Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CaI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Studies of Reactive Amorphous Compounds and Surfaces: Their Pathways to Crystallinity and Surface Functionality

This project was originally headed by Dr. Abraham Clearfield (Texas A&M University, ret.) and focused on developing structural models of zirconium phosphate (ZrP) based materials at different stages of crystalline order using PDF techniques developed by co-PI Dr. Simon Billinge (Columbia University). When Dr. Clearfield retired, the project was taken over by Dr. Hong-Cai Zhou (Texas A&M University). The project proposed looking at defective metal-organic frameworks (MOFs) supported on the surface of the ZrP materials. During the project, the personnel conducted studies of the dispersion of different phosphate ligands in mixed organic phosphonates, and how they could be utilized to incorporate different metals within the ZrP interlayer spacing.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Closure Report for Corrective Action Unit 572: Test Cell C Ancillary Building and Structures, Nevada National Security Site, Nevada, Revision 0

The purpose of this CR is to provide documentation supporting the completed corrective actions and data confirming that the closure objectives for CAU 572 were met. To achieve this, the following actions were performed: • Corrective action investigation (CAI) activities were performed from August 2020 through May 2023, as set forth in the SAFER Plan for CAU 572; and in accordance with the Soils Activity Quality Assurance Plan, which establishes requirements, technical planning, and general quality practices. • Corrective actions were completed during decontamination and demolition (D&D) and disposal activities, and were performed from August 2022 through September 2025.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

SPRUCE Sphagnum Phytobiome Responses to Whole Ecosystem Warming and Elevated Atmospheric CO2 in July, 2017-2021

This dataset reports the carbon (C) and nitrogen (N) isotopic composition of Sphagnum moss tissue collected from the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experimental site within the Marcell Experimental Forest in northern Minnesota, USA. Tissues were collected inside the SPRUCE experimental study plot, where air and peat warming are combined in whole-ecosystem warming treatments, from 2019-2021. Additionally, rates of nitrogen fixation and methane oxidation measured for Sphagnum from 2017, 2019, and 2021. Sphagnum tissue % water content was measured at all timepoints. This dataset was used to conduct analyses within Petro et al (2023). Sphagnum C and N concentrations and 13C and 15N isotopic natural abundance were determined for three replicate Sphagnum tissue samples collected from inside the SPRUCE enclosures in July 2019-2021. Elemental and isotope analyses were conducted at the University of Georgia – Center for Applied Isotope Studies (CAIS; https://cais.uga.edu/). Plant elemental analysis was performed by the micro-Dumas method, while isotopic natural abundance was measured by isotope ratio mass spectrometry. 13C natural abundance is expressed as the per mille (‰) deviation from the Pee Dee Belemnite standard (PDB) 13C:12C ratio (δ13C), while 15N natural abundance is expressed as the ‰ deviation from the N2 atmospheric 15N:14N ratio (δ15N). Rates of nitrogen fixation and methane oxidation were measured using serum bottle incubations performed with Sphagnum collected inside the SPRUCE enclosures in July 2017, 2019, and 2021. Rates were calculated according to the amount of 15N-N2 or 13C-CH4 (methane) incorporated into the Sphagnum tissue or incubation headspace over the 48-hour intion period. In 2017, incubations were performed in growth chambers set to the temperature of the experimental plots during Sphagnum sampling. In 2019 and 2021, the incubations were performed directly inside the experimental plots. The 13C and 15N isotopic natural abundance data and rate measurements presented in this dataset provide insight into the impacts of whole-ecosystem warming and elevated atmospheric carbon dioxide (CO2) on N and C cycling within the Sphagnum phytobiome. This dataset contains two data files in comma-separate values (*.csv) format. Additional metadata are provided: two data dictionaries and a file-level metadata file in comma-separate values (.csv) format and a user guide in PDF (*.pdf) format. Additional datasets on NH4-N availability, porewater concentrations of CH4 and CO2, and Sphagnum groundcover within the SPRUCE experimental plots are available. These are outlined in the Related Datasets section in the user guide.

delta 13 carbon↗
DOE OSTI2021

Constraints on Chondrule Generation, Disk Dynamics, and Asteroid Accretion from the Compositions of Carbonaceous Meteorites

The elemental and isotopic compositions of meteorites are expected to reflect several key processes that occurred in the early solar system, including the migration of gas and dust throughout the protoplanetary disk, the formation of chondrules, and the accretion of the first planetary bodies. However, the specific origins of the various compositions measured among these rocks are currently poorly constrained, limiting our understanding of these processes. Here, we use previously measured elemental and isotopic compositions of chondrites and iron meteorites to identify that carbonaceous (CC) meteorites are mixtures of noncarbonaceous (NC) material, calcium–aluminum-rich inclusion (CAI) material, and CI (Ivuna-like) material, in varying proportions. These trends indicate that chondrules in CO (Ornans-like), CM (Mighei-like), CV (Vigarano-like), and TL (Tagish Lake) chondrites share near-identical average proportions of CI material, arguing that they were generated through the remelting of preexisting NC chondrules all in the same disk environment. Because this proportion likely evolved over space and time throughout the disk, this similarity argues that these chondrules originate from a restricted spatial region and time interval, favoring their generation through a localized event. Moreover, the compositions of CR (Renazzo-like) chondrites indicate that their constituents formed through mechanisms different from those in CO, CM, CV, and TL chondrites. Furthermore, the recovered proportions of CI material in CC iron meteorites and chondrites together also argue for evolution in either the predominant direction of dust and gas motion in the first ~10 au of the disk or the radial distance of planetesimal accretion throughout the CC reservoir.

58 GEOSCIENCES↗
DOE OSTI2021

Experimental investigation of elemental and isotopic evaporation processes by laser heating in an aerodynamic levitation furnace

In this report we carried out evaporation experiments on a B-type calcium–aluminium-rich inclusion (CAI) melt in a gas-mixing aerodynamic levitation laser furnace, at 1873 K and an oxygen partial pressure of 10 -9.1 atm, for durations ranging from 60 to 600 s. Evaporation of SiO 2 and MgO follow the same trend as those observed in vacuum furnace experiments at the same temperature and starting composition, showing that their evaporation relative to one another from the melt is independent of pressure, oxygen fugacity, and hydrodynamical regime specific to the furnace. Isotopic ratios of Mg and Si in evaporation residues are used to derive fractionation factors of α 26/24 Mg vap-liq = 0.9906± 0.0004 and α 30/28 Si vap-lip = 0.9943±0.0003, which are both significantly closer to unity than those found for evaporation in a vacuum, which translates to less isotope fractionation. The residues are also less isotopically fractionated than expected for cases in which transport of the gas species away from the melt is diffusion-controlled at 1-atm. By analysing the flow regimes in our furnace, we find that advection by the levitating gas is the primary mode of mass transport away from the melt surface, as opposed to diffusion-limited transport in a vacuum or 1-atm tube furnace. A modified Hertz–Knudsen–Langmuir formulation accounts for this process, and shows that isotopic fractionation of both Si and Mg reflect a saturation factor (ratio of the pressure of the evaporating species to vapour saturation pressure) equal to 0.75. This is in perfect accord with recent measurements of Cu isotopic fractionation using a similar furnace. The fact that three elements (Mg, Si, Cu) with varying equilibrium vapour pressures, activity coefficients in the liquid, and diffusion coefficients in the gas have the same scaling behaviour to saturation pressure is a strong indication that the mechanism controlling evaporation is driven by the hydrodynamical regime imposed in the furnace. Therefore, this class of experiments can be used to constrain processes in which advection dominates over diffusion, such as (but not limited to) planetary ejecta, tektites, giant impacts, nebular condensation in a turbulent flow, or nuclear fallout material. Finally, the possibility to reach high temperatures (in excess of 3500 K) in this furnace allows it to be used to evaluate the activity coefficients of melt components in extreme conditions relevant to molten planetary interiors (i.e., magma oceans), with a specific focus on refractory elements.

58 GEOSCIENCES↗
DOE OSTI2021

Conductive Metallophthalocyanine Framework Films with High Carrier Mobility as Efficient Chemiresistors

Abstract The poor electrical conductivity of two‐dimensional (2D) crystalline frameworks greatly limits their utilization in optoelectronics and sensor technology. Herein, we describe a conductive metallophthalocyanine‐based NiPc‐CoTAA framework with cobalt(II) tetraaza[14]annulene linkages. The high conjugation across the whole network combined with densely stacked metallophthalocyanine units endows this material with high electrical conductivity, which can be greatly enhanced by doping with iodine. The NiPc‐CoTAA framework was also fabricated as thin films with different thicknesses from 100 to 1000 nm by the steam‐assisted conversion method. These films enabled the detection of low‐concentration gases and exhibited remarkable sensitivity and stability. This study indicates the enormous potential of metallophthalocyanine‐based conductive frameworks in advanced stand‐off chemical sensors and provides a general strategy through tailor‐make molecular design to develop sensitive and stable chemical sensors for the detection of low‐concentration gases.

Yue, Yan↗
DOE OSTI2020

Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector

To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and 0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. In order to bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. Overall, this enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

A Medium-/Low-Voltage Joint State Estimator Through Linear Uncertainty Propagation

Traditionally, distribution system state estimations (DSSE) are challenged by the lack of measurements at both primary and secondary sides of the system. The widely available cable television (CATV) voltage sensors installed in low-voltage (LV) networks bring opportunities to achieve higher quality DSSE covering a broader area of the distribution network. This study proposes a medium-/low-voltage (MV/LV) joint distribution system state estimation approach using the untapped CATV measurements. It aims at addressing the need for system situational awareness at the grid edge while improving the estimation accuracy at both the primary and secondary sides compared to its disjointed counterpart. Linearized measurement functions and boundary condition uncertainty propagation rules are derived to ensure the computational efficiency and accuracy of the joint state estimator. Numerical experiments are conducted on an IEEE test feeder to demonstrate the efficacy of the proposed method and the value of CATV measurements.

joint state estimation↗
DOE OSTI2025

Amplitude analysis of ψ3686→γKS0KS0

Using (2712 ± 14) × 106ψ(3686) events collected with the BESIII detector, we perform the first amplitude analysis of the radiative decay ψ3686→γKS0KS0$$ \psi (3686)\to \gamma {K}_S^0{K}_S^0 $$ within the mass region MKS0KS0<2.8$$ {M}_{K_S^0{K}_S^0}<2.8 $$ GeV/c2. Employing a one-channel K-matrix approach for the description of the dynamics of the KS0KS0$$ {K}_S^0{K}_S^0 $$ system, the data sample is well described with four poles for the f0-wave and three poles for the f2-wave. The determined pole positions are consistent with those of well-established resonance states. The observed f0 and f2 states are found to be in agreement with those produced in radiative J/ψ decays. The production behaviors of f0 and f2 poles in ψ3686→γKS0KS0$$ \psi (3686)\to \gamma {K}_S^0{K}_S^0 $$ are qualified with their residues and the converted branching fractions. By comparing with J/ψ→γKS0KS0$$ J/\psi \to \gamma {K}_S^0{K}_S^0 $$ decay, the ratios Bψ3686→γf0,2BJ/ψ→γf0,2$$ \frac{\mathcal{B}\left(\psi (3686)\to \gamma {f}_{0,2}\right)}{\mathcal{B}\left(J/\psi \to \gamma {f}_{0,2}\right)} $$ are determined, which provides crucial experimental inputs on the internal structure of the f0,2 states, especially their potential mixing with glueball components.

Ablikim, M↗
DOE OSTI2026

Search for the isospin-violating decays 𝜒 𝑐⁢𝐽 → $Λ\bar{⁢Σ}^0$ + c.c. and 𝜂 𝑐 → $Λ\bar{⁢Σ}^0$ + c.c.

Using a sample of (2712.4 ± 14.3) × 10 6 𝜓⁡(3686) events collected with the BESIII detector, we perform a search for the isospin-violating decays 𝜒 𝑐⁢𝐽 → $Λ\bar{⁢Σ}^0$ + c.c.(𝐽 = 0,1,2) and 𝜂 𝑐 → $Λ\bar{⁢Σ}^0$ + c.c. No significant signal for 𝜒 𝑐⁢𝐽 or 𝜂 𝑐 is observed in the $Λ\bar{⁢Σ}^0$ invariant mass distribution. The upper limits on the branching fractions at the 90% confidence level are set to be ℬ⁡(𝜒 𝑐⁢0 → $Λ\bar{⁢Σ}^0$ + c.c.) < 1.5 × 10 −6 , ℬ⁡(𝜒 𝑐⁢1 → $Λ\bar{⁢Σ}^0$ + c.c.) < 1.6 × 10 −6 , ℬ⁡(𝜒 𝑐⁢2 → $Λ\bar{⁢Σ}^0$ + c.c.) < 1.7 × 10 −6 , and ℬ⁡(𝜂 𝑐 → $Λ\bar{⁢Σ}^0$ + c.c.) < 6.2 × 10 −5 for the first time.

Ablikim, M. [Institute of High Energy Physics] (OR↗
DOE OSTI2025

Measurement of the branching fractions of D + → K + K − π + π + π − , ϕ π + π + π − , K S 0 K + π + π − π 0 , K S 0 K + η , and K S 0 K + ω decays

Using 20.3 fb − 1 of e + e − collision data collected at a center-of-mass energy of 3.773 GeV with the BESIII detector operating at the BEPCII collider, the branching fractions of three hadronic charm meson decays, D + → ϕ π + π + π − , D + → K S 0 K + π + π − π 0 , and D + → K S 0 K + ω , are measured for the first time to be ( 0.54 ± 0.19 ± 0.02 ) × 10 − 4 , ( 2.51 ± 0.34 ± 0.14 ) × 10 − 4 , and ( 2.02 ± 0.35 ± 0.10 ) × 10 − 4 , respectively. Futhermore, the branching fractions of D + → K + K − π + π + π − and D + → K S 0 K + η are measured with improved precision, yielding values of ( 0.66 ± 0.11 ± 0.03 ) × 10 − 4 and ( 2.27 ± 0.22 ± 0.05 ) × 10 − 4 , respectively. Published by the American Physical Society 2025

Ablikim, M.↗
DOE OSTI2025

Observation of the decay ψ ( 3686 ) → Σ 0 Σ ¯ 0 ω

Using a dataset of ( 27.12 ± 0.14 ) × 10 8 ψ ( 3686 ) events collected by the BESIII detector operating at the BEPCII collider, we report the first observation of the decay ψ ( 3686 ) → Σ 0 Σ ¯ 0 ω with a statistical significance of 8.9 σ . The measured branching fraction is ( 1.24 ± 0.1 6 stat ± 0.1 1 sys ) × 10 − 5 , where the first uncertainty is statistical and the second is systematic. Additionally, we investigate potential intermediate states in the invariant mass distributions of Σ 0 ω , Σ ¯ 0 ω and Σ 0 Σ ¯ 0 . A hint of a resonance is observed in the invariant mass distribution of M Σ 0 ( Σ ¯ 0 ) ω , located around 2.06 GeV / c 2 , with a significance of 2.5 σ . Published by the American Physical Society 2025

Ablikim, M.↗
DOE OSTI2025

Observation of the Charmonium Decay η c → γ γ in J / ψ → γ η c

Using ( 2712.4 ± 14.3 ) × 10 6 ψ ( 3686 ) events collected with the BESIII detector at the BEPCII collider, the decay η c → γ γ in J / ψ → γ η c is observed. We determine the product branching fraction B ( J / ψ → γ η c ) × B ( η c → γ γ ) = ( 5.23 ± 0.2 6 stat ± 0.3 0 syst ) × 10 − 6 . This result is consistent with the lattice QCD calculation ( 5.34 ± 0.16 ) × 10 − 6 from HPQCD in 2023. By using the world-average values of B ( J / ψ → γ η c ) and the total decay width of η c , the partial decay width Γ ( η c → γ γ ) is determined to be ( 11.30 ± 0.5 6 stat ± 0.6 6 syst ± 1.1 4 ref ) keV , which deviates from the corresponding world-average value by 3.4 σ . Published by the American Physical Society 2025

Ablikim, M.↗
DOE OSTI2021

Conductive Metallophthalocyanine Framework Films with High Carrier Mobility as Efficient Chemiresistors

Abstract The poor electrical conductivity of two‐dimensional (2D) crystalline frameworks greatly limits their utilization in optoelectronics and sensor technology. Herein, we describe a conductive metallophthalocyanine‐based NiPc‐CoTAA framework with cobalt(II) tetraaza[14]annulene linkages. The high conjugation across the whole network combined with densely stacked metallophthalocyanine units endows this material with high electrical conductivity, which can be greatly enhanced by doping with iodine. The NiPc‐CoTAA framework was also fabricated as thin films with different thicknesses from 100 to 1000 nm by the steam‐assisted conversion method. These films enabled the detection of low‐concentration gases and exhibited remarkable sensitivity and stability. This study indicates the enormous potential of metallophthalocyanine‐based conductive frameworks in advanced stand‐off chemical sensors and provides a general strategy through tailor‐make molecular design to develop sensitive and stable chemical sensors for the detection of low‐concentration gases.

Yue, Yan↗
DOE OSTI2022

Self‐Assembly of Helical Nanofibrous Chiral Covalent Organic Frameworks

Abstract Despite significant progress on the design and synthesis of covalent organic frameworks (COFs), precise control over microstructures of such materials remains challenging. Herein, two chiral COFs with well‐defined one‐handed double‐helical nanofibrous morphologies were constructed via an unprecedented template‐free method, capitalizing on the diastereoselective formation of aminal linkages. Detailed time‐dependent experiments reveal the spontaneous transformation of initial rod‐like aggregates into the double‐helical microstructures. We have further demonstrated that the helical chirality and circular dichroism signal can be facilely inversed by simply adjusting the amount of acetic acid during synthesis. Moreover, by transferring chirality to achiral fluorescent molecular adsorbents, the helical COF nanostructures can effectively induce circularly polarized luminescence with the highest luminescent asymmetric factor ( g lum ) up to ≈0.01.

Tang, Xihao↗