is due to an increase in carrier lifetime and concomitant greater fraction of radiative vs non-radiative recombination events which allows for a reduction in the voltage deficit. Here, in this work, we study the properties of as-deposited and CdCl 2 -treated CdSeTe films deposited by close-space sublimation under varying conditions from CdSeTe source charges with both 20 and 40 mol% CdSe. We find that the selenium content in the deposited films are substantially reduced from that of the source material. Additionally, deposition temperature, particularly that of the substrate, considerably affects the grain size, crystallinity, and photoluminescence of the material, illustrating the importance of source material selection and process optimization. Finally, we present evidence that the source material, and therefore the properties of the deposited films, change over time as the source material is used.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mechanistic Insights into Copper(I) and Copper(II) Cation Exchange Reactions in CdSe Nanoplatelets

In this study, we investigated the synthesis of copper selenide nanoplatelets (NPLs) through a cation exchange reaction (CER) in 5-monolayer-thick CdSe NPLs using Cu(I) and Cu(II) precursors. We discovered that the exposure of CdSe NPLs to a Cu(I) precursor led to the transformation of NPLs into Cu 2-x Se while maintaining their nanoplatelet morphology. The replacement of Cd(II) with Cu(I) prevailed over the formation of doped structures. In the case of the Cu(II) precursor, we observed that Cu(II) was first reduced to Cu(I) before being intercalated into the host lattice, resulting in the synthesis of Cu 2-x Se, similar to CER with Cu(I) precursors but without preservation of the initial morphology of NPLs. Interestingly, the presence of oxygen was found to facilitate the cation exchange processes in CdSe NPLs, whereas a nitrogen atmosphere suppressed the CER. Further, despite the similar ionic sizes of Cu(I) and Cu(II), the substitution of Cd(II) with Cu(II) was found to be challenging, possibly due to the involvement of redox processes resulting in the significant deterioration of initial CdSe NPLs. We demonstrate that CER can achieve near-complete substitution of cadmium atoms with monovalent copper at room temperature. Understanding the processes involved in CERs is crucial for engineering more complex structures, such as high-entropy nanoparticles involving cation exchange with different oxidation states and development of material synthesis using machine learning and artificial intelligence approaches.

2D nanoplatelets↗
DOE OSTI2024

Synthesis of Thick Hg x Cd 1– x Se Nanoplatelets by Cation Exchange Catalyzed by Silver Ions, Showing Amplified Spontaneous Emission

II-VI semiconductor nanoplatelets have emerged as promising candidates for various applications, owing to their tunable optical properties dictated by their thickness and compositions. In the realm of infrared technology, mercury chalcogenides stand out as particularly promising materials for optoelectronic applications. However, the direct synthesis of 2D particles in this category remains challenging, thus prompting the exploration of alternative methods such as cation exchange. Here, we demonstrate that the cation exchange process from cadmium to mercury can be effectively catalyzed by monovalent Ag + cations. Further, this catalysis facilitates the formation of alloyed Hg x Cd 1-x Se nanoplatelets with tunable optical properties, with the photoluminescence peak ranging from 1.23 eV for the thinnest three-monolayer (ML) nanoplatelets to 0.92 eV for the thickest 7 ML nanoplatelets. The Ag + ions reduce the activation energy of the cation exchange process by a factor of 2, enabling enhanced penetration of mercury atoms deep into the native CdSe nanoplatelets. Moreover, these nanoplatelets exhibit optical gain in the infrared spectrum, including the 1.3 μm telecommunication band, with a fluence threshold at 80 K of 50 μJ∙cm -2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Anthracene Diphosphate Ligands for CdSe Quantum Dots; Molecular Design for Efficient Upconversion

Quantum dot (QD)-sensitized photon upconversion follows a multi-step energy transfer process from the QD to transmitter ligand to a soluble annihilator. Using a novel 10-R-anthracene-1,8-diphosphoric acid (R = octyl, 2- hexyldecyl, phenyl) ligand with high binding affinity for CdSe QD surfaces, we demonstrate a photon upconversion process that is limited by the transmitter to annihilator transfer efficiency. Using 1 H NMR spectroscopy, we demonstrate that these bidentate diphosphate ligands rapidly and irreversibly displace two carboxylate ligands. These ligands mediate energy transfer from the photoexcited QDs to a triplet annihilator (1,10-diphenylanthracene), producing overall photon upconversion quantum efficiencies as high as 17%, the highest for QDs with no shells. In conclusion, transient absorption spectroscopy shows that the anthracene dihydrogen phosphate (ADP) ligand supports a 3.4 fold longer triplet state lifetime compared to 9-anthracene carboxylic acid (299.9 ± 9.5 vs 88.2 ± 2.1 μs), increasing the probability of energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Colloidal Semiconductor Nanocrystal Lasers and Laser Diodes

Lasers and optical amplifiers based on solution-processable materials have been long-desired devices for their compatibility with virtually any substrate, scalability, and ease of integration with on-chip photonics and electronics. These devices have been pursued across a wide range of materials including polymers, small molecules, perovskites, and chemically prepared colloidal semiconductor nanocrystals, also commonly referred to as colloidal quantum dots. The latter materials are especially attractive for implementing optical-gain media as in addition to being compatible with inexpensive and easily scalable chemical techniques, they offer multiple advantages derived from a zero-dimensional character of their electronic states. These include a size-tunable emission wavelength, low optical gain thresholds, and weak sensitivity of lasing characteristics to variations in temperature. Here we review the status of colloidal nanocrystal lasing devices, most recent advances in this field, outstanding challenges, and the ongoing progress toward technological viable devices including colloidal quantum dot laser diodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

No One Size Fits All: Semiconductor Nanocrystal Sizing Curves

Although colloidal quantum dots or nanocrystals (NCs) are now long past their infancy, there remain basic issues that must be addressed to fully establish their fundamental, size-dependent properties. This is especially true for model systems such as CdSe where confinement effects are responsible for changes in their optical response and where significant effort has been invested in developing theories of their underlying electronic structure. Surprisingly, there still appears to be a lack of consensus on one of the most fundamental metrics for NCs, their sizing curves. As shown here, these are empirical functions that link the size of isotropically shaped semiconductor NCs (such as the diameter, d, for spherical NCs and edge length, l, for cube-shaped ones) to corresponding changes in optical response.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Revealing the Influence of Binding Motifs on Electron Transfer and Recombination Kinetics for CdSe Quantum Dots Functionalized with a Modified Viologen

Anchoring of molecules to the surfaces of semiconductor nanocrystals (NCs) presents an opportunity to leverage the precise synthetic tunability of molecular function and the remarkable light harvesting properties of NCs to drive photochemical reactions. However, charge transfer between the two species depends not only on the energy level alignments but also on the details of their binding interactions, which are difficult to probe. Here, in this work, we characterize the binding between CdSe quantum dots (QDs) and a new phosphonated derivative of the electron acceptor methyl viologen, designed to attach to the QD surface via the phosphonate group. We use isothermal titration calorimetry to probe the thermodynamics of the QD–molecule interaction and use the parameters determined therein to analyze transient absorption spectroscopy measurements of forward and back electron transfer from QDs to the viologen. We find that the ligand-like phosphonate binding leads to an electron-transfer rate constant that is 3 orders of magnitude smaller than that for the face-on binding of the bipyridine ring of methyl viologen. Back electron transfer is also significantly slower in the derivative. Interestingly, a minor fraction of the phosphonated derivative also binds in the face-on configuration, with similar forward and back electron transfer kinetics as methyl viologen. Numerical simulations show that the ligand-like binding will lead to significantly improved quantum yields of photocatalysis over a wide range of reaction rates. By independently characterizing binding thermodynamics and charge transfer kinetics, this work reveals how the complexities underlying electron transfer at the NC–molecule interface determine photocatalytic outcomes. This work also represents a step toward controlling forward and back electron transfer kinetics via rational molecular design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Photoinduced Charge Transfer and Vibronic Coherence in CdSe Quantum Dots with Methyl Viologen Acceptors

We show herein that photoinduced charge transfer from CdSe quantum dots (QDs) to surface-bound methyl viologen (MV 2+ ) acceptors is mediated by a vibronically coherent, nonadiabatic mechanism. Broadband multidimensional electronic spectra and an analysis of coherences show that a mixed QD–MV charge-transfer (CT) state is populated on the <50 fs time scale after optical preparation of the X3 (1P 3/2 –1P e ) state, well prior to the appearance of the one-electron photoreduced ground state (MV +• ). A partial redistribution of charge from the core of the QD to the acceptor is revealed by excited-state coherences of an out-of-plane vibrational mode local to MV 2+ and of a low-frequency mode mixing a MV 2+ mode with the longitudinal optical (LO) phonon of the QD core. The ultrafast damping of these coherences indicates that excited-state wavepackets travel from the optically prepared, Franck–Condon structure through a conical intersection to reach the CT state. These results suggest that vibronically coherent processes generating CT intermediates can be exploited to improve the efficiency of QD-based solar cells and photocatalysts.

Cadmium selenide↗
DOE OSTI2021

Vibronic Excitons and Conical Intersections in Semiconductor Quantum Dots

Surface defects and organic surface-capping ligands affect the photoluminescence properties of semiconductor quantum dots (QDs) by altering the rates of competing nonradiative relaxation processes. In this study, broadband two-dimensional electronic spectroscopy reveals that absorption of light by QDs prepares vibronic excitons, excited states derived from quantum coherent mixing of the core electronic and ligand vibrational states. Rapidly damped coherent wavepacket motions of the ligands are observed during hot-carrier cooling, with vibronic coherence transferred to the photoluminescent state. Furthermore, these findings suggest a many-electron, molecular theory for the electronic structure of QDs, which is supported by calculations of the structures of conical intersections between the exciton potential surfaces of a small ammonia-passivated model CdSe nanoparticle.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantifying the Ligand-Induced Triplet Energy Transfer Barrier in a Quantum Dot-Based Upconversion System

During photon upconversion, quantum dots (QDs) transfer energy to molecules in solution through a long ligand shell. This insulating ligand shell imparts colloidal stability at the expense of efficient photosensitization. For the first time, we quantify the barrier these aliphatic ligands pose for triplet energy transfer in solution. Using transient absorption spectroscopy, we experimentally measure a small damping coefficient of 0.027 Å −1 for a ligand exceeding 10 carbons in length. The dynamic nature of ligands in solution lowers the barrier to charge or energy transfer compared to organic thin films. In addition, we show that surface ligands shorter than 8 carbons in length allow direct energy transfer from the QD, bypassing the need for a transmitter ligand to mediate energy transfer, leading to a 6.9% upconversion quantum yield compared with 0.01% for ligands with 18 carbons. Furthermore, this experimentally derived insight will enable the design of efficient QD-based photosensitizers for catalysis and energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗